April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
p/>Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. December 5, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
p>The Formwork Engineer supports projects by preparing structural formwork calculations, drafting detailed structural concrete and formwork drawings and coordinating closely with project teams to ensure design accuracy, safety, and cost efficiency. Prepare concrete structure and formwork drawings by incorporating information from project drawings, bulletins, sketches, RFIs, and other trade shop drawings, and coordinate submittals with customers.
p>The Project Engineer supports the planning, design, and execution of construction projects by drafting detailed structural concrete and formwork drawings and coordinating closely with project teams to ensure design accuracy, safety, and cost efficiency. Prepare concrete structure and formwork drawings by incorporating information from project drawings, bulletins, sketches, RFIs, and other trade shop drawings, and coordinate submittals with customers.
Westminster, CO5 days ago
li>Structural dynamics analysis experience: Using computer-aided design (CAD) software, Finite Element Analysis (FEA) tools to construct and run satellite and launch stack structural models, evaluate profile notching, verify dynamic envelopes and compliance to launch vehicle ICDs. Additionally, this position is incentive eligible with a target based on contribution, company performance, and/or individual results achieved; the specific incentive plan and target amount will be determined based on the role and breadth of contributions.The application window is three days from the date the job is posted and will remain posted until a qualified candidate has been identified for hire.
Greenwood Village, CO13 days ago
Summary: As a Senior Software Engineer on the Configuration Management and eXperimentation team (CMX), in the applied AI and data science program, you'll help design and develop software solutions that expand Charter's custom experimentation and configuration management platform. Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs.
p>This entry level position ensures compliance with applicable U.S. export and import control laws, including the Export Administration Regulations (āEARā), International Traffic in Arms Regulation (āITAR"), and the Office of Foreign Asset and Control (āOFACā) sanctions, and regional and local regulations concerning the movement of goods and services across borders. Using their engineering knowledge, skills and abilities, a Trade Compliance Engineer and Analyst to review part specification sheets, related product documentation, and the Export Administration Regulations to determine Export Classification Code Numbers (āECCNā) and or local country export classifications for items sold.
CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Electronics Tech Technician Electrician Engineer Install Repair Calibrate Configure Program Maintain Maintenance Programming Automayion Robotic Systems Robots Robot Arms End of Arm Tooling EOAT Nachi Motoman Kuka FANUC Yaskawa Janome SCARA PLCs Motion Controllers Servo Motors Drives Sensors Vision Systems Assembly Automation #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #biotechjobs #FieldServiceJobs #LabTechnicianJobs. Field Service Tech Technician Engineer Maintenance Mechanic Manufacturing Robots End of Arm Tooling EOAT PLC Programmable Logic Controller Programmer Controls Vision Systems Automation Kuka Motoman FANUC _ .
Littleton, CO30+ days ago
This role will be responsible for developing, scoping, coordinating, justifying, implementing, and managing from start to finish a broad range of industrial electrical and control system manufacturing projects, including scope documents, engineering calculations and designs, specifications, cost estimates, schedules, project justifications, and project training and documentation for manufacturing facilities in North America. We align strategy with execution and provide secure service solutions by developing and using the latest technologies that thrive our resources to deliver industry-leading capabilities to our clients and customers, making it convenient for our clients to do business with InterSources Inc.
Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. As a Lead Substation Protection & Controls Engineer, you'll own complex P&C designs across 12-500 kV systems, applying advanced digital logic and AC/DC circuit expertise to engineer solutions that protect the modern grid and enable renewable integration.
What You'll Do: As part of our Microgrid Controls Team, you will design, develop, test, implement and commission Microgrid Control solutions consisting of Solar Photovoltaic (PV), Battery Energy Storage Systems (BESS), Diesel/Natural Gas and Generators for our customers, using Automation Controllers, HMI's, Multi-function Protection Relays, and Data Concentrators from all major OEM's. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
p>As a Controls Engineer III, you lead deployment, programming, optimization, and support of Building Management Systems across Switch data centers. Every Switch team member contributes to a mission greater than themselves: to create the worlds most advanced digital infrastructure that powers the progress of humanity.
By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology.
Westminster, CO30+ days ago
li>As a member of the Automation team, this position includes assisting more senior engineers with preparing the project functional specification, project test specifications, developing PLC code, developing HMI graphics, executing a software Factory Acceptance Test, and performing on-site commissioning and start-up. Control & Automation Engineers interface with both external clients as well as other internal engineering disciplines within the Matrix organization to gather field data, prepare functional specifications, write PLC code, develop HMI graphics, perform client acceptance testing, and start-up new automation systems.
p>This hands-on, high impact role works cross-functionally with Engineering and Production teams to deliver robust and efficient control solutions for manufacturing and process automation for the EV cell pilot line. Ability to wear Personal Protective Equipment (PPE) as necessary including, but not limited to eye protection, hair net, gloves, face mask, coveralls, half or full-face respirator or PAPR.
p>The Controls Engineer II may be responsible for tasks and skills such as (non-exhaustive): - Developing and debugging PLC logic using IEC 61131-3 approved languages, primarily rooted in Beckhoff TwinCAT structured text programming. The employee will be required to wear all appropriate safety equipment including but not limited to eye protection, gloves, steel toe shoes, lab coat, and in the plant, a hard hat.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractors legal duty to furnish information. Must be able to determine client requirements and coordinate technical efforts within discipline areas as necessary, coordinate with other disciplines as needed, manage a design budget and schedule, and be able to demonstrate proficiency in these areas.
li>Customer & Project Interaction - Participate actively in internal and customer-facing meetings, providing technical input and supporting project execution. You'll contribute independently to the development of scalable, high-performance automation platforms, supporting life-saving pharmaceutical and medical technologies, as well as automotive and consumer goods industries.
p>The Controls Engineer II may be responsible for tasks and skills such as (non-exhaustive): ā¢ Developing and debugging PLC logic using IEC 61131-3 approved languages, primarily rooted in Beckhoff TwinCAT structured text programming. The employee will be required to wear all appropriate safety equipment including but not limited to eye protection, gloves, steel toe shoes, lab coat, and in the plant, a hard hat.
p>Benefits: ā¢ Comprehensive health coverage: Medical, Dental, Vision, Disability, and Life Insurance ā¢ Financial wellness: Health Savings Account (HSA) and Lifestyle Spending Account with employer contributions ā¢ Professional development: Support for continuing education and training opportunities ā¢ Work-life balance: Paid Time Off (PTO) and Holiday Pay ā¢ Work Schedule: Flexible 9/80 schedule-every other Friday off!
As a Senior Electrical Engineer and Team Lead in DEA's Energy Business Unit, you will guide the technical execution of utility-scale wind, solar, and Battery Energy Storage System (BESS) projects throughout the Midwest and western United States.
p>Within our Corporate Project Engineering team located in Denver - Leprino is seeking a Controls Engineer I to lead the controls scope for large capital projects and shape the system-level automation architecture that keeps our plants running safely, reliably, and at scale. This role focuses on high-impact project leadership, controls design, and vendor coordination while partnering closely with Controls Integration Engineers who execute detailed programming and commissioning work.
p>We are seeking a Controls Engineer in Denver, CO, to support the design, implementation, and project management of large-scale automation projects, primarily in the oil & gas industry, with additional exposure to life sciences and building automation. This role requires strong experience with Rockwell control systems (preferably PlantPAx), safety instrumented systems, and a proven ability to deliver projects on time and within budget while collaborating across teams.
Louisville, CO30+ days ago
You will own controls architecture from concept through commissioning, debug, and continuous improvement - working closely with Design Engineering, Process Engineering, and cross-functional teams to rapidly bring new cell designs and processes from prototype to production. Hands-on exposure to a wide range of production machinery, sensors, and subsystems (LVDT, pressure transducers, dispense systems, torque controllers, power meters, temperature controllers, etc.).
li>Support control and computer system validation activities including review and execution of automation Factory Acceptance Tests, Site Acceptance Tests, and Installation and Operational Qualification protocols. Pay and benefit information by country are available at: https://careers.agilent.com/locations.
Boulder, Colorado30+ days ago
p style="min-height:1.5em">We're looking for a hands-on Embedded Controls Engineer to own firmware, plant identification, and closed-loop control for a novel actuator platform targeting humanoid robotics joints. What we value:
Louisville, CO30+ days ago
p>This role works cross-functionally with Engineering and Production teams to deliver robust and efficient control solutions for manufacturing and process automation for the EV cell pilot line. Ability to wear Personal Protective Equipment (PPE) as necessary including, but not limited to eye protection, hair net, gloves, face mask, coveralls, half or full-face respirator or PAPR.
Englewood, CO30+ days ago
In this role, we expect people to be willing or able to lead others who use modern tools: You are expected to lead others in taking engineering problems from issue to solution by setting expectations for using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. The Energy & Industrial Group (EIG) specializes in delivering advanced engineering solutions across various sectors, including power generation, environmental compliance, oil & gas, and industrial projects, from new plant design to plant betterment and upgrade services for operating facilities.
Englewood, CO30+ days ago
In this role, we expect people to be willing or able to lead others who use modern tools: You are expected to lead others in taking engineering problems from issue to solution by setting expectations for using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. The Energy & Industrial Group (EIG) specializes in delivering advanced engineering solutions across various sectors, including power generation, environmental compliance, oil & gas, and industrial projects, from new plant design to plant betterment and upgrade services for operating facilities.
Denver, Colorado26 days ago
p style="text-align:inherit"/>With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you. More information on our benefits and rewards can be found on our career page: https://www.idexcorp.com/careers/our-benefits-and-rewards/.
p>Were looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved - people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. Working closely with cross-functional technical leadership and managing enterprise-focused vendors, you will play a pivotal role in shaping and executing the technical strategy that directly supports our rapidly expanding greenfield projects and campuses.
Lakewood, Colorado12 days ago
This person will be a member of a team responsible for the design, implementation, and project management of large-scale capital automation projects within the Oil and Gas Industry along with other projects in Life Sciences and Building Automation industries. - 5-10 years of hands-on experience with Rockwell Automation, Honeywell, Emerson DeltaV, and similar systems, focusing on system design and project execution.
p>Primary Location: United States | AZ | Chandler Organization: BC-2243 Water-US Delivery Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 16/06/2025 05:06:49 Req ID: REQ25000194. - Bachelor of Science in Electrical Engineering, Mechanical Engineering, or Chemical Engineering is required, MS preferred, with a minimum of 15 years of experience in instrumentation and controls.
With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses (https://www.idexcorp.com/our-businesses/business-segments/) around the globe, chances are, we have something special for you. SUMMARY OF JOB RESPONSIBILITIES : A Senior Manufacturing Controls Engineer is responsible for designing, implementing, and optimizing manufacturing processes to enhance efficiency, reduce waste, and ensure high-quality production.
li>Develop control strategies for active power control (APC), reactive power control (RPC), frequency response, voltage regulation, ramp rate limiting, and state-of-charge (SOC) management for hybrid solar and storage facilities, ensuring performance under expected grid operating conditions. The position partners closely with internal teams, OEMs, EPCs, and operations stakeholders to define control strategies, evaluate designs, and support successful project execution from design through commercial operation.
p>Were looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved - people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. What You'll Be Working On:
Technical Problem-Solving: Provide high-level expertise, strategic direction, and technical support and knowledge for complex problem-solving related to the design and operation of Crusoe Power Generation Plant control systems.
Englewood, Colorado15 days ago
Englewood, CO30+ days ago
p>In this role, we expect people to be willing or able to solve problems using modern tools: - You are expected to take engineering problems from issue to solution using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Since 1954, we've been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects.
Englewood, Colorado15 days ago