April 29, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Bachelor’s degree in Electrical Engineering required with eight plus years of experience in electrical operation, maintenance and/or design of power generation and substation assets or similar experience, including specific knowledge of AC and DC electrical systems, controls, and protection relaying.
p>Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. We are seeking a motivated Component Engineer to join our team of forward-thinking experts dedicated to advancing the performance and reliability of Electrical, Electronic, Electromechanical, and Electro-optical (EEEE) components.
Basic Qualifications: Formal coursework, training, experience and/or knowledge in the design, analysis, and/or construction of electrical parts and circuits, semiconductor physics and/or operation of devices such as hybrids, integrated circuits, transistors, diodes and capacitors. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $85,500 - $150,765.
Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $85,500 - $150,765. Work on electrical components such as resistors, capacitors, diodes, integrated circuits (ICs), hybrids, crystals, crystal oscillators, filters, fuses, heaters, magnetics, microcircuits, relays, semiconductors, thermistors.
Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $70,100 - $123,625. Work on electrical components such as resistors, capacitors, diodes, integrated circuits (ICs), hybrids, crystals, crystal oscillators, filters, fuses, heaters, magnetics, microcircuits, relays, semiconductors, thermistors.
p>Basic Qualifications: - Formal coursework, training, experience and/or knowledge in the design, analysis, and/or construction of electrical parts and circuits, semiconductor physics and/or operation of devices such as hybrids, integrated circuits, transistors, diodes and capacitors.
Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $70,100 - $123,625.
li>Familiarity with military specifications and engineering requirements, such as Mil-STD-883 - Microcircuits, Mil-STD-750 for Transistors, Mil-PRF-123 for Ceramic Capacitors, Mil-PRF-19500 for Diodes, Mil-PRF-38534 for Hybrids, Mil-PRF-55342 for Resistors, Mil-PRF-55365 for solid Tantalum Capacitors. Basic Qualifications:
- Formal coursework, training, experience and/or knowledge in the design, analysis, and/or construction of electrical parts and circuits, semiconductor physics and/or operation of devices such as hybrids, integrated circuits, transistors, diodes and capacitors.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $85,500 - $150,765. We are seeking a motivated Component Engineer to join our team of forward-thinking experts dedicated to advancing the performance and reliability of Electrical, Electronic, Electromechanical, and Electro-optical (EEEE) components.
We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. This role will partner closely with engineering, sourcing, quality, and suppliers to ensure component reliability, availability, and regulatory compliance in a high-tech manufacturing environment.
The engineer will provide power distribution designs, use associated electrical modeling software, and assist other engineers, project managers, and the facilities CAD team to ensure that the project electrical design and associated construction documentation conform to NLR's requirements and applicable building codes. NLR takes into consideration a candidate's education, training, and experience, expected quality and quantity of work, required travel (if any), external market and internal value, including seniority and merit systems, and internal pay alignment when determining the salary level for potential new employees.
With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Work Environment / Environmental Factors:
Environmental factors mostly consist of work being conducted in an indoor office environment, but is not limited to extreme temperatures (e.g., cold, heat), fumes, variable weather conditions, outdoor work, and noise due to some travel & work on worksites.
Equipment includes rotating machines such as generators and motors, solar photovoltaic panels, inverters, energy storage systems such as batteries, large power transformers, generator circuit breakers, isolated phase bus, duct, non-segregated phase bus, duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. As a Senior Lead Electrical Engineer, you will lead project teams to create world-class designs for both new and retrofit projects on a variety of projects.
Denver, Colorado30+ days ago
Prepare key electrical documentation including single line diagrams, wiring schematics, datasheets, vendor squad checks, procurement documentation, and reports related to electrical system studies (e.g., short circuit calculations, time-current coordination, load flow, motor starting, and harmonic analysis using SKM and ETAP software). With power requirements ranging from 100MW to 2,000MW, we are seeking Electrical Engineers with experience in the design of high-voltage power generation systems utilizing turbine generators in conjunction with grid connections as well as power distribution to support data center loads .
Preferred Qualifications: • Professional Engineer (PE) Registration • 10+ years experience in designing building electrical systems • Strong electrical code knowledge including National Electric Code (NEC), Washington State Energy Code (WSEC), Unified Facilities Criteria (UFC), ASHRAE and International Energy Conservation Code (IECC). About Buildings + Places: Our Buildings + Places practice includes architecture, interiors, building and system engineering, urbanism, planning and landscape design, strategy +, economics, technology solutions, asset advisory, and cost and program management.
You will work cross-functionally with teams in mechanical engineering, software development, quality assurance, new product development, and manufacturing to drive projects from concept through commercialization, with a focus on technology development. Description:As a Senior Electrical Engineer, you will serve as a technical leader and expert in designing, developing, and integrating complex electrical systems for company's Surgical Innovations products.
This role contributes to system architecture, supports product development, and collaborates across engineering, manufacturing, and service teams to ensure robust and scalable solutions. The employee will be required to wear all appropriate safety equipment including but not limited to eye protection, gloves, steel-toed shoes, lab coat, and around certain equipment, a hard hat.
li>Design and manage the data center white space, including rack layout, hot/cold containment, network infrastructure, branch circuit distribution, power requirements, cable pathways, and projected build phases. Headquartered in Redwood City, CA, SB Energy develops, builds, owns & operates some of the largest and most technically advanced energy and data center infrastructure projects in the United States.
Englewood, CO30+ days ago
Provide reports to the Project Manager about status of assignment(s) with respect to project milestones, schedule, budgets, delays and adverse problems, Assists with the development of manpower, man-hour, and labor cost requirements for a project and can monitor them to aid in evaluating budget limitations, Takes the lead on estimating tasks and performs material take-offs for a specific discipline, Ensure quality, quantity and completeness of the assigned engineering tasks, Adjusts project milestones schedules as required. a.)Have technical expertise to review and approve Electrical engineering calculations and drawings in the area of:power distribution equipment, power system short circuit, load flow, one-line diagrams, cable ampacity calculations, cable schedules, cable and raceway routing, schematics and wiring diagrams, grounding, lightning and lighting drawings, E-House layout drawings and heat loss calculations, procurement specifications, material requisitions and technical bid analysis.
p>The Assistant Electrical Engineer will assist project teams to create world-class designs for new projects, alterations, and redevelopments on a variety of projects including power, process, corporate, healthcare, airports, institutional, industrial, manufacturing, government, and military facilities. Assists with modifying and reviewing production drawings for a variety of projects including but not limited to power plants, process facilities, industrial facilities, healthcare facilities, airports, educational institutions, commercial, and governmental and military facilities.
Accredited four (4) year degree or global equivalent in engineering field of study and five (5) years of work-related experience; a recognized professional certification or registration in the applicable field, if required; some locations may have additional or different qualifications in order to comply with local requirements. Assist in developing capital project programs for new equipment and major repairs; assist in the coordinate of manufacturing, construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, NFPA codes, UFC, and customer requirements.
Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program. Utilize AutoCAD, Revit, and other electrical design platforms to develop detailed models, layouts, and construction drawings for modular power systems, ensuring design accuracy, coordination, and manufacturability.
p>Seeking a Senior Electrical Engineer to design, develop, test, and maintain mixed-signal medical device electronics for Surgical Innovations products (Energy Generators, Lung Health, GYN). - Mixed-Signal Electrical Design
- System architecture, schematic design, PCB layout, component selection, design verification.
Broomfield, CO28 days ago
The electrical engineer identifies creative solutions, performs engineering analysis, creates designs and settings, oversees verification, and contributes to the implementation of product cost savings, product improvements, and engineering process improvement projects. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Work Environment / Environmental Factors:
Environmental factors mostly consist of work being conducted in an indoor office environment, but is not limited to extreme temperatures (e.g., cold, heat), fumes, variable weather conditions, outdoor work, and noise due to some travel & work on worksites.
p>Design and layout of power plant site microgrids and power distribution with medium and low voltage systems switchgear and motor control centers computer modeling analysis of electrical systems convenience power lighting systems grounding and lightning protection systems. However employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information unless the disclosure is a in response to a formal complaint or charge b in furtherance of an investigation proceeding hearing or action including an investigation conducted by the employer or c consistent with the contractors legal duty to furnish information.
p>Key Responsibilities Electrical Engineering • Lead the development and review of comprehensive electrical drawing packages including • One-line diagrams • Electrical area classification plans • Grounding layouts • Lighting plans • Raceway-conduit routing plans • Conduit and cable schedules • Power plans • Equipment layouts • Interconnection diagrams • Select specify and review electrical equipment including • Switchgear • MCCs • VFDs • Transformers • UPS • PDCs • Power panels • Perform and oversee electrical system studies including • Load flow • Short circuit • Arc-flash • Coordination using ETAP or SKM • Execute and validate electrical calculations e.g. Microsoft Office Suite • Excellent written and verbal communication skills • Experience with leading the discipline design for large projects and delegating work tasks to team members • Ability to lead execution of work and resolve issues in a team environment • Demonstrated critical thinking skills ability to work methodically and analytically in a quantitative problem-solving environment • Strong attention to detail facilitation team building collaboration organization and problem-solving skills • Ability to perform quality reviews for detailed engineering documents and specifications • Ability to travel • Professional Engineer PE License Preferred.
This role also offers career growth opportunities for managing electrical and/or I&C-specific projects as well as participating in projects utilizing various delivery methods to create world-class designs meeting our client's needs. From conceptual phase through completion, the Senior Electrical Engineer will lead in the execution of complex projects requiring the use of advanced techniques for the preparation of plans, specifications, cost estimates, and studies from inception to completion.
Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Assist in developing capital project programs for new equipment and major repairs; assist in the coordinate of manufacturing, construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, NFPA codes, UFC, and customer requirements.
Centennial, CO30+ days ago
Preferred Qualifications: • An active Top Secret with SCI eligibility U.S. Security Clearance is preferred • Extensive experience serving as a Responsible Engineer (RE), driving hardware through its lifecycle, including development, qualification, integration & Test, Verification & Validation, and certification • Experience with Electrical Architecture • Proficiency in electrical design software such as Capital, AutoCAD Electrical, Altium Designer, or similar tools • Experience with simulation software like SPICE, MATLAB/Simulink, Hyperlynx or similar • Expertise in PCB design and layout • Advanced understanding of power electronics and control systems • Extensive experience with microcontrollers and embedded systems • Ability to perform advanced circuit analysis and troubleshooting using tools like oscilloscopes, multimeters, and logic analyzers • Proficiency in programming languages such as C/C++ or Python for embedded systems development • Familiarity with CCSDS specifications for spacecraft and ground data flow • Proven experience in project management and the ability to lead large and complex projects • Strong leadership, communication, and interpersonal skills. Responsibilities include: • Leading advanced projects • Collaborating with a diverse team of engineers and technicians • Contributing to the development of innovative solutions • Mentoring less experienced engineers and technicians • Acting as the technical lead for specialized projects • Staying updated with the latest advancements in electrical engineering.
Louisville, CO30+ days ago
p>Primary Responsibilities: • Harness Design (2D) for harnessing on satellite programs to meet requirements • Propose innovative solutions to design challenges • Attend and actively participate in cross-functional meetings • Communicate and collaborate with the team to ensure the integrity of harness designs meets specifications and requirements. The role also involves mentoring junior engineers and technicians, acting as the Responsible Engineer (RE) for discrete technical packages, and staying updated with the latest advancements in electrical engineering.
Englewood, CO30+ days ago
div> Electrical Engineer II Englewood, CO 1 Opening Pay:$41 6-12 months+ research, design, develop, test, certify, deploy and improve cutting edge products and services. |
| Education: | Must-haves: Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 2 or more years of relevant experience. Englewood, CO30+ days ago You''ll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems. Working Conditions: Rarely exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.) Rarely exposed to fumes or hazardous chemicals/materials. There are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. Working under general direction, this role independently develops design approaches, performs verification and testing, and collaborates across disciplines to ensure product capability, manufacturability, and system-level performance. Equipment includes rotating machines, such as generators and motors, solar photovoltaic panels, inverters, energy storage systems, such as batteries, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. Bachelor's degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience, consulting preferred required. Equipment includes rotating machines, such as generators and motors, solar photovoltaic panels, inverters, energy storage systems, such as batteries, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. Apply strong knowledge of commonly used electrical engineering/design concepts, principles, practices, codes, and procedures within the electrical engineering services industry. Englewood, CO30+ days ago Ability to perform complex engineering calculations, including load flow, short circuit, harmonics, equipment sizing, large motor starting, grounding, transient stability, electromagnetic transients, and insulation coordination. You will play a critical role in driving innovation, efficiency, and excellence across medium and large-sized projects while mentoring and guiding the electrical team. p>Electrical Engineer responsible for a variety of engineering tasks in the initial planning through final design for projects of advanced complexity under the supervision of a Supervising Electrical Engineer. The Engineer is responsible for initiating and developing engineering calculations, studies and drawings through completion in conformance with the requirements, applicable codes, and design criteria established by the project. Englewood, Colorado4 days ago p>Electrical Engineer responsible for a variety of engineering tasks in the initial planning through final design for projects of advanced complexity under the supervision of a Supervising Electrical Engineer. The Engineer is responsible for initiating and developing engineering calculations, studies and drawings through completion in conformance with the requirements, applicable codes, and design criteria established by the project. Denver, Colorado15 days ago div class="job__description body">BRPH is a technically focused, creative architecture, engineering, and construction company with over six decades of expertise in helping mission-driven clients in the aerospace, defense, manufacturing, commercial, education, entertainment, hospitality, and federal markets identify gaps in their program delivery and develop innovative solutions to their most challenging problems across the U.S. and around the world. Prepare load calculations, specify and layout electrical equipment, and perform power, lighting, lighting controls, grounding, lightning protection, communication, and fire alarm system design, and produce construction documents using REVIT. p>The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. Englewood, CO30+ days ago You will coordinate with vendors and cross-discipline teams to ensure harmonized design efforts, prepare precise technical specifications, and support the mentoring of junior engineers to foster a high-performance team environment. Your responsibilities will include leveraging your technical acumen to guide a talented team toward innovative project outcomes, assessing and coordinating staffing needs, and managing project phases to align with strict budgetary guidelines. Englewood, CO30+ days ago Working Conditions: Rarely exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.)Rarely exposed to fumes or hazardous chemicals/materials. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems. Denver, Colorado24 days ago Hiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE’s Generally Authorized Destinations List: https://www.ecfr.gov/current/title-10/chapter-III/part-810/appendix-Appendix%20A%20to%20Part%20810. Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110. Golden, Colorado8 days ago Job Profile: Professional III / Annual Salary Range: $83,600 - $150,500NLR takes into consideration a candidate’s education, training, and experience, expected quality and quantity of work, required travel (if any), external market and internal value, including seniority and merit systems, and internal pay alignment when determining the salary level for potential new employees. E-Verifywww.dhs.gov/E-VerifyFor information about right to work, click here for English orhere for Spanish. |