April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Hudson, New Hampshire16 days ago
You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
A successful candidate will assist ASIC development through creating custom analog layouts, floor planning entire chips, high level problem solving, and executing tape outs. ¿ Perform or guide physical layout, including floor-planning, and simulate circuits using extracted parasitic, contribute to design-for-test development.
Andover, Massachusetts30+ days ago
Join a focused team of engineers bringing highly complex, dense, rugged and secure electronic packaging solutions to our nation’s warfighters and first responders. • Ability to work in a fast-paced engineering services group supporting multiple time zones within the US and internationally.
Please click here for the E-Verify Poster in English or Spanish. Experience with embedded command and control of mechanisms (e.g., shutters, motors, gimbals), embedded controllers (e.g., PIC, STM, TMS), serial communications (e.g., CAN, TCP/IP, RS422), and distributed messaging (TCP/UDP).
Please click here for the E-Verify Poster in English or Spanish. The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel on space applications.
Please click here for the E-Verify Poster in English or Spanish. - Bachelor’s degree in Computer Engineering, Computer Science, or related field with 9+ years of relevant experience; OR Graduate Degree with 7+ years of relevant experience; OR 13+ years of relevant experience in lieu of a degree.
Expertise with RF subsystems and hardware including antennas, transmitters, receivers, microwave components, low noise amplifiers, high power amplifiers, advanced electronic modules, amplifiers, mixers, switches, frequency generation circuits, and frequency conversion circuits is desired. Basic Minimum Requirements: • Bachelor of Science Degree in Electrical Engineering preferred or BS Degree in Science, Technology, Engineering, or Math (STEM) accepted plus a minimum of 5+ years of relevant professional engineering experience.
Woburn, Massachusetts30+ days ago
Client is focused on delivering National Defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Applicants are expected to be self-motivated, detail oriented and have a demonstrated ability to effectively communicate with all levels of management and individual contributors on the program team through strong written and verbal communication skills.
Please click here for the E-Verify Poster in English or Spanish. - Bachelor’s degree in Computer Engineering, Computer Science, or related field with 4+ years of relevant experience; OR Graduate Degree with 2+ years of relevant experience; OR 8+ years of relevant experience in lieu of a degree.
April 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Please click here for the E-Verify Poster in English or Spanish. The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel.
Working closely with cross-functional teams including Engineering, Production, Quality, Supply Chain and Operations, you will lead process improvement initiatives, support engineering change implementation and contribute to the successful execution of strategic manufacturing projects. As a Manufacturing Engineering Specialist at Shred-Tech, you will play a key role in optimizing manufacturing operations, supporting new product introductions, and driving continuous improvement initiatives across the organization.
Burlington, MA12 days ago
p>Requirements: Highly motivated individual with a proven track record (7+ years) of innovative work designing precision mechanisms and/or opto-mechanical assemblies.
An emerging leader – experience as a technical lead, project lead, and/or working directly with customers.
strong> Required Technical and Professional Expertise: - 6 + years’ experience customer service and support of Windows Operating systems in a global enterprise environment from both software and hardware troubleshooting standpoint.
- Monitor and analyse gaps building processes to rationalize, troubleshoot and escalate technical problems with endpoint management clients, client inventory, application deployments and security patching.
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Lead development and review of system security documentation including System Security Management Plans, Program Protection Plans, Security Risk Analyses, OPSEC Plans, and security CONOPS in accordance with DoDI 5000.02,
p style="line-height:normal;margin-bottom:0in">Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. The MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users.
p style="line-height:normal;margin-bottom:0in">The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools. Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries.
Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries. The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools.
p style="line-height:normal;margin-bottom:0in">Essential Job Functions: Assist in the development of security documentation including System Security Management Plans, Program Protection Plans, Security Risk Analyses, OPSEC Plans, and other required system security engineering artifacts.
Learn more about our benefits here:
DCS Corp Benefits.
div>The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools. Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries.
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
p style="line-height:normal;margin-bottom:0in">Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. The MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users.
p/>The AE candidate will need to develop a deep understanding of our clients' business, operations, and exposures to evaluate the nature, probability, and magnitude of loss potentials and build client-specific risk improvement strategies that clearly demonstrate FM's value-add. By aligning FM products and services to each client's unique needs and partnering with Account Managers to produce cohesive, client-facing deliverables, the AE will reinforce a tailored account strategy and the tangible value FM brings to each client's organization.
p style="line-height:normal;margin-bottom:0in">Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime, and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space.
The Aerospace Management Systems Division programs, develops, delivers, and sustains air traffic management, CNS/ATM avionics expertise, and weather sensing and forecast capabilities, enabling military, civil, allied, and Foreign Military Sales customers to achieve their mission. Develop and maintain system architectures, interface definitions, and Model-Based Systems Engineering (MBSE) artifacts supporting Air Traffic Control (ATC), Command & Control (C2), communications, networking, tactical data links, and radio systems.
p style="line-height:normal;margin-bottom:0in">Learn more about our benefits here: DCS Corp Benefits.
Assist in the development of security documentation including System Security Management Plans, Program Protection Plans, Security Risk Analyses, OPSEC Plans, and other required system security engineering artifacts.
The C2ISR Division provides worldwide life cycle support across the spectrum of the C2ISR capabilities based enterprise; including supply, distribution, materiel management, acquisition, system engineering and maintenance, financial planning and budgeting, security, flight test, and contracting functions. EPASS support is required to execute the major GNS programs in support of the C2ISR Division, to include: AF DCGS Network Infrastructure Transformation (NIT), Extended Tether Program (ETP), and Global Command and Control System – Air Force Infrastructure (GCCS-AF (I)).
ESSENTIAL DUTIES AND RESPONSIBILITIES: • In support of the pioneer status for the Wakefield Thermal Brand, develop targeted products for various market segments and introduce these new products into distribution sales channel, including the identification of new products, and expansion of existing products. SUMMARY: Reporting to the Director of Engineering, the Thermal Design Engineer will be a technical resource for both internal and external stakeholders as it relates to the design of our various, highly technical product offerings in the thermal design space.
Job Description: FM Approvals is an international leader in third-party testing and certification services.
Qualifications:
- MS or BS in Engineering, Electrical or Electro-Mechanical highly preferred + 2+ years of related experience.
li>Must possess a strong understanding of asset integrity principles in complex process environments, including the reliability and integrity of critical equipment such as steam and gas turbines, electrical generators, rotating equipment, boilers, and piping systems, along with electrical systems, and how these systems, including their associated control and protection elements, interact and impact one another. Critical to the role is the ability to influence key stakeholders so they become more resilient against hazards and exposures, ultimately developing into a trusted advisor through sustainable risk improvement, strong communication skills, engineering expertise, and business acumen.
p>L3Harris' Space and Airborne Systems seeks a Chief Engineer with expertise in electro-optical payloads, subsystems, and software for mid to large aperture national, civil, and commercial space systems. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. You will work closely with the technical lead, business development, client services and UX design teams to build intuitive and functional user interfaces.
Responsibilities include the timely production of precision components affecting prototyping, production runs and engineering deliverables, as well as routine equipment maintenance. Basic working knowledge of fixture and workholding design (custom jigs and fixtures preferable) at a fabrication level.
With approximately 400 employees and continued expansion planned, the business is investing heavily in data centre infrastructure and large enterprise customers, creating strong long-term growth opportunities. The client is a well-established and fast-growing manufacturer of metal components and custom-engineered parts serving OEM customers across multiple industrial sectors.
Job Type: Full Time (5days/weeks) onsiteLocation: Boston, MALong Term ContractJob OverviewThe Apple macOS Desktop Support L2 Engineer will provide comprehensive end-user support for corporate Mac devices. The role focuses on incident resolution, service requests, break-fix support, and ensuring service delivery in line with defined SLAs.
a href="https://www.fmapprovals.com/Certification-Services/Marks-and-Auditing" rel="nofollow noopener noreferrer" target="_blank">Audits include various manufacturers responsible for producing products for compliance with FM Approvals requirements. Job Description: FM Approvals is an international leader in third-party testing and certification services.
A growing precision manufacturing environment is seeking a skilled Senior Process Engineer with strong CNC programming expertise to support new product introduction, optimize production processes, and drive continuous improvement across machining operations. Create, implement, and troubleshoot CNC programs for new part start ups using MasterCAM, PartMaker, or similar platforms.
p>Reporting directly into the Engineering Manager, you will be responsible for:
Similar Job Searches
Systems Engineer Jobs in Boston, MADesign Engineer Jobs in Boston, MAProcess Engineer Jobs in Boston, MAApplications Engineer Jobs in Boston, MAService Engineer Jobs in Boston, MASolutions Engineer Jobs in Boston, MACustomer Engineer Jobs in Somerville, MACustomer Engineer Jobs in Waltham, MACustomer Engineer Jobs in Cambridge, MACustomer Engineer Jobs in Quincy, MA