Controls Engineer Vantage Point RecruitingControls EngineerBiddeford, MESuccessful candidates will achieve results in solving technical problems, designing new equipment, improving existing processes, and supporting customer focused programs. The Controls Engineer is responsible for supporting current production systems and design of future systems with target improvements in safety, quality, cost, uptime, and cycle time.
Prin Controls Engineer (Field Service Engineering) General Dynamics Ordnance and Tactical Systems IncPrin Controls Engineer (Field Service Engineering)Saco, METhe Principal Controls Engineer (Field Service Engineering) leads the Active Protection (APS) initiative including installation, troubleshooting, diagnostics, and customer support at various domestic and international locations. General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world.
Senior Automation Controls Engineer Lanco IntegratedSenior Automation Controls EngineerWestbrook, MEFull timeAs our Senior Automation Controls Engineer, you'll own the controls from code to commissioning, through writing the logic, integrating the systems, and standing behind your work when the customer runs acceptance testing. Travel to customer sites for Site Acceptance Testing (SAT) execution, field updates, and occasional emergency service - travel time is compensated at your hourly rate plus a travel incentive.
Controls Engineer Fiber MaterialsControls EngineerBiddeford, MEOur materials are being used on ground-breaking space initiatives such as the Orion Multi-Purpose Crew Vehicle and the heat shield for NASA's Mars 2020 mission, important missile programs, airfoils in commercial and military jet engines, and as lightweight armor for U.S. military ground vehicles. The focus in Maine is on multidirectional reinforced Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMCs) that enable high-temperature components such as: thermal protection systems, re-entry vehicle nose tips as well as rocket motor throats and nozzles.
Prin Controls Engineer (Field Service Engineering) General Dynamics Ordnance & Tactical SystemsPrin Controls Engineer (Field Service Engineering)Saco, MaineJob Summary: The Principal Controls Engineer (Field Service Engineering) leads the Active Protection (APS) initiative including installation, troubleshooting, diagnostics, and customer support at various domestic and international locations. Company Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world.
Controls Engineer Trane Technologies PlcControls EngineerWestbrook, ME$65,200–$118,860 / yearWhat you will bring: Degree in Electrical/Mechanical Engineering, Construction or Engineering Technology, or other related areas; or three (3) plus years of experience in the HVAC industry performing project management or estimating roles; or an equivalent combination of education and work experience. Thrive at work and at home: Benefits kick in on DAY ONE for you and your family, including health insurance and holistic wellness programs that include generous incentives - WE DARE TO CARE!
Controls Engineer CFO Trane U.S. -CFOControls EngineerWestbrook, New HampshireDegree in Electrical/Mechanical Engineering, Construction or Engineering Technology, or other related areas; or three (3) plus years of experience in the HVAC industry performing project management or estimating roles; or an equivalent combination of education and work experience. Paid time off includes 15 vacation days, 9 paid holidays, 3 floating holidays, sick leave, and additional options to support volunteer and parental leave.
NewControls Engineer Actalent IncControls EngineerPortland, ME$80,000–$100,000 / yearThe Controls Engineer designs, programs, and supports automated machinery by developing robust PLC and HMI solutions, integrating robotics and vision systems, and ensuring reliable, safe, and efficient machine operation throughout the full automation lifecycle. This role combines hands-on programming, system integration, testing, and field support, with a strong focus on clear documentation, collaboration with build teams, and delivering high-quality turnkey automation systems to customers.
NewBAS - Controls Design Engineer ControlsJobsBAS - Controls Design EngineerPortland, MaineWork/Services: BAS Services, Equipment and software installations, preventative maintenance, Controls heating, ventilation, AC, commercial lighting. Cliental: Commercial Buildings, municipal/government, education, healthcare, industrial, and military facilities.
Prin Controls Engineer (Field Service Engineering) General Dynamics CorpPrin Controls Engineer (Field Service Engineering)Saco, MEGeneral Dynamics Ordnance and Tactical Systems is a global leader in the design, engineering and production of munitions, weapons, lightweight tactical vehicles, missile components and armament systems around the world. General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world.
Sr. Substation Protection & Control Engineer WSP Global IncSr. Substation Protection & Control EngineerME$83,200–$145,530 / yearWSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. Developed critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, statistical analysis and arriving at the most effective, economical, and logical solution.
Sr Manufacturing Process Engineer - PCB / SMT, NPI, Lean, Quality & Process Control, Team Lead (Contract Mfg. a +) KORE1 TechnologiesSr Manufacturing Process Engineer - PCB / SMT, NPI, Lean, Quality & Process Control, Team Lead (Contract Mfg. a +)Gray, MEHands-on experience with PCBA assembly: surface mount technology (SMT) - required, through-hole - required, selective soldering, hand soldering, AOI, laser marking, mini-wave soldering, conformal coating, and/or board washing (any of these others are helpful). As a Senior Manufacturing Process Engineer - PCB, you will employ your extensive knowledge of production techniques to develop and document manufacturing processes for electronic assemblies assigned to you, ensuring reliable, high-quality assemblies at the lowest possible cost.
Principal Engineer - Protection & Control IberdrolaPrincipal Engineer - Protection & ControlPortland, MaineTheoretical Engineering knowledge - Planning, Operations and Engineering Design, Analytic, modeling & Calculation, understanding the business model; Global View of the Business (Values cross-functional collaboration, understands importance of growing knowledge and developing relationships and links across the organization). Relocation Benefits: Up to $10k allowance offered, including household goods transport, up to two car transportations, one month of temporary lodging, and up to 10 days of car rental, airfare and meals offered for eligible employees.
Controls Account Manager Trane Technologies PlcControls Account ManagerWestbrook, ME$98,300–$229,800 / yearIn this role, you are primarily responsible for delivering on our business strategy by developing long term customer relationships with consulting engineers, contractors, and building owners with a focus on providing customers a total solution for the most energy efficient buildings. DL NUMBER - Driver License, Valid and in State with no major or frequent traffic violations included, but not limited to: DUI, Hit & Run, License Suspension, Reckless/Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.
Controls Account Manager CFO Trane U.S. -CFOControls Account ManagerWestbrook, MaineIn this role, you are primarily responsible for delivering on our business strategy by developing long term customer relationships with consulting engineers, contractors, and building owners with a focus on providing customers a total solution for the most energy efficient buildings. DL NUMBER - Driver License, Valid and in State with no major or frequent traffic violations included, but not limited to: DUI, Hit & Run, License Suspension, Reckless/Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.
NewAutomation Engineer Actalent IncAutomation EngineerWestbrook, ME$80,000–$100,000 / yearIf you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service.
Staff Electrical Component Engineer GeneracStaff Electrical Component EngineerSouth Portland, MaineParticipate in design reviews with the electrical engineering team, contributing to the development and validation of electrical systems, including schematics, PCB layouts, and wiring diagrams for solar and battery energy storage applications. Own qualification and technical evaluation of electronic components, including MOSFETs, PCBs, magnetics (wound components), discrete analog/digital components, relays, ICs, and interconnects (cables and connectors).
Sr. / Principal Electrical Engineer, Waterfront Engineering General Dynamics CorpSr. / Principal Electrical Engineer, Waterfront EngineeringMEInterface with the local Navy customer, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, testing, commissioning efforts, dock trials, sea trials, and resolution of technical issues with assigned systems/tasking. The successful candidate will be responsible for different facets of Engineering that include supporting development, manufacturing, integration/installation, and testing, of Electrical Power, Lighting, and Controls systems installed shipboard, or in support of shipboard system operation.
Electrical Engineer I / II / III, Waterfront Engineering General Dynamics - Bath Iron WorksElectrical Engineer I / II / III, Waterfront EngineeringBath, MaineFull timeInterface with the local Navy customer, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, testing, commissioning efforts, dock trials, sea trials, and resolution of technical issues with assigned systems/tasking. The successful candidate will be responsible for different facets of Engineering that include supporting development, manufacturing, integration/installation, and testing, of Electrical Power, Lighting, and Controls systems installed shipboard, or in support of shipboard system operation.
ESSP Electrical Engineer - Experience Professional WSP Global IncESSP Electrical Engineer - Experience ProfessionalFreeport, MEPower System Planning Studies: steady-state real and reactive power flow including outage contingencies, generation interconnect feasibility, P-V and Q-V analysis for voltage stability margins, dynamic stability performance, automation of large batch simulations, working with models from NERC regional entities (WECC, MRO, SERC etc.), NERC compliance. Design Studies: substation grounding, corona, electric and magnetic fields, insulation coordination (lightning, switching surge, and contamination performance), transient (time domain) simulation, power quality (harmonics, voltage flicker, over/under voltage, etc.), motor starting, AC interference (transmission line interaction with railroads and pipelines).
Sr. / Principal Electrical Engineer, Waterfront Engineering General Dynamics - Bath Iron WorksSr. / Principal Electrical Engineer, Waterfront EngineeringBath, MaineFull timeInterface with the local Navy customer, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, testing, commissioning efforts, dock trials, sea trials, and resolution of technical issues with assigned systems/tasking. The successful candidate will be responsible for different facets of Engineering that include supporting development, manufacturing, integration/installation, and testing, of Electrical Power, Lighting, and Controls systems installed shipboard, or in support of shipboard system operation.
Senior Staff Electrical Engineer Generac Power Systems IncSenior Staff Electrical EngineerME$161,200–$217,600 / yearServe as an expert resource within the organization to guide and mentor engineering staff including reviewing designs and providing feedback, proactively identifying risk and proposing mitigations/contingencies, proposing ideas/options to improve project speed/timeliness, etc. Specifies precise new product and technology functional requirements; designs, tests and integrates the most complex components to produce final designs; and evaluates the design's overall effectiveness, cost (including cost/benefit analysis), reliability (risk analysis), and safety.
Project Engineer, Renewable Electrical Engineering (SCADA) Invenergy LLCProject Engineer, Renewable Electrical Engineering (SCADA)MERemote$105,000–$130,000 / yearMonitor construction progress remotely and via on site visits, support resolution of field issues, attend in person meetings with stakeholders, and provide on-site programming and field support during commissioning when required. With 25 years of trusted execution, we deliver reliable, affordable energy through a diverse portfolio that includes natural gas, solar, land-based wind, energy storage, transmission, and domestic manufacturing.
Senior Staff Electrical Engineer GeneracSenior Staff Electrical EngineerSouth Portland, MassachusettsServe as an expert resource within the organization to guide and mentor engineering staff including reviewing designs and providing feedback, proactively identifying risk and proposing mitigations/contingencies, proposing ideas/options to improve project speed/timeliness, etc. Specifies precise new product and technology functional requirements; designs, tests and integrates the most complex components to produce final designs; and evaluates the design's overall effectiveness, cost (including cost/benefit analysis), reliability (risk analysis), and safety.
Quality Control Inspector nex MasTec IncQuality Control Inspector nexMEWith a genesis in construction and a skilled team of multidiscipline engineers and project management professionals, the company delivers best-in-class infrastructure solutions, including design, asset integrity management, feasibility studies, surveys, constructability reviews, turnkey delivery services, and more. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding.
Electrical Engineer I / II / III, Waterfront Engineering Bath Iron Works CorpElectrical Engineer I / II / III, Waterfront EngineeringMEInterface with the local Navy customer, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, testing, commissioning efforts, dock trials, sea trials, and resolution of technical issues with assigned systems/tasking. The successful candidate will be responsible for different facets of Engineering that include supporting development, manufacturing, integration/installation, and testing, of Electrical Power, Lighting, and Controls systems installed shipboard, or in support of shipboard system operation.
Sr. / Principal Electrical Engineer, Waterfront Engineering Bath Iron Works CorpSr. / Principal Electrical Engineer, Waterfront EngineeringMEInterface with the local Navy customer, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, testing, commissioning efforts, dock trials, sea trials, and resolution of technical issues with assigned systems/tasking. The successful candidate will be responsible for different facets of Engineering that include supporting development, manufacturing, integration/installation, and testing, of Electrical Power, Lighting, and Controls systems installed shipboard, or in support of shipboard system operation.
Electrical Engineer I / II / III, Waterfront Engineering General Dynamics CorpElectrical Engineer I / II / III, Waterfront EngineeringMEInterface with the local Navy customer, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, testing, commissioning efforts, dock trials, sea trials, and resolution of technical issues with assigned systems/tasking. The successful candidate will be responsible for different facets of Engineering that include supporting development, manufacturing, integration/installation, and testing, of Electrical Power, Lighting, and Controls systems installed shipboard, or in support of shipboard system operation.
Electrical Engineer II Generac Power Systems IncElectrical Engineer IISouth Portland, MEPerform and support analyses to verify design requirements, including circuit simulation, DFMEA, and reliability assessments for design margin and component deratings. Familiarity with test equipment typically used for power converter development such as high-performance oscilloscopes, spectrum analyzers, power analyzers, etc.
Electrical Engineer II GeneracElectrical Engineer IISouth Portland, MainePerform and support analyses to verify design requirements, including circuit simulation, DFMEA, and reliability assessments for design margin and component deratings. Familiarity with test equipment typically used for power converter development such as high-performance oscilloscopes, spectrum analyzers, power analyzers, etc.
Field Engineer Gr 3 EversourceField Engineer Gr 3Yarmouth, MAField Engineers must effectively conduct their work activities with regard to the work of others such as engineers or others working on the same projects; personnel of other departments; representatives of consulting engineering firms, municipalities, other utilities, manufacturers, customers, contractors; and contractors’ employees engaged in related activities. 3, designates employees whose responsibilities and duties require professional knowledge and aptitude for creative thinking in some specific field of engineering, such as electrical, electronic, mechanical, chemical, civil, heating and ventilation, or structural and whose activities are in connection with engineering construction, operation or maintenance assignments, or other technical work of the Company.
Lead Power Distribution Design Engineer Eaton Corporation PlcLead Power Distribution Design EngineerLewiston, ME$97,000–$143,000 / yearOur team specializes in handling both greenfield and brownfield turnkey electrical projects and has expertise in designing and constructing high and medium-voltage substations and developing power distribution solutions for utilities, government, data centers, industrial, and commercial facilities. Responsible for leading design deliverables to maintain project schedule, design budget, design accuracy, and submittal completeness working in concert with a broader execution team.
MEP Project Engineer/Manager Haley WardMEP Project Engineer/ManagerPortland, ME$110,426–$126,567 / yearThe Project Engineer/Manager will be responsible for planning, organizing, designing, and controlling the activities of projects to best accomplish the successful completion while operating within established schedules, budgets, and Quality Assurance/Quality Control (QA/QC) policy constraints. Actual compensation may vary based on factors such as related work experience, location, market conditions, education/training, certifications, credentials, skills, and demonstrated proficiency for the role.
senior-electrical-engineer-substation-northeast-region Burns & McDonnellsenior-electrical-engineer-substation-northeast-regionPortland, ME$150,000–$240,000 / yearLeads the preparation and development of substation design packages including-but not limited to-physical arrangement above and below grade, protective relaying and control, electrical studies such as grounding and lightning analysis, and lighting and security. Job: Engineering Primary Location: US-CT-Wallingford Other Locations: US-NJ-Morristown, US-MA-Newton, US-ME-Portland, US-PA-Conshohocken Schedule: Full-time Travel: Yes (20% of the Time) Req ID: 261235 Job Hire Type: Experienced LI-JNH T&D NA.
staff-electrical-engineer-substation-northeast-region Burns & McDonnellstaff-electrical-engineer-substation-northeast-regionPortland, ME$105,000–$175,000 / yearBachelor Degree in Electrical Engineering, Mechanical Engineering, or related degree from an ABET accredited program and 3 years of substation engineering experience (consulting preferred/required). Description The Staff Substation Engineer will work under the supervision of a licensed professional engineer to develop design deliverables for new and modified high-voltage 13kV to 765kV electrical power substation projects.
Automation Engineer (Onsite) RTX CorpAutomation Engineer (Onsite)North Berwick, MEQualifications You Must Have: Bachelor's Degree or equivalent demonstrated experience in Industrial electrical engineering, Computer/ Software engineering, Engineering, Manufacturing or related discipline and/or 5+ years of experience in automated systems specifically in manufacturing environments. At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.
Senior Electrical Engineer Salas O'Brien Engineers IncSenior Electrical EngineerME$120,000–$150,000 / yearOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Job Summary: These offices focus primarily on building related projects, including academic buildings, life sciences, and healthcare facilities.
Staff Electrical Components QA Engineer Generac Power Systems IncStaff Electrical Components QA EngineerMEParticipate in design reviews with the electrical engineering team, contributing to the development and validation of electrical systems, including schematics, PCB layouts, and wiring diagrams for solar and battery energy storage applications. Own qualification and technical evaluation of electronic components, including MOSFETs, PCBs, magnetics (wound components), discrete analog/digital components, relays, ICs, and interconnects (cables and connectors).
Senior Automation Engineer Abbott LaboratoriesSenior Automation EngineerScarborough, ME$78,000–$156,000 / yearAbbott Rapid Diagnostics is part of Abbott's Diagnostics family of businesses, bringing together exceptional teams of experts and industry leading technologies to support diagnostic testing which provides important information for treatment and management of diseases and other conditions. Applies strong knowledge of fabrication and mechanical principles-including CNC machining, milling, welding, mechanical assemblies, and bolted connections-to support the design, modification, and integration of automated systems and test equipment.
Substation Project Engineer WSP Global IncSubstation Project EngineerME$98,300–$145,970 / yearTasks include the research, design, planning, and delivery of transmission and distribution substations, power distribution systems, power regulation equipment, renewable energy interconnections, and coordination with protection and control systems across a wide variety of utility projects, supporting substation physical design and/or protection and control (P&C) design scopes based on project needs. Perform professional and complex electrical engineering work associated with substation physical and/or protection and control (P&C) design, including preparation and review of one‑line and three‑line diagrams, wiring and interconnection diagrams, control schematics, substation general arrangements, equipment and bus configurations, grounding grid design, and lightning protection systems.
PTE Project Engineer & Technical Manager WSP Global IncPTE Project Engineer & Technical ManagerMEThis role ensures technical training is developed to support safe, effective, and efficient work processes through a combination of technical understanding, project/client/team needs, and focused growth areas as defined by the PTE personnel and project management teams. Apply high-level electrical engineering techniques and processes to identify improvements for various infrastructure project phases involving more complex infrastructure engineering work, including concept development, preliminary design, final design, procurement, construction, and operation.
Senior Electrical Engineer Salas O'BrienSenior Electrical EngineerPortland, MaineOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Job Summary: These offices focus primarily on building related projects, including academic buildings, life sciences, and healthcare facilities.
Principal Protection Electrical Engineer WSP Global IncPrincipal Protection Electrical EngineerME$177,800–$337,800 / yearWSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. 15+ years of relevant post education experience as an electrical engineer executing deliverables for Protective Relaying projects in power generation, transmission, and distribution at a utility or industrial scale.
Experienced Substation Structural Engineer WSP Global IncExperienced Substation Structural EngineerFreeport, ME$82,800–$151,100 / yearWork as an individual or as part of a cross-functional team of engineers, architects, planners, and scientific professionals to execute project work, assist with laying out installations, establishing reference points/elevations/grades to guide construction, selecting appropriate materials to ensure durability, calculating costs and quantities of material/equipment/labor, and ensuring project work conforms with specifications, permit applications, compliance documentation, and regulatory and technical analysis memos. WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location.
Entry-Level Electrical Engineer Salas O'Brien Engineers IncEntry-Level Electrical EngineerPortland, ME$75,000–$90,000 / yearWe are experts in projects for education, healthcare, science and technology, high-rise, clean energy, data center, government, hospitality, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical experts are supported by an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day.
NewMechanical Engineer Kyocera AVX Components CorpMechanical EngineerBiddeford, MEAs a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
MEP Project Engineer/Manager Haley Ward IncMEP Project Engineer/ManagerPortland, METhe Project Engineer/Manager will be responsible for planning, organizing, designing, and controlling the activities of projects to best accomplish the successful completion while operating within established schedules, budgets, and Quality Assurance/Quality Control (QA/QC) policy constraints. Haley Wards work philosophy is to take advantage of the benefits of collaboration, mentoring, and face-to-face communication in order to optimize our operations and performance for our clients.
Senior Electrical Engineer Salas O'Brien, Inc.Senior Electrical EngineerPortland, ME$120,000–$150,000 / yearPart timeOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Job Summary: These offices focus primarily on building related projects, including academic buildings, life sciences, and healthcare facilities.
Project Engineer (PE) Electrical - Sr Technical Manager WSP Global IncProject Engineer (PE) Electrical - Sr Technical ManagerMEThe successful candidate will be primarily responsible for working with our project management team, engineering teams, and directly with clients to manage business development among existing and new clients targeting NERC compliance services. Project Engineering includes leading others in the preparation of proposals and executing studies and providing engineering services for utility, renewable, and industrial/commercial electrical power transmission and distribution systems.
Senior Digital Integration Solutions - Field Service Engineer Eaton Corporation PlcSenior Digital Integration Solutions - Field Service EngineerME$104,000–$145,000 / yearJoin Eaton's Electrical Engineering Services & Systems team and be part of a dynamic group delivering innovative solutions across the entire power system lifecycle-from design and build to long-term support. Provide applied engineering and consultation to customers in the areas of system integration, installation, start-up, maintenance, repair, training and modification of power management, control, and mission critical systems.