NewManufacturing Engineer JobotManufacturing EngineerHuntsville, AL$105,000–$135,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications.
Electromechanical Technician Coast Personnel ServicesElectromechanical TechnicianHuntsville, AL$16–$19 / hourFull timePerforms in process real time failure analysis and evaluates the electrical and mechanical characteristics of systems and/or integrated circuits, components, sub-components and systems to determine the cause of failure as well as appropriate actions for immediate correction. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units.
NewElectronics Engineer Technician - Intermediate Tyonek Native CorporationElectronics Engineer Technician - IntermediateRedstone Arsenal, ALMust be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle.
NewElectronics Engineer Technician - Journeyman Tyonek Native CorporationElectronics Engineer Technician - JourneymanRedstone Arsenal, ALMust be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle.
Process Control Engineer/Technician Packaging Corporation of AmericaProcess Control Engineer/TechnicianAL$64,400–$129,600 / yearABB 800xA HMI, Delta V HMI, Allen Bradley PLCs, Paper Gauging, Entech Tuning, Pi Process Book, MPC implementation, network experience, computer hardware experience, and knowledge of process improvement methods. Responsibilities will include design, installation, and ongoing support for mill DCS hardware and software, technical support for process improvement projects, and close alliance with operations and maintenance to ensure stable and capable processes.
Technician- Manufacturing Engineer II USA (Crew D) First Solar IncTechnician- Manufacturing Engineer II USA (Crew D)AL$18.56–$25.98 / hourAbility to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
NewTechnician- Manufacturing Engineer I USA (Crew D) First Solar IncTechnician- Manufacturing Engineer I USA (Crew D)AL$18.56–$25.98 / hourAbility to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Technician- Manufacturing Engineer II USA (Crew A) First Solar IncTechnician- Manufacturing Engineer II USA (Crew A)AL$26–$32 / hourAbility to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Technician- Manufacturing Engineer I USA (Crew C) First Solar IncTechnician- Manufacturing Engineer I USA (Crew C)AL$18.56–$25.98 / hourAbility to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Technician- Manufacturing Engineer I USA (Crew B) First Solar IncTechnician- Manufacturing Engineer I USA (Crew B)AL$18.56–$25.98 / hourAbility to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Field Service Engineer/Low Voltage Technician - 1099 Lighthouse Integrated SolutionsField Service Engineer/Low Voltage Technician - 1099Huntsville, Alabama$22–$35Lighthouse Integrated Solutions, a national low-voltage dispatch company based in Alabama, is actively seeking motivated, reliable 1099 subcontractors for a variety of part-time to full-time low-voltage service opportunities in Huntsville, AL and surrounding areas. If you're a self-starter with hands-on experience in service calls, rollouts, installations, or structured cabling—this could be a great opportunity for you.
Engineering Technician II Science Applications International CorpEngineering Technician IIHuntsville, ALOur robust portfolio of offerings across the defense, space, intelligence, and civilian markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services. By providing the information below and checking the boxes referenced, you acknowledge and consent to SAIC''s Privacy Policy to include access and use of your information for the purposes of sharing your information for possible employment recruitment effects by SAIC and it''s third party vendors.
Engineering Technician IV Science Applications International CorpEngineering Technician IVHuntsville, ALOur robust portfolio of offerings across the defense, space, civilian, and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services. By providing the information below and checking the boxes referenced, you acknowledge and consent to SAIC''s Privacy Policy to include access and use of your information for the purposes of sharing your information for possible employment recruitment effects by SAIC and it''s third party vendors.
Engineering Technician 1 - 3rd Shift AstrionEngineering Technician 1 - 3rd ShiftHuntsville, AlabamaEnsure that simulated environments such as rain, salt, fog, high and low temperature, high and low humidity, altitude, etc. are properly calibrated and maintained. Communicate with engineers, technicians, and customers to discover and develop requirements, with the goal of optimizing and improving current and future processes.
Specialist-Engineer Tech Kinder Morgan, Inc.Specialist-Engineer TechNorthport, ALFull timePosition requires thorough knowledge of natural gas compression facilities, rotating machinery including reciprocating engines / compressors, gas turbines and / or electric motor driven centrifugal compressors, ancillary support systems such as air systems, cooling water systems, and medium voltage electrical distribution systems. The Specialist-Engineering Technician supports natural gas compressor stations and automation systems including: industrial gas turbine / centrifugal compressor trains, internal combustion engine / reciprocating compressor packages and ancillary equipment including fans, pumps, air compressors, and cooling towers.
Electrical Engineering Technician FMS AerospaceElectrical Engineering TechnicianHuntsville, ALWill work with a team of Electrical and Design Engineers and PMs to troubleshoot, design, and implement electrical systems supporting various military and commercial customers Provide offsite & onsite assistance and installation of electrical systems Mentored by avionics and electrical engineering technicians and junior level electrical engineers within the company Occasionally be asked to travel to hangars, bases, customer sites to facilitate successful system integration of mechanical and electrical and provide assistance as needed to Project Managers at onsite locations. 2-4 years' experience in avionics and/or electrical wiring systems Minimum of a high school diploma/GED IPC-620 certification is a must Experience reading electrical drawings Experience in a production/manufacturing setting Strong interpersonal skills and the ability to work proficiently with remotely located employees as well as in a team environment Proficiency in English (written and spoken) Must be U.S. citizen Must currently possess an active Department of Defense Secret clearance.
Senior Engineering Technician Karman Holdings IncSenior Engineering TechnicianDecatur, ALHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems.
Controls Technician 1 4P/504 4P ConsultingControls Technician 1 4P/504Montgomery, AlabamaThe Controls Technician will apply electrical and computer-based skills to ensure reliable operation of protection and control equipment, including microprocessor relays, programmable logic controllers (PLCs), sensors, motors, pumps, and associated systems. We are seeking a Controls Technician – Protection & Control (P&C) with 0–3 years of experience to support the installation, maintenance, calibration, and troubleshooting of protection and control systems used in power substations.
Engineering Technician C (NDT) L3Harris Technologies IncEngineering Technician C (NDT)Huntsville, ALJob Description: We are seeking an Engineering Technician (NDT) Level C to support our state‑of‑the‑art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which serves as our inert manufacturing facility for the fabrication and assembly of composite rocket motor hardware. Bachelor's degree with a minimum of 4 years of prior relevant experience; or a graduate degree with a minimum of 2 years of related experience; or, in lieu of a degree, a minimum of 8 years of prior related experience.
SCA - Engineering Technician Sanmina CorpSCA - Engineering TechnicianHuntsville, ALJob Purpose: SCA Engineering Technician II (Service Contract Act) typically performs complex, non-routine technical tasks under minimal supervision, focusing on testing, troubleshooting, repairing, and documenting electro-mechanical and avionics systems faults. Key responsibilities of an SCA Engineering Technician II include: Troubleshooting and Repair: Performing high-level, complex technical work such as circuit card assembly (CCA) repair down to the component level of resistors, capacitors, diodes, inductors and integrated circuits.
SCA - Engineering Technician IV Sanmina CorpSCA - Engineering Technician IVHuntsville, ALJob Purpose: SCA Engineering Technician IV (Service Contract Act) typically performs complex, non-routine technical tasks under minimal supervision, focusing on testing, troubleshooting, repairing, and documenting electro-mechanical and avionics systems faults. Key responsibilities of an SCA Engineering Technician IV include: Troubleshooting and Repair: Performing high-level, complex technical work such as circuit card assembly (CCA) repair down to the component level of resistors, capacitors, diodes, inductors and integrated circuits.
CAD Technician CFD Research CorpCAD TechnicianHollywood, ALThis position is a new role that will support a growing team of engineers and technicians and will focus on detailed CAD modeling, drawing creation, and documentation in support of technology development programs designed and prototyped at our new Hollywood, Alabama Engineering Test Center, located a short distance from our Headquarters in Huntsville AL. Based in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida.
Engineering Technician III AstrionEngineering Technician IIIHuntsville, Alabama5 years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or 2 years of applicable college/vocational/military/technical school and 3 years of applicable experience in the assigned specialty area; and the following additional requirements: Instrumentation – Experience must include successful completion of sixteen (16) weeks of civilian or military training in electronics or basic instrumentation techniques and a minimum of 2 years of experience in electronics/instrumentation supporting engineering or testing of military hardware. Use drawings, general and special test equipment to test cables, wiring harnesses, populated printed circuit boards, receivers, and transmitters.
Electrical Engineering Technician IronMountain SolutionsElectrical Engineering TechnicianHuntsville, AlabamaMust possess a Bachelor's Degree in a technical, science or business discipline from an accredited college/university and 3 years of applicable experience or an Associates Degree and 5 years of applicable experience or 7 years of experience performing the job duties listed above or 7 years of military training in the assigned specialty area, or a combination thereof. Perform high-precision electrical and electronic fabrication, including PCB assembly and soldering of surface-mount and through-hole components in accordance with IPC J-STD requirements, custom cable and wiring harness fabrication, circuit card assembly (CCA), and RF chassis integration.
Engineering Technician II AstrionEngineering Technician IIHuntsville, AlabamaThree (3) years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or two (2) years of applicable college/vocational/military/technical school and one (1) year of applicable experience in the assigned specialty area; and the following additional requirements: Instrumentation – Must have sixteen (16) weeks of civilian or military training in electronics or basic instrumentation techniques and at least one (1) of the three (3) years of experience must be in electronics/instrumentation supporting engineering or testing of military hardware. Support the LOCAITS lead engineer in the design, installation, production, and deployment of LOCAITS GPS/IMU kits on various aerial and ground vehicles platforms.
Metrology Engineering Technician Sigmatech, Inc.Metrology Engineering TechnicianHuntsville, ALSigmatech is seeking a Metrology Engineering Technician to support calibration, test, troubleshooting, repair, and sustainment activities for electronic and electromechanical systems in a Department of Defense environment. Related Military Occupational Specialty (MOS), technical trade school certification, associate degree in Engineering Technology, or equivalent technical training.
Embedded Systems Engineer EngeniusMicro, LLC.Embedded Systems EngineerHuntsville, ALFull timeWork with multidisciplinary team to design, test, and integrate electronics, firmware, and software for various additive manufacturing, autonomous systems, and sensor projects. EngeniusMicro seeks self-motivated, highly organized, and responsive employees able to work in a fast-paced, small team environment.
Systems Engineer - RF / Telemetry DESE Research, Inc.Systems Engineer - RF / TelemetryHuntsville, ALFull timeAs a small, family-oriented business, DESE provides a compelling benefits package including a generous profit-sharing plan, competitive salaries, and perhaps most importantly, the opportunity to work alongside talented professionals leveraging cutting-edge technologies to solve complex and engaging problems. DESE Research, Inc. is seeking a highly motivated and skilled RF / Telemetry Systems Engineer to support the design, integration, testing, and fielding of telemetry and radio frequency (RF) systems supporting Department of Defense platforms.
Electronics Engineering Technician, Mid-Level Simulation Technologies, Inc.Electronics Engineering Technician, Mid-LevelHuntsville, ALFull timeWill interact in a general office setting environment with various personnel; participate in meetings and contribute to team success; deliver timely results and produce reports; receive and communicate information; may include telework. The company has been recognized as a "Best Place to Work" in 2020 and 2021, and as a "Best Place for Working Parents" in 2022-2026 by the Huntsville/Madison County Chamber of Commerce.
Engineering Technician III - Utility QualusEngineering Technician III - UtilityTrussville, AlabamaFull timeThe firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange.
Protection & Control (P&C) Technician I 4P/671 4P ConsultingProtection & Control (P&C) Technician I 4P/671Birmingham, AlabamaWe are seeking a skilled Protection & Control (P&C) Technician I to join the Protection & Control (P&C) Field Services – Substation Integration & Automation (SIA) team within a utility and power environment. The position is primarily field-based and involves working directly within substations and industrial electrical environments.
NewO&M Senior Technician Metlen Energy & Metals PLCO&M Senior TechnicianBirmingham, ALPreventive & Corrective Maintenance: Develop and implement preventive maintenance plans in line with O&M contracts to maximise system availability and minimise downtime. Provide technical guidance and training to technicians and junior engineers, and support warranty claims, spare parts management, and technical troubleshooting.
NewEngineering Technician IV Montgomery Personnel BoardEngineering Technician IVMontgomery, ALHigh school diploma or a GED and at least six (6) years of engineering experience, including reviewing construction site plans and the inspection of construction sites or environmental groundwater/ water sampling including two (2) years' experience supervising lower-level Engineering Technicians. Employees direct and oversee the inspection of construction projects by private contractors involving city rights-of-way, streets, subdivision and storm water system and are responsible for environmental groundwater and stormwater sampling for the City of Montgomery.
Avionics & Electrical Engineering Technician Bridger AerospaceAvionics & Electrical Engineering TechnicianHuntsville, ALFlight Test & Mechanic Solutions, Inc dba FMS Aerospace (FMS), a wholly owned subsidiary of Bridger, is a growing, flexible, customer-driven aircraft structural engineering and flight test company with manufacturing capability. Occasionally travel to hangars, bases, customer sites to facilitate successful system integration of mechanical and electrical and provide assistance as needed to Project Managers at onsite locations.
Engineering Technician III Axient LLCEngineering Technician IIIHuntsville, ALPerforming routine maintenance, installation/integration of various types of mechanical and instrumentation components such as strain gauges, pressure transducers, thermocouples, load cells, hydraulic actuators, tubing, etc. It involves supporting NASA's Structural Strength Test Branch, as well as contractor personnel, in research and development, configuration, and maintenance of test article systems and testing infrastructure.
Field Technician Level 1 Adex CorporationField Technician Level 1Birmingham, ALPosition involves performing basic, often supervised, installation and maintenance tasks in telecommunications central offices, focusing on the physical aspects like running cables, racking equipment, and initial site preparation. This level requires familiarity with basic tools and equipment, the ability to work under direction, perform continuity testing, maintain clean work areas, and adhere to safety procedures.
Engineering Technician II Axient LLCEngineering Technician IIHuntsville, ALThree (3) years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or two (2) years of applicable college/vocational/military/technical school and one (1) year of applicable experience in the assigned specialty area; and the following additional requirements: Instrumentation - Must have sixteen (16) weeks of civilian or military training in electronics or basic instrumentation techniques and at least one (1) of the three (3) years of experience must be in electronics/instrumentation supporting engineering or testing of military hardware. Support the LOCAITS lead engineer in the design, installation, production, and deployment of LOCAITS GPS/IMU kits on various aerial and ground vehicles platforms.
Drafter Engineering Technician III Utility Qualus Power Services CorpDrafter Engineering Technician III UtilityTrussville, ALThe firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange.
Avionics & Electrical Engineering Technician Bridger Aerospace Group Holdings IncAvionics & Electrical Engineering TechnicianHuntsville, ALFlight Test & Mechanic Solutions Inc dba FMS Aerospace FMS a wholly owned subsidiary of Bridger is a growing flexible customer-driven aircraft structural engineering and flight test company with manufacturing capability. Occasionally travel to hangars bases customer sites to facilitate successful system integration of mechanical and electrical and provide assistance as needed to Project Managers at onsite locations.
Substation Engineer 2 (Remote) SOLV Energy LLCSubstation Engineer 2 (Remote)ALRemote$89,527–$111,909 / yearIn addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Collaborate with cross-functional teams, including transmission planners, protection engineering, control systems specialists, PV engineering, and BESS engineering to ensure the seamless integration of substations into the overall power grid.
RTU Technician ManpowerRTU TechnicianTrussville, AL$70,000–$120,000 / yearFull timeEducation: Associate degree or technical certification in Electrical Engineering Technology, Industrial Controls, or a related discipline (equivalent experience may substitute). Experience: 5+ years in electrical or controls systems work within the power industry or related fields.
Quality Technician 2nd Shift CloudRay IncQuality Technician 2nd ShiftDecatur, AL$20–$24 / hourCloudRay is a trusted staffing partner based in East Windsor, NJ, with 25+ years of experience connecting skilled professionals with leading companies across the U.S. We specialize in industrial, logistics, IT, hospitality, and skilled trades staffing, helping candidates find stable opportunities with long-term growth potential. Uses basic measurement tools to complete inspections (i.e. calipers, tapes, micrometers, pin/plug gages, blocks, indicators, surface plate, etc.
Field Service Technician III Motorola Solutions IncField Service Technician IIIALRemote$70,000–$80,000 / year2+ years of experience in one of the following: LMR, RF Systems, Radio Frequency, Radio Communications, System Administration, Wired/Wireless Communication Systems, Networking Equipment, IT, IT Systems, Zone Core, ASTRO Networking, Microsoft Active Directory, McAfee Security Suite, MCC7500 Dispatch, NICE Logging, E911, Dispatch, Telecommunications, Public Safety, Engineering, Networking equipment or Military experience. Working closely with other FSTs and Engineers, the SUA FST is responsible for both the strategic design and the daily execution of technical efforts, including developing a strategy for and then carrying out the various upgrades, migrations, and system expansion plans.
NewTransmitter Engineer Lead - Kwajalein Atoll RGNextTransmitter Engineer Lead - Kwajalein AtollHuntsville, ALProvide design modifications and improvements for both ALCOR & MMW transmitters; this includes creating schematics and implementing modifications as well as directing activities of technicians and helpers to properly install these design modifications. RGNext employees open portals to space by providing operation and sustainment of mission-critical systems that launch and track Department of Defense, civil, commercial, and international space launch rockets!
Technician- Reli &Test Eng II USA First Solar IncTechnician- Reli &Test Eng II USAAL$23.37–$32.69 / hourThe primary role of the Engineering Technician II is to support Reliability Engineers with multi-task assignments related to Reliability Lab and Field/Outdoor Test operations. Identify durability/stability and equipment defects and issues and complete failure analysis and result interpretation with minimal guidance (Level 3 failure analysis and troubleshooting).
NewEngineering Design Technician DuravantEngineering Design TechnicianMontgomery, ALThis role involves collaborating with the engineering team to develop designs that meet project specifications and manufacturing requirements, using SolidWorks or other similar 3D software. Job Summary: The Engineering Design Tech will be responsible for creating detailed 3D models, assemblies, and technical drawings for mechanical components and systems.
Thrust Vector Control Electromechanical Technician - (ET3) Amentum Services IncThrust Vector Control Electromechanical Technician - (ET3)Huntsville, ALThe selected candidate will work integrally with ESSCA Group, customer engineers, and engineering technicians as needed to perform training and work assignments including, but not limited to: Perform training assignments designed to develop professional working knowledge and abilities. The position requires hands-on experience in assembly, testing, troubleshooting, and fabrication in support of the Thrust Vector Control Test Laboratory, including hydraulic system operations, tube fitting, welding, machinery operation, and development activities.
Thrust Vector Control Electromechanical Technician - (ET3) AmentumThrust Vector Control Electromechanical Technician - (ET3)Huntsville, AlabamaThe selected candidate will work integrally with ESSCA Group, customer engineers, and engineering technicians as needed to perform training and work assignments including, but not limited to: Perform training assignments designed to develop professional working knowledge and abilities. The position requires hands-on experience in assembly, testing, troubleshooting, and fabrication in support of the Thrust Vector Control Test Laboratory, including hydraulic system operations, tube fitting, welding, machinery operation, and development activities.
Integration Technician Griffon AerospaceIntegration TechnicianMadison, ALFull timeThe ideal candidate will have hands-on experience in electronic testing, prototyping, and assembly at both the circuit board and system levels, with a background in either aerospace/defense industry or military electronics. We pride ourselves on being a lion-hearted partner, designing, building, and flying the most capable and intelligent aerial systems that give our servicemen an unfair advantage wherever they fly.
Lead Engineer Protection and Control QualusLead Engineer Protection and ControlTrussville, AlabamaFull timeDevelopment of complete engineering design packages for protective relaying and communications systems, including one-line diagrams, three-line diagrams, AC schematics, DC schematics, logic and functional diagrams, panel layouts, control house layouts, wiring/connection diagrams, interconnection diagrams, relaying equipment specifications and bill of materials. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services.