Electrified Powertrain Torque Control Algorithm Engineer Stellantis NVElectrified Powertrain Torque Control Algorithm EngineerAuburn Hills, MIThe ideal candidate, who must be a strong team player and willing to work in a fast paced environment, will be involved in developing controls strategies related to strategic optimization of engine speed, gear, powertrain state, engine torque optimization, and tactical torque controls for drivability management, brake regeneration controls and hybrid shift execution strategies. The Powertrain Controls Engineer will work within a team of Powertrain controls, calibrations and integration engineers to develop electrified powertrain systems for current and next-generation electrified powertrains for Stellantis NV vehicles.
Engineer - Battery Thermal Simulation Our Next Energy (ONE)Engineer - Battery Thermal SimulationNovi, MIThe Battery Thermal Simulation Engineer will be responsible to develop, maintain, and conduct high-voltage (HV) Li-Ion battery pack-level thermal and CFD analysis, develop battery pack thermal models based on test results, and provide technical advice to internal and external customers for the design optimization of HV automotive Li-Ion battery packs. Develop and coordinate test and validation activities for verification and validation of battery cells, packs, modules, and thermal management systems, including test plan setup, test involvement, project scheduling, and result analyses.
BMS Requirements Lead Stellantis NVBMS Requirements LeadAuburn Hills, MIBMS Requirements Engineer will work with the Program management, Propulsion Controls System, Battery system architects, BMS SW product release engineers (SW DREs), BMS Controls, and functional safety and BMS Diagnostic teams to define new BMS functional requirements and solve BMS software application issues during product development and serial life phases. Job responsibilities include but not limited to: Develop and globally harmonize BMS functional requirements for electrified applications (BEV,PHEV,HEV,MHEV) - specific to high voltage, safety and diagnostic, and battery estimation control functions.
Software Test Engineer Akkodis Group AG.Software Test EngineerDearborn, AL$40–$42 / hourRequired Qualifications: Bachelor's degree in computer science, Computer Engineering, Electrical Engineering, Mechanical Engineering, Software Engineering, or a related technical field. The ideal candidate must have strong expertise in test execution, defect analysis, and root cause investigation while validating vehicle software, troubleshooting system issues, and supporting test automation initiatives.
Senior Chief Engineer \u2013 Transmission, Driveline \u0026 Gear Reducer Systems Stellantis NVSenior Chief Engineer \u2013 Transmission, Driveline \u0026 Gear Reducer SystemsAuburn Hills, MIThis job posting is for advanced positions in the Transmission, Driveline, and Gear Reducer Chief Engineering organizations with proven program management and execution experience in transmissions and drivelines. Manages Transmission and driveline system and interface DFMEA / DRBFM (team) reviews to ensure complete transparency and development of cohesive Design Controls leading to Robust DVP Actions.
Chiller Technician General MotorsChiller TechnicianMilford, MIThe Chiller Technician role is a good fit for a qualified individual who is interested in state-of-the-art technologies and testing methods, system-level integration, and related equipment in a laboratory setting. Serve as a contact to internal and external stakeholders for Engineering Maintenance and Technical support related activities, including day-to-day operations and future planning initiatives.
Low Voltage Electric Motors Technical Specialist General MotorsLow Voltage Electric Motors Technical SpecialistWarren, MIRole Overview: The Low Voltage (12/48V) Motor Technical Specialist (LVM TS) will drive innovation and commonization of electric motor solutions (non-propulsion) across subsystems, organizations, and suppliers to reduce cost, mass, and complexity while improving quality, fuel economy, EV range, and CO footprint. This work supports increasing industry demands for CO reduction, EV range improvements, optimized and efficient EP vehicle loads, and improved QRD performance, aligned with GM's vision of Zero Crashes, Zero Emissions, and Zero Congestion.
NewForensic Mechanical Engineer J.S. Held LLCForensic Mechanical EngineerDetroit, MI$130,000–$170,000 / yearOur professionals serve as trusted advisors to organizations facing high stakes matters demanding urgent attention, staunch integrity, proven experience, clear-cut analysis, and an understanding of both tangible and intangible assets. Held is a global consulting firm that combines technical, scientific, financial, and strategic expertise to advise clients seeking to realize value and mitigate risk.
Senior Vehicle Test Engineer Roush Enterprises IncSenior Vehicle Test EngineerRomeo, MIThe Vehicle Test Engineer Senior will support test procedure execution, for full vehicles, on test track or road surfaces, at the request of Program or Design Engineers, for attributes such as durability, strength, fatigue, or customer usage. To be considered a Senior Vehicle Test Engineer, you will need: Bachelor of Science in Mechanical Engineering, Mechanical Engineering Technology, Automotive Engineering, Automotive Engineering Technology, or equivalent.
PCS/EMS Integration Engineer, Ford Energy Ford Motor CoPCS/EMS Integration Engineer, Ford EnergyDearborn, MI$86,600–$144,900 / yearLeveraging Fords century of manufacturing excellence and world-class battery energy storage systems (BESS) technology, Ford Energy designs, manufactures, and services grid-scale and commercial DC battery energy storage systems (BESS). The Senior Engineer, PCS / EMS Integration will serve as Ford Energys hands-on Senior Engineer for the integration of Power Conversion Systems (PCS), Energy Management Systems (EMS), and Battery Management Systems (BMS).
Maintenance Engineer Property ManagementMaintenance EngineerTroy, MichiganAssist in checking and making routine repairs and assist on major repairs of all hotel equipment including small appliances, kitchen equipment, laundry equipment, boilers, pool equipment, HVAC, hand and power tools and general plumbing systems and fixtures such as pipelines, toilets and sinks, kitchen and laundry equipment. Assist in checking electrical systems such as air conditioning controls, television sets, lighting systems, and make minor repairs and/or replacement.
PLM Integration Engineer, Ford Energy Ford Motor CoPLM Integration Engineer, Ford EnergyDearborn, MI$86,600–$144,900 / yearLeveraging Ford's century of manufacturing excellence and world-class battery energy storage systems (BESS) technology, Ford Energy designs, manufactures, and services grid-scale and commercial DC battery energy storage systems (BESS). Execute PLM setup and governance tasks for Ford Energy BESS programs, supporting the configuration, workflow design, and maintenance of systems such as Siemens Teamcenter, SAP PLM, 3DEXPERIENCE, or similar platforms.
Advanced Emissions Calibration Engineer Artech LLCAdvanced Emissions Calibration EngineerDearborn, MIThe role is responsible for developing and demonstrating system-level capabilities to achieve future emissions targets for gasoline-powered Internal Combustion Engines (ICE), Hybrid (HEV), and Plug-in Hybrid (PHEV) applications. This position bridges the gap between virtual simulation and physical validation, leading the development of calibration strategies that balance stringent regulatory compliance with core vehicle attributes like fuel economy and drivability.
VMEC Senior Sub-System Lead Engineer (SSLE) - Chassis Controls General Motors CoVMEC Senior Sub-System Lead Engineer (SSLE) - Chassis ControlsMIDevelop block diagrams per Model Based Systems Engineering concepts: For SDV 2.0 based programs, develop models and block diagrams using Rhapsody per Model Based Systems Engineering principles. This dynamic role supports innovative technology development applicable to aspects of autonomous, electric, and traditional internal combustion applications in the Vehicle Motion Supervision product in Chassis Controls team.
Vehicle Technician StratAcuity Staffing Partners IncVehicle TechnicianAuburn Hills, MI$15–$19 / hourIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.
Power Electronics (Charging) - Design Release Engineer Stellantis NVPower Electronics (Charging) - Design Release EngineerAuburn Hills, MIPreferred Qualifications: • Masters Degree in Electrical Engineering • DRE and product launch experience • Power electroniclectrical models and simulation experience • Power electronics specifications expertise • Electric motor and powertrain controls experience • Printed Circuit Board (PCB) design and fabrication experience • Semi-conductor manufacturing knowledge. The Power Electronics Design and Release Engineer will be responsible for the activities related to Power Electronics components, Converters, Inverters, AC and DC charging devices, designs for Electrified Vehicle applications.
HVAC Engineer Able ServicesHVAC EngineerPlymouth, MIThe Journeyman HVAC Technician performs maintenance, repairs and installation of assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical and building systems in accordance with client expectations and requests. Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems.
Service Engineer Methods Machine Tools IncService EngineerWixom, MI$29.48–$44.59 / hourThis job description is designed to provide an overview of basic skills, experiences and education required to perform the job and is not designed to cover or contain a comprehensive listing of all activities, duties, or responsibilities required of the employee to perform the essential functions of the job. Job Summary: We are seeking an experienced Field Service Engineer to diagnose, repair, and maintain CNC milling and turning machines at customer facilities.
Power Electronics Design and Release Engineer Stellantis NVPower Electronics Design and Release EngineerAuburn Hills, MIThis highly motivated, self‑starting DRE will be responsible for the following activities: Collaborate with technical subject matter experts to develop cost‑effective, reliable Product Engineering Components (PECs) using advanced technologies, simulation tools, and test and evaluation equipment. The Power Electronics Design and Release Engineer (DRE) is responsible for the design, development, validation, and release of Power Electronics Components (PECs) - including converters, inverters, and AC/DC charging systems - for electrified vehicle applications.
Battery Cell Electrochemistry Analysis Engineer General MotorsBattery Cell Electrochemistry Analysis EngineerWarren, MIThe role combines electrochemical modeling, data science, battery design optimization, and cross-functional technical leadership to deliver models and tools that guide electrochemical, thermal, mechanical, electrical, and safety-related design decisions for electric vehicles. This position is a highly technical, interdisciplinary role focused on advancing the future of virtual engineering by developing, integrating, and deploying multi-physics battery cell and pack models.
Cost Study Integration Engineer, Psds General MotorsCost Study Integration Engineer, PsdsWarren, MIThe person in this role will work closely with PPCO, Harness DREs, Lead DREs, and cross-functional teams to develop accurate study costs, support cost walks, and help establish the correct initial program cost position. The ideal candidate will bring a strong background in wire harness, PSDS, and vehicle electrical systems, along with practical cost understanding, strong coordination skills, and the ability to drive technical work across multiple stakeholders.
Automation Controls Engineer DISHERAutomation Controls EngineerNovi, MIAutomation Controls Engineer – Novi, MI DISHER is currently partnering with a world leading automation company that specializes in groundbreaking technologies for flawlessly manufacturing millions of products. What will make you successful: Expert in RSLogix500, RSLogix5000, Studio5000, and FactoryTalk View Studio.
Field Application Engineer- Automotive Connectors MolexField Application Engineer- Automotive ConnectorsRochester Hills, MIFull time5+ years of experience in automotive engineering, field applications engineering, product engineering, technical sales, or related technical customer-facing roles. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance.
Electrical Hardware Engineer - Exterior Lighting General MotorsElectrical Hardware Engineer - Exterior LightingWarren, MILead root-cause analysis and resolution of electronic component and system-level issues across development, pre-production builds, launch, and current production. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers.
Chief Engineer III MedNational StaffingChief Engineer IIINew Hudson, MI$145,000–$196,000 / yearThis role serves as a technical leader and specialty authority, driving execution across complex engineering programs while aligning solutions to customer needs and strategic objectives. This is a high-impact leadership role with responsibility for both project delivery and team development, ideal for someone with deep defense expertise and a strong systems mindset.
Senior Hardware Engineer - ECU Safety Analysis General Motors CoSenior Hardware Engineer - ECU Safety AnalysisMilford, MIOur team is looking for a creative and highly energetic ECU Hardware Safety Analysis Engineer who can perform ECU circuit level safety analysis work and assist in developing our internal analysis approach and procedures for inhouse electronics designed ECUs. This circuit level electronics safety analysis will be in support of the overall System Safety Case development for ECUs within the Software Defined Vehicle (SDV) electrical architecture technologies that are critical in achieving GM's Vision of Zero Crashes, Zero Emissions, and Zero Congestion.
NewPropulsion Base Software Low Level Driver Engineer Stellantis NVPropulsion Base Software Low Level Driver EngineerAuburn Hills, MIThe Propulsion Base Software Low Level Driver Engineer is responsible for the design and development of embedded base software for EE/core and propulsion control modules, with a strong emphasis on low-level driver development and hardware-software integration. Design and develop drivers for power electronics interfaces, including HSD/LSD drivers, H-Bridge control, injector drivers, and gate driver IC interfaces.
NewPropulsion Software Design and Release Engineer Stellantis NVPropulsion Software Design and Release EngineerAuburn Hills, MIControl Modules supported may include Engine, BEV and HEV Supervisory controllers, High Voltage Battery controllers, DCDC Convertors, On Board Charging Modules, Motor Control Processors and other modules controlling propulsion system components. The Design Release Software Engineer are responsible for working with Tier one suppliers and Internal development teams (Base SW and Application SW developers as well as requirements team) for developing and integrating Embedded Software for advanced propulsion system components from initial design concept through full volume production.
Project Engineer - Hardware Electronics Leopold Kostal GmbH & Co KGProject Engineer - Hardware ElectronicsTroy, MIThis role supports the complete hardware development lifecycle, including requirements analysis, schematic design, circuit analysis, PCB layout oversight, testing, and troubleshooting. Experience with Door control modules and/or memory seat modules with specific focus on DC motor controls using PWM is preferred.
Senior Hardware Engineer Leopold Kostal GmbH & Co KGSenior Hardware EngineerTroy, MIThis role supports the complete hardware development lifecycle, including requirements analysis, schematic design, circuit analysis, PCB layout oversight, testing, and troubleshooting. Experience with Door control modules and/or memory seat modules with specific focus on DC motor controls using PWM is preferred.
Issue Management Engineer Lead Stellantis NVIssue Management Engineer LeadAuburn Hills, MIActing as a central point of contact, this role ensures that issues-whether identified during validation, HIL testing, PWB, or in-market performance (IOP, QFS, IQS, warranty)-are properly tracked and resolved. The Issue Management Engineer is responsible for leading the intake, documentation, coordination, and resolution of engineering-related issues across all vehicle families and development phases.
ECU White Box Stress Test Engineer Stellantis NVECU White Box Stress Test EngineerAuburn Hills, MITechnology is going to disrupt the automotive industry significantly in the next decade, and our organization is seeking high-potential candidates to transform the company with a focus on the customer experience. Actively engage with the design community, including component engineers and hardware engineers, in developing solutions for urgent product issues.
Functional Safety Engineer Stellantis NVFunctional Safety EngineerAuburn Hills, MIThe key deliverable is to launch a world leading safe and secure by design platform product that exceeds all current and future technology challenges in the drive to achieve truly software defined vehicle. Technology is going to disrupt the automotive industry significantly in the next decade, and our organization is seeking high potential candidates to transform the company with a focus on customer experience.
Senior Propulsion Controls Validation Engineer Stellantis NVSenior Propulsion Controls Validation EngineerAuburn Hills, MIAs a Senior Propulsion Controls Validation Engineer, you will execute validation strategies, identify software issues, and support root-cause analysis to ensure robust powertrain system performance. Join a fast-paced Vehicle & Propulsion Controls team focused on delivering high-quality, reliable software for electrified and internal combustion (ICE) powertrains.
Senior Engine Controls Engineer (Gasoline / Powertrain Controls) Stellantis NVSenior Engine Controls Engineer (Gasoline / Powertrain Controls)Auburn Hills, MIBasic Qualifications: Bachelor of Science in Mechanical or Electrical Engineering, or an equivalent engineering degree in the related field from an accredited university, with experience in controls / calibration of gasoline spark-ignition engines. We are seeking a Senior Engine Controls Engineer to develop, implement, and validate advanced control algorithms for gasoline engines.
Cae- Brake Systems Integration Engineer General MotorsCae- Brake Systems Integration EngineerWarren, MIIn the role you will work on brake system analysis and virtual test activities in support of leading-edge vehicle programs and innovative technology development including but not limited to: Develop high-fidelity virtual models for hydraulic and electric brake systems that couple physical system dynamics, actuator behavior, and embedded control-software execution. This position is highly technical and collaborative, involving partner teams throughout Virtual Design Development and Validation (VDDV), Vehicle Performance, Validation, Global Vehicle Hardware Engineering and Vehicle Software and Electronics Engineering.
Senior Software Engineer- Safety Design General MotorsSenior Software Engineer- Safety DesignMilford, MIAlternatively, the employer will accept a Master's degree in Electronic Engineering, Electrical Engineering, Mechanical Engineering, Computer Engineering, Computer Science, or related field of study and Four (4) years of experience as a Software Engineer, Associate Consultant, or related occupation. Four (4) years of experience with: C programming; ISO26262 Functional Safety software design; Automotive Safety Software design; JIRA; Github; Simulink Modeling and Auto Code Generation; CAN and LIN communications; Agile development practices; and ASPICE.
Transmission Line Engineer Stantec IncTransmission Line EngineerAnn Arbor, MI5 plus years of experience in the design of overhead and underground high voltage and extra high voltage transmission lines including route selection, line and structure spotting, structure design and analysis, and development of construction bid packages (underground transmission design experience is a plus). Primary Location: United States | UT | Salt Lake City Organization: 2242 E&R-US Northwest-Salt Lake City UT Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 05/06/2026 07:06:14 Req ID: 1006211.
Senior Transmission Line Engineer Stantec IncSenior Transmission Line EngineerAnn Arbor, MI8 plus years of experience in the design of overhead and underground high voltage and extra high voltage transmission lines including route selection, line and structure spotting, structure design and analysis, and development of construction bid packages (underground transmission design experience is a plus). Primary Location: United States | UT | Salt Lake City Organization: 2242 E&R-US Northwest-Salt Lake City UT Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 05/06/2026 07:06:45 Req ID: 1006217.
NewElectronics Assembly / SMT Process Engineer Danlaw, Inc.Electronics Assembly / SMT Process EngineerNovi, MIJob Summary: The Electronics Assembly / SMT Process Engineer is responsible for developing, optimizing, and sustaining Surface Mount Technology (SMT) processes to support high-quality and efficient PCB assembly. The ideal candidate will also provide technical leadership and training support across the production floor.
Software Quality Assurance Engineer General Motors CoSoftware Quality Assurance EngineerMIIn this role you will be using Agile methods, such as behavior driven development (BDD), to collaborate with a team of product owners, developers, and testers to ideate, create, and execute software behavior tests for the next generation of GM embedded controllers. Support the evaluation of software packages, including data reviews, simulation behavioral test, automation methods, and authoring/execution of comprehensive test plans to assess software and simulation products at different system levels.
Process Engineer Koch IncProcess EngineerCarleton, MIWhat You Will DoUtilizing SPC, statistical methods and data analysis to improve production processes including enhancements in yield, lowering costs and increasing manufacturing up timeAssisting in new product development and maximizing manufacturing capabilitiesLeading complex projects in a team-based environment taking advantage of your excellent relationship building and communication skillsUtilizing continuous improvement methodologies to facilitate process improvements and teach othersWorking with customers to resolve quality issues and implement corrective actions (up to 10% travel can be expected)Training production operators and working collaboratively with them to improve processesOpportunity to develop expertise in float processes and equipment to support troubleshooting and process improvementsWho You Are (Basic Qualifications)A Bachelor's degree in Material Science, Mechanical, Electrical, Chemical, Industrial, Manufacturing, Ceramic Engineering, or a related STEM degree plus 3 years'' of manufacturing experience OR in lieu of a Bachelor's degree, a minimum 3 years' experience as a Process Engineer in a manufacturing environmentExperience operating or supporting production processes in a manufacturing environmentAbility to utilize statistical methods and data analysis to improve production processesExperience working with customers to identify root causes of quality issues and implement corrective actionsWhat Will Put You AheadExperience driving process improvements by collaborating across multiple organizational levels and disciplinesDemonstrated leadership qualities and the ability to work autonomously on assigned projects3+ years as a process engineer in a manufacturing environmentExperience leading 8Ds to help root cause problems and put corrective actions in placeAt Koch companies, we are entrepreneurs. Who We AreAs a Koch company, Guardian Industries is a global company with a passion for innovation, creating value through a diverse portfolio of businesses that includes Guardian Glass, SRG Global, and other industry-leading companies.
Product Development Engineer (Optical|Metrology|Inspection) KLAProduct Development Engineer (Optical|Metrology|Inspection)Ann Arbor, MichiganThe engineer will work with other engineering disciplines (software, mechanical, electrical, optical, etc.) to drive complex instrument designs of subsystems for the next generation of KLA inspection tools! Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world’s leading technology providers to accelerate the delivery of tomorrow’s electronic devices.
Lead Software Controls Engineer - Transmission General Motors CoLead Software Controls Engineer - TransmissionMilford, MIIf you enjoy developing robust control algorithms, solving complex integration problems, and building high-quality embedded software in a disciplined engineering environment, we'd like to hear from you. The successful candidate will help shape the software approach for new transmission controls while partnering across the broader vehicle team to deliver robust, production-ready solutions.
Senior Process Controls Engineer General Motors CoSenior Process Controls EngineerWarren, MIFive (5) years of experience with: Programming Programmable Logic Controllers (PLCs) to control and automate manufacturing processes; Design intuitive Human-Machine Interfaces (HMIs) for operators to interact with automated systems; Electrical systems including wiring, circuit design, and troubleshooting; Control systems theory and experience in designing and implementing control algorithms; Diagnose and resolve issues with automation systems; and Communication protocols such as Ethernet/IP for seamless integration of automation components. Conduct machinery acceptance run-off and process statistical process control during the procurement of automation equipment and machinery including computer numerically controlled devices, industrial robotics, human-machine interfaces, motion sensing devices, programmable logic controllers, and vision systems.
Senior Defense Software Engineer Roush Enterprises IncSenior Defense Software EngineerTroy, MITo be considered as a Senior Defense Software Engineer, you will: Lead software engineering team to architect, design, develop, test, and deploy software and software systems, including embedded controllers, user interfaces, diagnostics, communications gateways, and data processing tools. Provide technical guidance on the development and improvement of software development processes, including code reviews, unit testing, system testing, test plan development, automated testing, project task tracking, team collaboration, continuous integration, bug and issue tracking.
Application Engineer II AVL Test Systems IncApplication Engineer IIPlymouth, MIThis position will support AVL’s testbed commissioning activities, including but not limited to engine, powertrain, emissions, battery, inverter, eMotor, and eAxle testing. Candidates must be able to take charge of projects once on-site and drive them to completion while working with a Project Manager to manage cost and schedule estimates.
Emissions/OBD Compliance Engineer II Hyundai America Technical Center, Inc.Emissions/OBD Compliance Engineer IISuperior Township, MICompliance Engineers are responsible for analyzing emissions and fuel economy results, reviewing OBD data, and other field-related items. Conduct regular alignment meetings with all stakeholders, including senior management, to ensure compliance issues are addressed in a timely manner.
Functional Safety Engineer GENTEX CorpFunctional Safety EngineerAuburn Hills, MIDeliver verified Functional Safety concepts and design specifications, which is accomplished by: Finding and applying the best method for any PS&S design engineering activity. Bachelor's degree in Cybersecurity, Software Engineering, Electrical Engineering, Computer Science, or related field.
Field Service Engineer Electro Optical SystemsField Service EngineerNovi, MichiganYou will manage all on-site installation, repair, maintenance, diagnosing technical problems and determining proper solutions in order to achieve outstanding customer satisfaction. We work globally networked and prefer to think outside the box – and we’re looking for people who want to shape the future with us.