UNKNOWN

FEED

Respect the Individual: Demonstrates and encourages respect for others; drives a positive associate and customer/member experience for all;embraces differences in people, cultures, ideas, and experiences; supports workplaces where associated feel seen and connected through a cultureof belonging, so all associates thrive and perform; contributes to an environment allowing everyone to bring their best selves to work. Act with Integrity: Follows the law, our code of conduct and company policies, and encourages others to do the same; supports an environment whereassociates feel comfortable sharing concerns; reinforces our culture of non-retaliation; listens to concerns raised by associates and takes action; actswith accountability for achieving results in a way that is consistent with our values.

HOUR

What started small, with a single discount store and the simple idea of selling more for less, has grown over the last 50 years into the largest retailer in the world. Each week, nearly 265 million customers and members visit our more than 11,200 stores under 55 banners in 27 countries and eCommerce websites in 10 countries. With fiscal year 2018 revenue of $500.3 billion, Walmart employs over 2.2 million associates worldwide. Walmart continues to be a leader in sustainability, corporate philanthropy and employment opportunity. It’s all part of our unwavering commitment to creating opportunities and bringing value to customers and communities around the world.

Walmart

(USA) Master Electrician, Facility Services

ea_via_bold

Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. Strong work experience maintaining and troubleshooting controls systems, dedicated applications, Analyzer and F&G, such as – but not limited to, System administration, backup/recovery programs, access control, alarm management, and cybersecurity interfaces.

CP Express Operations

Technician, Instrument & Controls - CPX

FULL_TIME

Responsible for the connection of control panels, application requirements, wire concealment, and security software installation Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.). Must possess a valid driver’s license with at least one year of driving experience, a clean driving record (no major violations within the last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by company policy, and the ability to safely operate a vehicle.

Allied Universal provides unparalleled service, systems and solutions to the people and business of our communities, and is North America's leading security services provider. With over 140,000 employees, Allied Universal delivers high-quality, tailored solutions, which allows clients to focus on their core business. For more information: 866.825.5433 or <a href="http://www.aus.com/" target="_blank">www.AUS.com</a>


Allied Universal

Security Installation Technician III

[AW]-iCims

The Engineer II - Protection Analyst is a professional position for an electrical engineer with experience in monitoring the performance and capabilities of generation and transmission elements, devices, and protection systems. Champions a corporate culture that emphasizes transparency, integrity, safety, environmental responsibility, employee development, diversity and inclusion, customer service, and operational excellence.

Cleco Corporate Holdings LLC

Engineer - Protection Analyst

Operates Doble Power Factor tester, Vanguard Speed Trace analyzer, Parts per million (PPM) tester, Transformer Turns Ratio (TTR), Dissolved Gas Analysis (DGA), Megger and other test equipment. Performs the installation, testing, maintenance and repair of high voltage circuit breakers and power transformers in transmission, distribution and generation stations.

Substation Technician

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Highly organized with a strong ability to handle multiple prioritiesAbility to network across multiple stakeholders to ensure tasks are completed efficiently and correctly.

YEAR

Jacobs Solutions Inc

Construction Project Administrator

ADAPTED_NOW

In this role, you'll participate in inspections, prepare technical reports, develop repair and design solutions, and collaborate with project managers to deliver practical, constructible outcomes for our clients. APTIM Environmental & Infrastructure, LLC is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace https://aptim.makeityoursource.com/.

APTIM

Port Service Project Engineer

The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services. Qualus offers a competitive benefits package for eligible employees, which may include Medical, Dental, Vision, Life Insurance, Short- and Long-Term Disability coverage, Retirement Savings Plans (including employer matching where applicable), Flexible Spending and/or Health Spending Accounts, Employee Assistance Programs (EAP), Parental Leave, Paid Time Off, and Company Holidays.

Qualus Power Services Corp

Senior Project Controls Specialist

As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Requirements: Bachelors degree in Electrical Engineering, Construction Management or related field; OR 2 years prior experience in related field via internships, co-ops and/or industry employment.

A provider of critical infrastructure systems, EMCOR gives life to new structures and sustains life in existing ones by its planning, installing, operating, maintaining, and protecting the sophisticated and dynamic systems that create facility environments—such as electrical, mechanical, lighting, air conditioning, heating, security, fire protection, and power generation systems—in virtually every sector of the economy and for a diverse range of businesses, organizations, and government.

EMCOR Group Inc

Construction Project Engineer

POSITION SUMMARY: Conducts analytical studies on engineering proposals to develop design for products by performing the following duties. Uses computer assisted engineering and design software and equipment to perform engineering and design tasks.

Oil States International Inc

Sr Project Engineer

As a leading provider of mechanicaland electrical construction, facilities services, and energy infrastructure,we offer employess a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and sucess. Bachelor's degree in Electrical Engineering, Construction Management or related field; OR 2 years' prior experience in related field via internships, co-ops and/or industry employment.

Project Engineer

PART_TIME

Conducts analytical studies on engineering proposals to develop design for products by performing the following duties. Uses computer assisted engineering and design software and equipment to perform engineering and design tasks.

OIL STATES SKAGIT SMATCO, LLC

While performing the duties of this job, the employee is occasionally exposed to wet or humid conditions (non-weather); fumes or airborne particles; outdoor weather conditions; extreme cold (non-weather); extreme heat (nonweather); risk of electrical shock; and risk of radiation. POSITION OVERVIEWUnder the direct supervision of the Engineering Supervisor, direct the work of other personnel and work with/without supervision to configure different types of electrical and avionics systems associated with several different types of aircraft/rotorcraft.

PHI Aviation

Senior Electronics/Avionic Systems Designer

Develop, implement, and manage core I&E Reliability programs at the site, including: Instrument and Electrical Integrity, Safety Instrumented Systems, PM and PDM programs, Bad Actors, Spare parts strategies, Root Cause Analysis, Critical Asset Identification, PM Optimization, and QA/QC. Instrument/Analyzer - Familiarity with the design, specification, installation, and configuration of a range of process instrumentation and analyzers, including pressure, temperature, flow, level, pH, conductivity, mass spectrometry, vibration systems, and control valves.

Nutrien Ltd

Reliability E&I Superintendent

At FMM, we provide our clients with high quality, high values maintenance and construction services while maintaining superior levels of communication, professionalism, integrity, and honesty with our staff, clients, suppliers, and professional associates. Our mission is to provide our clients with high quality, high value maintenance and construction services while maintaining superior levels of communication, professionalism, integrity and honesty with our staff, clients, suppliers, and professional associates.

Facilities Maintenance Management

Generator Technician

Bi-annual bonuses based on performance Paid training and access to online training videos Paid drive time (including overtime) 22 days paid off - 10 days of vacation, 12 company holidays Company vehicle provided On-the-job, hands-on training opportunities for Technicians, electrical and mechanical theory, and model-based training Sign-on bonus available Responsibilities Oversee assigned site branch Installation project, report progress to Installation Supervisor/Project Manager with the optimal goal to provide safe, quality and efficient service as well as maximize profit and maintain customer satisfaction. Ability to read and comprehend plans and blueprints as appropriate to trade regarding the installation of all cabling, communication loops, and components associated with the installation of energy management and refrigerant leak systems.

Panasonic has an unyielding commitment to the society in which we operate and for international growth. We offer gratifying careers to self-motivated and talented individuals with globally oriented backgrounds for helping us to set new standards in our field. We are actively recruiting the best and brightest candidates to join our worldwide team.

Panasonic Corporation of North America

Installation Foreman

Quality Observation Observe installations for general conformance, including hot and cold aisle containment, raised floor and pedestals (if applicable), cable tray and ladder rack, busway and tap-offs, PDUs and RPPs, cooling equipment and piping, grounding and bonding, fire detection and suppression, leak detection, and labeling. Field Presence, Observation, and Documentation Submit a daily field report to the Senior Project Manager by end of shift covering manpower by identifying any major issues or safety observations, logistics issues, design deviations, other pertinent information as deemed necessary with appropriate backup as necessary (i.e. photos).

Knowit Training

Site Superintendent, Owner’s Field Representative

Cross-Functional Collaboration: Serve as the primary point of contact for Assembly-related production coordination, collaborating with Production, Logistics, Engineering and Design, Project Management, Supply Chain, and other DTPS teams to support production execution and facilitate timely resolution of issues affecting Assembly. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.

Crest Industries LLC

DIS-TRAN Packaged Substations Transfer Portal - Assembly Supervisor

Cross-Functional Collaboration: Serve as the primary point of contact for Welding-related production coordination, collaborating with Assembly, the Buffer Coordinator, Quality, Logistics, Engineering and Design, Project Management, Supply Chain, and other DTPS teams to support production execution and coordinate issues affecting the Welding department. The Welding Supervisor maintains a strong and visible shop-floor presence, combining hands-on leadership and welding expertise with effective planning, coordination, and problem-solving to drive team performance and maintain production flow.

Electrical Manager Jobs in Louisiana

(USA) Master Electrician, Facility Services Walmart

Technician, Instrument & Controls - CPX CP Express Operations

Security Installation Technician III Allied Universal

Engineer - Protection Analyst Cleco Corporate Holdings LLC

Substation Technician Cleco Corporate Holdings LLC

Construction Project Administrator Jacobs Solutions Inc

Port Service Project Engineer APTIM

Senior Project Controls Specialist Qualus Power Services Corp

Construction Project Engineer EMCOR Group Inc

Sr Project Engineer Oil States International Inc

Project Engineer EMCOR Group Inc

Sr Project Engineer OIL STATES SKAGIT SMATCO, LLC

Senior Electronics/Avionic Systems Designer PHI Aviation

Reliability E&I Superintendent Nutrien Ltd

Generator Technician Facilities Maintenance Management

Installation Foreman Panasonic Corporation of North America

Site Superintendent, Owner’s Field Representative Knowit Training

DIS-TRAN Packaged Substations Transfer Portal - Assembly Supervisor Crest Industries LLC

Dis-Tran Packaged Substations Transfer Portal - Welding Supervisor Crest Industries

Assembly Supervisor Crest Industries

Similar Job Searches

Stand out to leading employers.