April 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Travel to supplier and manufacturing locations as needed to support design reviews, product launches, APQP activities, and PPAP approvals. We are seeking an Automotive Product Development Engineer to support the development of NFC and key fob hardware, software, and system solutions.
Sterling Heights, MI8 days ago
Coordinates required APS interfaces with common architecture (i.e. VPS Base Kit) to ensure software efficiencies, commonality, compatibility, and configuration management to include the cost, schedule, and performance planning activities. Leads the engineering activities in support of the APS portfolio (soft kill, hard kill, Counter UAS and threat detection), under Product Manager Vehicle Protection Systems (PdM VPS).
Bachelorās degree in Electrical Engineering, Control Systems Engineering, ā¢ 5-7 years of experience in controls engineering or industrial automation. ā¢ Experience with HMI systems and industrial communication protocols (Ethernet/IP, Modbus, Profibus). ā¢ Knowledge of electrical schematics, instrumentation, and control theory.
p style="margin:0in 0in 8pt;line-height:115%;font-size:12pt;font-family:'aptos' , sans-serif">Ā· Create and maintain up-to-date site IT / IS documentation (infrastructure, inventories, technical/functional documentation, contingency proceduresā¦). Today, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions.
Sterling Heights, MIToday
SSE will assist in conducting trade-off analyses and will integrate contributions from system security engineering disciplines such as anti-tamper, cybersecurity, exportability features, hardware assurance, software assurance, supply chain risk management, and security specialties (personnel security, industrial security, physical security, etc.). Assist in conducting trade-off analyses and will integrate contributions from system security engineering disciplines such as anti-tamper, cybersecurity, exportability features, hardware assurance, software assurance, supply chain risk management; and security specialties (personnel security, industrial security, physical security, etc.).
p>Manufacturing IT Support Engineer Support Associate is responsible for ensuring reliable and efficient operations of physical and virtual servers, private cloud environments, networks, PCs, and other business-critical infrastructure components. This role supports internal users, troubleshoots and escalates infrastructure-related issues, maintains system availability, and assists with user system setup and configuration.
Warren, Michigan25 days ago
p>We are seeking a high performing independent Senior Hardware Design Engineer ā Aggregator to develop winning execution strategies, oversee solutions, resolve issues, and deliver continuous improvement for Aggregators considering quality, cost, and timing. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources.
Sterling Heights, MI21 days ago
Support the overall development of a common Electronic Architecture within GDLS by focusing on detailed electronic hardware design approaches across the full suite of vehicle electronic hardware, including general purpose and AI processors, memory, solid state storage, flat panel displays, graphics/video transport, and others. Headquartered in Reston, Virginia, General Dynamics is a global aerospace and defense company offering a broad portfolio of products and services in business aviation; ship construction and repair; land combat vehicles, weapons systems and munitions; and technology products and services.
Warren, Michigan30+ days ago
p/>PCB Layout Design Engineer would be responsible to develop various PCB layout designs for existing and new architecture-based ECUs, and collaborate with PCBA and ECAD engineers, run simulations, create PCB layouts, participate in design direction meetings, and create a collaborative environment with internal and external team members.
The ECU hardware design teamās mission is to ensure our products are designed to target the growing needs of our customers while ensuring robust, well-designed hardware which meets GM specifications and testing requirements from early hardware through the production design.
Auburn Hills, MI30+ days ago
With over 70 years of excellence, Womack's motion control expertise meets Morrell's premier component integration, creating a dynamic force committed to innovation and customer service. Womack Machine Supply and Morrell Group have united to become Evolution Motion Solutions, an industry powerhouse in engineering and industrial solutions.
Ann Arbor, MI30+ days ago
p>The Base Hardware team will be responsible for authoring, maintaining and analyzing technical requirements, and working across the product lifecycle to ensure stakeholder alignment and successful test/validation of the hardware components. - Bachelors degree in Electrical Engineering, Hardware Engineering, Computer Engineering or related field and 5+ years experience OR Master's degree in a related field and 3 +years experience.
Warren, Michigan9 days ago
Our Semiconductor Engineering team is a dynamic, high-energy, and innovative group focused on design and commercialization of leading-edge silicon enabling the future of GMās Software Defined Vehicle (SDV) platformsācentral compute units, connectivity modules, and other controllers. You will collaborate with internal teams and silicon vendors to analyze SoC capabilities, influence selection decisions, and ensure seamless bring-up from schematic design through early testing and production.
Warren, Michigan4 days ago
We are seeking a Staff Hardware Engineerā GNSS to lead the definition, design, and validation of GNSS (Global Navigation Satellite System) solutions for our current and future generations of connectivity and compute platforms across a broad range of vehicles. This role will serve as the subject matter expert for GNSS hardware and system performance, working closely with product, systems, RF, hardware design, suppliers, and validation teams to deliver robust, automotive-grade GNSS solutions.
p>We are seeking a high performing independent Senior Hardware Design Engineer - Aggregator to develop winning execution strategies, oversee solutions, resolve issues, and deliver continuous improvement for Aggregators considering quality, cost, and timing. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more.
p>Master's degree or foreign equivalent in Power Electronics, Electrical and Computer Engineering or related field and 2 years of experience in the job offered or related occupation. For a detailed look at our benefits, click here:
https://fordcareers.co/GSR-HTHD.
Warren, Michigan23 days ago
p>In this role you are expected to have a high level of technical proficiency in developing and managing requirements and providing technical leadership to perform ongoing development, maintenance, and configuration management of CTRS requirements that support various build-to-spec and build-to-print ECU designs across GMās diverse portfolio of vehicles and electrical architectures (including electrification / Electric Vehicle ECU designs). Our team is looking for a creative and highly energetic ECU Hardware Requirements & Specifications Engineer who can lead the development and management of hardware requirements, low-level software definition and specification for ECU Hardware Component Technical Requirements Specifications (CTRS).
Warren, Michigan30+ days ago
p>In this role you are expected to have a high level of technical proficiency in developing and managing requirements and providing technical leadership to perform ongoing development, maintenance, and configuration management of CTRS requirements that support various build-to-spec and build-to-print ECU designs across GMās diverse portfolio of vehicles and electrical architectures (including electrification / Electric Vehicle ECU designs). Our team is looking for a creative and highly energetic ECU Hardware Requirements & Specifications Engineer who can lead the development and management of hardware requirements, low-level software definition and specification for ECU Hardware Component Technical Requirements Specifications (CTRS).
Warren, Michigan15 days ago
Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Analyze and validate multiāradio coexistence across WiāFi/BT and neighboring radios (e.g., UWB, LTE/5G, GNSS, NFC and other radios) in shared modules, focusing on desense, blocking, intermodulation, and noise coupling paths.
p>When you join the Latitude team, you'll work alongside leading experts across machine learning and robotics, cloud platforms, mapping, sensors and compute systems, test operations, systems and safety engineering - all dedicated to making a real, positive impact on the driving experience for millions of people. Reliability Engineering: Conduct environmental and mechanical stress testing (thermal cycling, vibration/shock, humidity, ingress protection, and EMC/EMI) to determine Mean Time To Failure (MTTF) and ensure 10-year/150,000-mile durability.
Auburn Hills, MI30+ days ago
li>Integration and Testing: Collaborate with hardware engineers to integrate software components with MCU hardware platforms and conduct unit testing integration testing and validation to ensure software reliability and functionality. Real-Time Operating Systems (RTOS) Integration: Integrate real-time operating systems such as AUTOSAR or proprietary RTOS into the MCU software architecture to support multi-tasking and real-time scheduling requirements.
Warren, Michigan3 days ago
ul>Define end-to-end hardware test strategies and structured bring-up plans for SoCs and associated components (memory, power) across EVKs, reference boards, and ECUs, including power-on sequencing, clock/reset validation, basic sanity, interface bring-up, regression suites, coverage goals, and clear pass/fail criteria. Our Semiconductor Engineering team is a dynamic, highāenergy, and innovative group focused on design and commercialization of leadingāedge silicon enabling the future of GMās Software Defined Vehicle (SDV) platforms ā central compute units, connectivity modules, and other controllers.
Warren, Michigan10 days ago
Design of propulsion controller electrical hardware: from schematic capture, worst case analysis, PCB layout, bring-up, debug, signal integrity and power integrity (SI/PI), design verification test (environmental and EMC), to manufacturing support and production launch. We are seeking a highly experienced, technical engineer in propulsion hardware and electrical design as we continue to staff a hardware engineering team that will own the end-to-end design and development of our propulsion controller hardware.
Warren, Michigan21 days ago
p>Our Semiconductor Engineering team is a dynamic, highāenergy, and innovative group focused on design and commercialization of leadingāedge silicon enabling the future of GMās Software Defined Vehicle (SDV) platforms ā centra. You will be responsible for MCUācentric performance modeling, analysis, and correlation, including workload and benchmark definition, silicon performance simulations, measurement and debug to ensure our MCU platforms meet functional, performance, efficiency, and realātime requirements from concept through production.
Auburn Hills, Michigan4 days ago
p>The engineer will work closely with systems, software, mechanical, manufacturing, and validation teams throughout the product development lifecycle, supporting architecture definition, schematic design, PCB development, hardware integration, troubleshooting, and technical problem resolution. Weāre ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to lifeāfrom advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
Auburn Hills, MI30+ days ago
CEESEAAD Cost Engineer - Infotainment & Hardware Design develops direct material costs and tooling investments for Electrical and Electronics components using activity-based costing methodology while working from bill of materials, drawings and/or samples. Key deliverables: Development of component costs for new programs ("cost engineering estimate" at initial concept; "should cost calculation" through bottom-up approach for new & modified purchased components based on the 'how it's made' manufacturing process).
Southgate, Washington30+ days ago
ul>Design FPGA-based digital boards interfacing to beamforming ASIC carrier boards with high-speed control interfaces and precision clock distribution, digital interface and timing distribution boards connecting back-end processing to phased array antenna modules, and mixed-signal payload integration assemblies managing power, clocking, and inter-board data routing. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Our Semiconductor Technology Engineering team is a dynamic, high-energy, and innovative group focused on design and commercialization of leading-edge hardware enabling the future of GM's vehicle architecture. This hardware engineer position will be dependent on building strong partnerships with both internal team members responsible for electronic control unit (ECU) design, as well as semiconductor partner(s).
p>PCB Layout Design Engineer would be responsible to develop various PCB layout designs for existing and new architecture-based ECUs, and collaborate with PCBA and ECAD engineers, run simulations, create PCB layouts, participate in design direction meetings, and create a collaborative environment with internal and external team members. The ECU hardware design team's mission is to ensure our products are designed to target the growing needs of our customers while ensuring robust, well-designed hardware which meets GM specifications and testing requirements from early hardware through the production design.
This role is responsible for establishing best-in-class processes, creating and approving schematic symbols and PCB footprints, and building a scalable, high-quality library infrastructure that supports global hardware development. The Compute & Connectivity Hardware team leads the electrical design and integration of next-generation ECUs supporting GM's Software Defined Vehicle (SDV) architecture.
The ideal candidate has deep, hands-on experience developing and executing component- and system-level test plans for systems involving high-performance computing and wireless interfaces, plus a proven track record of leading and mentoring engineers, and influencing cross-functional direction. This role is tightly coupled to cross-functional teams, including mechanical designers, PCB layout, product managers, RF/Wireless and systems engineers, suppliers, and software/firmware teams, to:
- Create secure and reliable Connectivity solutions.
Warren, Michigan10 days ago
You will lead DFx strategy and execution for electrical controllers supporting GMās Software Defined Vehicle (SDV) architecture, while building strong, cross-functional partnerships to ensure successful product delivery. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. #LI-JK3.
Sterling Heights, MI30+ days ago
p>The Staff Electrical Hardware Engineer will support the development of ruggedized electrical hardware and circuit board assemblies used in advanced defense vehicle computing and interface products. This role supports the full product lifecycle from requirements development through design, debug, testing, qualification, and production release.
This role is tightly coupled to cross-functional teams, including mechanical designers, PCB layout, product managers, RF/Wireless and systems engineers, to create secure and reliable Connectivity solutions and assist in defining future technology roadmaps and resolution of issues that arise throughout development and production. The Role: The Senior Hardware Engineer will be responsible to develop and implement detailed validation plans to verify schematic design, PCB layout, performance functional and electrical validation of all interfaces, and support issue resolution, of hardware components and systems that support Connectivity technologies across all GM vehicles and architectures.
BS in Mechanical Engineering, Electrical Engineering, Computer Engineering, Biomedical Engineering, Computer Science, Math, Physics BS in Mechanical Engineering, Electrical Engineering, Computer Engineering, Biomedical Engineering, Computer Science, Math, Physics. ā¢ MS in Mechanical Engineering, Electrical Engineering, Computer Engineering, Biomedical Engineering, Computer Science, Math, Physics MS in Mechanical Engineering, Electrical Engineering, Computer Engineering, Biomedical Engineering, Computer Science, Math, Physics.
Auburn Hills, MI30+ days ago
Evolution Motion Solutions is the leading engineering partner, systems integrator, and value-add distributor of advanced hydraulic, electromechanical, pneumatic, and automation technologies. Ā· Develop the electrical diagrams to include power distribution, magnetics, I/O, HMI, electrical panels, motor control circuits, safety circuits, etc.
Warren, Michigan21 days ago
p/>Our Semiconductor Engineering team is a dynamic, highāenergy, and innovative group focused on design and commercialization of leadingāedge silicon enabling the future of GMās Software Defined Vehicle (SDV) platforms ā central compute units, connectivity modules, and other controllers.
You will be responsible for MCU and MCUācentric ECU board bringāup, test plan creation, automated test development, and systematic debug to ensure our silicon and hardware platforms meet functional, performance, and reliability goals from early samples through production.
We are seeking a Staff Hardware Engineer- GNSS to lead the definition, design, and validation of GNSS (Global Navigation Satellite System) solutions for our current and future generations of connectivity and compute platforms across a broad range of vehicles. This role will serve as the subject matter expert for GNSS hardware and system performance, working closely with product, systems, RF, hardware design, suppliers, and validation teams to deliver robust, automotive-grade GNSS solutions.
Our Semiconductor Engineering team is a dynamic, high-energy, and innovative group focused on design and commercialization of leading-edge silicon enabling the future of GM's Software Defined Vehicle (SDV) platforms-central compute units, connectivity modules, and other controllers. You will collaborate with internal teams and silicon vendors to analyze SoC capabilities, influence selection decisions, and ensure seamless bring-up from schematic design through early testing and production.
When you join the Latitude team, you'll work alongside leading experts across machine learning and robotics, cloud platforms, mapping, sensors and compute systems, test operations, systems and safety engineering - all dedicated to making a real, positive impact on the driving experience for millions of people. What you'll need to succeed: Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, Robotics or a related field and 7+ years of relevant experience (or Master's degree and 5+ years of relevant experience, or PhD and 2+ years of relevant experience).
p>When you join the Latitude team, you'll work alongside leading experts across machine learning and robotics, cloud platforms, mapping, sensors and compute systems, test operations, systems and safety engineering - all dedicated to making a real, positive impact on the driving experience for millions of people. What you'll need to succeed:
Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, Robotics or a related field and 7+ years of relevant experience (or Master's degree and 5+ years of relevant experience, or PhD and 2+ years of relevant experience).
Sterling Heights, MI30+ days ago
p>Headquartered in Reston, Virginia, General Dynamics is a global aerospace and defense company offering a broad portfolio of products and services in business aviation; ship construction and repair; land combat vehicles, weapons systems and munitions; and technology products and services. Description: Position Overview: General Dynamics Land Systems, part of General Dynamics, is seeking an Electrical Power Hardware Engineer to lead the design, development, and integration of smart High and Low Voltage Electrical Power Storage and Power Management Hardware solutions.
Sterling Heights, MI30+ days ago
Headquartered in Reston, Virginia, General Dynamics is a global aerospace and defense company offering a broad portfolio of products and services in business aviation; ship construction and repair; land combat vehicles, weapons systems and munitions; and technology products and services. Position Overview: General Dynamics Land Systems is seeking an Electrical Power Hardware Senior/Lead Engineer to lead the design, development, and integration of Motor/Generator and Power Electronics solutions in the Electrification and Electrical Power domains.
Milford, Michigan30 days ago
p>As a Senior HIL (Hardware-in-the-Loop) Engineer in VMEC Electrification New Markets, your main responsibilities will include: - Work closely with system engineering, software development, calibration, testing and validation stakeholders to identify solutions to customer needs.
As a Senior HIL (Hardware-in-the-Loop) Engineer, you will play a critical role in defining, developing, deploying, and maintaining hardware in the loop environments to enable development, verification and validation of embedded controls software and calibrations.
Warren, Michigan8 days ago
The engineer will be responsible for the architecture and performance optimization of light management films including DBEF (Dual Brightness Enhancement Film), BEF (Brightness Enhancement Film), diffuser films, prism films, polarizers, and compensation films. We are seeking a high-performing LCD Optical Architecture Engineer to lead the specification, selection, and validation of optical film components used in LCD modules for our next-generation displays.
The Role: In this role you are expected to have a high level of technical proficiency in developing and managing requirements and providing technical leadership to perform ongoing development, maintenance, and configuration management of CTRS requirements that support various build-to-spec and build-to-print ECU designs across GM's diverse portfolio of vehicles and electrical architectures (including electrification / Electric Vehicle ECU designs). Our team is looking for a creative and highly energetic ECU Hardware Requirements & Specifications Engineer who can lead the development and management of hardware requirements, low-level software definition and specification for ECU Hardware Component Technical Requirements Specifications (CTRS).
p>The Role: In this role you are expected to have a high level of technical proficiency in developing and managing requirements and providing technical leadership to perform ongoing development, maintenance, and configuration management of CTRS requirements that support various build-to-spec and build-to-print ECU designs across GM's diverse portfolio of vehicles and electrical architectures (including electrification / Electric Vehicle ECU designs). Our team is looking for a creative and highly energetic ECU Hardware Requirements & Specifications Engineer who can lead the development and management of hardware requirements, low-level software definition and specification for ECU Hardware Component Technical Requirements Specifications (CTRS).