UNKNOWN

FEED

YEAR

The inspector works closely with Production, Engineering, Electrical Quality Control, Paint Quality Control, and the QC Supervisor to identify defects early, prevent nonconforming work from advancing, verify rework, and ensure each e-house meets applicable acceptance requirements before transfer to the next production stage. The E-House Assembly Quality Control Inspector is responsible for verifying that modular electrical buildings, e-houses, and associated enclosures are assembled in accordance with approved engineering drawings, bills of materials (BOMs), customer specifications, installation requirements, and company quality procedures.

Panelmatic

E-House Assembly Quality Control Inspector

Workable

Inspect work only within your approved disciplines based on active ICC certifications and jurisdictional approvals - which may include building, electrical, mechanical, plumbing, energy, accessibility, and property maintenance. Assignments may include building, electrical, mechanical, plumbing, energy, accessibility, and property-maintenance inspections depending on your active certifications and jurisdictional approvals.

Inspected

ICC Inspector - Texas Market

The incumbent must possess mobility to work in and around city and private buildings, facilities, and construction sites, to operate a motor vehicle and drive on surface streets; strength, stamina, and mobility to perform light to medium physical work, to operate varied tools and equipment; vision to read printed materials and a computer screen; hearing and speech to communicate in person and over the telephone or radio. Minimum four (4) years trades experience (up to two years of college level coursework in construction management, engineering, architecture, or a similar field may substitute for this experience) plus two (2) years as a Combination Inspector II or similar municipal building inspector position.

HOUR

City of Garland

Combination Inspector III

Effectively communicates with the general public, other regulatory agencies, architects, engineers, contractors, and other City departments regarding projects or complaints. Employees are required to thoroughly document the conclusions of inspections and investigations in the Citys permit and complaint tracking software.

City of Baytown Texas

Building Services Inspector I/II/III/IV

FULL_TIME

The Construction Inspector shall coordinate project construction requirements with the Program Manager, 47th Contracting Squadron (47 CONS), and 47th Civil Engineer Squadron (47 CES) to ensure the proper execution of design, construction, and closeout activities for all non-dFSRM projects. • Must possess a current 2021 or 2024 National Commercial Inspector Certification from the International Code Council (ICC) under the B2 category or possess a minimum of eight (8) years of experience as a commercial construction superintendent on public, private, and/or Federal projects.

TRIGENT SOLUTIONS INC

Construction Inspector

Inspect incoming electrical components (relays, circuit breakers, CTs/PTs, terminal blocks, digital meters, and busbars) against Bills of Materials (BOM), purchase orders, and supplier data sheets. The Receiving Quality Inspector is responsible for verifying that all incoming raw materials, engineered components, sub-assemblies, meet engineering drawings and purchase order requirements.

Receiving Inspector

This role supports Lean Manufacturing quality principles by identifying abnormalities early, escalating quality concerns, and preventing nonconforming products from reaching customers. Wheeler Staffing Partners is seeking three experienced Quality Control Inspector II professionals for onsite opportunities in Garland, TX.

Wheeler Staffing Partners' (WSP) has outstanding client relationships providing consultants with access to some of the most desirable employment opportunities across the nation. Our experience, the solutions we provide, our business processes, and partnerships with our consultants and clients has made the company one of the most sought after placement firms for job seekers and companies of all sizes. WSP, provides all candidates with career opportunities, skill assessments, and interview consulting services and our clients with the candidates that meet their culture and skill set. From our Executive Retained Search Teams, Direct Hire and Contract Staffing Professionals to our RPO Service offerings, we create models to deliver a world-class service, with a sense of urgency and professionalism at the best price. Let us put our expertise and services to work for you!

Wheeler Staffing Partners

Quality Control Inspector, Garland II

HaleyMarketing

The ideal candidate will possess strong observational skills, excellent documentation practices, and the ability to work independently while maintaining professional interactions with homeowners, contractors, and stakeholders. We are seeking a reliable and detail-oriented TREC Inspector to conduct residential property inspections throughout the assigned coverage area.

STRUCTION SOLUTIONS

TREC Inspector - (Houston, Dallas, and Levelland, TX)

Gethired

Conducts inspections of structures and materials; reviews and interprets plans; identifies code compliance issues and violations; prepares and maintains reports; meets with contractors, builders and homeowners, and enforces local, state and federal codes, laws and regulations; responds to complaints received by the public; participates in the development of educational materials; and maintains applicable databases. (12) HOLIDAYS: New Years Day, Martin Luther King Jr Day, Memorial Day, Good Friday, Juneteenth, Independence Day, Labor Day, Fort Bend County Fair Day, Veterans Day, Thanksgiving Day, Friday following Thanksgiving Day, Christmas Eve, Christmas Day, and two (2) Personal Holidays.

City of Rosenberg

Building Inspector I

If you have experience performing inspections in a manufacturing environment, can interpret engineering drawings, and have a keen eye for detail, this is an excellent opportunity to join a quality-focused team with long-term growth potential. This position works closely with Production, Engineering, and Quality teams to maintain compliance, support continuous improvement efforts, and ensure only conforming products move through the manufacturing process.

Exegistics

Quality Inspector

Inspect and Hi-Pot testing of switchboard, MCC, Motor Control panel product produced on all lines, according to inspection work instructions and in accordance with applicable governmental requirements, to confirm proper function of all product and electrical components, identify any product non-conformances, and ensure it meets customer specification, safety and quality requirements. Verify that any revisions released to the production floor regarding functionality and customer specifications are incorporated into the product, all documentation reflects the current revision, and previous revisions of documents are not used / discarded.

It’s a lot easier to reach your potential when you are enthusiastic about what you do, so we believe your success begins with doing things you enjoy. We hire the best, most-talented people, and then strive to provide a work-environment where they can flourish.

EBSCO was founded by an entrepreneur who was passionate about honoring our commitments to our customers, rejecting the status quo, and seeking to continuously improve our team. We continue to operate that way today, with a passion for our people and our businesses succeeding together. EBSCO is a successful company because of the people who have worked here in the past and it will continue to thrive because of the innovative thinking, commitment, and drive from the people who work here today, and tomorrow.

EBSCO Industries Inc

QC Inspector

We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations.

Quality Control Inspector

ea_via_bold

ESSENTIAL FUNCTIONS: Inspect and Hi-Pot switchboard product produced on all lines, according to inspection work instructions and in accordance with applicable governmental requirements, to confirm proper function of switchboards and electrical components, identify any product non-conformances, and ensure it meets customer specification, safety and quality requirements. Verify that any revisions released to the production floor regarding functionality and customer specifications are incorporated into the product, all documentation reflects the current revision, and previous revisions of documents are not used / discarded.

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit <a href="http://www.eaton.com/Eaton/index.htm" target="_blank">Eaton.com.</a>

Eaton Corporation

Quality Inspector -Weekend Shift

Essential Functions: Inspect and Hi-Pot switchboard product produced on all lines, according to inspection work instructions and in accordance with applicable governmental requirements, to confirm proper function of switchboards and electrical components, identify any product non-conformances, and ensure it meets customer specification, safety and quality requirements. Verify that any revisions released to the production floor regarding functionality and customer specifications are incorporated into the product, all documentation reflects the current revision, and previous revisions of documents are not used / discarded.

Quality Inspector - 2Nd Shift

Minimum three (3) years of experience using Army specific software, to include: Sustainment Management Systems (SMS) programs (BUILDER, ROOFER, PAVER) and Installation Status Report (ISR), Preferred. Minimum five (5) years experience in commercial construction for the following building systems, or an equivalent military experience which would qualify an individual as an industry inspector of the below: Structural - Finishes, carpentry, architecture, etc.

Chenega Corporation is a premier Government and Commercial services provider to the security, healthcare, IT, environmental, military operations, construction, and tourism industries. Our integral business practices are rooted in the Alaska native culture of our shareholders. We are known for our exceptional employees, our fiscal strength, our creativity and innovation, and for providing excellent cost and performance value to our customers and business partners. Chenega returns all its profit to its native shareholders

Chenega Corporation

Building Inspector

Eaton Corporation Plc

Quality Inspector - 2nd Shift

Lead new product design, development and qualification of critical electrical power distribution equipment for AWS data centers, including medium voltage switchgear, medium voltage transformers, low voltage switchgear, generators, busduct, transfer switches, power distribution cabinets, and other electrical infrastructure. EPS is a global engineering team within AWS Data Center Engineering, responsible for the design, development, and continuous improvement of electrical power distribution products used across our rapidly expanding data center footprint.

At Amazon, we don’t wait for the next big idea to present itself. We envision the shape of impossible things and then we boldly make them reality. So far, this mindset has helped us achieve some incredible things. Let’s build new systems, challenge the status quo, and design the world we want to live in. We believe the work you do here will be the best work of your life. 
Wherever you are in your career exploration, Amazon likely has an opportunity for you. Our research scientists and engineers shape the future of natural language understanding with Alexa. Fulfillment center associates around the globe send customer orders from our warehouses to doorsteps. Product managers set feature requirements, strategy, and marketing messages for brand new customer experiences. And as we grow, we’ll add jobs that haven’t been invented yet. 
It’s Always Day 1 
At Amazon, it’s always “Day 1.” Now, what does this mean and why does it matter? It means that our approach remains the same as it was on Amazon’s very first day – to make smart, fast decisions, stay nimble, invent, and stay focused on delighting our customers. In our 2016 shareholder letter, Amazon CEO Jeff Bezos shared his thoughts on how to keep up a Day 1 company mindset. “Staying in Day 1 requires you to experiment patiently, accept failures, plant seeds, protect saplings, and double down when you see customer delight,” he wrote. “A customer-obsessed culture best creates the conditions where all of that can happen.” You can read the full letter <a href="https://hiring.amazon.com/why-amazon/culture#/">here</a> 
Our Leadership Principles 
Our Leadership Principles help us keep a Day 1 mentality. They aren’t just a pretty inspirational wall hanging. Amazonians use them, every day, whether they’re discussing ideas for new projects, deciding on the best solution for a customer’s problem, or interviewing candidates. To read through our Leadership Principles from Customer Obsession to Bias for Action, visit <a href="https://www.amazon.jobs/principles" target="_blank">https://www.amazon.jobs/principles</a>

Amazon.com Inc

Senior Product Design Electrical Engineer, Data Center Engineering - Electrical Products and Services (DCE-EPS)

SKILL AND KNOWLEDGE: Ability to apply a wide variety of complex inspection techniques to examine a variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.); that may include inspection of heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. (1) Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.).

ORGANIZATION
The Army, as one of the three military departments (Army, Navy and Air Force) reporting to the Department of Defense, is composed of two distinct and equally important components: the active component and the reserve components. The reserve components are the United States Army Reserve and the Army National Guard.


Regardless of component, the Army conducts both operational and institutional missions. The operational Army consists of numbered armies, corps, divisions, brigades, and battalions that conduct full spectrum operations around the world. The institutional Army supports the operational Army. Institutional organizations provide the infrastructure necessary to raise, train, equip, deploy, and ensure the readiness of all Army forces. The training base provides military skills and professional education to every Soldier—as well as members of sister services and allied forces. It also allows the Army to expand rapidly in time of war. The industrial base provides world-class equipment and logistics for the Army. Army installations provide the power-projection platforms required to deploy land forces promptly to support combatant commanders. Once those forces are deployed, the institutional Army provides the logistics needed to support them.


Without the institutional Army, the operational Army cannot function. Without the operational Army, the institutional Army has no purpose.

OUR PURPOSE REMAINS CONSTANT
To deploy, fight and win our nation’s wars by providing ready, prompt and sustained land dominance by Army forces across the full spectrum of conflict as part of the joint force.

The Army mission is vital to the Nation because we are the service capable of defeating enemy ground forces and indefinitely seizing and controlling those things an adversary prizes most – its land, its resources and its population.

United States Army

SURFACE MAINTENANCE MECHANIC INSPECTOR (T32)

NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid. IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets.

Electrical Inspector Jobs in Texas

E-House Assembly Quality Control Inspector Panelmatic

ICC Inspector - Texas Market Inspected

Combination Inspector III City of Garland

Building Services Inspector I/II/III/IV City of Baytown Texas

Construction Inspector TRIGENT SOLUTIONS INC

Receiving Inspector Panelmatic

Quality Control Inspector, Garland II Wheeler Staffing Partners

TREC Inspector - (Houston, Dallas, and Levelland, TX) STRUCTION SOLUTIONS

Building Inspector I City of Rosenberg

Quality Inspector Exegistics

QC Inspector EBSCO Industries Inc

Quality Control Inspector Panelmatic

Quality Inspector -Weekend Shift Eaton Corporation

Quality Inspector - 2Nd Shift Eaton Corporation

Building Inspector Chenega Corporation

Quality Inspector - 2nd Shift Eaton Corporation Plc

Senior Product Design Electrical Engineer, Data Center Engineering - Electrical Products and Services (DCE-EPS) Amazon.com Inc

SURFACE MAINTENANCE MECHANIC INSPECTOR (T32) United States Army

QA/QC Inspector level 2 IES Holdings Inc

QA/QC Inspector level 2 (Qualified Journeyman) IES Holdings Inc

Similar Job Searches

Stand out to leading employers.