FMS System Engineer CMC Electronics IncFMS System EngineerChicago, ILAs a FMS Systems Engineer, you will work within the navigation systems design group and be responsible for conducting and/or directing systems engineering activities related to the design and development of Flight Management Systems. • Interface with other system designers, team members, and contractors, and customer representatives to assess the impact of proposed concepts and recommend solutions to meet cost, schedule, and performance requirements.
Staff Engineer Embedded Software Northrop Grumman CorpStaff Engineer Embedded SoftwareRolling Meadows, IL$169,000–$253,600 / yearCollaborate with the Integrated Product Team (IPT) to coordinate cross-functional test software development from requirements capture through final validation and release, and driving collaboration among product design engineers, test hardware engineers, quality assurance engineers, and manufacturing technicians. What you will get to do: Lead software architecture strategy, cost account management, and project planning for Manufacturing Engineering acceptance test software supporting multiple Line Replaceable Units (LRUs) and system-level testing for a new product introduction in Manufacturing.
Construction Engineer I (Temp-to-Hire) SOLV Energy LLCConstruction Engineer I (Temp-to-Hire)IL$29.78–$37.23 / hourThis role contributes to (1) Warranty Analysis, by gathering data and supporting engineering review of potential design or installation issues; (2) Emerging Technologies Implementation, by assisting with GPS-enabled pile driving, drone-based survey workflows, and new construction tools; (3) Construction Engineering Support During Operations, by coordinating RFIs, design updates, and field engineering clarifications; and (4) Pile Load Testing Support During Initial Design, by assisting with planning, scheduling, documentation, and engineering communication for pre-construction pile testing programs. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting.
Quality Engineer Bastion TechnologiesQuality EngineerRockford, IL$105,000–$140,000 / yearFull timeThe Quality Engineer will support work associated with the Marshall Space Flight Center (MSFC) SMASS II contract located at MSFC, via a Resident Management Office designated Critical Supplier, located in Rockford, IL 61108. Provide support on all quality areas to include quality plans, surveillance plans, inspection instructions, first article inspections, and NC resolutions, test, failure investigations, RCCA analysis and other QE related functions.
Aerospace Supplier Quality Engineer (FAI REVIEWER) TRIGO ADR AmericasAerospace Supplier Quality Engineer (FAI REVIEWER)Aurora, ILFull timeTrigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred.
NewQuality Engineer II Regal Rexnord CorpQuality Engineer IIDowners Grove, IL$80,000–$105,000 / yearThe Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. A high proficiency with Production Part Approval Process (PPAP) and Advanced Product Quality Planning (APQP) tools (including SPC, GR&R, DOE, FMEA, Control Plans, Cpk, GD&T, DMAIC, and First Article Inspection).
NewFPGA Engineer Intern (Summer 2027 - Chicago) Optiver Holding BVFPGA Engineer Intern (Summer 2027 - Chicago)Chicago, ILYou'll experience what it's like to be a full-time engineer at a leading trading firm - working on projects that blend cutting-edge FPGA technology with real-world trading strategies, directly contributing to the efficiency and performance of our trading systems. Motivated by a passion for continuous improvement, you'll thrive in a supportive, high-performing environment alongside talented colleagues, collectively tackling some of the toughest challenges in the financial markets.
Software Engineer Intern (Summer 2027 - Chicago) Optiver Holding BVSoftware Engineer Intern (Summer 2027 - Chicago)Chicago, ILMotivated by a passion for continuous improvement, you'll thrive in a supportive, high-performing environment alongside talented colleagues, collectively tackling some of the toughest challenges in the financial markets. If you have completed an online assessment or interviewed for a technology graduate or internship role at any Optiver location in the past 8 months, please note that you are not yet eligible to reapply.
Construction Project Engineer (Construction Management Focus) International Contractors IncConstruction Project Engineer (Construction Management Focus)Oakbrook Terrace, ILPhysical Requirements: Position requires walking on rough/uneven terrain, frequent pushing/pulling/carrying of equipment/objects/debris of varying and often awkward sizes, shapes, and weights, including bending, lifting, pushing, pulling, and climbing on the job site. Continually voted one of Chicago's 101 Best & Brightest Companies to Work For, this family-owned business is dedicated to work-life balance and committed to employee enrichment.
NewField Service Engineer - Automation Industry ProAutomated Inc.Field Service Engineer - Automation IndustryElk Grove Village, ILFull timeYou’ll experience new cities, tackle unique projects, and earn all your own travel rewards while working directly with customers across North America. If you’re the kind of person who can laugh through flight delays, figure things out on the fly, and find satisfaction in solving complex problems, this might be your perfect fit.
Software Engineer (Collins) The Kemtah Group, Inc.Software Engineer (Collins)Rockford, IL$83,200–$104,000 / yearJob Duties: Responsibilities may include, but are not limited to: Integration of product embedded code into the simulator architecture Integration of the simulator into a hardware-in-the-loop test environment Support, maintenance, or enhancement of tools used with the simulation such as the drawing editor or scripting engine extensions Investigation and remediation of performance issues with the simulator Troubleshoot and correct functional issues (e.g ''crash'', failure to build, incorrect output) Collaborate with team to develop estimates and support project planning Support Qualification of simulator components for formal product verification Documentation creation/update Address ''ad hoc'' questions from simulator users to determine if remediation effort is required Required Qualifications: Degree in relevant field such as Software Engineering, Computer Engineering, Computer Science, Electrical Engineering, or Mathematics; strong preference for Software Engineering. Minimum Qualifications: 5+ years of relevant experience Must have C coding experience with some knowledge of C++ Due to the nature of the work performed, US Citizenship is a requirement Preferred Qualifications & Skills: Experience with developing applications under the UNIX/Linux operating system family (Windows experience is also acceptable) Embedded flight software build knowledge: comfortable with tools such as make.
Patent Engineer - Biomedical Hanley, Flight & ZimmermanPatent Engineer - BiomedicalChicago, IllinoisWe work with clients within the automotive and aerospace sectors, telecommunications and software industries, with artificial intelligence and wireless technologies, the oil and gas industry and consumer products, as well as, valve technologies and biomedical devices and instrumentation - to name a few. Our Patent Engineer position is an exciting blend of both the legal and engineering career paths, allowing you to experience the latest in cutting- edge technology as you help inventors establish their intellectual property rights for their new inventions.
Patent Engineer Computer -Electrical Hanley, Flight & ZimmermanPatent Engineer Computer -ElectricalChicago, IllinoisWe work with clients within the automotive and aerospace sectors, telecommunications and software industries, with artificial intelligence and wireless technologies, the oil and gas industry and consumer products, as well as, biomedical devices and instrumentation and valve technologies - to name a few. Our Patent Engineer position is an exciting blend of both the legal and engineering career paths, allowing you to experience the latest in cutting- edge technology as you help inventors establish their intellectual property rights for their new inventions.
Patent Engineer Mechanical Hanley, Flight & ZimmermanPatent Engineer MechanicalChicago, IllinoisWe work with clients within the automotive and aerospace sectors, telecommunications and software industries, with artificial intelligence and wireless technologies, the oil and gas industry and consumer products, as well as, valve technologies and biomedical devices and instrumentation - to name a few. Our Patent Engineer position is an exciting blend of both the legal and engineering career paths, allowing you to experience the latest in cutting- edge technology as you help inventors establish their intellectual property rights for their new inventions.
Engineer Embedded Software Northrop Grumman CorpEngineer Embedded SoftwareRolling Meadows, IL$87,600–$131,400 / yearCollaborate with the Integrated Product Team (IPT) to coordinate cross-functional test software development from requirements capture through final validation and release, and driving collaboration among product design engineers, test hardware engineers, quality assurance engineers, and manufacturing technicians. Basic Qualifications for the Embedded Software Engineer (Advanced EO): Bachelor's degree in Computer Science, Electrical and/or Computer Engineering or related STEM degree with a minimum of 2 years of relevant work experience; OR a Master's degree in equivalent fields with 0 or more years of relevant work experience.
Staff Chief Engineer Northrop Grumman CorpStaff Chief EngineerRolling Meadows, IL$169,000–$253,600 / yearBasic Qualifications for Staff Chief Engineer: BS degree in Mechanical, Electrical Engineering, Physics or other STEM field with 12+ years of related experience, MS degree in STEM field with 10+ years of related experience, or PhD in STEM field with 8+ years of related experience. Our products range from advanced sensing technologies to state-of-the-art targeting and tracking systems that are deployed in Electro-Optical Infrared (EOIR) and Radio Frequency Electronic Warfare (RFEW) systems.
Principal/Sr. Principal Systems Design Engineer Northrop Grumman CorpPrincipal/Sr. Principal Systems Design EngineerRolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for Sr Principal Systems Design Engineer: BS degree in Mechanical, Electrical Engineering, Physics or a STEM field with 8 years of related experience; OR MS degree in STEM field with 6 years of related experience; OR PhD in STEM field with 4 years of related experience. Basic Qualifications for Principal Systems Design Engineer: BS degree in Mechanical, Electrical Engineering, Physics or a STEM field with 5 years of related experience; OR MS degree in STEM field with 3 years of related experience; OR PhD in STEM field with 1 year of related experience.
Principal/Sr. Principal Systems Security Engineer Northrop Grumman CorpPrincipal/Sr. Principal Systems Security EngineerRolling Meadows, IL$108,800–$163,200 / yearImplement and ensure compliance with US Government policies (e.g., JSIG, DAAPM, NIST 800-53, CNSSI 1253, DODI 5200.39, etc.); e.g., by supporting secure architecting of systems, reviewing processes, tailoring needs controls, and approving generating documented procedures artifacts, and overseeing security testing and analysis. Basic Qualifications for Principal Systems Security Engineer: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) field with 5 years of related experience; OR a Master's degree in a STEM field with 3 years of related experience; OR a PhD in a STEM field with 1 year of related experience.
Principal Manufacturing Test Engineer (RF Systems) Northrop Grumman CorpPrincipal Manufacturing Test Engineer (RF Systems)Rolling Meadows, IL$108,800–$163,200 / yearNorthrop Grumman Mission Systems sector is looking for a Principal Engineer, Electronics (HW + SW) - Manufacturing Test Engineering (RF Systems) located on-site in Rolling Meadows, IL, with proven embedded software knowledge alongside hardware design and/or troubleshooting experience. Basic Qualifications for the Manufacturing Test Engineer (RF Systems): Bachelor's degree in Electrical or Computer Engineering or a related STEM field with a minimum of 5 years relevant work experience; Prior experience in design of test equipment or test fixture or prime (self-off) hardware.
Principal/Sr. Principal Software Engineer Northrop Grumman CorpPrincipal/Sr. Principal Software EngineerRolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for Principal Software Engineer: Bachelor's degree in Computer Science, Computer Engineering, or similar engineering discipline with a minimum of 5+ years of engineering experience, or Master's degree in Computer Science, Computer Engineering or similar engineering discipline with a minimum of 3+ years of engineering experience or in lieu of degree, an additional 4 years of experience is required. Principal Embedded Software Engineer: Bachelor's degree in Computer Science, Computer Engineering, or similar engineering discipline with a minimum of 8+ years of engineering experience, or 6+ years with a Master's degree in Computer Science, Computer Engineering or similar engineering discipline or in lieu of degree, an additional 4 years of experience is required.
Systems Design Engineer Northrop Grumman CorpSystems Design EngineerRolling Meadows, IL$87,600–$131,400 / yearBasic Qualifications for Systems Design Engineer: BS degree in Mechanical, Electrical Engineering, Physics or a STEM field with 2 years of related experience; OR MS degree in STEM field or PhD in STEM with 0 years of related experience. Our products range from advanced sensing technologies to state-of-the-art targeting and tracking systems that are deployed in Electro-Optical Infrared (EOIR) and Radio Frequency Electronic Warfare (RFEW) systems.
Principal/Sr. Principal Systems Engineer (Integration & Test) Northrop Grumman CorpPrincipal/Sr. Principal Systems Engineer (Integration & Test)Rolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for Principal Systems Engineer (Integration & Test): BS degree in Electrical Engineering, Mechanical Engineering, or Related technical degree with 5+ years of related experience; OR MS degree in Electrical Engineering, Mechanical Engineering, or Related technical field with 3+ years related experience; OR, PhD in Electrical Engineering, Mechanical Engineering, or Related technical field with 1+ year of related experience. Principal Systems Engineer (Integration & Test): BS degree in Electrical Engineering, Mechanical Engineering, or Related technical degree with 8+ years of related experience; OR MS degree in Electrical Engineering, Mechanical Engineering, or Related technical field with 6+ years related experience; OR, PhD in Electrical Engineering, Mechanical Engineering, or Related technical field with 4+ year of related experience.
Principal Engineer Process Northrop Grumman CorpPrincipal Engineer ProcessRolling Meadows, IL$98,900–$148,300 / yearBasic Qualifications for the Manufacturing Process Engineer (RF Systems): Bachelor of Science (BS) degree in Mechanical, Aerospace, Chemical, Electrical Engineering or related STEM field with a minimum of 5 years relevant experience; OR a Master of Science (MS) degree in equivalent fields and minimum 3 years of relevant experience. Project management: Leading and reporting day-to-day process engineering efforts, providing executive level presentation on current state of a project or on a plan to resolve a production level issue, performing earned value on non-recurring activities.
NewPrincipal/Sr. Principal Power Supply Engineer Northrop Grumman CorpPrincipal/Sr. Principal Power Supply EngineerRolling Meadows, IL$108,800–$163,200 / yearPrincipal Level: Basic Qualifications for Principal Power Engineer: Bachelor's degree in electrical engineering, Computer Engineering, or similar engineering discipline with a minimum 5 years of power electronics design experience or 3 years of power electronics design experience with a master's degree in electrical engineering, Computer Engineering, or similar engineering discipline. Principal Power Engineer: Bachelor's degree in electrical engineering, Computer Engineering, or similar engineering discipline with a minimum of 8 years of power electronics design experience or 6 years of power electronics design experience with a master's degree in electrical engineering, Computer Engineering or similar engineering discipline.
Principal FPGA/Sr. Principal FPGA Design Engineer Northrop Grumman CorpPrincipal FPGA/Sr. Principal FPGA Design EngineerRolling Meadows, IL$119,600–$179,400 / yearBasic Qualifications for a Principal FPGA Design Engineer: Bachelors' degree in Electrical Engineering, Computer Engineering or similar engineering discipline with a minimum 5 years of digital electronics design experience or 3 years of digital electronics design experience with a Master's degree in a technical field or in lieu of degree, an additional 4 years of experience is required. By joining us, you'll work on projects that help safeguard our nation related to land forces, rotary wing survivability systems, international and U.S. military electronic warfare systems, communications systems, missile warning systems and sensors, infrared counter-measure systems (IRCM), automatic test equipment, modeling and simulation, and situational awareness programs.
Sr. Principal Manufacturing Test Engineer (RF Systems) Northrop Grumman CorpSr. Principal Manufacturing Test Engineer (RF Systems)Rolling Meadows, IL$135,800–$203,600 / yearWhat you will get to do: Support to Production: Coordinate with Design Engineering, Production technician, Project Management, Manufacturing Engineering, Industrial Engineering, and Quality organizations to test and provide solutions to support nonconformance systems for contractual acceptance testing and environmental screening commitments. Principal Manufacturing Test Engineer (RF Systems): Bachelor of Science degree in Electrical and/or Computer Engineering or a related STEM field with a minimum of 8 years relevant experience; OR a Master of Science (MS) degree in equivalent fields with 6 or more years of experience.
Manufacturing Test Engineer (RF Systems) Northrop Grumman CorpManufacturing Test Engineer (RF Systems)Rolling Meadows, IL$87,600–$131,400 / yearWhat you will get to do: Support to Production: Coordinate with Design Engineering, Production technician, Project Management, Manufacturing Engineering, Industrial Engineering, and Quality organizations to test and provide solutions to support nonconformance systems for contractual acceptance testing and environmental screening commitments. Basic Qualifications for the Manufacturing Test Engineer (RF Systems): Bachelor of Science degree in Electrical and/or Computer Engineering or a related STEM field with a minimum of 2 years relevant experience; OR a Master of Science (MS) degree in equivalent fields with 0 or more years of experience.
Engineer Electronics Northrop Grumman CorpEngineer ElectronicsRolling Meadows, IL$87,600–$131,400 / yearSupport to Production: Coordinate with Design Engineering, Production technician, Project Management, Manufacturing Engineering, Industrial Engineering, and Quality organizations to test EOIR products and provide solutions to support nonconformance repair procedures. Project management: Leading and reporting day-to-day test engineering efforts, providing executive level presentation on current state of a project or on a plan to resolve a production level issue, performing earned value on non-recurring activities.
Sr Principal Engineer Embedded Software Northrop Grumman CorpSr Principal Engineer Embedded SoftwareRolling Meadows, IL$135,800–$203,600 / yearCollaborate with the Integrated Product Team (IPT) to coordinate cross-functional test software development from requirements capture through final validation and release, and driving collaboration among product design engineers, test hardware engineers, quality assurance engineers, and manufacturing technicians. Principal Embedded Software Engineer (Advanced EO): Bachelor of Science (BS) degree in Computer Science, Electrical and/or Computer Engineering or related STEM degree with a minimum of 8 years relevant work experience; OR a Master of Science (MS) degree in equivalent fields with a minimum of 6 years' relevant work experience.
Sr. Principal PWB Design Engineer Northrop Grumman CorpSr. Principal PWB Design EngineerIL$111,700–$185,000 / yearPrincipal Design Engineer: Bachelor's degree in STEM field with 8 years of directly related professional working experience or Master's degree in STEM field with 6 years of directly related professional working experience or 12 years of directly related professional working experience in lieu of degree. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Principal Embedded Software Engineer Northrop Grumman CorpPrincipal Embedded Software EngineerRolling Meadows, IL$108,800–$163,200 / yearCoordinate with Electrical Design Engineering, Software & Firmware Engineering, Production technician, Project Management, Manufacturing Engineering, Industrial Engineering, and Quality organizations to meet contractual acceptance testing and environmental screening commitments. Basic Qualifications for the Principal Manufacturing Test Engineer (RF Systems): Bachelor of Science degree in Electrical and/or Computer Engineering or a related STEM field with a minimum of 5 years relevant experience; OR a Master of Science (MS) degree in equivalent fields with 3 or more years of experience.
Principal/Sr. Principal FPGA Design Engineer Northrop Grumman CorpPrincipal/Sr. Principal FPGA Design EngineerRolling Meadows, IL$119,600–$179,400 / yearBasic Qualifications for a Principal FPGA Design Engineer: Bachelors' degree in Electrical Engineering, Computer Engineering or similar engineering discipline with a minimum 5 years of digital electronics design experience or 3 years of digital electronics design experience with a Master's degree in a technical field or in lieu of degree, an additional 4 years of experience is required. By joining us, you'll work on projects that help safeguard our nation related to land forces, rotary wing survivability systems, international and U.S. military electronic warfare systems, communications systems, missile warning systems and sensors, infrared counter-measure systems (IRCM), automatic test equipment, modeling and simulation, and situational awareness programs.
Principal/Sr. Principal Systems Engineer Northrop Grumman CorpPrincipal/Sr. Principal Systems EngineerRolling Meadows, IL$108,800–$163,200 / yearResponsibilities may include development of simulation code and scripts, design of system models, documentation of model assumptions and performance, test automation, test reports, and execution of integration test activities in virtual environments and/or System Integration Labs (SILs) or offsite locations. Basic Qualifications for Principal Systems Engineer: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) field with 5 years of related experience; OR a Master's degree in a STEM field with 3 years of related experience; OR PhD in a STEM field with 1 years of related experience.
On call Staff Software Engineer Northrop Grumman CorpOn call Staff Software EngineerRolling Meadows, IL$169,000–$253,600 / yearBasic Qualifications for Staff Embedded Software Engineer: Bachelor's degree in Computer Science, Computer Engineering, or similar engineering discipline with a minimum of 12+ years of engineering experience, or Master's degree in Computer Science, Computer Engineering or similar engineering discipline with 10+ years of engineering experience. The Embedded Software Engineer designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements.
Principal/Sr. Principal Modeling & Simulation Systems Engineer Northrop Grumman CorpPrincipal/Sr. Principal Modeling & Simulation Systems EngineerRolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for Principal Modeling & Simulation Systems Engineer: BS degree in Mechanical, Electrical Engineering, Physics, or a STEM field with 5+ years of related experience, MS degree in STEM field with 3+ years of related experience, or PhD in STEM field with 1+ years of related experience. Principal Modeling & Simulation Systems Engineer: BS degree in Mechanical, Electrical Engineering, Physics, or a STEM field with 8+ years of related experience, MS degree in STEM field with 6+ years of related experience, or PhD in STEM field with 4+ years of related experience.
Staff Software Embedded Engineer Northrop Grumman CorpStaff Software Embedded EngineerRolling Meadows, IL$169,000–$253,600 / yearBasic Qualifications for Staff Embedded Software Engineer: Bachelor's degree in Computer Science, Computer Engineering, or similar engineering discipline with a minimum of 12+ years of engineering experience, or Master's degree in Computer Science, Computer Engineering or similar engineering discipline with 10+ years of engineering experience or in lieu of degree, an additional 4 years of experience is required. The Embedded Software Engineer designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements.
Principal/Sr. Principal Digital Design Engineer Northrop Grumman CorpPrincipal/Sr. Principal Digital Design EngineerRolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for a Principal Digital Design Engineer: Bachelors' degree in Electrical Engineering, Computer Engineering or similar engineering discipline with a minimum 5 years of digital electronics design experience or a Master's degree in Electrical Engineering, Computer Engineering or similar engineering discipline and 3 years of digital electronics design experience. By joining us, you'll work on projects that help safeguard our nation related to land forces, rotary wing survivability systems, international and U.S. military electronic warfare systems, communications systems, missile warning systems and sensors, infrared counter-measure systems (IRCM), automatic test equipment, modeling and simulation, and situational awareness programs.
Sr. Staff Chief Engineer Northrop Grumman CorpSr. Staff Chief EngineerRolling Meadows, IL$184,100–$276,100 / yearStaff Chief Engineer: BS degree in Mechanical, Electrical Engineering, Physics or other STEM field with 14+ years of related experience, MS degree in STEM field with 12+ years of related experience, or PhD in STEM field with 10+ years of related experience. Our products range from advanced sensing technologies to state-of-the-art targeting and tracking systems that are deployed in Electro-Optical Infrared (EOIR) and Radio Frequency Electronic Warfare (RFEW) systems.
Principal Engineer Embedded Software Northrop Grumman CorpPrincipal Engineer Embedded SoftwareRolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for the Principal Manufacturing Test Engineer (RF Systems): Bachelor of Science degree in Electrical and/or Computer Engineering or a related STEM field with a minimum of 5 years relevant work experience; OR a Master of Science (MS) degree in equivalent fields with 3 or more years of relevant work experience. Coordinate with Electrical Design Engineering, Software & Firmware Engineering, Production technician, Project Management, Manufacturing Engineering, Industrial Engineering, and Quality organizations to meet contractual acceptance testing and environmental screening commitments.
Principal Engineer Electronics Northrop Grumman CorpPrincipal Engineer ElectronicsRolling Meadows, IL$108,800–$163,200 / yearThis onsite, full-time position will support engineering efforts associated with testing, maintaining, and identifying improvements / corrective actions for a variety of Electro-optical and Infrared hardware and systems, including Circuit Card Assemblies (CCAs), lasers, infrared sensors, along with an assortment of production test equipment and associated systems. Basic Qualifications for the Principal Engineer Electronics: Bachelor of Science degree in Electrical Engineering, Engineering Technology or related STEM field with a minimum of 5 years of relevant work experience; OR a Master's degree in Electrical Engineering or related engineering discipline within a minimum of 3 years of relevant experience.
Hardware Engineer - Manufacturing Test Engineering (RF Systems) Northrop Grumman CorpHardware Engineer - Manufacturing Test Engineering (RF Systems)Rolling Meadows, IL$108,800–$163,200 / yearCoordinate with Electrical Design Engineering, Software & Firmware Engineering, Production technician, Project Management, Manufacturing Engineering, Industrial Engineering, and Quality organizations to meet contractual acceptance testing and environmental screening commitments. Basic Qualifications for the Manufacturing Test Engineer (RF Systems): Bachelor of Science degree in Electrical and/or Computer Engineering or a related STEM field with a minimum of 5 years relevant experience; OR a Master of Science (MS) degree in equivalent fields with 3 or more years of experience.
Principal Software Embedded Engineer Northrop Grumman CorpPrincipal Software Embedded EngineerRolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for Principal Embedded Software Engineer: Bachelor's degree in Computer Science, Computer Engineering, or similar engineering discipline with a minimum of 5+ years of engineering experience, or Master's degree in Computer Science, Computer Engineering or similar engineering discipline with a minimum of 3+ years of engineering experience or in lieu of degree, an additional 4 years of experience is required. The Embedded Software Engineer designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements.
Embedded Software Engineer Northrop Grumman CorpEmbedded Software EngineerRolling Meadows, IL$87,600–$131,400 / yearBasic Qualifications for Embedded Software Engineer: Bachelor's degree in Computer Science, Computer Engineering, or similar engineering discipline with a minimum of 2+ years of engineering experience, or Master's degree in Computer Science, Computer Engineering or similar engineering discipline or in lieu of degree, an additional 4 years of experience is required. The Embedded Software Engineer designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements.
Sr. Principal Embedded Software Engineer Northrop Grumman CorpSr. Principal Embedded Software EngineerRolling Meadows, IL$135,800–$203,600 / yearPrincipal Embedded Software Engineer: Bachelor's degree in Computer Science, Computer Engineering, or similar engineering discipline with a minimum of 8+ years of engineering experience, or Master's degree in Computer Science, Computer Engineering or similar engineering discipline with 6+ years of engineering experience or in lieu of degree, an additional 4 years of experience is required. The Embedded Software Engineer designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements.
DevOps/Principal DevOps Engineer Northrop Grumman CorpDevOps/Principal DevOps EngineerRolling Meadows, IL$87,600–$131,400 / yearBasic Qualifications for Principal DevOps Engineer: Bachelor's Degree in a Science, Technology, Engineering, or Mathematics (STEM) field and 5+ years of experience; 3+ years of experience with Master's Degree; OR in lieu of a degree, an additional 4 years of experience is required. Basic Qualifications for DevOps Engineer: Bachelor's Degree in a Science, Technology, Engineering, or Mathematics (STEM) field and 2+ years of experience; or a master's degree OR in lieu of a degree, an additional 4 years of experience is required.
Principal Engineer Electronics - Manufacturing Engineering (RF) Northrop Grumman CorpPrincipal Engineer Electronics - Manufacturing Engineering (RF)Rolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for the Principal Engineer Electronics (RF): Bachelor's degree in Electrical Engineering, Engineering Technology or related STEM field with a minimum of 5 years of relevant work experience; OR a Master's degree in equivalent fields and minimum of 3 years of relevant work experience. Support to Production: Coordinate with Design Engineering, Production technician, Project Management, Manufacturing Engineering, Industrial Engineering, and Quality organizations to test EOIR products and provide solutions to support nonconformance repair procedures.
Principal Digital/Sr. Principal Digital Design Engineer Northrop Grumman CorpPrincipal Digital/Sr. Principal Digital Design EngineerRolling Meadows, IL$108,800–$163,200 / yearBasic Qualifications for a Principal Digital Design Engineer: Bachelors' degree in Electrical Engineering, Computer Engineering or similar engineering discipline with a minimum 5 years of digital electronics design experience or a Master's degree in Electrical Engineering, Computer Engineering or similar engineering discipline and 3 years of digital electronics design experience. By joining us, you'll work on projects that help safeguard our nation related to land forces, rotary wing survivability systems, international and U.S. military electronic warfare systems, communications systems, missile warning systems and sensors, infrared counter-measure systems (IRCM), automatic test equipment, modeling and simulation, and situational awareness programs.
Power Electronics Engineer Level 3/4 - Rolling Meadows Northrop Grumman CorpPower Electronics Engineer Level 3/4 - Rolling MeadowsRolling Meadows, IL$108,800–$163,200 / yearPrincipal Power Design Engineer will design and develop power conversion architectures using the latest technologies from Linear Technology, Texas Instruments, and other integrated circuit device manufacturers. You will become part of Northrop Grumman's Electrical Design & Technology group, working with other engineers to develop state-of-the-art power supplies and power products for space applications.
NewPrincipal/Sr. Principal PWB Design Engineer Northrop Grumman CorpPrincipal/Sr. Principal PWB Design EngineerRolling Meadows, IL$98,900–$148,300 / yearBasic Qualifications for Principal PWB Design Engineer: Bachelor's degree in STEM field with 5 years of directly related professional working experience or Master's degree in STEM field with 3 years of directly related professional working experience or 9 years of directly related professional working experience in lieu of degree. Principal PWB Design Engineer: Bachelor's degree in STEM field with 8 years of directly related professional working experience or Master's degree in STEM field with 6 years of directly related professional working experience or 12 years of directly related professional working experience in lieu of degree.
Sr. Design Engineer - Electro-Mechanical Actuation Regal Rexnord CorpSr. Design Engineer - Electro-Mechanical ActuationDowners Grove, ILThe Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Salary is dependent on a multitude of factors, including but not limited to the physical worksite location, the geographic market of that location, candidate's skill set, level of experience, education and internal peer compensation comparisons among other potential factors.