HVAC Service Technician Yellowstone LocalHVAC Service TechnicianStamford, CT$28–$65As an HVAC Service Technician in Norwalk, Connecticut, you will: Diagnose, service, and repair residential heating and cooling systems. If you're the kind of technician who takes pride in solving problems, delivering quality work, and building trust with homeowners, this is an opportunity to grow with a company that values your expertise.
NewFleet Technician II, Journeyman - Hiring Immediately SyscoFleet Technician II, Journeyman - Hiring ImmediatelyJERSEY CITY, NJ$24.86–$37.26 / hourPerform required inspections and preventive maintenance on vehicles and equipment (Tractors, Trailers, Convertor Dollies, Lift Gates, Light Duty Vehicles) to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet to include, but not limited to First Article Inspection (FAI)/Commercial Vehicle Inspection (CVI) (Annual) Inspections, Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment, perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles and any company-owned equipment. Perform maintenance repairs on all vehicles such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, and quality manner, addressing all Driver Vehicle Inspection Report (VIR) write-ups timely, efficiently and correctly the first time, diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, Heating, Ventilation, and Air Conditioning (HVAC) systems and lift-gate hydraulic, mechanical and electrical systems.
NewFleet Technician II, Journeyman - Career Growth Opportunities SyscoFleet Technician II, Journeyman - Career Growth OpportunitiesJERSEY CITY, NJ$24.86–$37.26 / hourPerform required inspections and preventive maintenance on vehicles and equipment (Tractors, Trailers, Convertor Dollies, Lift Gates, Light Duty Vehicles) to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet to include, but not limited to First Article Inspection (FAI)/Commercial Vehicle Inspection (CVI) (Annual) Inspections, Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment, perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles and any company-owned equipment. Perform maintenance repairs on all vehicles such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, and quality manner, addressing all Driver Vehicle Inspection Report (VIR) write-ups timely, efficiently and correctly the first time, diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, Heating, Ventilation, and Air Conditioning (HVAC) systems and lift-gate hydraulic, mechanical and electrical systems.
NewFleet Technician II, Journeyman SyscoFleet Technician II, JourneymanJERSEY CITY, NJ$24.86–$37.26 / hourPerform required inspections and preventive maintenance on vehicles and equipment (Tractors, Trailers, Convertor Dollies, Lift Gates, Light Duty Vehicles) to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet to include, but not limited to First Article Inspection (FAI)/Commercial Vehicle Inspection (CVI) (Annual) Inspections, Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment, perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles and any company-owned equipment. Perform maintenance repairs on all vehicles such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, and quality manner, addressing all Driver Vehicle Inspection Report (VIR) write-ups timely, efficiently and correctly the first time, diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, Heating, Ventilation, and Air Conditioning (HVAC) systems and lift-gate hydraulic, mechanical and electrical systems.
NewEngineering Technician System OneEngineering TechnicianSouth Plainfield, NJ$25 / hourSystem One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. Qualifications: Bachelor’s degree or above in Materials Science, Chemistry, Chemical Engineering, Electrical Engineering, or Mechanical Engineering.
Lab Maintenance Technician Diedre Moire Corp.Lab Maintenance TechnicianYonkers, NY$90,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Seeking experience installing, troubleshooting, tuning, and repairing precision analytical instruments performing High Performance Liquid Chromatography, Gas Chromatography, Spectrometry, Elemental Analysis, or other.
Travel Respiratory Therapy Technician in New Brunswick, NJ Concentric Healthcare StaffingTravel Respiratory Therapy Technician in New Brunswick, NJNew Brunswick, NJKey Responsibilities Perform blood gas analysis, ventilator management, BiPAP, and high-flow oxygen initiation and ongoing management. Why Join Us First-time travelers are welcome, offering an accessible entry point into travel respiratory therapy.
Refrigeration Service Technician - Commercial & Industrial CoolSysRefrigeration Service Technician - Commercial & IndustrialWhite Plains, NY$27–$46Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors.
Electronics Technician Diedre Moire Corp.Electronics TechnicianEast Orange, NJ$90,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Metrology Metrologist Field Service Tech Technician Engineer Install Repair Calibrate Maintain Validate Maintenance Laboratory Instrument Instrumentation LCMS HPLC GC MS GCMS GC/MS LCMS LC/MS Gas Chromatography Mass Spec Spectrometry - .
Experienced Aeroderivative Gas Turbine Technician FieldCore Service Solutions LLCExperienced Aeroderivative Gas Turbine TechnicianNY$37–$62.21 / hourGE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. As part of the Gas Power One Field Services team, FieldCore installs, maintains and upgrades power generation equipment, enabling operators of the world's energy infrastructure to provide more reliable and affordable energy.
Optical Gas Imaging Technician Alliance Technical GroupOptical Gas Imaging TechnicianMountainside, NJ$25–$30 / hourLocations: Texas, California, Tennessee, Georgia, Illinois, South Carolina, Wyoming, Louisiana, Kansas, Colorado, Arkansas, New Mexico, Oklahoma, Pennsylvania, New Jersey, Ohio, Delaware, Indiana, Florida. The OGI team is responsible for performing inspections on various types of facilities in the Oil and Gas Industry to identify and quantify gas leaks and vents.
Natural Gas Field Mechanical Technician (NY) SPX Technologies IncNatural Gas Field Mechanical Technician (NY)New York, NYAs a Natural Gas Field Mechanical Technician, you will operate and maintain a proprietary robotic system called CISBOT, an innovative technology designed to perform critical repairs from within buried natural gas pipelines. This is a unique opportunity to work in a dynamic outdoor utility construction environment alongside talented professionals while contributing to methane leak reduction and supporting a cleaner, more sustainable energy infrastructure.
Fleet Technician (Gas) First StudentFleet Technician (Gas)Brooklyn, New YorkIn the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. As a gas-powered vehicle Mechanic with First Student, you will help maintain and repair Ford E-350, Ford E-450, Ford Transit, and Ford 2024 EV.
Gas Service/Fusion Inspection Technician (Substantial Pay Increases Within 24 Months) ReconnGas Service/Fusion Inspection Technician (Substantial Pay Increases Within 24 Months)New York City, New YorkOur Fusion Inspection Technicians are responsible for performing a visual inspection on plastic gas pipe fusions and joints, collecting GPS coordinates on gas pipe fusions and related equipment, collection of tracking and traceability data on client gas assets, and reporting abnormal operating conditions that may exist. As leaders in the utility industry concentrating, on quality and safety, RECONN is looking for people to join our team who are problem solvers, take pride in public safety and are comfortable in a fast paced, exciting work environment.
NewSenior HVAC Technician UNCOMMON SCHOOLS, INC.Senior HVAC TechnicianNewark, NJ$43–$50 / hourThis position provides an opportunity for an experienced HVAC technician with at least seven (7) years'' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. With expertise in HVAC - and to a lesser extent in construction and plumbing - in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget.
Senior Engineer, Gas Planning and Design Engineering National Grid PlcSenior Engineer, Gas Planning and Design EngineeringStaten Island, NY$136,000–$159,000 / yearPlease be advised that due to the nature of this position, incumbents are subject to federal Drug & Alcohol safety regulations governing US Department of Transportation ("DOT") covered positions, including the Federal Motor Carrier Safety Administration (FMCSA) and Pipeline Hazardous Material Safety Administration (PHMSA). Develops and maintains corrosion control engineering programs for gas transmission, distribution, production and storage facilities, to achieve and sustain compliance with federal and state regulations.
Senior Natural Gas Scheduler South Jersey Industries IncSenior Natural Gas SchedulerNJ$84,375–$135,000 / yearRegardless of the position, mentoring and networking, hands-on experience, gaining industry knowledge and the opportunity to make a meaningful impact on our business and in our communities are all exciting ways that we welcome our employees at SJI. NOTE: This position requires working before/after regular office hours including some work during holidays and weekends as well as travel to the Folsom, NJ office every other month for four consecutive days.
Oil & Gas/ Mining Project Opportunities GHD Group Pty LtdOil & Gas/ Mining Project OpportunitiesRYE, NYGHD will reimburse 50% of the cost of the following to maximum of $250.00 reimbursement annually for such items as: Health club membership fees, Home exercise equipment purchases, Bicycles, Race, run & marathon entrance fees, Smoking cessation programs, Weight loss programs (i.e.-Weight Watchers, Jenny Craig), Fitbits and Fitness Tracking devices. This posting serves as a talent pipeline for qualified professionals across a broad range of disciplines, including but not limited to support staff, operators, technicians, scientists, project managers, and regulatory professionals.
Gas & Electric Utility Locator USIC Locating Services, Inc.Gas & Electric Utility LocatorManhattan, NYWe are America's leader in underground utility damage prevention and advanced infrastructure services, performing more than 84 million locates each year for the more than 1,400 telecommunications, electric, gas, water, and sewer utilities and municipalities we serve nationwide. Your Responsibilities as a Locator: Correctly, safely, and efficiently locate underground utilities, including telecommunications, electric power, cable TV, gas, water, and sewer systems.
NewGas & Electric Utility Locator USICGas & Electric Utility LocatorNew York City, New YorkWe are America’s leader in underground utility damage prevention and advanced infrastructure services, performing more than 84 million locates each year for the more than 1,400 telecommunications, electric, gas, water, and sewer utilities and municipalities we serve nationwide. Education Partnership & Scholarship Program – Discounted tuition for USIC employees, their spouses, and dependents through Indiana Tech (courses available online nationwide).
Assistant, Mechanic/Technician Waste Management IncAssistant, Mechanic/TechnicianNewark, NJ$23.79–$29.72 / hourWM has the largest disposal network and collection fleet in North America, is the largest recycler of post‑consumer materials and is a leader in beneficial use of landfill gas, with a growing network of renewable natural gas plants and the most landfill gas‑to‑electricity plants in North America. Perform Preventive Maintenance: Execute routine maintenance tasks, including oil changes, component lubrication, fluid checks, filter and wiper blade replacements, and inspections, to prevent breakdowns and prolong the lifespan of vehicles and equipment.
Field Service Technician HiFyveField Service TechnicianSpring Valley, New YorkThis is a field service role focused on diagnosing, repairing, and maintaining commercial cooking equipment in restaurants, hotels, institutional kitchens, and foodservice facilities. We are seeking an experienced Hot-Side Kitchen Appliance Service Technician to support commercial clients throughout Manhattan and the NYC boroughs .
Service Technician Suburban Propane Partners LPService TechnicianWhippany, NJ$25.40–$31.70 / hourHeadquartered in Whippany, New Jersey, Suburban Propane has been in the customer service business since 1928 and is a nationwide distributor of propane, renewable propane, renewable natural gas ("RNG"), fuel oil and related products and services, as well as a marketer of natural gas and electricity and producer of and investor in low carbon fuel alternatives, servicing the energy needs of approximately 1 million residential, commercial, governmental, industrial and agricultural customers through approximately 700 locations across 42 states. To operate our company vehicles, you must have a minimum of a Class B Commercial Driver's License (CDL) with HAZMAT, tanker, and air brake endorsements as well as a valid Medical Examiner's Certificate allowing for operation in interstate commerce.
Utility Inspection Technician (Incentive Opportunities!) ReconnUtility Inspection Technician (Incentive Opportunities!)New York City, New YorkWhile on-site, technicians will also be responsible for identifying any abnormal operating conditions, notifying appropriate company personnel, and accurately filling out all forms associated with the inspection visit (form may be electronic or paper). As leaders in the utility industry concentrating, on quality and safety, RECONN is looking for people to join our team who are problem solvers, take pride in public safety and are comfortable in a fast paced, exciting work environment.
Assistant, Plant Maintenance Technician Transfer Stations Waste Management IncAssistant, Plant Maintenance Technician Transfer StationsElizabeth, NJWM has the largest disposal network and collection fleet in North America, is the largest recycler of post-consumer materials and is a leader in beneficial use of landfill gas, with a growing network of renewable natural gas plants and the most landfill gas-to-electricity plants in North America. The Plant Maintenance Technician Assistant works under direct and performs limited preventive maintenance assignments, completes minor repairs and assists in major repairs.
Assistant, Plant Maintenance Technician MRF Waste Management IncAssistant, Plant Maintenance Technician MRFNewark, NJWM has the largest disposal network and collection fleet in North America, is the largest recycler of post-consumer materials and is the leader in beneficial reuse of landfill gas, with a growing network of renewable natural gas plants and the most gas-to-electricity plants in North America. The Plant Maintenance Technician Assistant works under direct and performs limited preventive maintenance assignments, completes minor repairs and assists in major repairs.
Waste Technician RX Waste Management IncWaste Technician RXNYWM has the largest disposal network and collection fleet in North America, is the largest recycler of post-consumer materials and is the leader in beneficial reuse of landfill gas, with a growing network of renewable natural gas plants and the most gas-to-electricity plants in North America. WMs fleet includes nearly 11,000 natural gas trucks - the largest heavy-duty natural gas truck fleet of its kind in North America - where more than half are fueled by renewable natural gas.
Plant Maintenance Technician, Senior - Industrial Waste Management IncPlant Maintenance Technician, Senior - IndustrialNJPerforms routine, preventive, corrective, and scheduled maintenance on a variety of machinery within the plant including but not limited to: Autoclave process equipment/systems maintenance, including controls, Process Logic Controllers (PLC), combustion air blowers, pressure controls and conveyance systems. WM has the largest disposal network and collection fleet in North America, is the largest recycler of post‑consumer materials and is a leader in beneficial use of landfill gas, with a growing network of renewable natural gas plants and the most landfill gas‑to‑electricity plants in North America.
Senior, Plant Maintenance Technician - Industrial Waste Management IncSenior, Plant Maintenance Technician - IndustrialNJPerforms routine, preventive, corrective, and scheduled maintenance on a variety of machinery within the plant including but not limited to: Autoclave process equipment/systems maintenance, including controls, Process Logic Controllers (PLC), combustion air blowers, pressure controls and conveyance systems. WM has the largest disposal network and collection fleet in North America, is the largest recycler of post‑consumer materials and is a leader in beneficial use of landfill gas, with a growing network of renewable natural gas plants and the most landfill gas‑to‑electricity plants in North America.
Quality Technician (3rd Shift) Howmet Aerospace IncQuality Technician (3rd Shift)Dover, NJ$26–$30 / hourTo learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation.
Production Worker (Melter Technician - Weekend Nights Shift) Howmet Aerospace IncProduction Worker (Melter Technician - Weekend Nights Shift)Dover, NJ$24–$26 / hourMelting unit operation (pumps blower's etc.); Monitor operation of equipment and perform adjustments as needed to insure equipment effectiveness; Furnish Lab prelim requirements; Document and maintain accurate records and logs; Maintain a clean and orderly work environment; Perform minor and preventative maintenance on equipment; Install, remove, and monitor operation of preheat torches; Follow all Melting techniques (Al's, Melt Practices); Perform metal weighing of additions (if qualified) and verify prelim additions are correct; Some data entry of melt card/log required; May be required to assist on multiple furnaces during a workday; Perform coil changes which will include confined space, LTV and operating the overhead crane to remove and install coils; Perform emergency and remedial procedures which may arise during the melting process; Spout and entry changes; Run the tube cleaner and keep area clean; Hot top molds and clean molds as required; Any other duties as assigned by Team Leader/Supervision; Assist in the training of new team members as needed; After training must be capable of running the "A", "B", "C" and W units. Coordinate shift and shift-to-shift communication activities during furnace changes, with melt team and maintenance; Record the progression of furnace changes on furnace change sheet and report any problems encountered to shift team leader; Pass on status of furnace change to the next shift melt team members and supervision; Complete furnace change safety audits: Confined Space.
Production Worker (Crystal Verification Technician - 2nd Shift) Howmet Aerospace IncProduction Worker (Crystal Verification Technician - 2nd Shift)Dover, NJ$23–$25.50 / hourWe excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report.
Production Worker (Crystal Verification Technician - 3rd Shift) Howmet Aerospace IncProduction Worker (Crystal Verification Technician - 3rd Shift)Dover, NJ$23–$25.50 / hourWe excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report.
Production Worker (Melter Technician - 3rd Shift) Howmet Aerospace IncProduction Worker (Melter Technician - 3rd Shift)Dover, NJ$24–$26 / hourMelting unit operation (pumps blower's etc.); Monitor operation of equipment and perform adjustments as needed to insure equipment effectiveness; Furnish Lab prelim requirements; Document and maintain accurate records and logs; Maintain a clean and orderly work environment; Perform minor and preventative maintenance on equipment; Install, remove, and monitor operation of preheat torches; Follow all Melting techniques (Al's, Melt Practices); Perform metal weighing of additions (if qualified) and verify prelim additions are correct; Some data entry of melt card/log required; May be required to assist on multiple furnaces during a workday; Perform coil changes which will include confined space, LTV and operating the overhead crane to remove and install coils; Perform emergency and remedial procedures which may arise during the melting process; Spout and entry changes; Run the tube cleaner and keep area clean; Hot top molds and clean molds as required; Any other duties as assigned by Team Leader/Supervision; Assist in the training of new team members as needed; After training must be capable of running the "A", "B", "C" and W units. Coordinate shift and shift-to-shift communication activities during furnace changes, with melt team and maintenance; Record the progression of furnace changes on furnace change sheet and report any problems encountered to shift team leader; Pass on status of furnace change to the next shift melt team members and supervision; Complete furnace change safety audits: Confined Space.
Corrosion Technician MasTec Advanced TechnologiesCorrosion TechnicianJERSEY CITY, NJThis position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding.
Commercial HVAC Service Technician REICCommercial HVAC Service TechnicianSouth Plainfield, NJFull timeREIC Rentals is hiring safety- and customer-driven Commercial HVAC Service Technicians to serve as trusted technical experts responsible for keeping our high-performance rental fleet operating at peak performance. From heating and cooling to dehumidification, ventilation, and environmental control equipment, your work ensures our equipment is safe, reliable, and always customer-ready-both in the shop and at customer sites.
Production Worker (Melter Technician - Weekend Nights Shift) Howmet AerospaceProduction Worker (Melter Technician - Weekend Nights Shift)Dover, NJ$24–$26 / hourMelting unit operation (pumps blower’s etc.); Monitor operation of equipment and perform adjustments as needed to insure equipment effectiveness; Furnish Lab prelim requirements; Document and maintain accurate records and logs; Maintain a clean and orderly work environment; Perform minor and preventative maintenance on equipment; Install, remove, and monitor operation of preheat torches; Follow all Melting techniques (Al’s, Melt Practices); Perform metal weighing of additions (if qualified) and verify prelim additions are correct; Some data entry of melt card/log required; May be required to assist on multiple furnaces during a workday; Perform coil changes which will include confined space, LTV and operating the overhead crane to remove and install coils; Perform emergency and remedial procedures which may arise during the melting process; Spout and entry changes; Run the tube cleaner and keep area clean; Hot top molds and clean molds as required; Any other duties as assigned by Team Leader/Supervision; Assist in the training of new team members as needed; After training must be capable of running the “A”, “B”, “C” and W units. Coordinate shift and shift-to-shift communication activities during furnace changes, with melt team and maintenance; Record the progression of furnace changes on furnace change sheet and report any problems encountered to shift team leader; Pass on status of furnace change to the next shift melt team members and supervision; Complete furnace change safety audits: Confined Space.
Production Worker (Melter Technician - 2nd Shift ) Howmet AerospaceProduction Worker (Melter Technician - 2nd Shift )Dover, NJ$24–$26 / hourMelting unit operation (pumps blower’s etc.); Monitor operation of equipment and perform adjustments as needed to insure equipment effectiveness; Furnish Lab prelim requirements; Document and maintain accurate records and logs; Maintain a clean and orderly work environment; Perform minor and preventative maintenance on equipment; Install, remove, and monitor operation of preheat torches; Follow all Melting techniques (Al’s, Melt Practices); Perform metal weighing of additions (if qualified) and verify prelim additions are correct; Some data entry of melt card/log required; May be required to assist on multiple furnaces during a workday; Perform coil changes which will include confined space, LTV and operating the overhead crane to remove and install coils; Perform emergency and remedial procedures which may arise during the melting process; Spout and entry changes; Run the tube cleaner and keep area clean; Hot top molds and clean molds as required; Any other duties as assigned by Team Leader/Supervision; Assist in the training of new team members as needed; After training must be capable of running the “A”, “B”, “C” and W units. Coordinate shift and shift-to-shift communication activities during furnace changes, with melt team and maintenance; Record the progression of furnace changes on furnace change sheet and report any problems encountered to shift team leader; Pass on status of furnace change to the next shift melt team members and supervision; Complete furnace change safety audits: Confined Space.
HVAC Technician (Off Shift) Howmet AerospaceHVAC Technician (Off Shift)Dover, NJ$28–$33 / hourFollow: LinkedIn , Twitter , Instagram , Facebook , and YouTube . To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Production Worker (Crystal Verification Technician - 3rd Shift) Howmet AerospaceProduction Worker (Crystal Verification Technician - 3rd Shift)Dover, NJ$23–$25.50 / hourFollow: LinkedIn , Twitter , Instagram , Facebook , and YouTube . To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Quality Technician (3rd Shift) Howmet AerospaceQuality Technician (3rd Shift)Dover, NJ$26–$30 / hourTo learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation.
Automotive Technician A or B Level Up To $104K+ - 2312 PromotiveAutomotive Technician A or B Level Up To $104K+ - 2312Stamford, CT$25–$50 / hourThe shop features factory-level diagnostic capabilities for Mercedes-Benz, Ford, Toyota, Lexus, Chrysler, Dodge, General Motors, BMW, Audi, Volkswagen, Porsche, Jaguar, and Land Rover. Technicians work on a diverse mix of European, Domestic, Asian, gas, diesel, hybrid, and commercial fleet vehicles, including a large volume of Mercedes-Benz Sprinter vans.
Corrosion Technician MasTec Utility ServicesCorrosion TechnicianNEWARK, New JerseyFull timeThis position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding.
Service Technician Suburban PropaneService TechnicianWhippany, New Jersey$25.40–$31.70 / hourFull timeHeadquartered in Whippany, New Jersey, Suburban Propane has been in the customer service business since 1928 and is a nationwide distributor of propane, renewable propane, renewable natural gas ("RNG"), fuel oil and related products and services, as well as a marketer of natural gas and electricity and producer of and investor in low carbon fuel alternatives, servicing the energy needs of approximately 1 million residential, commercial, governmental, industrial and agricultural customers through approximately 700 locations across 42 states. Qualifications: To operate our company vehicles, you must have a minimum of a Class B Commercial Driver’s License (CDL) with HAZMAT, tanker, and air brake endorsements as well as a valid Medical Examiner’s Certificate allowing for operation in interstate commerce.
Corrosion Technician MasTec IncCorrosion TechnicianPaterson, NJPhysical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding.
Skillbridge Fellowship - Industrial Maintenance Technician Tyson Foods IncSkillbridge Fellowship - Industrial Maintenance TechnicianNJRelevant Backgrounds May Include (Not Required): Army: 91B (Wheeled Vehicle Mechanic), 91D (Power Generation Equipment Repairer), 91E (Allied Trades Specialist), 91C (Utilities Equipment Repairer), 15T (UH-60 Helicopter Repairer). Tyson Foods proudly supports the Department of Defense SkillBridge program and invites transitioning service members to join our team as an Equipment Maintenance Fellow.
Power Generator Technician GenServe Inc. (Inactive)Power Generator TechnicianPlainview, NYEstablished in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and a growing presence across the U.S. Through a combination of organic growth and strategic acquisitions, GenServe is rapidly expanding its national footprint as a one-stop shop for generator solutions. Opportunities for Growth: Generator Technicians at GenServe are on a clear path toward becoming a Generator Technician Level 3. GenServe supports advancement through paid training, OEM certifications, and OJT.
Power Generator Technician - $10K SIGN ON BONUS GenServe Inc. (Inactive)Power Generator Technician - $10K SIGN ON BONUSPlainview, NYEstablished in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and a growing presence across the U.S. Through a combination of organic growth and strategic acquisitions, GenServe is rapidly expanding its national footprint as a one-stop shop for generator solutions. Opportunities for Growth: Generator Technicians at GenServe are on a clear path toward becoming a Generator Technician Level 3. GenServe supports advancement through paid training, OEM certifications, and OJT.
Specialty Surgical Credentialed Veterinary Technician - Upper Manhattan - 62nd Street Bond Veterinary IncSpecialty Surgical Credentialed Veterinary Technician - Upper Manhattan - 62nd StreetNY$37–$44 / hourYou'll collaborate with veterinarians and nurses across the region, participate in monthly educational events, and use innovative technology - including AI-assisted tools and the Apple Vision Pro - that reduce administrative burden and enhance patient care. We balance this design with a strong focus on technology, all built in-house, which means we can easily innovate our systems to improve the veterinary team, pet, and client experience.
Veterinary Technician PetVet Care CentersVeterinary TechnicianMiddlesex, NJResponsibilities include providing patient care by determining animal requirements, conducting examinations and diagnostic procedures, assisting during surgery and operations, providing nursing care, assisting with feeding and caring for patients, maintaining medical supplies and equipment, overseeing triage and discharging patients, and maintaining patient medical records. Support patient examinations and operations by assembling required supplies and instruments, securing and bringing patients to examination rooms, and restraining patients; aids as directed by the veterinarian.