April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
p/>Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. December 5, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
February 27, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
p>Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports and other complex buildings.
We are seeking an entry-level electrical engineer to assist with the design and development of embedded and FPGA-based systems used to control and process data within the optical drive. Folio Photonics is developing a new generation of optical storage systems combining advanced optics, electronics, and signal processing.
We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management.
Wheat Ridge, CO25 days ago
Technical knowledge: completing calculations and analyses; developing design details; preparing drawings, specifications, sketches, and cost estimates; selecting equipment; writing proposals and reports; and communicating with clients. Project work will include the design of power and controls for power plants, refineries, mine processing facilities, and other heavy industrial facilities, as well as water and wastewater treatment facilities for municipal clients.
p>Our rapidly growing Industrial Design Group, which includes process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Food & Beverage, Consumer Products, Heavy Manufacturing, Industrial Buildings Industrial Water and Utilities. At least 5 years' experience performing Electrical engineering design for Industrial facilities (which could include Chemical plants, Mining/Mineral Processing, Power, Water/Wastewater, Processing plants, Advanced manufacturing plants, data centers, EV Battery).
Tasks may include basic assistance with the research, design, concept development, and construction of transmission and distribution substations, power distribution, power regulation, renewable energy, as well as protection and control systems in a wide variety of contexts (utilities, transportation, building, and Federal, State, and local government projects). Perform routine engineering functions and provide entry-level technical assistance on various design requirements, equipment sizing and cabling, AC/DC panel design, and conduit and trenching design strategies to account for the safety and functionality of end-users, systems, and infrastructure.
Westminster, CO30+ days ago
p>Keywords: Electrical Engineer, PE License, MEP Consulting, Revit, AutoCAD, Engineering Jobs, Project Management, Power Distribution, Lighting Design, Building Codes, Construction Administration, AEC, Engineering Mentorship, Electrical Design. Project Stewardship: Provide comprehensive oversight of project timelines, managing everything from initial design activity to site surveys, building codes, and final punch lists.
strong>E-Verifywww.dhs.gov/E-VerifyFor information about right to work, click here (http://www.justice.gov/sites/default/files/crt/legacy/2013/08/13/FinalOSCPosterEN08_01_2013.pdf) for English orhere (http://www.justice.gov/crt/file/813271/download) for Spanish.. The engineer will provide power distribution designs, use associated electrical modeling software, and assist other engineers, project managers, and the facilities CAD team to ensure that the project electrical design and associated construction documentation conform to NLR's requirements and applicable building codes.
Lone Tree, CO30+ days ago
Our rapidly growing Industrial Design Group, which includes process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Food & Beverage, Consumer Products, Heavy Manufacturing, Industrial Buildings Industrial Water and Utilities. At least 5 years' experience performing Electrical engineering design for Industrial facilities (which could include Chemical plants, Mining/Mineral Processing, Power, Water/Wastewater, Processing plants, Advanced manufacturing plants, data centers, EV Battery).
p>Responsibilities As an Building Electrical Engineer you will have a wide range of responsibilities that include: - Developing building lighting, power and distribution designs, including minor telecom and security provisions, on various projects and building types that may include data centers, industrial buildings, nuclear buildings, water treatment buildings, hospital, pharmaceutical.
Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural and architectural disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery.
We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. AECOM is seeking an initiative-taking electrical engineer with an electrical engineering background to be based in the Denver, Colorado office to support mining projects in the planning and design phases.
We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.
Englewood, CO30+ days ago
Provide reports to the Project Manager about status of assignment(s) with respect to project milestones, schedule, budgets, delays and adverse problems, Assists with the development of manpower, man-hour, and labor cost requirements for a project and can monitor them to aid in evaluating budget limitations, Takes the lead on estimating tasks and performs material take-offs for a specific discipline, Ensure quality, quantity and completeness of the assigned engineering tasks, Adjusts project milestones schedules as required. a.)Have technical expertise to review and approve Electrical engineering calculations and drawings in the area of:power distribution equipment, power system short circuit, load flow, one-line diagrams, cable ampacity calculations, cable schedules, cable and raceway routing, schematics and wiring diagrams, grounding, lightning and lighting drawings, E-House layout drawings and heat loss calculations, procurement specifications, material requisitions and technical bid analysis.
Lone Tree, CO30+ days ago
p>Our rapidly growing Industrial Design Group, which includes process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Food & Beverage, Consumer Products, Heavy Manufacturing, Industrial Buildings Industrial Water and Utilities. At least 10+ years' experience performing Electrical engineering design for Industrial facilities (which could include Chemical plants, Mining/Mineral Processing, Power, Water/Wastewater, Processing plants, Advanced manufacturing plants, data centers, EV Battery).
The work spans the full product lifecycle: designing circuits, laying out boards, bringing up prototypes, and seeing them through to reliable, manufacturable products. This is a hands-on role for an engineer who has owned electrical design end-to-end, from concept through to production and the field, and wants to keep doing that work with the backing of a larger, well-resourced team.
Interface with cross-functional teams of engineers, planners, scientific, and construction professionals to execute project work on mid-level and/or multiple concurrent projects, including budgets, tracking hours and expenses, task completion, cost and quantities of materials/equipment/labor, technical calculations, permit applications, construction, compliance documentation, and regulatory and technical analysis memos. Tasks include the research, high level drafting, concept development, planning, and detailed design for construction of renewable energy generating facilities (wind, solar, BESS), power distribution, power regulation, as well as protection and control systems in a wide variety of contexts (utilities, transportation, building, and Federal, State, and local government projects).
Englewood, CO30+ days ago
li>Ability to perform complex engineering calculations, including load flow, short circuit, harmonics, equipment sizing, large motor starting, grounding, transient stability, electromagnetic transients, and insulation coordination. You will play a critical role in driving innovation, efficiency, and excellence across medium and large-sized projects while mentoring and guiding the electrical team.
Englewood, Colorado8 days ago
p>Electrical Engineer responsible for a variety of engineering tasks in the initial planning through final design for projects of advanced complexity under the supervision of a Supervising Electrical Engineer. The Engineer is responsible for initiating and developing engineering calculations, studies and drawings through completion in conformance with the requirements, applicable codes, and design criteria established by the project.
p>Electrical Engineer responsible for a variety of engineering tasks in the initial planning through final design for projects of advanced complexity under the supervision of a Supervising Electrical Engineer. The Engineer is responsible for initiating and developing engineering calculations, studies and drawings through completion in conformance with the requirements, applicable codes, and design criteria established by the project.
Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Your Job Responsibilities: Design electrical systems for data centers, aviation and commercial/industrial facilities including: Design power systems, including layout and circuiting of receptacles, miscellaneous equipment, mechanical equipment, and completion of panel schedules.
p>Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports and other complex buildings.
This role contributes to system architecture, supports product development, and collaborates across engineering, manufacturing, and service teams to ensure robust and scalable solutions. The employee will be required to wear all appropriate safety equipment including but not limited to eye protection, gloves, steel-toed shoes, lab coat, and around certain equipment, a hard hat.
You will work cross-functionally with teams in mechanical engineering, software development, quality assurance, new product development, and manufacturing to drive projects from concept through commercialization, with a focus on technology development. Description:As a Senior Electrical Engineer, you will serve as a technical leader and expert in designing, developing, and integrating complex electrical systems for company's Surgical Innovations products.
p>Design and layout of power plant site microgrids and power distribution with medium and low voltage systems switchgear and motor control centers computer modeling analysis of electrical systems convenience power lighting systems grounding and lightning protection systems. However employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information unless the disclosure is a in response to a formal complaint or charge b in furtherance of an investigation proceeding hearing or action including an investigation conducted by the employer or c consistent with the contractors legal duty to furnish information.
Greenwood Village, CO30+ days ago
This high-impact role is ideal for a proven leader with strong industry relationships, a track record of winning work, and the ability to build and scale a high-performing team quickly. Factors Influencing Salary Experience Level: Extensive experience in PV electrical engineering and a proven track record in business development can command higher salaries.
p>Benefits: • Comprehensive health coverage: Medical, Dental, Vision, Disability, and Life Insurance • Financial wellness: Health Savings Account (HSA) and Lifestyle Spending Account with employer contributions • Professional development: Support for continuing education and training opportunities • Work-life balance: Paid Time Off (PTO) and Holiday Pay • Work Schedule: Flexible 9/80 schedule-every other Friday off!
As a Senior Electrical Engineer and Team Lead in DEA's Energy Business Unit, you will guide the technical execution of utility-scale wind, solar, and Battery Energy Storage System (BESS) projects throughout the Midwest and western United States.
Required Experience: Proficiency in using various development tools and instruments such as oscilloscopes, meters, SPI bus analyzers, Pscpice, packet sniffers, emulators, JTAG debugging interfaces, logic analyzers, function generators, etc.
p>Seeking a Senior Electrical Engineer to design, develop, test, and maintain mixed-signal medical device electronics for Surgical Innovations products (Energy Generators, Lung Health, GYN). - Mixed-Signal Electrical Design
- System architecture, schematic design, PCB layout, component selection, design verification.
Accredited four (4) year degree or global equivalent in engineering field of study and five (5) years of work-related experience; a recognized professional certification or registration in the applicable field, if required; some locations may have additional or different qualifications in order to comply with local requirements. Assist in developing capital project programs for new equipment and major repairs; assist in the coordinate of manufacturing, construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, NFPA codes, UFC, and customer requirements.
Littleton, CO30+ days ago
The Principal Hardware Engineer partners closely with cross-functional engineering teams, program leadership, and customers to solve complex technical challenges, support program execution and business development efforts, and shape the long-term technology roadmap for the organization. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Equipment includes rotating machines such as generators and motors, solar photovoltaic panels, inverters, energy storage systems such as batteries, large power transformers, generator circuit breakers, isolated phase bus, duct, non-segregated phase bus, duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. As a Senior Lead Electrical Engineer, you will lead project teams to create world-class designs for both new and retrofit projects on a variety of projects.
Greenwood Village, CO30+ days ago
p>Key Responsibilities: • Lead design development and production of design documents, including drawings, narratives, and specifications • Provide technical guidance and perform reviews of fabrication and construction documents • Interface directly with clients by attending client meetings and making presentations to clients • Perform design reviews for compliance with electrical codes • Recommend, communicate, and coordinate design changes to clients and other disciplines • Perform project quality assurance and quality control, including independent technical reviews and interdisciplinary coordination reviews • Create and manage schedule and budget estimates for electrical design, fabrication, and construction aspects of projects • Problem solve, guide, and mentor staff • Assess employee performance • Participate in hiring process of new electrical staff.
The NST team specializes in the design of prototype, one-off custom equipment, gloveboxes, hot cells, specialty research equipment, and custom-designed remotely-operated mechanisms for handling radioactive and hazardous materials.
Englewood, CO30+ days ago
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractors legal duty to furnish information. Core deliverables include electrical system integration wiring diagrams, wire routing documentation (in collaboration with Mechanical Engineering), harness fabrication documentation, electrical load analyses, system safety artifacts, and test plans and reports.
We recognize that the expertise of our staff is our strongest asset, so we generously reward employees for successful performance and invest in their careers through training and the development of new skills and certifications. From pipelines to power plants, roadways to reservoirs, schoolyards to security solutions, clients look to TRC for breakthrough thinking backed by the innovative follow-through of an industry leader.
Our Technology, Commercial & Industrial Team has specialized capabilities focused on the latest needs for clients in a fast-growth technology-led arena of advanced manufacturing, and generative AI computing including gigafactories, bio/ag tech, data centers and distributed infrastructure. Develop protection and control design deliverables including protective relays, panel arrangements, one line/single line diagrams, three line diagrams, AC/DC schematics, relay panel wiring and equipment wiring within high voltage substation designs.
Every Switch team member contributes to a mission greater than themselves: to create the worlds most advanced digital infrastructure that powers the progress of humanity. Serve as technical authority for medium- and low-voltage systems, including UPS, switchgear, generators, grounding, and protection schemes.
Joining our Aviation team means an opportunity to explore your potential and apply your diverse skills to serve the large and small airports of the aviation industry as a trusted advisor. Our integrated teams translate experience into insight, turn challenges into opportunities, and build relationships that are as strong as the buildings and infrastructure we deliver together.
Denver, Colorado30+ days ago
You’ll work closely with a team of engineers and consultants to provide project direction, engineering solutions, and advice to clients—supporting project management, engineering analysis, design, and implementation oversight of electrical systems in buildings. You’ll support commercial interiors and tenant improvement projects while helping manage budgets, mentor team members, and collaborate across disciplines to meet project goals and client expectations.