UNKNOWN

ADAPTED_NOW

Under general supervision, with wide latitude for planning or laying out working details, must be able to perform highly complex mechanical and electrical work involved in the inspection, repair, installation, test, adjustment and calibration of electrical equipment in generating stations and electrical substations, of meters and instruments and of automatic combustion control equipment and regulating devices in generating stations, and related equipment in shop or in place, and be qualified to do the following and related work as assigned: Inspect and maintain all types and classes of meters and instruments, control equipment and regulating devices and electrical equipment, such as electric motors, oil circuit breakers, air circuit breakers, generators, exciters, switchboards, rheostats, relays, voltage regulators, wiring, conduits, cables, lighting fixtures, fuses, transformers, lightning arrestors, busses, disconnecting switches, reactors, telephone equipment, electronic devices, electrical instruments, meters, storage batteries, motor-generators, etc. Conduct and assist in conducting routine and special tests on performance, capacity and efficiency of steam boilers, steam turbine generators, pumps, heat exchange equipment, condensers and other mechanical equipment in power plants, and on accuracy of meters, instruments and controls.

Entergy

Maintenance Operator II - IC&E Technician (Willis, Texas, United States)

FEED

Their responsibilities may include painting, snow/ice removal, gutter cleaning, replacing filters, working with trash compactor, plumbing, light bulb replacement, A/C maintenance, electrical, carpentry, and mechanical repair. A Maintenance Technician with Bell, performs a wide variety of maintenance, repair, groundskeeping, and other interior and exterior maintenance duties for the community under the supervision of the Maintenance Supervisor.

Bell Partners, Inc.

Maintenance Technician - Bell Gateway Village

ea_via_bold

Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). Work closely with engineering and production team members to ensure accurate, efficient and timely execution of required testing work.

Flex Ltd

Electrical Test Technician

Vertiv solves the most important challenges facing today''s data centers, communication networks and commercial and industrial facilities with a portfolio of power, cooling and IT infrastructure solutions and services that extend from the cloud to the edge of the network. Vertiv solves the most important challenges facing today's data centers, communication networks, and commercial and industrial facilities with a portfolio of power, cooling and IT infrastructure solutions and services that extend from the cloud to the edge of the network.

Vertiv Group Corp.

Field Service Technician/Electrical - San Antonio, TX

Even though the weight lifted may be only a negligible amount, a job should be rated Light Work: (1) when it requires walking or standing to a significant degree; or (2) when it requires sitting most of the time but entails pushing and/or pulling of arm or leg controls; and/or (3) when the job requires working at a production rate pace entailing the constant pushing and/or pulling of materials even though the weight of those materials is negligible. Assist in a wide range of responsibilities inclusive of job shadowing, preparing reports, analyzing data, learning about various operational, technical, and/or business-related compliance, regulatory, and/or technical components.

ONEOK

Instrumentation & Electrical Technician Intern

FULL_TIME

Working knowledge of plumbing, basic electrical, drywall/sheetrock repair, painting, carpentry, and general repairs . The ideal candidate is a well-rounded maintenance professional or handyman who takes pride in their work and can handle a wide variety of repair needs.

D1 Training - East Woodlands

Facilities Maintenance Technician Multi-Property

This role involves close collaboration with maintenance supervisors, electrical leads, and shift electricians to ensure reliable operations and strict adherence to safety protocols. The ideal candidate will bring hands-on experience in electrical repair, system calibration, and equipment support, with a strong commitment to teamwork and operational excellence.

Veterans Prime, Inc.

Electrical Technician

[AW]-iCims

Vertiv solves the most important challenges facing today's data centers, communication networks, and commercial and industrial facilities with a portfolio of power, cooling and IT infrastructure solutions and services that extend from the cloud to the edge of the network. Vertiv (NYSE: VRT) brings together hardware, software, analytics and ongoing services to enable its customers' vital applications to run continuously, perform optimally and grow with their business needs.

YEAR

Electrical Project Deployment Technician - UPS

OTHER

This position is responsible for supporting the overall maintenance operations of the property, including preventative, corrective, emergency, and cosmetic repairs, as well as preparing units for new residents. Perform general property maintenance, including: Basic plumbing and electrical repairs (non-licensed level).

Q10 Property Advisors

Lead Maintenance Technician

Betterteam

ERS-NETA Electrical Testing Technician - Dallas, TX

Special emphasis must be placed on health, safety, and the environment• Supports and encourages team effort between operations, engineering, and projects groups• Provides input and reviews the electrical and control specifications and work practices• Is responsible and accountable for electrical and control systems as defined in the Work Management Manual• Has the knowledge to apply and follow work permits through Permit To Work System (PTWS) as discussed in the Work Management Manual• Ensures the quality and timely completion of work scheduled by the Maintenance Program• Develops personal and team technical skills (for example, new regulations, equipment, methods, and others)• Attends and instructs (as needed) technical meetings, to keep instrument and electrical technicians informed of the latest specifications, codes, procedures, and technology• Develops and maintains open communications on electrical and control issues (for example, safe work practices, training, materials, and others) with co-workers• Supports work prioritization to maximize effectiveness and to complement the efforts of other work groups• Provides technical support to other Technicians for maintenance and troubleshooting on company''s instrument and electrical systems• Is able to generate Management of Change requests (MOCs) on electrical and control-related equipment and installation and can follow up with installation inspections consistent with Operations Integrity Management System (OIMS) Element 3• Constructs, monitors, and inspects new installations for their consistency with the mission and recommend upgrades as necessary• Acts as a stand-in for the Instrument and Electrical Lead position as needed. Associates degree and technical certifications required• Experience in maintaining electrical systems and Instruments and Controls in processing plant or offshore production plant• Is familiar with regulations applicable to the operations of oil and gas facilities• OIMS systems, related manuals, and procedures• Meets the safety, administrative, and technical training requirements associated with this position as documented in the company operations-approved training roadmap• Possesses the general competencies and Operations Integrity Critical competency requirements as documented and maintained in company Operations Training roadmap• Computing skills.

Danos Inc

Instrument and Electrical Technician III

Maintenance Technician - Bell Lancaster

Our fully operational 5GW solar module facility in Wilmer, Texas, can manufacture more than 20,000 modules every 24 hours. By the time you finish reading this paragraph, we will have produced two solar panels that will power American homes and fuel domestic AI.

T1 Energy

Each of our team members contributes to continued success and is dedicated to ensuring we surpass every expectation so that we can commit to providing opportunities for growth, rewards, and recognition. Over the years, Olympus has cultivated an employee culture that promotes collaboration where ideas are openly shared and employees are happy to be engaged.

HOUR

Olympus Property

Dual Site Maintenance Technician - The Brodie

greenhouse_via_bold

Troubleshoot and repair electrical systems (120V, 240V, 480V), motors, starters, relays, contactors, sensors, and controls. · Strong electrical and mechanical troubleshooting skills, including motor repair and replacement.

ProLogistix

Maintenance Supervisor

Appcast Custom Questions GTM

All such requests are to be recorded along with what action is taken If, for any reason maintenance requests are not completed, these are to be highlighted and handed over to Engineering Management Ensure that at the start of each shift you obtain assignments of the function list for the day via CMMS (Centralized Maintenance Management System) Continuously searching for new ideas and product improvements, guest and colleague's demands are met Display knowledge or ability to acquire knowledge in the following categories: fire life, health, safety, air conditioning, refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, laundry, spa, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, painting,minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area and/or general building Qualifications Aspire to our values of being passionate, strive for excellence, remain relevant, collaborate and act with honor and integrity Minimum 1-3 years hands-on experience working around mechanical, electrical, plumbing, kitchen, finishing High school or equivalent education required Ability to obtain and/or maintain any required licenses, certificates or permits Previous hotel experience, luxury or Forbes experience preferred Ability to work flexible schedules, including nights, weekends and holidays is required. Ensure all logs, record sheets, day to day events are correctly completed and kept up to date prior to completion of shift Ensure any work requests that may come from the hotel guests or senior management is responded to within a given time.

Landry's Inc

Maintenance Technician III

The primary focus of this role is conducting daily safety inspections on trampolines, foam pits, and specialized equipment to minimize guest injury risks. Job SummaryThe Maintenance Technician performs preventative care, routine servicing, and emergency repairs across the entire entertainment facility.

Altitude Trampoline Park

Maintenance Technician

Talent Acquisition

Control System fabrication, testing, and troubleshooting including PLC, DCS, HMI, Pneumatic & Hydraulic control panels, and Power Distribution Systems (MCC, UPS, Lighting). Skid Packaged Automation fabrication, testing, and troubleshooting including hydraulic power units and chemical injection systems.

VersaTech Automation Services

Lead Technician - Instrumentation & Electrical

The Maintenance III contributes directly to safe operations, production uptime, and regulatory compliance by performing preventive maintenance, troubleshooting, and completing complex mechanical, electrical, pneumatic, and hydraulic tasks. Founded in 1989 and headquartered in Dallas, Texas, PLA is a national supply chain solutions provider offering Pallet Management Services, 3PL Services, Reverse Logistics Services, and Freight Brokerage & Transportation Management Services.

<p>Propak is a proactive provider of leading-edge logistics, transportation and supply chain management solutions.</p>

Propak Logistics, Inc.

The responsibilities for a Floating Maintenance Technician with Bell Partners may include painting, snow/ice removal, gutter cleaning, replacing filters, working with trash compactor, plumbing, light bulb replacement, A/C maintenance, electrical, carpentry, and mechanical repair. A Floating Maintenance Technician performs a wide variety of maintenance, repair, grounds keeping, and other interior and exterior maintenance duties for communities under the supervision of the Maintenance Supervisor.

Electrical Maintenance Technician Jobs in Texas

Maintenance Operator II - IC&E Technician (Willis, Texas, United States) Entergy

Maintenance Technician - Bell Gateway Village Bell Partners, Inc.

Electrical Test Technician Flex Ltd

Field Service Technician/Electrical - San Antonio, TX Vertiv Group Corp.

Instrumentation & Electrical Technician Intern ONEOK

Facilities Maintenance Technician Multi-Property D1 Training - East Woodlands

Electrical Technician Veterans Prime, Inc.

Electrical Project Deployment Technician - UPS Vertiv Group Corp.

Lead Maintenance Technician Q10 Property Advisors

ERS-NETA Electrical Testing Technician - Dallas, TX Vertiv Group Corp.

Instrument and Electrical Technician III Danos Inc

Maintenance Technician - Bell Lancaster Bell Partners, Inc.

Electrical Technician T1 Energy

Dual Site Maintenance Technician - The Brodie Olympus Property

Maintenance Supervisor ProLogistix

Maintenance Technician III Landry's Inc

Maintenance Technician Altitude Trampoline Park

Lead Technician - Instrumentation & Electrical VersaTech Automation Services

Maintenance Technician Propak Logistics, Inc.

Floating Maintenance Technician Bell Partners Inc

Similar Job Searches

Stand out to leading employers.