Electronics Engineer V, Digital Circuit Design Lockheed Martin CorpElectronics Engineer V, Digital Circuit DesignLittleton, CO$139,600–$246,100 / yearKey activities you will accomplish in this role: • Reviewing design requirements • Creating block diagrams • Creating schematics • Creating circuit card assembly (CCA) • Purchasing all the parts on the BOM • Support manufacturing of the CCA • Perform test checkout of the CCA • Support program box integration. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington, or Washington DC is $139,600 - $246,100.
Electronics Engineer Iii, Digital Circuit Design Lockheed Martin CorporationElectronics Engineer Iii, Digital Circuit DesignLittleton, CO$97,100–$171,235 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $97,100 - $171,235. Location: This position does not support teleworking;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time.
Consulting Engineer - Structural Engineering & Analysis SI Solutions, LLCConsulting Engineer - Structural Engineering & AnalysisDenver, CO$104,240–$130,300 / yearHiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE’s Generally Authorized Destinations List: https://www.ecfr.gov/current/title-10/chapter-III/part-810/appendix-Appendix%20A%20to%20Part%20810 . Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110.
Systems Engineer III (Clearance Required) Sierra Space CorporationSystems Engineer III (Clearance Required)Louisville, CO$119,064–$163,713 / yearSpace Vehicle Integration: Plan and execute hardware and software integration activities for spacecraft buses, payloads, and subsystems; coordinate interface control documents (ICDs) and manage technical interfaces across vehicle elements. Ground Systems: Design and maintain ground system architectures including mission operations centers, ground data systems, ground communication networks, and interfaces with launch site infrastructure and tracking stations.
Manufacturing Engineer (Early Career Exceptional Talent) Boom Technology IncManufacturing Engineer (Early Career Exceptional Talent)Centennial, CO$70,000–$94,000 / yearYou''re the right person if: You''ve done something extraordinary early - built real hardware independently, led a competition team that actually competed, or done work in an internship that most engineers don''t see for years. At Boom, entry-level Manufacturing Engineers are handed real scope from day one - a section of the engine assembly, a machining process, a tooling problem that doesn''t have a solution yet - and held accountable for the outcome.
Sr Systems Engineer (Clearance Required) Sierra Space CorporationSr Systems Engineer (Clearance Required)Centennial, CO$143,700–$197,608.50 / yearSpace Vehicle Integration: Plan and execute hardware and software integration activities for spacecraft buses, payloads, and subsystems; coordinate interface control documents (ICDs) and manage technical interfaces across vehicle elements. Ground Systems: Design and maintain ground system architectures including mission operations centers, ground data systems, ground communication networks, and interfaces with launch site infrastructure and tracking stations.
Senior Optomechanical Engineer IonQ IncSenior Optomechanical EngineerBroomfield, CO$126,887–$166,127 / yearPlease note that in the absence of confirming you are a U.S. Person for export control and government contracts work purposes, IonQ may choose not to apply for a license or decline to use a license exception (if available) for you to access export-controlled technology that may require authorization, and similarly, you may not qualify for government contracts work that requires U.S. Persons, and IonQ may decline to proceed with your application on those bases alone. IonQ's newest generation of quantum computers, the IonQ Tempo, is the latest in a line of cutting-edge systems that have been helping customers and partners including Amazon Web Services, and AstraZeneca achieve 20x performance results and accelerate innovation in drug discovery, materials science, financial modeling, logistics, cybersecurity, and defense.
Electrical Engineer J.E. Dunn Construction Group IncElectrical EngineerDenver, CO$89,000–$111,000 / yearBase compensation for the Electrical Engineer role in Colorado is between $89,000 and $111,000, depending on experience, and may be more than this range for candidates with exceptional experience and a demonstrated history of successful performance. Our diverse teams around the country strive to enrich lives through inspired people and places every day, and we need inspired people like you to join us in our pursuit of building perfection.
Senior Optomechanical Engineer IONQSenior Optomechanical EngineerBroomfield, CO$126,887–$166,127 / yearPlease note that in the absence of confirming you are a U.S. Person for export control and government contracts work purposes, IonQ may choose not to apply for a license or decline to use a license exception (if available) for you to access export-controlled technology that may require authorization, and similarly, you may not qualify for government contracts work that requires U.S. Persons, and IonQ may decline to proceed with your application on those bases alone. IonQ's newest generation of quantum computers, the IonQ Tempo, is the latest in a line of cutting-edge systems that have been helping customers and partners including Amazon Web Services, and AstraZeneca achieve 20x performance results and accelerate innovation in drug discovery, materials science, financial modeling, logistics, cybersecurity, and defense.
Automation Controls Engineer Matrix Technologies, Inc.Automation Controls EngineerWestminster, CO$78,000–$95,000 / yearAs a member of the Automation team, this position includes assisting more senior engineers with preparing the project functional specification, project test specifications, developing PLC code, developing HMI graphics, executing a software Factory Acceptance Test, and performing on-site commissioning and start-up. Control & Automation Engineers interface with both external clients as well as other internal engineering disciplines within the Matrix organization to gather field data, prepare functional specifications, write PLC code, develop HMI graphics, perform client acceptance testing, and start-up new automation systems.
Principal DeltaV Automation Engineer Matrix Technologies, Inc.Principal DeltaV Automation EngineerWestminster, CORemote$150,000–$180,000 / yearUnlike many traditional engineering roles, this position provides the opportunity to influence technical strategy, build a growing DeltaV practice, and develop the next generation of automation engineers while remaining actively involved in challenging client projects. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; stoop, kneel, crouch; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk, and hear.
Civil Engineer Matrix Technologies, Inc.Civil EngineerWestminster, CORemote$81,000–$115,000 / yearLead designs for site grading, site layout, stormwater management, storm sewers, sanitary sewers, water/firewater piping, pavement, parking lots, private roads/drives, erosion and sediment control, railroad spurs and general site development for industrial and manufacturing facilities. Matrix is seeking a self-driven mid to senior-level experienced Civil Engineer to join our team in one of our 8 office locations (Maumee, OH; Cincinnati, OH; Westminster, CO; Indianapolis, IN; Peachtree City, GA; Overland Park, KS; Edina, MN; Raleigh, NC).
Noise & Vibration Simulation Engineer Apple IncNoise & Vibration Simulation EngineerCOSound is an essential and compelling facet of the customer experience - Apple has assembled a world-class Acoustics team that enables our customers to experience music with delight, communicate with clarity and appreciate our products without disturbance from noise. This person will also perform tests and/or work with test engineers on experimental/simulation correlation study and design solutions for related products to meet noise and vibration specifications.
Principal System Safety Engineer RTX CorpPrincipal System Safety EngineerAurora, COCollaborate with stakeholders across a range of engineering functions to identify and mitigate risks: Systems Engineering, Software Engineering, Firmware Engineering, Electrical Engineering, Hardware Engineering, Environmental Safety, & Health, Human Systems Interfaces, Test Engineering. This requires advanced application of MIL-STD 882E for System Safety (hardware, software, firmware, and personnel) for DoD Missile systems, typically obtained through advanced education combined with experience as well as project management experience and leadership.
NewBAS Controls Application Engineer CarrierBAS Controls Application EngineerDenver, COPreferred Qualifications:Associate's DegreeProficient in Engineering Design Suite (EDS) would be a plusMust have a strong knowledge of how an HVAC system worksMust have a strong work ethicMust be able to manage time so as to meet project schedule due dates for engineering deliverablesMust be able to work with a teamMust be self‑motivated and be able to complete work tasks with minimal supervisionMust have good and concise communication skillsMust be willing to learn new skills and knowledge, either by self‑paced training, virtual instructor training or be available to travel to receive in person training.#J-18808-Ljbffr. The controls engineer shall also have to be able to visit jobsites, attend design meetings (on‑site & virtual) and do job walks with our salesperson(s), project managers and/or field engineers as needed to give expertise guidance on potential or current projects.
NewField Engineer Clean ChemistryField EngineerLongmont, CO$80,000–$85,000 / yearJob Title: Field EngineerJob ID 27775462 • Location: Longmont, CO 80301 (preferred), Midland, TX, Houston, TX, Tuscaloosa, AL.About Clean ChemistryClean Chemistry was founded in 2012 with a mission to develop and commercialize high‑tech chemistry that displaces conventional products used for water treatment, sanitization, and bleaching, in alignment with today's sustainability goals. About The RoleThe Field Engineer will be based out of one of Clean Chemistry's strategically located operations facilities and will support product field trials, system installations, and operations in pulp & paper mills, food & beverage facilities, and other industrial plants in the USA and internationally.
NewSenior Electrical Engineer - Medium Voltage EVONASenior Electrical Engineer - Medium VoltageDenver, COSenior Electrical Engineer - Medium Voltage Our client is an exciting fast-paced Aerospace client looking for an experienced Medium Voltage Electrical Engineer to lead the design and commissioning of a large-scale industrial power generation system, taking ownership of the medium-voltage electrical infrastructure from concept through commissioning. Unlike conventional projects that rely on existing utility infrastructure, this role involves developing the electrical system architecture from first principles, solving complex challenges around voltage regulation, protection, synchronization, transient performance, and system resilience.
NewManufacturing Engineer I/II (2 Openings) LEAPManufacturing Engineer I/II (2 Openings)Broomfield, COThis role works directly with technicians, designers, and test engineers to ensure flight hardware is built safely, efficiently, and in accordance with quality and configuration requirements. The Manufacturing Engineer develops and improves the processes, tooling, documentation, and production systems required to build LEAP's Bullfrog and Bighorn launch vehicles.
Project Engineer- Hardware Delivery InfleqtionProject Engineer- Hardware DeliveryLouisville, COInfleqtion is seeking a Project Engineer to drive end-to-end hardware delivery for the QGG Pathfinder program, from product-tree and BOM maturity through procurement, supplier recovery, EEE parts flowdown, kitting, and handoff to Assembly, Integration, and Test (AI&T). The QGG Pathfinder program brings together atomic physics, aerospace hardware, electronics, software, supply chain, and mission assurance to mature a flight-relevant quantum gravity gradiometer payload.
NewProcess Engineer nLIGHT IncProcess EngineerLongmont, CO$120,000–$170,000 / yearLocated in Longmont, Colorado, nLIGHT-DEFENSE Systems, Inc. is a vertically integrated business that leverages internal capabilities - from semiconductor device through target identification - to develop systems that are both high-performance and cost-effective. Responsibilities: Develop scalable manufacturing processes and documentation, working directly with design teams to ensure high-performance systems are optimized for repeatable builds.
Senior Productization Engineer InfleqtionSenior Productization EngineerLouisville, CO$155,000–$170,000 / yearThe Senior Productization Engineer owns the technical implementation path for turning architected product intent, custom development opportunities, prototypes, and improvement campaigns into buildable, testable, manufacturable, and supportable offerings within the vacuum cell technologies (VCT) portfolio. The Senior Productization Engineer translates product concepts and requirements into executable technical work packages, integration and verification plans, technical risk retirement plans, and production-readiness deliverables.
NewProcess Engineer nLIGHTProcess EngineerLongmont, CO$120,000–$170,000 / yearLocated in Longmont, Colorado, nLIGHT-DEFENSE Systems, Inc. is a vertically integrated business that leverages internal capabilities - from semiconductor device through target identification - to develop systems that are both high-performance and cost-effective. Responsibilities: Develop scalable manufacturing processes and documentation, working directly with design teams to ensure high-performance systems are optimized for repeatable builds.
Building Design Manager Kiewit CorpBuilding Design ManagerLone Tree, CO$132,000–$138,000 / yearMinimum of 10+ years of relevant design/PM experience, performing functions as detailed above, with at least 7 years or more in building design and 3 years or more of relevant building project management experience leading a team (or a combination of those years in design plus management), where you have been the central point of contact for coordination of engineering, construction, and vendors. Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural and architectural disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery.
Principal Electrical Engineer LeoLabsPrincipal Electrical EngineerDenver, ColoradoThis is a hands-on technical leadership role for an experienced engineer who enjoys solving difficult problems, mentoring other engineers, and building reliable hardware that performs in demanding environments. As orbital activity accelerates and threats grow more complex, LeoLabs is a trusted partner for Space Domain Awareness, Space Traffic Management, and Satellite Operations for top-tier space operators and allied defense organizations.
Spacecraft Operations Engineer I/Ii Rocket Lab USASpacecraft Operations Engineer I/IiLittleton, CO$82,000–$118,000 / yearImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
NewFEA Stress Analysis Engineer SI Solutions, LLCFEA Stress Analysis EngineerDenver, CO$100,560–$168,240 / yearHiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE’s Generally Authorized Destinations List: https://www.ecfr.gov/current/title-10/chapter-III/part-810/appendix-Appendix%20A%20to%20Part%20810 . Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110.
ASIC/FPGA Design Engineer IV, TS/SCI Clearance Lockheed Martin CorpASIC/FPGA Design Engineer IV, TS/SCI ClearanceLittleton, CO$123,500–$217,695 / yearJoin Our Team as an ASIC & FPGA Engineer where you will support over 50 different programs and research and development (R&D) efforts, affecting technology across military space, civil space, commercial space, missiles, missile defense platforms, satellite surveillance platforms, deep space exploration, and manned flight missions. • Proactively monitor and manage team member workloads, tracking progress against assigned tasks and labor capacity, while collaborating with project engineers and managers as needed to ensure clear communication regarding the teams execution.
Asic/Fpga Design Engineer IV, Ts/Sci Clearance Lockheed Martin CorporationAsic/Fpga Design Engineer IV, Ts/Sci ClearanceBoulder, CO$123,500–$217,695 / yearDescription:Join Our Team as an ASIC & FPGA Engineer where you will support over 50 different programs and research and development (R&D) efforts, affecting technology across military space, civil space, commercial space, missiles, missile defense platforms, satellite surveillance platforms, deep space exploration, and manned flight missions. Proactively monitor and manage team member workloads, tracking progress against assigned tasks and labor capacity, while collaborating with project engineers and managers as needed to ensure clear communication regarding the teams execution.
Contractor - Electrical Design Engineer (will consider all senior levels) Redwire CorpContractor - Electrical Design Engineer (will consider all senior levels)Littleton, CO$55–$95 / hourExperience with analog circuit design, including isolated and non-isolated switched-mode power supply (SMPS) using discrete components; common and differential mode power filtering; active filter and amplifier design; high-side FET drives with monolithic or discrete solutions; and GaN FET experience. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Process Engineer II Antech Diagnostics IncProcess Engineer IILongmont, CO$84,000–$105,000 / yearOur products and services span 90+ reference laboratories around the globe; in-house diagnostic laboratory instruments and consumables, including rapid assay diagnostic products and digital cytology services; local and cloud-based data services; practice information management software and related software and support; veterinary imaging and technology; veterinary professional education and training; and board-certified specialist support services. Any resumes, curriculum vitae, and other unsolicited assistance from search firms that do not have a written search agreement or position-specific requisition submitted to any Associate of Antech will be deemed the sole property of Antech and no fee will be paid in the event the candidate is hired by Antech.
Staff Electromechanical Engineer Northrop Grumman CorpStaff Electromechanical EngineerAurora, CO$177,000–$265,600 / yearApplied electrical, electronic and mechanical principles to components and systems, including assembly, analysis, and documentation of results; construction of developmental assemblies, sub-assemblies and components; and quality testing. Bachelor's degree in a STEM field with 12+ years of relevant experience, Master's degree in a STEM field with 10+ years of relevant experience, OR PhD in a STEM field with 8+ years of relevant experience required.
Build Engineer Boom Technology IncBuild EngineerCentennial, CO$133,875–$170,100 / yearAt Boom we are developing Symphony - the engine that will power Overture, the world's fastest airliner and Superpower, the natural gas turbine and revenue engine that fuels our endeavors while unblocking next-gen AI data centers. To conform to U.S. Government aerospace technology export regulations (ITAR and EAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Senior Automation Systems Engineer, NA Vantage Data Centers Management Co LLCSenior Automation Systems Engineer, NADenver, CODeveloping and operating across North America, EMEA and Asia Pacific, Vantage has evolved data center design in innovative ways to deliver dramatic gains in reliability, efficiency and sustainability in flexible environments that can scale as quickly as the market demands. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to handle, or feel objects; reach with hands and arms; climb stairs; balance; stoop or kneel; talk and hear.
Sr. Staff Electrical Engineer LeoLabs, Inc.Sr. Staff Electrical EngineerDenver, COAs orbital activity accelerates and threats grow more complex, LeoLabs is a trusted partner for Space Domain Awareness, Space Traffic Management, and Satellite Operations for top-tier space operators and allied defense organizations. You will own complex board-level hardware from concept through production, working across mixed-signal, power, timing, and control electronics to deliver reliable, high-performance systems.
Sr. Electrical Engineer nLIGHT IncSr. Electrical EngineerLongmont, CO$140,000–$180,000 / yearLocated in Longmont, Colorado, nLIGHT-DEFENSE Systems, Inc. is a vertically integrated business that leverages internal capabilities - from semiconductor device through target identification - to develop systems that are both high-performance and cost-effective. Your work will span architecture design, power distribution, EMI/EMC mitigation, grounding/bonding, and troubleshooting, all while collaborating with multidisciplinary teams to deliver tightly packaged, high-performance systems.
Sr. Principal Electromechanical Engineer Northrop Grumman CorpSr. Principal Electromechanical EngineerAurora, CO$142,200–$213,400 / yearApplied electrical, electronic and mechanical principles to components and systems, including assembly, analysis, and documentation of results; construction of developmental assemblies, sub-assemblies and components; and quality testing. Bachelor's degree in a STEM field with 8+ years of relevant experience, Master's degree in a STEM field with 6+ years of relevant experience, OR PhD in a STEM field with 4+ years of relevant experience required.
Senior Systems Engineer Anduril Industries IncSenior Systems EngineerBoulder, CO$143,000–$191,000 / yearYou will bridge the gap between design and manufacturing, lead rigorous testing campaigns, and help mature our hardware and software systems to achieve high Technology Readiness Levels (TRL) ahead of our upcoming Critical Design Review (CDR) and Manufacturing Readiness Review (MRR). Prepare for Major Milestones: Author technical documentation, define verification matrices, and lead systems-level preparation for upcoming Critical Design Reviews (CDR) and Manufacturing Readiness Reviews (MRR).
Senior Electrical Engineer Anduril Industries IncSenior Electrical EngineerBroomfield, CO$126,000–$167,000 / yearTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources.
NewStaff Optical Engineer Infleqtion IncStaff Optical EngineerLouisville, COWithin Infleqtion's Quantum Computing Product Group, the Hardware Engineering Team is seeking a Staff Optical Engineer to provide deep technical contribution and subsystem-level leadership in advanced optical systems for neutral-atom quantum computing. Designing and implementing (at a subsystem level) atom-resolved detection and feedback systems using state-of-the-art sensors such as SPAD/EMCCD/sCMOS cameras, and high-speed photodetectors, with consideration for scaling readout bandwidth, latency, and data throughput.
NewEngineer 3 - Injection Molding Terumo Blood and Cell TechnologiesEngineer 3 - Injection MoldingDenver, COMedical device knowledge of resin processing including Polyesters and PVC (semi rigid and rigid), Polycarbonate, ABS.Hands‑on injection molding set‑up and process development experience and knowledge of mold design and construction to a level of being able to carry out a mold design review and understand basic tooling functionality and methodology of manufacture (machining, EDM, polishing, texturing).Experience with mold maintenance including mold configurations without error. Target Pay Range$105,800.00 to $132,300.00 – Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market dataTarget Bonus on Base7.0%BenefitsWe provide competitive total reward offerings that consist of compensation, benefits, recognition, and a wealth of other well‑being, work‑life, and recognition programs.
NewElectrical Engineer - Low Voltage EVONAElectrical Engineer - Low VoltageDenver, COOur client are an exciting fast paced Aerospace client looking for an experienced Low Voltage Electrical Engineer to lead the design and commissioning of a clean-sheet industrial power generation platform designed for mission-critical infrastructure where reliable, high-density power is essential. Ideal BackgroundExperience designing and commissioning low-voltage electrical systems for industrial equipment, rotating machinery, power generation, or similar applications.
NewStaff Electrical Engineer EVONAStaff Electrical EngineerDenver, COYou'll work across power electronics, mixed‑signal design, high‑speed interfaces, board bring‑up, integration, testing, and system‑level architecture while collaborating closely with mechanical, software, systems, thermal, and avionics teams. We're looking for a Staff Electrical Hardware Engineer to lead the design and development of complex electrical hardware for lunar and spaceflight systems in a fast-paced startup environment.
Staff Systems Engineer - Quantum Gravity Gradiometer InfleqtionStaff Systems Engineer - Quantum Gravity GradiometerLouisville, CO$160,000–$180,000Author major systems engineering documents and assign technical sections to subject-matter experts as needed, including requirements documents, ICDs, architecture documents, CONOPs, verification plans, test plans, review packages, and customer deliverables. Own and manage interface control documentation (ICDs), including source-of-truth documentation, revision control, and coordination of interfaces across the sensor head, electronics/subcontractor, laser, laser electronics, command and telemetry, software, and customer teams.
Electrical Engineer nLIGHTElectrical EngineerLongmont, CO$100,000–$150,000 / yearLocated in Longmont, Colorado, nLIGHT-DEFENSE Systems, Inc. is a vertically integrated business that leverages internal capabilities - from semiconductor device through target identification - to develop systems that are both high-performance and cost-effective. You'll work alongside senior engineers, gaining hands-on experience in power distribution, cabling, and troubleshooting while learning best practices for military-grade systems.
Sr. Electrical Engineer nLIGHTSr. Electrical EngineerLongmont, CO$140,000–$180,000 / yearLocated in Longmont, Colorado, nLIGHT-DEFENSE Systems, Inc. is a vertically integrated business that leverages internal capabilities - from semiconductor device through target identification - to develop systems that are both high-performance and cost-effective. Your work will span architecture design, power distribution, EMI/EMC mitigation, grounding/bonding, and troubleshooting, all while collaborating with multidisciplinary teams to deliver tightly packaged, high-performance systems.
Senior Electrical Engineer Crusoe EnergySenior Electrical EngineerArvada, CO$142,000–$160,000 / yearWe're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved - people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. The ideal candidate possesses a Bachelor's degree in Electrical Engineering or a related discipline with at least 5 years of experience in a manufacturing, construction, or project environment and has a solid understanding of the NEC and low-voltage power distribution systems.
Sr Electrical Engineer Artech LLCSr Electrical EngineerLafayette, CO$55–$60 / hourSeeking a Senior Electrical Engineer to design, develop, test, and maintain mixed-signal medical device electronics for Surgical Innovations products (Energy Generators, Lung Health, GYN). Responsible for board-level design, regulatory compliance, verification, debugging, reliability, and product lifecycle support.
Design Engineer XE.COM INC.Design EngineerDenver, CO$100,000–$140,000 / yearYou''ll build the interfaces customers use to move money in production, bridging design and code: implementing screens and components with design judgment, raising the bar on craft (motion, micro-interactions, states, accessibility, and performance), and keeping the experience consistent with the design system across mobile and web. Use VibeCode and agentic coding tools (Copilot, Cursor, Claude Code, or equivalent) to go faster, then refine, refactor, and align to the design system, validating on real devices rather than trusting generated output.
Senior Hardware & Production Engineer PMAT Inc.Senior Hardware & Production EngineerCentennial, COResponsibilities: Lead transition of TEN hardware from development to the next generation, small form factor Ensure compliance with Design for Manufacturability (DFM), Design for Test (DFT), and Design for Reliability (DFR) principles for ruggedized edge systems Support design and integration of high-performance compute hardware (CPU/GPU systems, storage, networking, sensor interfaces) Develop production processes, test procedures, and acceptance criteria for deployed systems Troubleshoot hardware and system-level issues across lab, production, and fielded environments Perform root cause corrective action (RCCA) on failures identified during test or deployment Support environmental qualification (thermal, vibration, shock, EMI/EMC) for tactical deployments Manage configuration control, technical data packages (TDPs), and engineering change orders (ECOs) Collaborate with software, network, and ISR system teams to ensure hardware compatibility and performance Interface with DoD stakeholders, program offices, and operational users to support deployment readiness. Required Skills and Experience: 6-10+ years of experience in hardware engineering, production engineering, or systems integration Experience with ruggedized computing systems or deployed tactical hardware Strong understanding of embedded systems, networking hardware, and high-performance compute platforms Experience with electronics manufacturing (PCB assembly, system integration, box build) Hands-on troubleshooting experience with lab and field equipment Demonstrated ability to lead cross-functional engineering and production efforts Hardware-to-production transition for tactical systems Ruggedized system design & integration Production troubleshooting & RCCA Systems-level thinking (compute, network, sensors) Cross-functional leadership Data-driven manufacturing & reliability improvement.
Applications Engineer - HVAC Controls LONG Building Technologies IncApplications Engineer - HVAC ControlsLittleton, CO$33.65–$52.88 / hourAs an Applications Engineer, you will be primarily responsible for preparing submittals, creating estimates, and generating system installation prints for building automation projects based on plans, specifications, and/or existing site conditions. Bachelor''s degree in engineering (Mechanical or related field) OR 2+ years'' experience in in temperature controls engineering and design AND Associate degree in Engineering (Mechanical or related field).