1,067 Results for

Computer Aided Design Jobs in Virginia

Jobs

Winchester, VA7 days ago

However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Across the eastern seaboard, the southeast, and even as far west as Arizona, our customers rely on us to provide innovative precast solutions and the best quality for their parking structures, data centers, multifamily housing, office buildings, warehouses, schools, and stadiums.

Dam Neck, Virginia21 days ago

WR has an opportunity for a Computer/Electrical Engineer III to design, develop, test, and support complex electronic and system-level solutions, ensuring performance, reliability, and mission readiness across hardware, software, and networked environments. Autonomously design test control apparatus and equipment, determines procedures for testing products and directs engineering personnel in fabrication of test control apparatus and equipment.

New!

Richmond, Virginia3 days ago

$32–$35 Per Hour
Contractor

The specific compensation for this position will be determined by several factors, including the scope, complexity, and location of the role, as well as the cost of labor in the market; the skills, education, training, credentials, and experience of the candidate; and other conditions of employment. This role involves creating and updating drawings used in electrical construction packages, such as single lines, wiring diagrams, and plan drawings.

Dahlgren, VA26 days ago

This contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Experience should include preparing complete sets of technical drawing packages (TDP) and complex assembly drawing packages of test equipment to be manufactured from layouts, models, or engineering sketches.

Dahlgren, VA26 days ago

New!

Dahlgren, VA6 days ago

Machinist (Engineering Technician III) (EPFAB-2025-23429): Bowhead is seeking a qualified Machinist to join the Machine Shop team at the Naval Surface Warfare Center Dahlgren Division (NSWCDD) in Virginia. Machinists are required to program and operate both CNC lathes/mills, set tools in the machines, and create fixtures to hold uniquely shaped parts/components.

Norfolk, VA29 days ago

This person has responsibility for working with Application Services and IT team to ensure enterprise applications operate in a manner that enables HRT staff to meet organizational goals for increased ridership and improved operational efficiency. This person must take a broad, cross-departmental view of the organization, understand transit, organizational and departmental policies, processes and procedures to leverage system capabilities and promote effective use of the enterprise applications to meet organization goals and needs .

New!

Chantilly, Virginia1 day ago

Contractor

You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.

New!

Hampton, VA1 day ago

$35–$45 Per Hour

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Founded over 50 years ago and based in Hampton, VA, we are a full-service precision manufacturing company known for delivering exceptional results on everything from small precision components to large-scale industrial projects.

New!

Herndon, VA5 days ago

$125,000–$175,000 Per Year

Typical duties include writing technical reports, conducting surveys, performing calculations, overseeing, and completing power, telemetry, and telecommunications designs, conducting research and development, systems integration, testing, hands-on assembly, and PLC programming. Seeking a Sr Electrical Engineer to serve as the electrical discipline team leader for the project, directing other engineers and designers as required, provide electrical design expertise and leadership for the entire project, from initial survey through final inspection.

New!

Norfolk, VAToday

$80,000–$140,000 Per Year

A dynamic leader in construction management focused on innovation, collaboration, quality delivery, and meaningful impact through design-build, virtual construction, green building, and public-private partnerships. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.

New!

Norfolk, VA6 days ago

$80,000–$140,000 Per Year

Reston, Virginia30+ days ago

Contractor

Proven ability to work effectively in a hybrid work environment Desired Qualifications: * Experience with bare die techniques such as wire bond, flip chip, and interposer design * Formal education in electronics or electrical circuit theory is a significant benefit. * AutoCAD * Downstream CAM350 * SolidWorks Required Qualifications: * Associates degree or certificate from a two year technical school in an applicable discipline or demonstrated equivalent knowledge and skills.

New!

Dahlgren, VA6 days ago

Machinist (Engineering Technician IV) (EPFAB-2026-24702): Bowhead is seeking a qualified Machinist to join the Machine Shop team at the Naval Surface Warfare Center Dahlgren Division (NSWCDD) in Virginia. Machinists are required to program and operate both CNC lathes/mills, set tools in the machines, and create fixtures to hold uniquely shaped parts/components.

Norfolk, VA29 days ago

$70,000–$70,000 Per Year

Maintains good public relations; Enforces HRT rules, policies and procedures to ensure safety and quality of service; Participates in staff meetings and attends other meetings, training sessions and seminars as required; Answers inquiries about transportation services, routes, schedules, stop locations; Investigates and follows up on complaints; Investigates and responds to Accidents and Incidents; Meets with City and public officials to develop plans and schedules for street closures, detours and new developments as assigned. Under general supervision, the Transportation Supervisor coordinates and directs the movement of Hampton Roads Transit public transit vehicles through the supervision of operators, radio and/or division dispatchers, and support personnel; monitors, coordinates, and directs the activities of the communication control center; and performs supervisory and administrative activities at transit operating divisions.

Dam Neck, Virginia21 days ago

The selected candidate will be required to pass a pre-employment third-party background check which may include verification of any of the following: Employment history; Education and/or certifications; Criminal history; Driving Records; Other records or information related to the candidate’s suitability for the position. Experience working with CAD software (AutoCAD and Autodesk Inventor preferred) with strong knowledge of 3D modeling, Bills of Materials (BOM), and manufacturing documentation.

Hampton, VA8 days ago

$190,000–$215,000

This role provides hands‑on technical leadership across multiple platform areas—including ITSM, ITOM, ITAM, IRM, SecOps, HRSD, and App Engine—ensuring scalable, secure, and compliant delivery aligned with federal and DoD requirements. Overview: GovCIO is currently hiring for a ServiceNow Certified Technical Architect to lead the architecture, design, and implementation of enterprise scale ServiceNow solutions in support of a USAF program.

New!

Dahlgren, VA6 days ago

H40/60 FSR and Tech Support Landing Page (H40/60-2025-22405): Bowhead is seeking to network with individuals to join our team for our proposal effort to provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Our team will focus on designing, developing, and integrating innovative weapon control systems, detection systems, and sensory technologies for the warfighter, enhancing the operational capabilities of tactical systems.

Norfolk, VA30+ days ago

Full-time

Under general supervision, the Transportation Supervisor coordinates and directs the movement of Hampton Roads Transit public transit vehicles through the supervision of operators, radio and/or division dispatchers, and support personnel; monitors, coordinates, and directs the activities of the communication control center; and performs supervisory and administrative activities at transit operating divisions. This position may be assigned to one of three functional areas (Radio Communications Center, Transit Operating Division Dispatcher, or the field) within Transportation.

Sterling, VA18 days ago

$40–$50 Per Hour
Full-time
Employee

Job Details:Role: CNC MachinistLocation: Sterling, Virgina (On-site) Duration: 12+ Months ContractJob Summary:We are seeking a CNC Machinist on behalf of Matsys, The CNC Machinist is responsible for setting up and operating CNC machines to produce high-quality precision components according to engineering drawings and specifications. This role requires hands-on machining expertise, strong attention to detail, and the ability to maintain tooling, equipment, and process documentation to meet tight tolerances, deadlines, and customer requirements, often in support of defense projects.

New!

Toano, VA6 days ago

Chantilly, Virginia30+ days ago

$40–$50 Per Hour
Contractor

Project Management: Plan and manage electrical engineering projects, including creating project timelines, allocating resources, and coordinating with cross-functional teams. Collaboration: Collaborate with other engineers, technicians, and professionals to integrate electrical systems into larger projects or products.

Mechanicsville, VA28 days ago

$0.75–$1.25 Per Hour

The Control Systems Engineer is crucial in designing, developing, installing, and maintaining equipment used for monitoring and controlling facilities (BMS) systems, microgrids, machinery, and SWGR across many different Power System Applications, including industrial controls, power controls, protection, and EV control systems. The individual in this role is responsible for planning, designing/engineering, coordinating and working with project leads to ensure development and implementation of efficient control operations and cost-effective systems to meet current and future needs of the organization.

Dahlgren, VA11 days ago

Remote

Experience managing the development of Interface Control Documents (ICDs) for the mechanical hardware design and ensuring there is traceability to the Directed Energy Weapons (DEWS) Reference Architecture (RA). Bowhead seeks to network with a Mechanical Engineer to join our team at the Naval Surface Warfare Center in Dahlgren, VA for future or potential upcoming requirements.

New!

Wattsville, VA1 day ago

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.

New!

Fairfax, VA6 days ago

$90,000–$140,000 Per Year

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Ideal candidates will have experience with engineering consulting firms, electrical power, lighting, fire alarm, and building systems for institutional and commercial buildings, as well as proficiency in Revit and AutoCAD.

New!

Norfolk, VA1 day ago

The Manufacturing Engineer will support the evaluation, repair, overhaul and test of surface and subsurface military circuit breakers and various electronic equipment in support of the Naval Nuclear Propulsion Program. To be eligible, applicants must be pursuing a Bachelor’s Degree in Electrical Engineering (BSEE) or Electrical Engineering Technology (BSEET) or have completed their Bachelor’s degree within the last 12 months, regardless of age.

Norfolk, Virginia7 days ago

Clearance Requirement: Active Secret Clearance is required to startTravel Requirements: Up to 20%Location: Norfolk, VASUMMARY: WR has an opportunity for an RF Engineer, Lead to support the design, analysis, testing, and integration of RF systems and technologies. The selected candidate will work independently on complex engineering assignments, support system verification and validation activities, and may serve as a technical lead for project tasks and junior engineering personnel.

Dam Neck, Virginia21 days ago

SUMMARY: WR has an opportunity for an Electrical Engineer III conduct research, development, design, integration, and testing of electrical components, equipment, and systems supporting advanced naval technologies and engineering development efforts. Position responsibilities will include, but are not limited to the following: Independently design electronic circuits, components, and integrated systems utilizing ferroelectric, nonlinear, dielectric, phosphorescent, photo-conductive, and thermoelectric material properties.

Dahlgren, VA18 days ago

Machine Shop Inspector/Machinist (Engineering Technician IV) (EPFAB-2026-25365): Bowhead is seeking a Machine Shop Inspector/Machinist to support the Engineering/Prototype shop at the Naval Surface Warfare Center Dahlgren Division (NSWCDD) who is also an experienced CNC Machinist/Programmer. Candidates need to be proficient with 3D CAD software (SolidWorks preferred) and able to use precision measuring tools such as micrometers, calipers, and height gauges accurately.

Dam Neck, Virginia21 days ago

Developing complete drawing packages (Level-3 drawings, block diagrams, Bills of Materials [BOM], manufacturing, assembly, modeling, renderings, and installation) using Autodesk Inventor 3D. The selected candidate will be required to pass a pre-employment third-party background check which may include verification of any of the following: Employment history; Education and/or certifications; Criminal history; Driving Records; Other records or information related to the candidate’s suitability for the position.

Norfolk, Virginia21 days ago

Determine feasibility of designing new components or modifying existing components considering costs, available space, time limitations, planning, and other technical and economic factors. · Develop drawing packages (Level-3 Drawings, block diagrams, Bills of Materials [BOM], manufacturing, assembly, modeling, renderings and installation) using Autodesk Inventor 3D.

New!

Sterling, VA6 days ago

Roanoke, VA7 days ago

Remote

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities.

New!

Sterling, VA4 days ago

$95,000–$95,000 Per Hour

3+ years of experience operating CNC machines in a precision (metal part) manufacturing environment (aerospace or defense experience desirable) . Frequent exposure to powders, dust, lubricants, and manufacturing equipment Use of PPE such as gloves, masks, safety shoes, and protective eyewear .

Chester, VA7 days ago

Dover Food Retail (DFR) is a leading manufacturer of Display Cases, Specialty Products, Refrigeration Systems, Power Systems and Comprehensive Services; and leading our industry by Innovating What’s Next in glass doors and intelligent merchandising technologies that keep food safe under brands such as HillPhoenix and Anthony. Evaluates capital equipment investments, coordinates obtaining quotes, prepares cost justifications and manages the overall implementations and success of capital equipment projects.

Lorton, VA7 days ago

$131,300–$237,350

Leidos is seeking an experienced ServiceNow Software Development Manager, to join an internal service center group under the Digital Modernization Sector and the Repeatable Offerings organization, who will support ServiceNow self-hosted/on-prem implementations and best practices for our Federal Government customers. You will collaborate with a diverse workforce within a matrix environment and be able to communicate effectively by obtaining and synthesizing requirements from internal and external stakeholders, while working with the team to deliver a ServiceNow implementation that meets our customers’ needs.

Norfolk, Virginia21 days ago

Candidates must possess the following knowledge, skills, and experience:Bachelor of Science degree in Electrical/Electronics Engineering, Computer Engineering, Physics, Math, or related scientific discipline . The selected candidate will be required to pass a pre-employment third-party background check which may include verification of any of the following: Employment history; Education and/or certifications; Criminal history; Driving Records; Other records or information related to the candidate’s suitability for the position.

Arlington, VA7 days ago

COMPANY’s Special Projects group supports U.S. Government agencies with A/E, defense, design/build, classified, and environmental programs. Develop conceptual and detailed ICT/telecom designs including drawings, specifications, and analyses.

New!

Suffolk, VAToday

$34.82–$39.94 Per Hour

Assist in designing various civil projects including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design. An Assistant Structural Revit Designer will assist in various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team.

New!

Fredericksburg, VA3 days ago

$1,930–$1,930

Job Title: Registered Nurse Profession: RN Specialty: Labor & Delivery Duration: 13 weeks Shift: Night Hours per Shift: 12 Experience: Minimum 2 years License: RN License required Certifications: NRP, BLS Must-Have: Strong communication skills Description: The unit includes a total of 10 labor delivery rooms, 3 triage areas, and 2 operating room suites. The equipment utilized includes GE monitoring systems, Novii Wireless monitoring, Spectrum IV pumps, and CADD epidural PCA.

New!

NORFOLK, VA3 days ago

$2,435–$2,586

You will care for patients with heart failure, ventricular assist device (VAD) complications, NSTEMI and coronary artery disease, arrhythmias, transplant rejection, pulmonary arterial hypertension, hypoxic respiratory failure, gastrointestinal bleeding, renal failure, and sepsis. Progressive care nurse, PCU RN, PCU, progressive care, progressive care unit, patient care, PCU nurse, nurse, nursing, RN, R.N., registered nurse, healthcare, health care, hospital, step down nurse, telemetry nurse, ER holding

New!

Richmond, VA3 days ago

$2,006–$2,006

Job Title: Registered Nurse Profession: RN Specialty: Endoscopy Duration: 13 weeks Shift: 07:00 - 17:00 Hours per Shift: 36 Experience: Minimum of 2 years License: RN License Required Certifications: Required Must-Have: Ability to perform advanced procedures such as ERCP and EUS. Any additional attractive features for prospective candidates include new equipment or technology, the extensive tenure and experience of staff, and schedule options.

Leesburg, VA8 days ago

$70–$90 Per Hour

Develop, configure, and maintain ServiceNow applications with emphasis on Service Catalogs and Request Workflows within ITSM and HRSD modules. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America.

New!

Leesburg, VA1 day ago

$63,426.89–$76,364.15 Per Year

Considerable ability to deal effectively with the public and special interest groups, and to provide a strong positive public relations program; with considerable ability to interpret and explain NOVA Parks policies, rules, and procedures to employees and to the public. Experience: Three years of progressively responsible experience as special events coordinator, or any equivalent combination of education, training, or experience which provides: Ability to work a flexible schedule including most weekends and evenings.

New!

Hampton, VAToday

Description: The Staff Civil Site Engineer will work on project teams to create world class site designs for new projects, alterations, and redevelopments on a variety of projects including pipelines, airports, institutional, industrial, manufacturing, municipal, commercial, and government facilities. Qualifications:Bachelor’s degree in civil engineering or related degree from an ABET accredited program and 3 years of civil engineering experience, consulting preferred – OR – Master’s degree in civil engineering and 2 years of civil engineering experience, consulting preferred.

Richmond, VA8 days ago

Comprehensive Due Diligence: Directs investigative efforts for potential transactions, including Fair Market Value (FMV) assessments, environmental reviews, surveys, zoning analysis, and title encumbrances to ensure informed decision-making. Casualty Loss & Recovery Management: Directs the response to property damage events (fire, flood, etc.) by coordinating with landlords, risk management, and insurance adjusters to ensure timely restoration of healthcare operations.

Alexandria, VA7 days ago

Remote

$73,450–$132,775

Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.

New!

Norfolk, VA6 days ago

$3,264–$3,264

Vascular Interventional Technologist, Vascular Experience: 2 years Certifications: CV-ARRT SSN Required DOB Required Candidate needs VA license, ARRT, ACLS are required Experience with Xper/Monitor Neuro, vascular, and interventional techs to support our VIC/IR lab If VIT, Charting system: XPER Top 10 Diagnosis: CAD, MI, CHF Top Procedures: Diagnostic/Interventional Caths, CTO caths, BAVs, TAVR, Mitralcips, Watchman, Biopsies, RHC, ASD and PFO Closures Common Equipment: Xper, Phillips monitors, Intracardiac Echo, impeller, shockwave, IABP, IVUS, TAVR Valves, Laser, cardiomems Managers on hiring process: Need to be involved to assess skills of tech. Candidate needs VA license, ARRT, ACLS are required Experience with Xper/Monitor Neuro, vascular, and interventional techs to support our VIC/IR lab If VIT, Charting system: XPER Top 10 Diagnosis: CAD, MI, CHF Top Procedures: Diagnostic/Interventional Caths, CTO caths, BAVs, TAVR, Mitralcips, Watchman, Biopsies, RHC, ASD and PFO Closures Common Equipment: Xper, Phillips monitors, Intracardiac Echo, impeller, shockwave, IABP, IVUS, TAVR Valves, Laser, cardiomems Managers on hiring process: Need to be involved to assess skills of tech.

New!

Norfolk, VA6 days ago

$3,264–$3,264

Stand out to leading employers.

Upload your resume and let employers find you for new Computer Aided Design job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Computer Aided Design Jobs in Virginia

Project Drafter Metromont

Computer/Electrical Engineer III WR Systems

Design Draftsman Pinnacle Technical Resources

Drafter/CAD Operator IV Bowhead / UIC Technical Services

Drafter/CAD Operator III Bowhead / UIC Technical Services

Machinist (Engineering Technician III) Bowhead / UIC Technical Services

Application Administrator Hampton Roads Transit

Manufacturing Engineer II (VA) GCR Professional Services

CNC Programmer Jobot

Sr Electrical PE Jobot

Construction Superintendent Jobot

Construction Project Manager Jobot

PCB Designer GCR Professional Services

Machinist (Engineering Technician IV) Bowhead / UIC Technical Services

Bus Transportation Supervisor $5,000 Sign on Bonus Hampton Roads Transit

Mechanical Engineer III WR Systems

ServiceNow Certified Technical Architect Govcio LLC

H40/60 FSR and Tech Support Landing Page Bowhead / UIC Technical Services

Bus Transportation Supervisor Hampton Roads Transit

CNC Machinist Creative Global Consulting, LLC

Survey CAD Technician Davron LLC

Electrical Engineer II (VA) GCR Professional Services

CONTROL SYSTEMS ENGINEER Carter Machinery Company, Inc

Mechanical Engineer Bowhead / UIC Technical Services

Ground Systems Engineer II/Senior - Fluids Rocket Lab

Electrical Engineer EIT/PE Jobot

Associate, Manufacturing Engineering (Electrical) L3Harris Technologies

RF Engineer, Lead WR Systems

Electrical Engineer III WR Systems

Machine Shop Inspector/Machinist (Engineering Technician IV) Bowhead / UIC Technical Services

Mechanical Engineer, Senior WR Systems

Mechanical Engineer, Lead WR Systems

AutoCAD Draftsman Davron LLC

Power Distribution and Make Ready Designer (Remote) Sigma Technologies, Ltd.

CNC Machinist System One

Senior Manufacturing Engineer - Fabrication Dover Food Retail

ServiceNow Development Manager Leidos

RF Engineer WR Systems

Federal Telecommunications Engineer (RCDD) Levi Hunter

Assistant Structural Revit Designer (35190) STSI (Staffing Technical Services Inc.)

Travel Nurse RN - Labor & Delivery - $1,930 per week in Fredericksburg, VA TravelNurseSource

Travel Nurse RN - Progressive Care Unit - $2,435 to $2,586 per week in Norfolk, VA TravelNurseSource

Travel Nurse RN - Endoscopy - $2,006 per week in Richmond, VA TravelNurseSource

ServiceNow Consultant System One

Facility and Event Sales Manager NOVA Parks

Staff Civil Site Engineer (34777) STSI (Staffing Technical Services Inc.)

Real Estate Transaction Manager VCU Health

Senior Transmission Line Engineer Leidos

Travel Interventional Radiology (IR) - $3,264 per week in Norfolk, VA AlliedTravelCareers

Travel Interventional Radiology (IR) - $3,264 per week in Norfolk, VA Aequor

Similar Job Searches