UNKNOWN

FEED

Physical Demands: See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks. Mental Demands: Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools.

Fluor Corporation

FM - Technician - Multi Skill

ea_via_bold

The Maintenance Technician is to improve production through the design and use of: the electrical and mechanical equipment, Maintenance Department, and Contractors at SSAB Houston by analysis of technical data and ensuring installation and maintaining equipment in proper and safe working condition. Responsible for monitoring, troubleshooting, and repairing mechanical equipment on the CTL/Temper Line and Plasma/Oxy-Fuel Table to ensure optimal performance, operational efficiency, and minimal downtime.

SSAB AB

Maintenance Technician

linkup_via_bold

The Maintenance Equipment Technician is responsible for performing preventive maintenance, troubleshooting, and repairs on industrial facility equipment, mechanical systems, and machinery to ensure minimal downtime and optimal operational safety. Person," defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, or (iii) other protected individual, such as a refugee under 8 U.S.C. § 1157 or asylee under 8 U.S.C. § 1158; or 2) being eligible to obtain a timely export control license or license exception from the applicable U.S. federal agency.

Sanmina Corp

Maintenance Equipment Technician

OTHER

Execute hydro-static and pneumatic pressure testing using specialized test stands to verify seat leakage limits and body integrity. Assist warehouse operations when needed (receiving raw valves, operating forklifts, using jib cranes, and packaging finished assemblies for transport).

Openwork

Valve Technician - 1st Shift

Betterteam

For over 50 years, Stress Engineering Services has been the trusted authority when the stakes are highest, delivering independent, rigorous, and defensible engineering that empowers clients to move forward with confidence. You’ll work closely with engineers and technical experts to execute testing programs that involve: Setting up and performing mechanical, thermal, pressure, vibration, and environmental tests across diverse equipment and industries.

At Stress Engineering Services we specialize in taking on your toughest technical problems because we understand that you don’t just want answers; you want the right answers. Since 1972, we have been providing solutions for companies and industries that require in-depth technical knowledge and proven performance in the fields of engineering design and analysis, thermal and fluid sciences, instrumentation, and testing. Problem solving is what we do and what we deliver. It is our commitment to provide the most comprehensive design, analysis, and testing services with an unsurpassed level of engineering integrity and expertise. This devotion to quality stems from the two basic principles on which the company was founded – technical excellence and a passion to serve. Multi-disciplinary engineering methods, advanced technology, innovative applications, and a highly knowledgeable and experienced staff characterize the level of our expertise. However, expertise by itself without a spirit of service lacks value. We listen to clients – their requirements, expectations, schedules, and concerns – and provide them with the service they deserve.

Stress Engineering Services Inc.

Test Technician

clearcompany

YEAR

Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. Operate tubing fabrication equipment including tube benders, coning and threading machines, flaring tools, saws, threaders, and pressure testing equipment.

EnerMech

ES/IIS Technician- Instrumentation Tubing Fitter

Workable

Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. Experience within oil & gas, petrochemical, pipeline, offshore or industrial environments would be advantageous, along with experience in hydraulic flushing, hydrostatic testing, hydraulic control panels, manifolds and power units.

ES/IIS Technician - Hydraulics

Operating through our global business lines of Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions, we provide a broad range of specialist services including cranes, lifting, fluid power, training, equipment rental, pipeline, process, subsea, and valve services. At EnerMech, we are driven by operational excellence, innovation, and technical expertise, delivering value through integrated solutions that reduce risk, improve efficiency, and enhance performance for our customers worldwide.

ES/IIS Technician - Hose Management

PERMANENT

By collaborating with engineering and production teams, interpreting schematics, documenting repairs, and applying analytical problem-solving to deliver permanent solutions, the Equipment Maintenance Technician upholds operational reliability and efficiency, directly contributing to the success of Starship’s mission to advance human space exploration. This hands-on position involves performing preventative and corrective maintenance on complex automation systems, troubleshooting and resolving issues in control, electrical, hydraulic, pneumatic, and mechanical components—such as PLCs, servomotors, actuators, gearboxes, overhead cranes, and KUKA robotics—while adhering to safety protocols.

SpaceX

Equipment Maintenance Technician, Heatshield (Starship)

greenhouse_via_bold

unassisted) 2 hours or longer per day  Climb (ladder/stairs): up to 3 hours per day  Kneel/Crouch: up to 3 hours per day  Upper body twist: Up to 3 hours per day  Ability to work in temperatures over 80 degrees: up to 3 hours per day  Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, using an air purifying respirator, and performing the physical requirements of the job listed in the job description. By collaborating with engineering and production teams, interpreting schematics, documenting repairs, and applying analytical problem-solving to deliver permanent solutions, the Equipment Maintenance Technician upholds operational reliability and efficiency, directly contributing to the success of Starship’s mission to advance human space exploration.

Equipment Maintenance Technician (Starship)

Perform maintenance tasks as required in a variety of roles for vehicle integration, pad maintenance, site preventative maintenance, general facilities, and any other general maintenance work to maintain an operational launch site (including corrosion control). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Maintenance Technician - Level 4/5

Equipment Maintenance Technician (Starship) - Level 4/5

By collaborating with engineering and production teams, interpreting schematics, documenting repairs, and applying analytical problem-solving to deliver permanent solutions, the Equipment Maintenance Technician upholds operational reliability and efficiency, directly contributing to the success of Starship's mission to advance human space exploration. This hands-on position involves performing preventative and corrective maintenance on complex automation systems, troubleshooting and resolving issues in control, electrical, hydraulic, pneumatic, and mechanical components-such as PLCs, servomotors, actuators, gearboxes, overhead cranes, and KUKA robotics-while adhering to safety protocols.

Space Exploration Technologies

The Fleet Maintenance Technician will perform repairs and preventative maintenance on a diverse range of equipment critical to Starship production, including automotive assets, heavy transit vehicles, heavy industrial lifting equipment, diesel engines, self-propelled modular transporters (SPMTs), cranes, small engines, and various industrial machinery. Troubleshoot and repair control & electrical system failures involving - PLCs, HMIs, servomotors, servo amplifiers, input/output, field sensors.

Fleet Maintenance Technician (Starship)

Perform maintenance tasks as required in a variety of roles for vehicle integration, pad maintenance, site preventative maintenance, general facilities, and any other general maintenance work to maintain an operational launch site (including corrosion control). RESPONSIBILITIES: Fabricate and install fluid system components from a schematic or engineering drawing, including, but not limited to, ball valves, check valves, pressure regulators, and pressure gauges.

Working closely with procurement, operations, and project teams, the position ensures materials and finished products are safely and accurately received, stored, assembled, documented, and prepared for shipment. Minimum 3 years of hands-on experience in warehouse, production, or technical operations, including demonstrated experience performing mechanical or basic electrical assembly in a manufacturing, engineering, or similar environment.

BMT Group Ltd

Assembly Technician (Warehouse Operations)

We're especially interested in candidates with hands-on experience in: Industrial Electrical Troubleshooting • 480V Systems • Motors & Motor Controls • Electrical Schematics • PLCs & Controls • Relays & Contactors • Power Distribution • Preventive Maintenance • Manufacturing Equipment. Conditions range from clean work to exposure to odors, fumes, drafts, wet conditions, dirt, grease, smoke, dust, noise, high temperatures and low frigid temperatures.

HOUR

Valmont Industries began in 1946 when our founder, Robert B. Daugherty combined his $5,000 savings and wholehearted belief that business could and should be done better. Since that modest start more than half a century ago, our company has grown to be an international leader in engineered products and services for infrastructure and water-conserving irrigation equipment for agriculture.

From the lighting and traffic structures that guide your way, to communication towers and utility structures that power your home and business, to irrigation equipment that waters the croplands on which your food is grown, Valmont products improve lives worldwide.

Valmont’s employees are passionate about the products we make. Along with our customers, they are the cornerstone of our success. We pride ourselves on being people of integrity who excel at delivering optimal results. We pursue opportunities for growth by taking our products and processes to new markets, introducing new products to regions where we have a presence, and continually improving our services to ensure that Valmont solutions are second-to-none.

Crane Technician Jobs in Texas

FM - Technician - Multi Skill Fluor Corporation

Maintenance Technician SSAB AB

Maintenance Equipment Technician Sanmina Corp

Valve Technician - 1st Shift Openwork

Test Technician Stress Engineering Services Inc.

ES/IIS Technician- Instrumentation Tubing Fitter EnerMech

ES/IIS Technician - Hydraulics EnerMech

ES/IIS Technician - Hose Management EnerMech

Equipment Maintenance Technician, Heatshield (Starship) SpaceX

Equipment Maintenance Technician (Starship) SpaceX

Maintenance Technician - Level 4/5 SpaceX

Equipment Maintenance Technician (Starship) - Level 4/5 SpaceX

Equipment Maintenance Technician (Starship) - Level 4/5 Space Exploration Technologies

Equipment Maintenance Technician, Heatshield (Starship) Space Exploration Technologies

Fleet Maintenance Technician (Starship) Space Exploration Technologies

Maintenance Technician - Level 4/5 Space Exploration Technologies

Equipment Maintenance Technician (Starship) Space Exploration Technologies

Assembly Technician (Warehouse Operations) BMT Group Ltd

Electromechanical Technician I, II Or III - Evenings Valmont Industries, Inc.

Electromechanical Technician I, II Or III - Days Valmont Industries, Inc.

Similar Job Searches

Stand out to leading employers.