Maintenance Technician Coast Personnel ServicesMaintenance TechnicianHuntsville, AL$24.50–$25 / hourFull timeThe ideal candidate will possess strong mechanical knowledge, experience with appliance repair, HVAC/R systems, refrigeration, and construction-related tasks. Troubleshoot and repair appliances, air conditioning units, and various mechanical systems using schematics and technical manuals.
NewMaintenance Technician PitStop Car WashMaintenance TechnicianMobile, AL$25–$30All candidates considered for this position must submit a valid driver's license and successfully pass a company insurance review authorizing them to operate fleet vehicles. If you like solving problems, working with your hands, and seeing immediate results from your work, this role fits.
NewDiesel Technician/Mechanic III - Entry Level Penske Truck RentalDiesel Technician/Mechanic III - Entry LevelMOBILE, ALWillingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles.
NewField Service Technician - Level 2 Sunbelt RentalsField Service Technician - Level 2Gadsden, AL$22.85–$31.41 / hourThe following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SBRelated experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician. * Bilingual (Spanish or Other) may be required based on location needsThe physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job.
Technician 3 Sunbelt RentalsTechnician 3Theodore, AL$22.85–$31.41 / hour5 +years of Technician experience with similar diesel equipment and/or heavy equipment or specialty lines equipment (large-scale generators, pumps, HVAC or Oil & Gas equipment) strongly preferred. Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician.
NewTechnician - Level 2 Sunbelt RentalsTechnician - Level 2Birmingham, AL$21.38–$29.39 / hourThe following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SB. Related experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician.
Field Service Technician - Level 1 Sunbelt RentalsField Service Technician - Level 1Gadsden, AL$20.31–$27.92 / hourThe following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SBRelated experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician. * Bilingual (Spanish or Other) may be required based on location needsThe physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job.
NewElectrical & Instrumentation Technician DraxElectrical & Instrumentation TechnicianBoligee, ALInspect, test, adjust, calibrate, and repair electric, electronic, mechanical, and pneumatic instruments and systems used for monitoring and recording. Complete work order cycles by performing tasks, confirming time spent, and entering equipment history.
Engineering Technician IV Science Applications International CorpEngineering Technician IVHuntsville, ALOur robust portfolio of offerings across the defense, space, civilian, and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services. By providing the information below and checking the boxes referenced, you acknowledge and consent to SAIC''s Privacy Policy to include access and use of your information for the purposes of sharing your information for possible employment recruitment effects by SAIC and it''s third party vendors.
Engineering Technician II Science Applications International CorpEngineering Technician IIHuntsville, ALOur robust portfolio of offerings across the defense, space, intelligence, and civilian markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services. By providing the information below and checking the boxes referenced, you acknowledge and consent to SAIC''s Privacy Policy to include access and use of your information for the purposes of sharing your information for possible employment recruitment effects by SAIC and it''s third party vendors.
Engineering Technician 1 - 3rd Shift AstrionEngineering Technician 1 - 3rd ShiftHuntsville, AlabamaEnsure that simulated environments such as rain, salt, fog, high and low temperature, high and low humidity, altitude, etc. are properly calibrated and maintained. Communicate with engineers, technicians, and customers to discover and develop requirements, with the goal of optimizing and improving current and future processes.
Engineering Technician C (NDT) L3Harris Technologies IncEngineering Technician C (NDT)Huntsville, ALJob Description: We are seeking an Engineering Technician (NDT) Level C to support our state‑of‑the‑art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which serves as our inert manufacturing facility for the fabrication and assembly of composite rocket motor hardware. Bachelor's degree with a minimum of 4 years of prior relevant experience; or a graduate degree with a minimum of 2 years of related experience; or, in lieu of a degree, a minimum of 8 years of prior related experience.
Senior Engineering Technician Karman Holdings IncSenior Engineering TechnicianDecatur, ALHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems.
Entry-Level Construction Materials Engineering Technician S&ME, Inc.Entry-Level Construction Materials Engineering TechnicianHuntsville, ALFull timeS&ME is looking for a hard-working Entry-Level Construction Materials Engineering Technician ready for hands-on learning to join our Construction Services team in Huntsville, Alabama. As an entry-level Construction Materials Engineering Technician, you enjoy starting your day outdoors and take pride in hands-on work that impacts the projects you work on.
Electrical Engineering Technician FMS AerospaceElectrical Engineering TechnicianHuntsville, ALWill work with a team of Electrical and Design Engineers and PMs to troubleshoot, design, and implement electrical systems supporting various military and commercial customers Provide offsite & onsite assistance and installation of electrical systems Mentored by avionics and electrical engineering technicians and junior level electrical engineers within the company Occasionally be asked to travel to hangars, bases, customer sites to facilitate successful system integration of mechanical and electrical and provide assistance as needed to Project Managers at onsite locations. 2-4 years' experience in avionics and/or electrical wiring systems Minimum of a high school diploma/GED IPC-620 certification is a must Experience reading electrical drawings Experience in a production/manufacturing setting Strong interpersonal skills and the ability to work proficiently with remotely located employees as well as in a team environment Proficiency in English (written and spoken) Must be U.S. citizen Must currently possess an active Department of Defense Secret clearance.
Engineering Technician III AstrionEngineering Technician IIIHuntsville, Alabama5 years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or 2 years of applicable college/vocational/military/technical school and 3 years of applicable experience in the assigned specialty area; and the following additional requirements: Instrumentation – Experience must include successful completion of sixteen (16) weeks of civilian or military training in electronics or basic instrumentation techniques and a minimum of 2 years of experience in electronics/instrumentation supporting engineering or testing of military hardware. Use drawings, general and special test equipment to test cables, wiring harnesses, populated printed circuit boards, receivers, and transmitters.
Engineering Technician II AstrionEngineering Technician IIHuntsville, AlabamaThree (3) years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or two (2) years of applicable college/vocational/military/technical school and one (1) year of applicable experience in the assigned specialty area; and the following additional requirements: Instrumentation – Must have sixteen (16) weeks of civilian or military training in electronics or basic instrumentation techniques and at least one (1) of the three (3) years of experience must be in electronics/instrumentation supporting engineering or testing of military hardware. Support the LOCAITS lead engineer in the design, installation, production, and deployment of LOCAITS GPS/IMU kits on various aerial and ground vehicles platforms.
NewEngineering Technician IV Montgomery Personnel BoardEngineering Technician IVMontgomery, ALHigh school diploma or a GED and at least six (6) years of engineering experience, including reviewing construction site plans and the inspection of construction sites or environmental groundwater/ water sampling including two (2) years' experience supervising lower-level Engineering Technicians. Employees direct and oversee the inspection of construction projects by private contractors involving city rights-of-way, streets, subdivision and storm water system and are responsible for environmental groundwater and stormwater sampling for the City of Montgomery.
Metrology Engineering Technician Sigmatech, Inc.Metrology Engineering TechnicianHuntsville, ALSigmatech is seeking a Metrology Engineering Technician to support calibration, test, troubleshooting, repair, and sustainment activities for electronic and electromechanical systems in a Department of Defense environment. Related Military Occupational Specialty (MOS), technical trade school certification, associate degree in Engineering Technology, or equivalent technical training.
Electrical Engineering Technician IronMountain SolutionsElectrical Engineering TechnicianHuntsville, AlabamaMust possess a Bachelor's Degree in a technical, science or business discipline from an accredited college/university and 3 years of applicable experience or an Associates Degree and 5 years of applicable experience or 7 years of experience performing the job duties listed above or 7 years of military training in the assigned specialty area, or a combination thereof. Perform high-precision electrical and electronic fabrication, including PCB assembly and soldering of surface-mount and through-hole components in accordance with IPC J-STD requirements, custom cable and wiring harness fabrication, circuit card assembly (CCA), and RF chassis integration.
SCA - Engineering Technician IV Sanmina CorpSCA - Engineering Technician IVHuntsville, ALJob Purpose: SCA Engineering Technician IV (Service Contract Act) typically performs complex, non-routine technical tasks under minimal supervision, focusing on testing, troubleshooting, repairing, and documenting electro-mechanical and avionics systems faults. Key responsibilities of an SCA Engineering Technician IV include: Troubleshooting and Repair: Performing high-level, complex technical work such as circuit card assembly (CCA) repair down to the component level of resistors, capacitors, diodes, inductors and integrated circuits.
SCA - Engineering Technician Sanmina CorpSCA - Engineering TechnicianHuntsville, ALJob Purpose: SCA Engineering Technician II (Service Contract Act) typically performs complex, non-routine technical tasks under minimal supervision, focusing on testing, troubleshooting, repairing, and documenting electro-mechanical and avionics systems faults. Key responsibilities of an SCA Engineering Technician II include: Troubleshooting and Repair: Performing high-level, complex technical work such as circuit card assembly (CCA) repair down to the component level of resistors, capacitors, diodes, inductors and integrated circuits.
Engineering Technician III Axient LLCEngineering Technician IIIHuntsville, ALPerforming routine maintenance, installation/integration of various types of mechanical and instrumentation components such as strain gauges, pressure transducers, thermocouples, load cells, hydraulic actuators, tubing, etc. It involves supporting NASA's Structural Strength Test Branch, as well as contractor personnel, in research and development, configuration, and maintenance of test article systems and testing infrastructure.
Semiconductor Engineering Technician Booz Allen HamiltonSemiconductor Engineering TechnicianHuntsville, AlabamaSalary at Booz Allen is determined by various factors, including but not limited to location, the individual’s particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements. Onsite : If this position is listed as onsite, work will primarily be performed at a Booz Allen office or customer facility, where employees will collaborate directly with colleagues and customers as required by the role.
Avionics & Electrical Engineering Technician Bridger AerospaceAvionics & Electrical Engineering TechnicianHuntsville, ALFlight Test & Mechanic Solutions, Inc dba FMS Aerospace (FMS), a wholly owned subsidiary of Bridger, is a growing, flexible, customer-driven aircraft structural engineering and flight test company with manufacturing capability. Occasionally travel to hangars, bases, customer sites to facilitate successful system integration of mechanical and electrical and provide assistance as needed to Project Managers at onsite locations.
Engineering Technician III - Utility QualusEngineering Technician III - UtilityTrussville, AlabamaFull timeThe firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange.
NewEngineering Technician Actalent IncEngineering TechnicianMadison, AL$25–$32 / hourThe technician contributes directly to the design, validation, and quality assurance of cutting-edge UAV electronics by working closely with engineering teams in both development and manufacturing settings. The position focuses on hands-on electronic testing, assembly, and troubleshooting at both the circuit board and system levels, particularly within aerospace, defense, or military electronics environments.
Electronics Engineering Technician, Mid-Level Simulation Technologies, Inc.Electronics Engineering Technician, Mid-LevelHuntsville, ALFull timeWill interact in a general office setting environment with various personnel; participate in meetings and contribute to team success; deliver timely results and produce reports; receive and communicate information; may include telework. The company has been recognized as a "Best Place to Work" in 2020 and 2021, and as a "Best Place for Working Parents" in 2022-2026 by the Huntsville/Madison County Chamber of Commerce.
Engineering Technician III Terracon Consultants IncEngineering Technician IIIALICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT).
Construction Materials Testing (CMT) Engineering Technician III Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IIIAuburn, ALSteel American Welding Society (AWS) Certified Welding Inspector (CWI), or Structural Steel and/or nondestructive testing services: ASNT Level II Facilities Relevant certification for the services or project requirements (e.g. ICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding.
Engineering Technician Sanmina CorpEngineering TechnicianHuntsville, ALRecognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-agrowing segments of the global Electronics Manufacturing Services (EMS) market.
Engineering Technician II Axient LLCEngineering Technician IIHuntsville, ALThree (3) years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or two (2) years of applicable college/vocational/military/technical school and one (1) year of applicable experience in the assigned specialty area; and the following additional requirements: Instrumentation - Must have sixteen (16) weeks of civilian or military training in electronics or basic instrumentation techniques and at least one (1) of the three (3) years of experience must be in electronics/instrumentation supporting engineering or testing of military hardware. Support the LOCAITS lead engineer in the design, installation, production, and deployment of LOCAITS GPS/IMU kits on various aerial and ground vehicles platforms.
Engineering Technician II Karman Holdings IncEngineering Technician IIDecatur, ALHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems.
NewEngineering Technician (Mechanical) United States ArmyEngineering Technician (Mechanical)Huntsville, AL$84,439–$109,777 / yearTime-in-grade documentation: If you are applying for a higher grade and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old). From managing the Armys global supply chain to providing quality of life programs for Soldiers and families; from providing financial management and contracting capabilities to leading the way in data analytics, AMCs missions are wide ranging and critical.
ENGINEERING TECHNICIAN U.S. Department of DefenseENGINEERING TECHNICIANHuntsville, AL$83,935–$109,122 / yearTime-in-grade documentation: If you are applying for a higher grade and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old). Specialized Experience: One year of specialized experience which includes: applying methods and techniques of engineering with industrial/commercial Construction; overseeing and coordinating various aspects of construction project; monitoring contractors performance to ensure compliance with government policies and regulations.
Engineering Technician US Tech Solutions, Inc.Engineering TechnicianBessemer, AL$33–$38 / hourDemonstrated experience contributing to innovation-focused projects, including development of new products, systems, workflows, or construction methodologies. Data-driven mindset with ability to analyze production metrics, identify improvement opportunities, and measure results of implemented changes.
Engineering Technician- Senior Level- Huntsville, AL Dayton T. Brown, Inc.Engineering Technician- Senior Level- Huntsville, ALHuntsville, ALFull timeThe ideal candidate will need: Minimum of a High School Diploma / associate's degree in aerospace, electrical, mechanical or related fields highly desired. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work.
Construction Materials Testing (CMT) Engineering Technician II Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IIAuburn, ALICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide.
NewEngineering Technician United States ArmyEngineering TechnicianHuntsville, AL$74,678–$97,087 / yearTime-in-grade documentation: If you are applying for a higher grade and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old). About the Position: The installation rests in the beautiful hill and lake country of Central Texas between Killeen and Copperas Cove and is approximately 60 miles north of the capital city of Austin, 50 miles south of Waco, 160 miles south of Dallas, and 150 miles north of San Antonio.
Avionics & Electrical Engineering Technician Bridger Aerospace Group Holdings IncAvionics & Electrical Engineering TechnicianHuntsville, ALFlight Test & Mechanic Solutions Inc dba FMS Aerospace FMS a wholly owned subsidiary of Bridger is a growing flexible customer-driven aircraft structural engineering and flight test company with manufacturing capability. Occasionally travel to hangars bases customer sites to facilitate successful system integration of mechanical and electrical and provide assistance as needed to Project Managers at onsite locations.
Construction Materials Testing (CMT) Engineering Technician I Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IAuburn, ALRequirements: High school diploma or equivalent 6 months experience required Valid driver's license with acceptable violation history Preferred Certification: Obtain Nuclear Density Gauge certification within 6 months of hire Required Certification: Obtain ACI certification within 90 days of hire Successful completion of related internal safety certifications. Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide.
Engineering Technician I Terracon Consultants IncEngineering Technician IHoover, ALCommunicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Essential Roles and Responsibilities: Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties.
Drafter Engineering Technician III Utility Qualus Power Services CorpDrafter Engineering Technician III UtilityTrussville, ALThe firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange.
SCA - Engineering Technician - (108367) SanminaSCA - Engineering Technician - (108367)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Engineering Technician - (Seibi Tech) TNA Toyota Motor Engineering & Manufacturing North America CompanyEngineering Technician - (Seibi Tech)Carolina, North CarolinaToyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. The primary responsibility of this position is to execute as the North American initial machine set-up personnel (SV), increase Operation Availability (OA) through continuous improvement and problem-solving technical issues.
Product Engineering Technician- 2nd B Kasai North America, IncProduct Engineering Technician- 2nd BTalladega, ALAS Degree in Mechatronics, pre-engineering, related study, or three plus years manufacturing experience. Incumbents will follow any other instruction, and perform any other related duties, as may be required by their supervisor.
Engineering Technician- 2nd B Shift Kasai North America IncEngineering Technician- 2nd B ShiftTalladega, ALQualifications: Education Required: AS Degree in Mechatronics, pre-engineering, related study, or three plus years manufacturing experience. Skills Required: Microsoft Office Experience (Excel, Word, Project).
New1689 - General Engineering Technician Sigma Defense1689 - General Engineering TechnicianHuntsville, ALCandidate must possess or have the ability to obtain an active Secret security clearance or higher. The hired candidate will be responsible for the manual labor involved with mechanical assembly and integration.
New1711 - General Engineering Technician Sigma Defense1711 - General Engineering TechnicianHuntsville, ALRegular use of soldering iron, wire cutter/stripper/crimper, hand tools, power tools, digital multi-meter, and calipers. Candidate must possess or have the ability to obtain an active Secret security clearance or higher.
Engineering Technician Adtran Holdings IncEngineering TechnicianHuntsville, ALThis Engineering Technician may work on a range of projects with various Engineering Departments to include: Engineering, Document Control, Training, Tech Support, Design, Planning, Software, Test Design Engineering, Reliability Engineering, Mechanical Design, Component Engineering etc. This Engineering Technician is a skilled professional level position where the work is primarily focused on supporting and assisting ADTRAN Engineers in a variety of Engineering work to include designing, planning, assembling, testing, modifying designs, and systems.