April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Hudson, New Hampshire12 days ago
You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
A successful candidate will assist ASIC development through creating custom analog layouts, floor planning entire chips, high level problem solving, and executing tape outs. Āæ Perform or guide physical layout, including floor-planning, and simulate circuits using extracted parasitic, contribute to design-for-test development.
A successful candidate has strong experience with Azure Cloud services, is self-driven, enjoys learning new technologies, and is willing to stretch themselves to become a stronger engineer and mentor others around them to do the same. Developing effective cloud infrastructure, enforcing good architectural principles, providing technical oversight, and ensuring security best practices are implemented and followed.
Andover, Massachusetts30+ days ago
Join a focused team of engineers bringing highly complex, dense, rugged and secure electronic packaging solutions to our nationās warfighters and first responders. ā¢ Ability to work in a fast-paced engineering services group supporting multiple time zones within the US and internationally.
Woburn, Massachusetts30+ days ago
Client is focused on delivering National Defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Applicants are expected to be self-motivated, detail oriented and have a demonstrated ability to effectively communicate with all levels of management and individual contributors on the program team through strong written and verbal communication skills.
Expertise with RF subsystems and hardware including antennas, transmitters, receivers, microwave components, low noise amplifiers, high power amplifiers, advanced electronic modules, amplifiers, mixers, switches, frequency generation circuits, and frequency conversion circuits is desired. Basic Minimum Requirements: ā¢ Bachelor of Science Degree in Electrical Engineering preferred or BS Degree in Science, Technology, Engineering, or Math (STEM) accepted plus a minimum of 5+ years of relevant professional engineering experience.
p>Local Manufacturer of electronics products and is seeking an experienced Electronic & Software Engineer for the growing Engineering department. - Develop manufacturable designs including embedded software and qualification strategies to exhibit design meets customer requirements.
p>Requirements: Highly motivated individual with a proven track record (7+ years) of innovative work designing precision mechanisms and/or opto-mechanical assemblies.
An emerging leader ā experience as a technical lead, project lead, and/or working directly with customers.
p>Designs tooling to produce parts using CAD (Solid Works, Logo Press &/or CADKEY) to customer specifications under instruction to ascertain specifications and objectives, nature of technical problem, and possible solutions such as part redesign, substitution of material or parts, or rearrangement of parts and subassemblies. Collaborates with Tool Room, Maintenance, & Production to implement improvements for employee safety, production quality, and overall process effectiveness utilizing continuous improvement techniques.
a href="https://www.fmapprovals.com/Certification-Services/Marks-and-Auditing" rel="nofollow noopener noreferrer" target="_blank">Audits include various manufacturers responsible for producing products for compliance with FM Approvals requirements. Job Description: FM Approvals is an international leader in third-party testing and certification services.
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Lead development and review of system security documentation including System Security Management Plans, Program Protection Plans, Security Risk Analyses, OPSEC Plans, and security CONOPS in accordance with DoDI 5000.02,
p style="line-height:normal;margin-bottom:0in">Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. The MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users.
p style="line-height:normal;margin-bottom:0in">Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. C3BMās main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime, and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space.
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
The Aerospace Management Systems Division programs, develops, delivers, and sustains air traffic management, CNS/ATM avionics expertise, and weather sensing and forecast capabilities, enabling military, civil, allied, and Foreign Military Sales customers to achieve their mission. Develop and maintain system architectures, interface definitions, and Model-Based Systems Engineering (MBSE) artifacts supporting Air Traffic Control (ATC), Command & Control (C2), communications, networking, tactical data links, and radio systems.
The C2ISR Division provides worldwide life cycle support across the spectrum of the C2ISR capabilities based enterprise; including supply, distribution, materiel management, acquisition, system engineering and maintenance, financial planning and budgeting, security, flight test, and contracting functions. EPASS support is required to execute the major GNS programs in support of the C2ISR Division, to include: AF DCGS Network Infrastructure Transformation (NIT), Extended Tether Program (ETP), and Global Command and Control System ā Air Force Infrastructure (GCCS-AF (I)).
p style="line-height:normal;margin-bottom:0in">The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools. Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries.
div>The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools. Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries.
p style="line-height:normal;margin-bottom:0in">Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. The MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users.
Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries. The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools.
p>More information about the holding company and overall organization can be found at
Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. You will work closely with the technical lead, business development, client services and UX design teams to build intuitive and functional user interfaces.
Job Description: FM Approvals is an international leader in third-party testing and certification services.
Qualifications:
- MS or BS in Engineering, Electrical or Electro-Mechanical highly preferred + 2+ years of related experience.
p/>The AE candidate will need to develop a deep understanding of our clients' business, operations, and exposures to evaluate the nature, probability, and magnitude of loss potentials and build client-specific risk improvement strategies that clearly demonstrate FM's value-add. By aligning FM products and services to each client's unique needs and partnering with Account Managers to produce cohesive, client-facing deliverables, the AE will reinforce a tailored account strategy and the tangible value FM brings to each client's organization.
As a seed-stage B2B startup, weāre on a mission to help teams accelerate discovery, validate concepts faster and scale impact across the organization, and we believe customer obsession is our unfair advantage. This role is ideal for someone who enjoys engaging directly with customers, bringing structure to ambiguity, and translating technical capabilities into practical, businessāaligned solutions.
li>Must possess a strong understanding of asset integrity principles in complex process environments, including the reliability and integrity of critical equipment such as steam and gas turbines, electrical generators, rotating equipment, boilers, and piping systems, along with electrical systems, and how these systems, including their associated control and protection elements, interact and impact one another. Critical to the role is the ability to influence key stakeholders so they become more resilient against hazards and exposures, ultimately developing into a trusted advisor through sustainable risk improvement, strong communication skills, engineering expertise, and business acumen.
Responsibilities include the timely production of precision components affecting prototyping, production runs and engineering deliverables, as well as routine equipment maintenance. Basic working knowledge of fixture and workholding design (custom jigs and fixtures preferable) at a fabrication level.
Job Type: Full Time (5days/weeks) onsiteLocation: Boston, MALong Term ContractJob OverviewThe Apple macOS Desktop Support L2 Engineer will provide comprehensive end-user support for corporate Mac devices. The role focuses on incident resolution, service requests, break-fix support, and ensuring service delivery in line with defined SLAs.
A growing precision manufacturing environment is seeking a skilled Senior Process Engineer with strong CNC programming expertise to support new product introduction, optimize production processes, and drive continuous improvement across machining operations. Create, implement, and troubleshoot CNC programs for new part start ups using MasterCAM, PartMaker, or similar platforms.
The Manufacturing Process Engineer will partner closely with design engineers, scientists, technicians, and production teams to ensure new products are designed for manufacturability and successfully transitioned into production. This individual will also play a key role in continuous improvement efforts, troubleshooting production issues, and supporting dayātoāday manufacturing operations.
Preferred experience includes: Hands-on with their operational stack-NinjaOne, CrowdStrike, Proofpoint, Barracuda Backup, and Azure Recovery Services Vault-or close equivalents. Strong automation and integration skills (PowerShell, Python, or equivalent), plus practical experience tying systems together via APIs and event-driven patterns.
p> FM Approvals is seeking a highly motiv ated business development advanced enginee r to support growth in the Hazardous Location, and Industrial Internet of Things ( IioT ) markets. Qualifications:
We are HCLTech, one of the fastest-growing large tech companies in the world and home to 218,000 people across 60 countries, supercharging progress through industry-leading capabilities centered around Digital, Engineering and Cloud. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries.
p/>Join the fun and follow us on social media to see what's happening at our company, and don't forget to connect with us on Lennar: Overview | LinkedIn<https://www.linkedin.com/company/lennar/> for the latest job opportunities.
Lennar is one of the nation's leading homebuilders, dedicated to making an impact and creating an extraordinary experience for their Homeowners, Communities, and Associates by building quality homes and providing exceptional customer service, giving back to the communities in which we work and live in, and fostering a culture of opportunity and growth for our Associates throughout their career.
SynergisticIT focuses on roles such as entry-level software programmers, Java full stack developers, Python/Java developers, Data Analysts, Data Engineers, Data Scientists, and Machine Learning Engineers. Why do Tech Companies not Hire recent Computer Science Graduates | https://www.synergisticit.com/why-tech-companies-dont-hire-recent-cs-graduates/.
Cambridge, MA30+ days ago
You will help prospective and existing customers and partners understand the power of Google Cloud, develop creative cloud solutions and architectures to solve business issues, engage in proofs-of-concepts, and troubleshoot any technical questions and roadblocks related to database migrations, data back ends and all aspects of the data life-cycle. Experience with developing data warehousing, data lakes, batch or real-time event processing, and ETL workflows solutions (Informatica, Talend, Alooma, SAP, Data Services) which could include architecture design, implementing, tuning, schema design, and query optimization of scalable and distributed systems.
li>Architect cross-pillar solutions, drive technical wins, and define initial delivery plans for customers; continue to lead the technical engagement in the solution phase. Preferred qualifications:
- Experience selling technical solutions in one or more of the following: infrastructure modernization, application modernization, data management, data analytics, cloud AI, networking, migrations, security.