Production Test Technician Coast Personnel ServicesProduction Test TechnicianHuntsville, AL$17–$19 / hourFull timeThis role is essential in ensuring the quality, reliability, and functionality of electronic products through rigorous testing, inspection, and troubleshooting. Conduct comprehensive testing of assembled electronic devices using automated test equipment and manual methods to verify functionality and performance.
Electromechanical Technician Coast Personnel ServicesElectromechanical TechnicianHuntsville, AL$16–$19 / hourFull timePerforms in process real time failure analysis and evaluates the electrical and mechanical characteristics of systems and/or integrated circuits, components, sub-components and systems to determine the cause of failure as well as appropriate actions for immediate correction. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units.
NewElectronics Technician U.S. Department of DefenseElectronics TechnicianHuntsville, AL$99,218–$153,382 / yearCoordinating microelectronics manufacturing and validation efforts, such as automated printed circuit board (PCB) assembly processes, manual PCB soldering/rework processes; semiconductor wafer processes, such as dicing and grinding; microcircuit assembly processes, such as die bonding and wire bonding; and/or microelectronics system validation processes, such as X-Ray, visual microscopy, and electrical test via oscilloscopes and other signal/network analysis equipment. You may qualify at the NJ-04, if you fulfill the following qualifications: A. One year of specialized experience equivalent to the NJ-03 (GS-11) grade level in the Federal service as listed below: Diagnosing, repairing, calibrating, installing, and/or maintaining laboratory and manufacturing equipment both as a technical expert and as a liaison between cognizant engineers and equipment vendors.
ELECTRONICS TECHNICIAN (RADAR) United States Air ForceELECTRONICS TECHNICIAN (RADAR)Huntsville, AL$61,722–$97,087 / year2) Integrates and maintains various subsystems such as transmitters, receivers, Digital Target Extractors (DTE), Theatre Missile Defense processors (TMD), Identification Friend or Foe (IFF), Situation Display Console (SDC), Electronic Counter Measures (ECM) and Electronic Counter Counter Measures (ECCM). SPECIALIZED EXPERIENCE: GS-09 - must have 1-year equivalent to at least next lower grade level experience, education, or training in installing, testing, and supporting complex electronics equipment, solving technical problems, leading small project teams, and reviewing instructions for the repair, modification and maintenance equipment and related test-set equipment.
Electronics Soldering Technician III Redwire Defense TechElectronics Soldering Technician IIIHuntsville, AL$26–$34 / hourFull timeManufactures and assembles cables and wire harnesses, by soldering wires into connectors (cup soldering) and crimping various terminals to populate into housings. The electronic technician verifies that products meets all functional requirements, and completes required configuration and calibration activities.
Electronics Soldering Technician II Redwire Defense TechElectronics Soldering Technician IIHuntsville, AL$23–$31 / hourFull timeManufactures and assembles cables and wire harnesses, by soldering wires into connectors (cup soldering) and crimping various terminals to populate into housings. The electronic technician verifies that products meets all functional requirements, and completes required configuration and calibration activities.
ELECTRONICS TECHNICIAN - DIRECT HIRE AUTHORITY United States Air ForceELECTRONICS TECHNICIAN - DIRECT HIRE AUTHORITYHuntsville, AL$71,957–$113,185 / yearSkill in the interpretation of technical data such as drawings, schematics, blueprints, and specifications of complete electronic systems; in analyzing problems in integrated/interfacing systems involving numerous complex circuits; and in using complex electronic and electromechanical test and measuring equipment using integrated test functions for different purposes. This experience must have included the use of schematic diagrams, a variety of test equipment, and the application of appropriate electronic formulas involved in such duties as testing, troubleshooting, modifying, designing, calibrating, installing, maintaining, repairing, constructing, developing, and instructing on electronic equipment, or similar functions.
NewElectronics Soldering Technician I Redwire Defense TechElectronics Soldering Technician IHuntsville, AL$20–$28 / hourFull timeManufacturing and assembling cables and wire harnesses, by soldering wires into connectors (cup soldering) and crimping various terminals to populate into housings. Employees may be required to use personal protective equipment, including safety glasses, safety shoes, and shop coats, to ensure safety in the production environment.
Electronics Technician TCSElectronics TechnicianHuntsville, ALTroubleshoots technical problems and issues, determines technical solutions in accordance with product and customer specifications, and recommends actions to company or customer representatives for coordinative product solutions. Associate Certified Electronic Technician (CETs) certification or equivalent; or demonstrated experience with soldering, troubleshooting and testing in lieu of CET.
Senior Electronics Debug Technician TSCSenior Electronics Debug TechnicianHuntsville, AlabamaTroubleshoot electronic assemblies down to the component level to support product reliability and repair, while diagnosing and resolving issues in both RF and digital systems to return failed units to full functionality. Set up, calibrate, and validate test systems to ensure accuracy and repeatability, and present findings clearly to both technical and non-technical stakeholders.
Electronics Technician IV - Kwajalein Atoll - 3825 Range Generation Next LLCElectronics Technician IV - Kwajalein Atoll - 3825Huntsville, ALProvide support to receiver, transmitter and hardware engineers during design and implementation of improvement and modernization (I&M) projects involving receivers, transmitters, servos, and antenna subsystems. Employees enjoy a robust benefit package on day one, which includes medical, dental, vision, disability and life insurances, generous Paid Time Off and holiday pay, a retirement savings plan with a company match and vesting on day one!
NewElectronics Technician U.S. Department of JusticeElectronics TechnicianHuntsville, AL$77,983–$101,383 / yearIf you are on active duty and expect to be discharged or released from active duty service within 120 days, you may submit a Certificate of Release or Discharge from Active Duty from the appropriate Branch Personnel Office containing the following information: (1) the military service dates including the expected discharge or release date; (2) and the character of service (must be an honorable or general discharge); and (3) any qualifying service/campaign/expeditionary medals. Maintains the physical security of the institution through installation, maintenance and repairs of an array of electronic systems inclusive, but not limited to, PBX telephone switch, trunked radio systems, fire alarm systems, perimeter detection systems, programmable logic controllers and CCTV/DVR systems.
Associate Electronics Hardware Technician (Temporary, 1st Shift) SRC IncAssociate Electronics Hardware Technician (Temporary, 1st Shift)Huntsville, AL$24–$25 / hourSRCTec, LLC is a manufacturing and life cycle management company specializing in the cost-effective production of high-quality, high-reliability, advanced military electro-mechanical products. SRCTec, LLC is currently seeking a temporary Associate Electronics Hardware Technician to support manufacturing operations on 1st shift (7:00 AM - 3:30 PM) at our location in Syracuse, NY.
Associate Electronics Hardware Technician (1st Shift, Temp) SRC IncAssociate Electronics Hardware Technician (1st Shift, Temp)Huntsville, AL$23–$25 / hourSRCTec, LLC is a manufacturing and life cycle management company specializing in the cost-effective production of high-quality, high-reliability, advanced military electro-mechanical products. SRCTec, LLC is currently seeking a temporary Associate Electronics Hardware Technician to support manufacturing operations on 1st shift (7:00 AM - 3:30 PM) at our location in Syracuse, NY.
Senior Electronics Lab Assembly / Solder Technician RTX CorpSenior Electronics Lab Assembly / Solder TechnicianHuntsville, ALRTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.
Senior Electronics Lab Assembly / Solder Technician RTXSenior Electronics Lab Assembly / Solder TechnicianHuntsville, AlabamaActive and existing security clearance required after day 1 At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Electronics/Mechanical Assembly Technician-2nd shift LeidosElectronics/Mechanical Assembly Technician-2nd shiftHuntsville, AlabamaLeidos Defense Systems Electronics Manufacturing is seeking a 2nd Shift Electronics/Mechanical Assembly Technician to join our team that supports assembly of a variety of hardware including electrical chassis, cables, printed circuit board assemblies and electro-mechanical assembly efforts. April 28, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Electronics Mechanical Assembly Technician Leidos Holdings IncElectronics Mechanical Assembly TechnicianHuntsville, AL$48,100–$86,950 / yearLeidos Defense Systems Electronics Manufacturing is seeking a Electronics/Mechanical Assembly Technician to join our team that supports assembly of a variety of hardware including electrical chassis, cables, printed circuit board assemblies and electro-mechanical assembly efforts. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
Electronics/Mechanical Assembly Technician-2nd shift# Leidos Holdings IncElectronics/Mechanical Assembly Technician-2nd shift#Huntsville, AL$35,100–$63,450 / yearLeidos Defense Systems Electronics Manufacturing is seeking a 2nd Shift Electronics/Mechanical Assembly Technician to join our team that supports assembly of a variety of hardware including electrical chassis, cables, printed circuit board assemblies and electro-mechanical assembly efforts. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
Mid-Level Electronics Debug Technician TSCMid-Level Electronics Debug TechnicianHuntsville, AlabamaPerforms technical functions related to the support of development engineering activities such as set up, operation, maintenance, modification, circuit testing, calibration, and troubleshooting of electronic or electro-mechanical systems, experimental design circuitry, proto-type models or specialized test equipment. Conducts engineering/ development tests and detailed experimental testing to collect design data or assist in general research work.
Electronics Engineering Technician, Mid-Level Simulation Technologies, Inc.Electronics Engineering Technician, Mid-LevelHuntsville, ALFull timeWill interact in a general office setting environment with various personnel; participate in meetings and contribute to team success; deliver timely results and produce reports; receive and communicate information; may include telework. The company has been recognized as a "Best Place to Work" in 2020 and 2021, and as a "Best Place for Working Parents" in 2022-2026 by the Huntsville/Madison County Chamber of Commerce.
Electronics Assembly Technician, Mid-level Simulation Technologies, Inc.Electronics Assembly Technician, Mid-levelHuntsville, ALFull timeSimTech, Inc., recognized as one of the 2026 Best Places for Working Parents , is seeking an Electronics Assembly Technician, Mid-level , to fill multiple positions in support of the PM Mounted Armored Vehicle Bradley Fighting Vehicle platform. Operate a full range of electrical and mechanical assembly tools including wire strippers, crimpers, soldering irons, heat guns, torque wrenches, rivet guns, drill presses, and precision measuring instruments.
NewElectronics Engineer Technician - Intermediate Tyonek Native CorporationElectronics Engineer Technician - IntermediateRedstone Arsenal, ALMust be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle.
NewElectronics Engineer Technician - Journeyman Tyonek Native CorpElectronics Engineer Technician - JourneymanALMust be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle.
Electronics Worker Leader U.S. Department of Veterans AffairsElectronics Worker LeaderHuntsville, AL$41.53–$48.45 / hourAdditional Duties Include But Not Limited To: Performs and leads complex installation, maintenance, troubleshooting, and repair of electronic systems including Fire Alarm Systems, Building Automation Systems, Building Egress and Ingress Systems, Security Camera Systems, Pneumatic Tube Systems, Nurse Call Systems, Patient Wander Systems, Radio Communication Systems, Patient Entertainment Systems, Automatic Door Operators, and Communication Network Systems. Please make sure you have included other documents required for your application, such as a copy of your transcript (if using education to qualify), SF-50s (current/former Federal employees), documentation to support Veterans Preference claims, or ICTAP/CTAP documentation (for displaced Federal employees).
Electronics Engineer U.S. Department of DefenseElectronics EngineerHuntsville, AL$56,039–$121,422 / yearvoltmeter, ammeter, oscilloscope, etc.), and recognizing performance bounds, under oversight of senior level engineers, to ensure the correct (or adequate) tool diagnostic for a given electronic test is utilized; Completing assignments by following specific instructions and procedures, in strict compliance with instructions, within allowable time frames, priorities, anticipated problems, etc; Working assignments that start less difficult and gradual become more complex and involved in nature as knowledge is gained from previous experience and with more frequent repetition of applicable and pertinent regulations, procedures, and guidelines, while proactively seeking guidance and assistance for situations not covered by instructions; Referring problem situations and deviations to those in a position of authority resolution and/or guidance. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph 1.Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence.
Electronics Tech Maintenance IV - Kwajalein Atoll - 3859 Range Generation Next LLCElectronics Tech Maintenance IV - Kwajalein Atoll - 3859Huntsville, ALBenefits of Working at RGNext: Employees enjoy a robust benefit package on day one, which includes medical, dental, vision, disability and life insurances, generous Paid Time Off and holiday pay, a retirement savings plan with a company match and vesting on day one! Eight (8) years of electronics technician experience including high voltage systems, high power electronics and RF transmission equipment experience.
NewElectronics Testing Technican DometicElectronics Testing TechnicanHuntsville, ALAs Electronics Test Technician of the MPS team, you will be involved in focusing on performing product design verification, validation, launch and support of products and components focused on Marine AC / DC charging systems, lithium-ion battery integration, connectivity, and mobile power solutions for inboard and outboard leisure craft. Our Marine organization is a trusted provider of innovative solutions for the worldwide boating and boat building industry, and we recently expanded our scope to lead the boating industry into an electrified future.
Electronics Division Director EngeniusMicro, LLC.Electronics Division DirectorHuntsville, ALFull timeCore focus areas: people management; program management; customer relationship management; technical proficiency in the laboratory; and strategic planning Manage a small team of approximately 5 engineers and technicians. Perform work in which the principles, theories, and general body of knowledge of electrical engineering are required and serve as a Principal Investigator for RF, microelectronics, autonomous systems, and sensor initiatives.
ELECTRONICS MECHANIC United States ArmyELECTRONICS MECHANICHuntsville, AL$31.47–$36.68 / hour3) Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, other moderately complex systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. As a ELECTRONICS MECHANIC, WG-2604-10, you will perform the following duties: (1) Performs troubleshooting and routine repairs on individual components and moderately complex systems of launch pod/containers (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assemblies (M/LPA), trainer missile simulator modules, and various like items.
NewElectronics Testing Technican Marine ServicesElectronics Testing TechnicanHuntsville, ALThis position reports to the Engineering Manager and will work in Huntsville, AL.About the positionAs Electronics Test Technician of the MPS team, you will be involved in focusing on performing product design verification, validation, launch and support of products and components focused on Marine AC / DC charging systems, lithium-ion battery integration, connectivity, and mobile power solutions for inboard and outboard leisure craft. Conduct design validation tests (environmental, EMC, HASS / HALT, etc.)Work in multi‑function new product development teams, including program/product management, manufacturing engineering, supply chain management and production.
Electronic Technician I Chenega CorporationElectronic Technician IHuntsville, ALChenega Integrated Security Solutions is seeking a motivated Electronic Technician I to support the installation, maintenance, and troubleshooting of secure electronic and communications systems for a government customer. Conduct testing and diagnostics using electronic test equipment such as multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.
Electromechanical Technician Radiance Technologies IncElectromechanical TechnicianHuntsville, ALSuccessful candidates will be quality-focused with experience installing, testing, troubleshooting, and repairing various mechanical and electronic systems in accordance with technical specifications, engineering instructions, and DoD regulations. Ability to perform and/or assist in all activities, including the use of hand and power tools, lifting heavy objects, and working with industrial chemicals and adhesives such as epoxy, glues, paints, and cleaners.
Senior Electromechanical Technician Radiance Technologies IncSenior Electromechanical TechnicianHuntsville, ALSuccessful candidates will be quality-focused with experience installing, testing, troubleshooting, and repairing various mechanical and electronic systems in accordance with technical specifications, engineering instructions, and DoD regulations. Ability to perform and/or assist in all activities, including the use of hand and power tools, lifting heavy objects, and working with industrial chemicals and adhesives such as epoxy, glues, paints, and cleaners.
Electronic Technician I Chenega Integrated Security SolutionsElectronic Technician IHuntsville, AlabamaFull timeOverview: Chenega Integrated Security Solutions is seeking a motivated Electronic Technician I to support the installation, maintenance, and troubleshooting of secure electronic and communications systems for a government customer. Conduct testing and diagnostics using electronic test equipment such as multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.
NewElectronic Technician (Level 2 OR 3) Northrop Grumman CorpElectronic Technician (Level 2 OR 3)Huntsville, AL$25.72–$42.84 / hourSupports production floor operations, supporting tasks of various complexity and scope relating to system level testing of launch vehicle subsystems such as ordnance verification, RF systems, telemetry verification, flight termination system, and flight simulation. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation''s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon.
New(Skillbridge) Electronic Technician (Level 2 OR 3) Northrop Grumman Corp(Skillbridge) Electronic Technician (Level 2 OR 3)Huntsville, ALSupports production floor operations, supporting tasks of various complexity and scope relating to system level testing of launch vehicle subsystems such as ordnance verification, RF systems, telemetry verification, flight termination system, and flight simulation. This program provides a comprehensive internship experience including professional development, networking with leadership, and training specifically focused on NG leadership principles, company history, customer/stakeholder engagement, product and service overview, and core job responsibilities.
Integration Technician Griffon AerospaceIntegration TechnicianMadison, ALFull timeThe ideal candidate will have hands-on experience in electronic testing, prototyping, and assembly at both the circuit board and system levels, with a background in either aerospace/defense industry or military electronics. We pride ourselves on being a lion-hearted partner, designing, building, and flying the most capable and intelligent aerial systems that give our servicemen an unfair advantage wherever they fly.
SMT SOLDERING TECHNICIAN CloudRay IncSMT SOLDERING TECHNICIANLacey s Spring, AL$18–$20 / hourCloudRay, based in East Windsor, NJ, is a trusted staffing partner with 25+ years of industry experience, connecting skilled talent with leading companies across the U.S. We specialize in industrial, logistics, IT, hospitality, and skilled trades staffing — ensuring candidates find stable opportunities with growth potential. Precisely assemble PCBs by placing surface mount components using hand tools, power tools, and automated equipment.
CCA Rework Technician The Structures Company, LLCCCA Rework TechnicianHuntsville, AL$34As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Assembles components onto circuit boards including transistors, capacitors, integrated circuits, relays, resistors, and other electronic parts.
Integration Technician Griffon Aerospace IncIntegration TechnicianMadison, ALThe ideal candidate will have hands-on experience in electronic testing prototyping and assembly at both the circuit board and system levels with a background in either aerospacedefense industry or military electronics. We pride ourselves on being a lion-hearted partner designing building and flying the most capable and intelligent aerial systems that give our servicemen an unfair advantage wherever they fly.
Electronic Industrial Controls Technician White House USAElectronic Industrial Controls TechnicianHuntsville, ALSchedule A (Disability Appointment): Documentation of eligibility for employment under Schedule A can be obtained from a licensed medical professional (e.g., a physician or other medical professional certified by a state, the District of Columbia, or a U.S. territory to practice medicine); a licensed vocational rehabilitation specialist (i.e., state or private); or any Federal agency, state agency, or agency of the District of Columbia or a U.S. territory that issues or provides disability benefits. OPTIONAL:Although this position does not have an educational requirement; possession of the following supports knowledge of practical application, and is highly desired, but not required: Possesion of an Associate degree in an ABET-accredited program in one of the following fields: Electro-mechanics/mechatronics, Industrial maintenance, or Process control.
IBD Field Service Technician LeidosIBD Field Service TechnicianHuntsville, AlabamaThe National Security Sector at Leidos has an exciting opportunity for an IBD-K Field Service Technician to support engineering and technical services of Force Protection Systems (FPS) Family of Systems (FOS) to the IBD-SS program with operations located in SWA. April 29, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Advanced Debug Test Technician - (108704) SanminaAdvanced Debug Test Technician - (108704)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Advanced Debug Test Technician - (108702) SanminaAdvanced Debug Test Technician - (108702)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Quality Technician - (108465) SanminaQuality Technician - (108465)Huntsville, ALJob Purpose: Works in concert with Quality Engineering and Compliance staff with the primary focus of assisting as needed to ensure that Manufacturing and Quality processes produce articles that meet or exceed customer expectations. From tactical communications systems to airborne communications and information processing, we deliver high-reliability solutions that keep our first responders and war-fighters connected and protected in the field.
PCBA Soldering Technician-2nd shift LeidosPCBA Soldering Technician-2nd shiftHuntsville, AlabamaJanuary 26, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
Cable Assembly Technician 2nd shift LeidosCable Assembly Technician 2nd shiftHuntsville, AlabamaApril 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
PCBA Conformal Coating Technician-2nd shift LeidosPCBA Conformal Coating Technician-2nd shiftHuntsville, AlabamaApril 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
PCBA Conformal Coating Technician LeidosPCBA Conformal Coating TechnicianHuntsville, AlabamaApril 13, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.