2,812 Results for

Equipment Engineer Jobs in Wilmington, MA

Jobs

Nashua, NH

Contractor

Recommends and implements improvements to production processes, cycle times, methods and controls. Oversees automated equipment installation, maintenance and upkeep.

14 days ago

Hudson, New Hampshire

Contractor

You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.

16 days ago

Cambridge, ON

Working closely with cross-functional teams including Engineering, Production, Quality, Supply Chain and Operations, you will lead process improvement initiatives, support engineering change implementation and contribute to the successful execution of strategic manufacturing projects. As a Manufacturing Engineering Specialist at Shred-Tech, you will play a key role in optimizing manufacturing operations, supporting new product introductions, and driving continuous improvement initiatives across the organization.

1 day ago

Hudson, NH

$31–$49

p> Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to:

the individual’s skill sets, experience and training;
licensure and certification requirements;
office location and other geographic considerations;
other business and organizational needs. Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs.

7 days ago

Haverhill, MA

$90,000–$100,000 / year

Additionally, the Cyclotron-Support Engineer I is responsibility for first-line troubleshooting, maintenance, and repair of equipment associated with manufacturing, including manipulator arms, lead shielded hot cells, radiosynthesizers, etc. Perform diagnosis and repair on the following: Electronic equipment, electro-pneumatic systems, high vacuum systems, deionized chilled water systems, high voltage, target, and high-power RF systems.

9 days ago

Seabrook, NH

$100,000–$120,000 / year
Full time

This role is partnering closely with engineering, production, and machine shop teams to improve processes, implement new equipment, and support continuous improvement initiatives. The CNC Manufacturing Engineer is driving the development, optimization, and validation of manufacturing processes in a low-volume, high-configuration environment to ensure products are built safely, efficiently, and to specification.

16 days ago

Cambridge, MA

$140,000–$165,000 / year

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

1 day ago

Exeter, NH

Full time

p>The Test Engineer is responsible for the design, development, programming, implementation, and maintenance of automated test equipment and test fixtures used in the testing of power supplies and related electronic products. This role works closely with design and manufacturing teams to develop test procedures, create automated test programs, and ensure product quality through effective testing processes.

20 days ago

Exeter, NH

Full time

p class="MsoNormal">•Work will be performed using oscilloscopes, voltage meters, electronic loads, bench top power supplies, varies, test fixtures, environmental ovens and other electronic associated equipment.

•Testing product models whether actual or prototype (bead board) to environmental conditions in order to establish operational stability, reliability and conformity to design.

30+ days ago

Nashua, NH

Building on over four decades of leadership and experience, Wakefield Thermal designs, manufactures, and sells thermal management products that remove excess heat generated by electronic components. Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.

30+ days ago

Braintree, MA

$35–$40 / hour
Contractor

p tabindex="0">Akshar Staffing is hiring for Supplier Quality Engineer with medical device, candidate need to on W2 only. NO C2C is allowed.

1 day ago

Waltham, MA

As a successful candidate, you will have passion making a positive impact and assisting in a new product to improve climate change for future generations.

Vastly Growing Start Up in Boston Area seeking a Mechanical Engineer for their team.

7 days ago

Hudson, New Hampshire

Contractor

Collaboration: Collaborate with cross-functional teams, including electrical engineers, mechanical engineers, software engineers, and project managers, to ensure successful integration of the Antennas . *Testing and Measurement Equipment: - Experience with Antenna/RF testing and measurement equipment, such as network analyzers, spectrum analyzers, signal generators, and oscilloscopes.

8 days ago

Exeter, NH

Full time

Testing will include subjecting product model with either actual or prototype breadboard to environmental conditions to establish operational stability, reliability and conformity to design. • Responsible for generating preliminary documentation for fabrication of prototype models which may include fabricating, testing, troubleshooting and repairing analog and digital/analog circuits.

30+ days ago

Marlborough, MA

$65–$70 / hour
Temporary

Process development â Create process flow diagrams, mass and energy balances, and support HAZOP and FMEA risk assessments. The position requires strong communication skills, technical depth, and the ability to collaborate across teams.

6 days ago

Walpole, MA

p>Follow and contribute to the company’s proprietary Master Model Concept, working within structured stage models and manufacturing method assemblies to maintain disciplined, repeatable programming practices across all hydrodynamic production programs.

Education & Experience (one of the following):

Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Engineering Technology or related discipline — internship/co-op experience strongly valued.

1 day ago

Burlington, MA

$40–$45 / hour
Contractor

p>Our Heart Failure R&D team is seeking a Senior Mechanical Engineer to provide technical leadership and hands-on expertise in the development of Mechanical Circulatory Support devices, specifically Left Ventricular Assist Devices (LVAD).

You will work cross-functionally to design, analyze, prototype, and test implantable Class III devices, contributing to the full product lifecycle from concept through commercialization.

6 days ago

Devens, MA

$52.14–$55.30 / hour

li>Design, execute, manage, and implement QC instrument / software qualification documents such as (but not limited to): User Requirement Specification (URS), Design Qualification (DQ), validation plans, equipment IOQ protocols, software test scripts, configuration specifications, risk assessments, qualification summary reports.

Quality management system experience including: document control / management, change controls, investigations, deviations, electronic validation databases, asset management database.

7 days ago

Cambridge, Massachusetts

Contractor

Excellent development and troubleshooting skills on embedded targets ¿ Excellent knowledge of OS coding techniques, interfaces, hardware subsystems and driver development ¿ Development experience with device drivers, board support package, boot code and knowledge of embedded system buses and protocols (e.g. GCC, LLVM), static analysis tools, dynamic analysis, and QEMU based development are preferred ¿ Knowledge and experience with software configuration management tools, defect tracking tools, and peer review processes.

30+ days ago

Cambridge, Massachusetts

Contractor

Client is seeking a software engineer with an B.S. or a M.S. in Aerospace Engineering, Electrical Engineering, Systems Engineering, Computer Science or equivalent. Integration and test will include everything from unit testing, static and dynamic testing, integration and interface testing, debugging, and defect resolution.

30+ days ago

Woburn, MA

li>Works in an active manufacturing environment subject to noise, vibration, metal chips, cutting fluids, and industrial equipment; required to wear personal protective equipment (PPE) at all times on the shop floor, including safety glasses, hearing protection, and steel-toed footwear.

You are recognized for delivering transformational work with flawless reliability on the most visible and high-stakes organizational commitments, operating with a high degree of autonomy and self-direction to meet demanding deadlines without sacrificing quality.

1 day ago

Maynard, MA

$57–$67 / hour
Contractor

Maintain and update the Integrated Master Schedule (IMS) for Advanced Test Equipment (ATE) programs; ensuring alignment with milestones and resource plans. * Identifying and driving continuous process improvement initiatives that boost project execution, efficiency, and improve documentation quality.

16 days ago

Wilmington, MA

$135,000–$250,500 / year

Please click here for the E-Verify Poster in English or Spanish.

Bachelor’s degree in Computer Engineering, Computer Science, or related field with 9+ years of relevant experience; OR Graduate Degree with 7+ years of relevant experience; OR 13+ years of relevant experience in lieu of a degree.

2 days ago

Wilmington, MA

$97,000–$180,000 / year

Please click here for the E-Verify Poster in English or Spanish.

Bachelor’s degree in Computer Engineering, Computer Science, or related field with 4+ years of relevant experience; OR Graduate Degree with 2+ years of relevant experience; OR 8+ years of relevant experience in lieu of a degree.

2 days ago

Hudson, MA

$100,000–$130,000 / year
Full time

This Operations Manager leads daily operations across production, procurement, and logistics within a fabrication and equipment manufacturing environment. With consistent double-digit growth, it has built a strong reputation for delivering engineered solutions to leading global clients.

9 days ago

Norwood, MA

$98,000–$141,000

li>

Must possess a strong understanding of asset integrity principles in complex process environments, including the reliability and integrity of critical equipment such as steam and gas turbines, electrical generators, rotating equipment, boilers, and piping systems, along with electrical systems, and how these systems, including their associated control and protection elements, interact and impact one another. Critical to the role is the ability to influence key stakeholders so they become more resilient against hazards and exposures, ultimately developing into a trusted advisor through sustainable risk improvement, strong communication skills, engineering expertise, and business acumen.

16 days ago

Framingham, MA

$92,300–$166,850

April 9, 2026

For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.

29 days ago

Framingham, MA

Remote

$73,450–$132,775

April 9, 2026

29 days ago

Billerica, MA

$75–$85 / hour
Contractor

Desired Skills (Nice to Have)Experience with project leadership, project cost and schedule management, i.e. EVMS, MS ProjectDoW (DoD) project development life cycle processes. The individual comes up to speed quickly, has an impact on our projects developing test stations/fixtures/automated test software, has familiarity with a process heavy work environment.

7 days ago

Billerica, MA

$80–$95 / hour
Contractor

6 days ago

Bedford, NH

Duties include, but are not limited to, the operation, installation, repair, maintenance, and improvement of all building structures and equipment including HVAC, plumbing, electrical, and life safety.

RESPONSIBILITIES:

Perform and/or oversee the day-to-day efficient operation, maintenance and repair of all building and site systems for assigned properties.
POSITION: HVAC Building Maintenance Engineer
LOCATION: Newington/Pease/Hampton, NH
REPORTS TO: Regional Vice President and Lead Engineer
ABOUT US.

14 days ago

Woburn, MA

$90,000–$105,000 / year
Full time

The Manufacturing Process Engineer will partner closely with design engineers, scientists, technicians, and production teams to ensure new products are designed for manufacturability and successfully transitioned into production. This individual will also play a key role in continuous improvement efforts, troubleshooting production issues, and supporting day‑to‑day manufacturing operations.

23 days ago

Nashua, NH

$105,000–$125,000 / year
Full time

p>Reporting directly into the Engineering Manager, you will be responsible for:

Installing, improving, and evaluating new and existing equipment and processes.
As the Senior Plastics Engineer, you will work to improve and develop new manufacturing equipment and processes on the production floor.

2 days ago

North Reading

$22–$25 / hour
Temporary
Contractor

Responsibilities include the timely production of precision components affecting prototyping, production runs and engineering deliverables, as well as routine equipment maintenance. Basic working knowledge of fixture and workholding design (custom jigs and fixtures preferable) at a fabrication level.

19 days ago

Salem, MA

$120,000–$160,000 / year
Full time

With decades of industry leadership and a strong international footprint, they partner with leading chip manufacturers to drive innovation across industries including automotive, consumer electronics, and communications. The ideal candidate is an experienced electrical engineer with a strong background in hardware design and a proven ability to deliver projects independently.

9 days ago

Nashua, NH

$120,000–$135,000 / year
Full time

p>Reporting directly into the Engineering Manager, you will be responsible for the following:

Lead the technical development and ongoing improvement of R&D tooling across multiple manufacturing processes. The culture values collaboration, continuous improvement and practical problem‑solving, offering engineers the opportunity to work closely with manufacturing, suppliers and R&D teams in a hands‑on, technically challenging setting.

2 days ago

Bedford, MA

$110,000–$140,000 / year
Full time

A growing precision manufacturing environment is seeking a skilled Senior Process Engineer with strong CNC programming expertise to support new product introduction, optimize production processes, and drive continuous improvement across machining operations. Create, implement, and troubleshoot CNC programs for new part start ups using MasterCAM, PartMaker, or similar platforms.

23 days ago

Norwood, MA

$74,080–$106,500

a href="https://www.fmapprovals.com/Certification-Services/Marks-and-Auditing" rel="nofollow noopener noreferrer" target="_blank">Audits include various manufacturers responsible for producing products for compliance with FM Approvals requirements. Job Description:

FM Approvals is an international leader in third-party testing and certification services.

2 days ago

Watertown, MA

$100,000–$130,000 / year
Full time

A successful Spinal Implant Instruments Development Engineer should have: 3+ years of experience designing and developing spinal implants. With a small, highly skilled team, it offers a fast-paced startup environment, competitive compensation, and the opportunity to make a direct impact on healthcare.

23 days ago

Watertown, MA

$100,000–$130,000 / year
Full time

p>The Spinal Implant Instruments Development Engineer will play a key role in designing and developing innovative spinal implant instruments within the medical industry.

Design complete spinal instrument systems for procedures, including trials, inserters, distractors, reduction tools, and minimally invasive workflows.

2 days ago

Boston, MA

$80,000–$100,000 / year
Full time

With approximately 400 employees and continued expansion planned, the business is investing heavily in data centre infrastructure and large enterprise customers, creating strong long-term growth opportunities.

The client is a well-established and fast-growing manufacturer of metal components and custom-engineered parts serving OEM customers across multiple industrial sectors.

1 day ago

Boston, MA

$160,000–$200,000 / year

ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Today

Billerica, MA

$130,000–$160,000 / year
Full time

Known for tackling complex clinical challenges, the company invests heavily in R&D, values engineering rigor, and fosters a hands‑on, collaborative culture where technical excellence is recognized and rewarded. As the Senior Mechanical Engineer, Product Development, you will lead the design and development of innovative electromechanical medical products used in high impact clinical applications.

23 days ago

Tewksbury

$55–$60 / hour
Temporary
Contractor

div data-olk-copy-source="MessageBody">Title: System Test Engineer

Location: Tewksbury, MA 01876 (In office role)

Duration: 6months

Max PR: $60/hr

Job description:.
The contractor will support hands-on testing in a system test lab/integration test environment and will work with airport checkpoint screening equipment, test workstations, software applications, and related system components.

1 day ago

Newton, MA

Today

Norwood, MA

$30.88–$38.61

p/>

The Four Points by Sheraton Norwood Hotel & Conference Center features 230 modern, smoke-free guestrooms, including allergy-friendly options, along with complimentary Wi-Fi, parking, and access to the fitness center and indoor pool. With 28 meeting rooms and 40,000 square feet of event space, the hotel is well-suited for meetings and conferences of all sizes, and the Tiffany Ballroom to cater social events.

4 days ago

Canton, MA

$118,800–$132,000

Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations. As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future.

30+ days ago

Nashua, NH

$80,000–$95,000 / year
Full time

This role sits within an R&D team focused on developing and improving engineered products by translating customer needs into practical, manufacturable solutions. You will lead technical projects, create and test prototypes, and partner closely with operations, quality, and manufacturing teams to deliver robust outcomes.

23 days ago

Exeter, NH

Inspect completed work using precision measuring equipment including micrometers, calipers, height gages, thread gages, optical comparators, and surface plates to verify compliance with engineering drawings. Set up and operate various types of machining equipment including manual milling machines, engine lathes, surface grinders and CNC milling machines to hold tolerances tighter than .0005” on various types of features.

2 days ago

Cambridge, MA

The Draper team is chartered with supporting the Nation’s most challenging problems by 1) providing an iterative and agile approach to innovative and creative technical solutions delivered at the speed of mission and 2) driving leading edge technology development efforts to support future mission needs. The Tailored Systems Business Area within Electronics Program Office directorate delivers first-of-a-kind field-ready microelectronics solutions in support of National Security missions.

1 day ago

Stand out to leading employers.

Upload your resume and let employers find you for new Equipment Engineer job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Equipment Engineer Jobs in Wilmington, MA

Manufacturing Engineer KTEK RESOURCING

Manufacturing Engineer III (NH) GCR Professional Services

Manufacturing Engineer Shred-Tech Corporation

Quality Engineer Vaco LLC

Cyclotron Engineer SOFIE

CNC Manufacturing Engineer - Aerospace & Defense - Seabrook, NH Michael Page USA

Staff Power Electronics Engineer Jobot

Test Engineer Continental Resources

Design Engineer Continental Resources

Manufacturing Engineer - Thermal Solutions Wakefield Thermal Solutions, Inc.

Supplier Quality Engineer Akshar IT Solutions LLC

Mechanical Engineer Micro Tech

RF Engineer III (NH) - Security Clearance GCR Professional Services

Sr. Principal Design Engineer Continental Resources

Process Engineer III â Contract Role Kinetic Personnel Group

Manufacturing Engineer Fairbanks Morse Defense

Mechanical Engineer Sriven Systems

Validation Engineer ECLARO

Embedded Software Engineer (Avionics) GCR Professional Services

Flight Software Engineer GCR Professional Services

Senior Subtractive Manufacturing Engineer, Production Machining Rennscot MFG

Project Engineer Butler America Aerospace

Lead, IPTL Software Engineer (Optical Space Systems) : Sign-on bonus ($30K max) L3Harris Technologies

Specialist, Embedded Software Engineer (Optical Payload Integration) : Sign-on bonus ($15K max) L3Harris Technologies

Operations Manager - Equipment Manufacturing - Hudson, MA Michael Page USA

Account Engineer, Boiler & Machinery FM

Senior Civil/Structural Engineer Leidos

Civil/Structural Engineer Leidos

STS Senior Test Development Engineer P3 Butler America Aerospace

STS Senior Test Development Engineer P2 Butler America Aerospace

Building Engineer Farley White Management Company

Manufacturing Process Engineer- Electronics- Woburn, MA Michael Page USA

Senior Plastics Engineer - Nashua, NH Michael Page USA

Support Engineer I Collabera

Electrical Engineer - Industrial - Salem, MA Michael Page USA

Senior Staff Engineer, R&D Tooling - Plastics - Nashua, NH Michael Page USA

Senior Process Engineer- Machining- Bedford, MA Michael Page USA

FM Approvals Engineering Quality Auditor II FM

Product Engineer - Implant Devices - Watertown, MA Michael Page USA

Spinal Instruments Development Engineer - Watertown, MA Michael Page USA

Application/Sales Engineer - Metal Fabrication - Boston Michael Page USA

Hollowcore Engineer/Scientist Manpower Engineering

Senior Mechanical Engineer - Product Development Michael Page USA

System Test Engineer Collabera

Component Engineer 4 Manpower Engineering

Hotel Facilities Engineer Four Points by Sheraton Norwood

Engineer, Senior Constellation Energy

R&D Engineer - Project Engineering - Nashua, NH Michael Page USA

Toolroom Machinist Costello April Design Inc

Senior Mixed Signal Electronics Design Engineer Draper

Similar Job Searches