UNKNOWN

FEED

ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RESPONSIBILITIES: Drill, ream, and countersink full-size holes in parts/assemblies, in proper sequence and to correct size using a drill motor, bits, reamers and countersinks to meets specified dimensional requirements.

HOUR

Space Exploration Technologies Corp

Metal Spinning Technician COPV

linkup_via_bold

Basic Qualifications for Dimension Control Technician 2: High School Diploma/GED or equivalent with 2 years of experience in tool building and/or laser tracking and/or machinist experience and/or welding and/or repair work. Ability to obtain and maintain a DOD Secret level clearance, including Special Access Program within a reasonable period, as determined by the company to meet its business needs.

PROLIM Global Corporation

Tool Technician 2

Summary The purpose of the General Technician I position is to enable employees to operate multiple machines depending on departmental needs to cover work load, vacations and other challenges. Job Duties: Operate proficiently a group of machines to include Saw, Brinnell, ID Blast and OD Blast.

FIBA Technologies

General Technician

sourcestack_via_bold

Facilitate and perform component and assemblies testing operations on rocket and spacecraft structures, components and subcomponents (Pressurized testing, cycle testing, fatigue testing, etc.). ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Structures Technician Starship

Working primarily on Zeiss CMMs with Calypso software, this role establishes part alignments and fixturing, interprets and applies GD&T per ASME Y14.5, and dispositions parts as conforming or non-conforming. Collect and analyze SPC data; generate and interpret capability studies (Cpk/Ppk), control charts and trend data, and alert production to drifting processes before parts fall out of tolerance.

Toyota Racing Development - USA

CMM Inspector Technician

100hires

You'll work closely with engineers and other technicians to build and install airframe components, propulsion mounts, wiring harnesses, and actuation systems. We validated high-speed generator technology faster than our peers, not because we skipped steps, but because weve been doing this long enough to know which ones matter most.

Odys Aviation, Inc.

Mechanical Technician - Airframe

We are looking for a Mechanical Technician to support the assembly, integration, and testing of Hybrid Electric Powerplant systems across aircraft and testing platforms. eVTOL/UAV Knowledge: Demonstrated experience working with electric propulsion, lithium-ion battery integration, or hybrid-electric architectures.

Mechanical Technician - Powerplant

FULL_TIME

MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers . Responsibilities: As a Tower Technician II , you are responsible for installing, maintaining, and operating wired, wireless, fiber optic, and microwave telecommunications equipment and systems .

MasTec Communications Group

Tower Technician II

[AW]-iCims

PERMANENT

Perform finish carpentry tasks, such as door installation and framing, drywall repair, tiling, carpeting, concrete pouring, cabinetry, layout, installation, repair, finishing, maintaining various structures, fixtures and buildings. Experience with carpentry maintenance tasks including routine sheetrock/drywall installation and/or repair, window replacement, cabinet/countertop replacement, painting/texturing (interior and exterior) and door/hardware installation.

SpaceX

Construction Technician

greenhouse_via_bold

RESPONSIBILITIES: Perform finish carpentry tasks, such as door installation and framing, drywall repair, tiling, carpeting, concrete pouring, cabinetry, layout, installation, repair, finishing, maintaining various structures, fixtures and buildings. Experience with carpentry maintenance tasks including routine sheetrock/drywall installation and/or repair, window replacement, cabinet/countertop replacement, painting/texturing (interior and exterior) and door/hardware installation.

Space Exploration Technologies

ea_via_bold

The role includes assembling and welding components, interpreting blueprints, ensuring NEC-compliant wiring, preparing materials from bills of materials, and supporting shop operations through accurate documentation and inventory coordination. Safely operate fabrication tools and equipment, including welders, cutters, grinders, forklifts, cranes, and power tools.

California Hydronics Corp

Hydronic Technician

clearcompany

The Service Technician Special Operations I will work as a part of the Services Resources department and will perform a variety of activities including but not limited to: Gearbox disassembly/reassembly refurbishment, inspections, retrofits, large component repairs. Utilizes specialized tooling and equipment to perform activities: SKF Mounting/Dismounting high-pressure tooling, low-speed shrinks disc tooling, load rigging, torque, and tension equipment.

Nordex SE

Service Technician Special Operations I, Gearbox (M/F/D)

ADAPTED_NOW

_Skills:_ Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. + _Abilities_ : Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter.

Crane Aerospace & Electronics

R&O Technician III

Knowledge in the following areas: data center cooling (chillers, cooling towers, CRAH/CRAC, chilled water), plumbing, electrical safety, pneumatic principles, tubing, pipefittings, rotating machinery (pumps, air compressors, generators, etc.), UPS and switchgear operations, and a variety of mechanical fasteners. Operate, inspect, maintain, and repair critical data center infrastructure, including chilled-water plants, condensers, cooling towers, pumps, valves, filters, computer-room air handlers (CRAH/CRAC), air handlers, piping, and associated controls.

Data Center Facilities Technician

Directs and participates in the maintenance of a variety of equipment used at the WRRF including pumps, motors, chemical feeders, hydraulic/pneumatic systems, chlorinators, sulfonators, residual analyzers, transducers, screens, filters, pressure vessels, grinders, IC engine generators, valves, turntables, compressors, blowers, etc. Professional Association for City Employees (PACE): voluntary organization for professional development training classes, monthly membership meetings with a variety of speakers, and social functions designed to facilitate interaction with employees from all departments in a relaxed setting away from work.

YEAR

City of San Luis Obispo

Water Resource Recovery Facility Maintenance Technician (SBP)

PREFERRED SKILLS AND EXPERIENCE: Knowledge in the following areas: data center cooling (chillers, cooling towers, CRAH/CRAC, chilled water), plumbing, electrical safety, pneumatic principles, tubing, pipefittings, rotating machinery (pumps, air compressors, generators, etc.), UPS and switchgear operations, and a variety of mechanical fasteners. Operate, inspect, maintain, and repair critical data center infrastructure, including chilled-water plants, condensers, cooling towers, pumps, valves, filters, computer-room air handlers (CRAH/CRAC), air handlers, piping, and associated controls.

Abilities: Ability to learn new test software and equipment and to identify non-conforming conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time entry, data entry, on-line training PDM and MRP systems; Ability to think analytically and provide constructive feedback. + Calibrate or otherwise adjust assigned units by such means as component selection, potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; Make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments.

Electronics Technician Level (Electronic Assembly)

MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers. Responsibilities As a Tower Technician II, you are responsible for installing, maintaining, and operating wired, wireless, fiber optic, and microwave telecommunications equipment and systems.

MasTec Inc

Equipment to be maintained and repaired includes: Automation equipment (robotics), CNC machines, process ovens, autoclaves, air compressors, material handling equipment, forklifts, fleet vehicles, vacuum systems, freezers, and Chiller systems. Company Overview: Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most.

Crane Technician Jobs in California

Metal Spinning Technician COPV Space Exploration Technologies Corp

Tool Technician 2 PROLIM Global Corporation

General Technician FIBA Technologies

Structures Technician Starship Space Exploration Technologies Corp

CMM Inspector Technician Toyota Racing Development - USA

Mechanical Technician - Airframe Odys Aviation, Inc.

Mechanical Technician - Powerplant Odys Aviation, Inc.

Tower Technician II MasTec Communications Group

Construction Technician SpaceX

Construction Technician Space Exploration Technologies

Hydronic Technician California Hydronics Corp

Service Technician Special Operations I, Gearbox (M/F/D) Nordex SE

R&O Technician III Crane Aerospace & Electronics

Data Center Facilities Technician SpaceX

Water Resource Recovery Facility Maintenance Technician (SBP) City of San Luis Obispo

Data Center Facilities Technician Space Exploration Technologies

Electronics Technician Level (Electronic Assembly) Crane Aerospace & Electronics

Tower Technician II MasTec Inc

Equipment Maintenance Technician - 4th shift Joby Aviation

Equipment Maintenance Technician Joby Aviation

Similar Job Searches

Stand out to leading employers.