May 6, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
p>The manufacturing automation development engineering team is looking for a highly motivated Senior Mechanical Design Engineer to concept design, build, and ramp custom automated manufacturing equipment for the Optimus Programs at Teslas world-class facilities. The Senior Mechanical Design Engineer works within a cross-functional organization to design, build, validate, and roll-out equipment to the manufacturing production lines.
Carson City, NV30+ days ago
li>Design ownership for a wide range of mechanical and plumbing systems including, but not limited to: industrial/non-potable water, HVAC systems (labs, offices, industrial plants), process heating / cooling systems humidifiers, dehumidifiers, abatement systems (dust collectors, scrubbers), cooling towers, fans/pumps, plumbing, etc. Working knowledge of designing the following equipment types: condenser fluid heat rejection systems, chillers, boilers, air handling units, air and water source heat pumps, dust collectors, humidifiers, dehumidifiers, fans, and pumps.
Design and develop structural components, system requirements and specifications to achieve best-in-class structural, NVH and crash performance from conceptualization to mass production. Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire: Medical plans > plan options with $0 payroll deduction.
ul>As pack sub-team lead, you'll take full responsibility for one of the major Semi battery subsystems, and work closely with the other subsystems (module, ancillaries, structures, electronics, firmware, etc) to design, validate, and land ongoing improvements to the existing Semi battery design, as well as any potential future battery iterations and variants. Technical ownership of the pack sub-system, involving requirements definition, oversight of all 3d part design, integration with other battery subsystems, coordination with teams across Tesla (Test, Manufacturing, Quality, NPI, Supply Chain, etc), design and release documentation, and design support for all builds and test efforts.
Reporting to the Engineering Manager, the Mechanical Engineer will design, analyze, and lead development of complex mechanical systems and equipment, acting as a technical lead to support project execution, engineering excellence, and team development. Our 1500+ employees are strategically located to provide our customers with the highest level of customer service and support from our program management, sales, engineering, and executive management teams.
As a Mechanical Design Engineer, you will play a pivotal role in designing and developing a diverse range of products, from camera mounts to cellular and electronic mounts, primarily used in vehicles. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
From software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for Google Cloud, Google Global Networking, Data Center operations, systems research, and much more. We"re the driving team behind Google"s groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future.
li>Design experience with equipment including: cooling towers, chillers, heat recovery chillers, gas fired and electric water boilers, packaged and custom HVAC units, air-source & water-source heat pumps, combustible & non-combustible dust collectors, dehumidifiers, fans, pumps, thermal oxidizers, dry and wet scrubbers, heat exchangers (shell/tube, plate/frame, brazed fin), control valves and associated instrumentation. Design experience with systems including: variable exhaust and supply, combustible dust collection, air to air, air to water and water to water heat recovery, VOC abatement, smoke removal, hazardous, general and process exhaust, DOAS, ventilation and general HVAC.
From software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for Google Cloud, Google Global Networking, Data Center operations, systems research, and much more. Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Reno, NV, USA; Atlanta, GA, USA; Austin, TX, USA; Kirkland, WA, USA; Reston, VA, USA.Minimum qualifications: Bachelor's degree in Mechanical or Industrial Engineering, a related discipline, or equivalent practical experience.
As a Mechanical Engineer within the Data Center Technology Systems—a multidisciplinary consortium of engineers and architects dedicated to pioneering next-generation data centers—you will assume a pivotal role in the development, analysis, and optimization of the mechanical cooling infrastructure. Experience in custom mechanical equipment design, specifically data center server hall infrastructure cooling components and adiabatic cooling systems and in thermal analysis and data center cooling systems.
Carson City, NV30+ days ago
The engineer is expected to operate with a high degree of independence, serving as Electrical Engineer of Record on assigned projects while coordinating across multiple disciplines to deliver code-compliant, construction-ready packages on schedule and within budget. This position requires a licensed Professional Engineer who is not only highly skilled at performing complex engineering calculations but also motivated, detail-oriented, and capable of communicating effectively at all levels - from field teams to executive stakeholders.
li>Exposure to a wide variety of test systems, production machinery, industrial sensors, actuators, and equipment (pogo-pins, pressure transducers, temperature controllers, current meters, etc.). This team designs and builds robust data-driven test systems for Teslas power electronics used in vehicles, energy storage, charging solutions, and humanoid robots.
Carson City, NV30+ days ago
This senior role leads manufacturing focused product engineering across the full lifecycle-driving value engineering, executing meticulous mechanical design with deep materials knowledge, and owning new product development from concept through launch. The engineer partners closely with Operations, Quality, Supply Chain, and Product Management to improve manufacturability, reliability, and cost while supporting day to day build and test activities on the shop floor.
b>JOB DESCRIPTION- Provides comprehensive civil/structural engineering design services for substation and/or transmission facilities, and to ensure that these facilities are constructed on schedule and within committed resource allocations.
- Provides civil engineering expertise to develop substation/civil plans for sitework including grading, off-site improvements, drainage facilities, fencing and block walls, and landscaping.
As a Senior Roadway Design Engineer, you will be involved in projects with our Transportation Team and be part of a growing company focused on meeting our clients' needs, while also solving their problems. Knowledge and experience with Bentley ProjectWise, MicroStation, InRoads, OpenRoads, AutoCAD Civil 3D, and other applicable software common to the field of transportation engineering.
ul>Has a strong understanding of basic design specifications for additive manufacturing, can perform complex mechanical assembly tasks, understands manufacturing tasks for carbon composites, can perform complex machining tasks, understands basic molding and casting tasks, and is able to complete complex manufacturing planning tasks. To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120–130) and the Export Administration Regulations (EAR) (15 CFR Parts 730–774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. § 1324b(a)(3).
As a Senior Roadway Design Engineer, you will be involved in projects with our Transportation Team and be part of a growing company focused on meeting our clients’ needs, while also solving their problems. Knowledge and experience with Bentley ProjectWise, MicroStation, InRoads, OpenRoads, AutoCAD Civil 3D, and other applicable software common to the field of transportation engineering.
Carson City, NV30+ days ago
p>Redwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition. Interface with utilities and ISO/RTOs to support interconnection studies/submittals, permitting, and compliance for new renewable and BESS projects.
p>Bachelor's Degree in Civil or Geological Engineering 14+ years of relevant (post-degree) experience working in a consulting engineering or mining industry environment Engineer license required (multi-state preferred) Demonstrated experience working on projects related to tailings management and heap leach facility design in the mining industry, and experience in commonly used software packages Advanced proficiency with making technical computations and calculations involving the application of engineering principles, understanding plans and specifications and making factual comparisons to the appropriate regulations. Sound knowledge in soil mechanics and geotechnical engineering Project management skills commensurate with years of experience Demonstrated client liaison and business development skills Strong technical writing skills, with the ability to think critically and problem solve Ability to effectively delegate work and lead project teams Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies.
p>Tesla is looking for an Electrical Engineer experienced in the design of complex manufacturing campuses who has a strong desire to be a part of a world class team focused on achieving amazing results. As a key contributor to our factory design group you will work with a multidisciplinary team to design and build manufacturing facilities and infrastructure support systems.
Whether your project is a low or high-rise office building, a shopping mall, hospital, semi-conductor fabrication facility or pharmaceutical manufacturing plant…ACCO can design, build, install, and maintain a mechanical system to meet your needs. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others.
p>NOTE: Depending on qualifications of applicants, this position may be filled at a lower level than that which it is posted, such as Senior Engineer - Design & Construction, Engineer II - Design & Construction, or Engineer I - Design & Construction.
Provides Utility Design Administrators with engineering support for new business and capital maintenance design functions.
p>Working under the direction of the VDC Manager, the VDC Engineer supports model management and coordination between field teams, stakeholders, and design partners throughout the construction data lifecycle—from construction through project turnover. This role develops and manages 2D, 3D, and 4D models to improve collaboration across teams, identify conflicts early, and help deliver projects more efficiently with reduced risk.
You will serve as a highly technical contributor on the team responsible for design, optimization, prototyping and validation of new ways to deliver components safely and efficiently throughout our supply chain and manufacturing processes. Tesla is seeking a highly motivated Mechanical Design Engineer to join our Vehicle Packaging team in developing world-class designs for use in high volume automation equipment.
Whether your project is a low or high-rise office building, a shopping mall, hospital, semi-conductor fabrication facility or pharmaceutical manufacturing plant…ACCO can design, build, install, and maintain a mechanical system to meet your needs. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others.
Whether your project is a low or high-rise office building, a shopping mall, hospital, semi-conductor fabrication facility or pharmaceutical manufacturing plant…ACCO can design, build, install, and maintain a mechanical system to meet your needs. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others.
li>Intermediate knowledge of mechanical engineering principles and systems, including pumps, pneumatics, fans, flow meters, air handling systems, industrial chilled water, heating, process piping, rotating equipment, mass and heat transfer. As a Facilities Mechanical Engineer, you will work closely with the design team, construction & commissioning team supporting projects from concept through design, installation, integration, ramp up, and long-term operations, sustainability & operations.
Join the Battery Sorting team at Redwood Materials, where we are building a world-class, state-of-the-art, ML-enabled sorting platform that integrates conveyors, diverter mechanisms, computer vision, and operator-assist systems to classify and route thousands of end-of-life batteries per hour across diverse chemistries and form factors. Our team partners closely with Controls, Software, and Production Engineering to solve tightly coupled electromechanical and AI-driven challenges as we scale the infrastructure driving the circular battery economy.
Responsibilities https://www.youtube.com/watch?v=0tMgKm_71qs (by clicking this link you are being referred to an external site that is not part of Panasonic) Meet the Recruiter: Princess Damato Job Title: Mechanical Engineer II Shift: Day Shift Job Summary: Do you want to join a team that's changing the world? Must possess engineering skills (process development/improvement, troubleshooting, data analysis, etc.) Strong teamwork skills at all levels of an organization, especially skilled at working with direct labor to understand challenges and work on developing optimal solutions using structured methods.
While performing duties of this job, you would occasionally be required to stand, walk, sit, reach with hands and arms, climb or balance, stoop or kneel, talk and hear (this includes being able to hear and talk on site based communication equipment), distinguish between various colors, be able to hear safety tones/notifications, and use fingers and hands to feel objects, tools, temperature or controls. Eichleay, Inc. is a dynamic organization with over 150 years of experience delivering integrated project management and engineering solutions across energy and chemicals, power generation, life sciences, mining, and food & beverage industries.
li>Thoroughly document assigned development tasks including defining specifications, evaluating risk, determining test procedures, defining acceptance criteria, communicating test results, and executing Engineering Change Orders. Qualifications: - Excellent communication skills (verbal, listening, and written), including the ability to interface effectively with other engineering disciplines, leaders, front line workers, and vendors.
At least 3 years of experience in the design of overhead High Voltage and Extra High Voltage transmission lines including route selection, line and structure spotting, structure design and analysis, and development of construction bid packages. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.
The data center industry is continually evolving, and this is an ideal opportunity for candidates who enjoy working on technically challenging projects that require cutting edge designs. - Develops basic system designs within own discipline under supervision of a Project Engineer or Senior Project Engineer; this includes the ability to offer solutions to general technical problems.
ul>Manage the creation of mechanical engineering deliverables for industrial EPC projects including equipment sizing calculations, equipment data sheets and specifications, equipment requisitions, equipment bid tabulations, mechanical component specification, pipe specifications, pipe code calculations, insulation specifications, coatings specifications, pipe stress calculations, reports, lists (mechanical equipment, line, instrument, tie point, service index, etc.), input into P&IDs, CAD Model, and piping deliverables. Proficiency in Microsoft Word, PowerPoint, Outlook, Teams, with Advanced skills in Excel.
Planate Management Group (PMG) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) headquartered in Alexandria, Virginia, and Orlando, Florida USA with a technical support center in South East Asia and East Africa, that provides program management and facilities engineering services worldwide. Work with the Project Manager (PM) and the Contracting Officer (CO) in procuring the best qualified Engineer/Architect to be the designer of record (DOR), within project cost and time parameters; and establish the need for additional consultant studies and services required during the planning and design phase to ensure quality design deliverables.
li>Manage and lead Infrastructure and Tool Install projects through conceptualization, feasibility, funding, design (30%/60%/90%/IFC), change management, and engineering services during construction. Redwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition.
li>Thoroughly document assigned development tasks including defining specifications, evaluating risk, determining test procedures, defining acceptance criteria, communicating test results, and executing Engineering Change Orders. - Excellent communication skills (verbal, listening, and written), including the ability to interface effectively with other engineering disciplines, leaders, front line workers, and vendors.
p>To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120–130) and the Export Administration Regulations (EAR) (15 CFR Parts 730–774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. § 1324b(a)(3). - Possesses basic financial knowledge, can lead small teams, understand operations research principles, understand complex procurement tasks, create simple proposals, and manage simple schedules.
p>To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120–130) and the Export Administration Regulations (EAR) (15 CFR Parts 730–774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. § 1324b(a)(3). - Possesses basic financial knowledge, can lead small teams, understand operations research principles, understands complex procurement tasks, create simple proposals, and manage simple schedules.
p>To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120–130) and the Export Administration Regulations (EAR) (15 CFR Parts 730–774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. § 1324b(a)(3). - The individual is a recognized authority in the field with extensive experience in testing environments, deep knowledge of test assembly techniques, and advanced statistical techniques, can design and oversee complex testing programs.
p>____. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.