Senior Hardware Design Engineer Broadata CommunicationsSenior Hardware Design EngineerTorrance, CA$130,000–$180,000 / yearExperience interfacing with microcontrollers, application processors, FPGAs/CPLDs, video scalers, video receivers/transmitters, Ethernet PHYs/switches, high-speed memory, and common communication interfaces such as I2C, SPI, UART, RS-232, RS-485, USB, SDIO, Ethernet, and PCIe. Demonstrated experience designing complex multi-layer PCBs with controlled impedance, differential pairs, high-speed connectors, high-density components, power distribution, grounding, shielding, EMI/ESD protection, and manufacturability constraints.
RF Systems Engineer II InversionRF Systems Engineer IICulver City, CA$106,000–$150,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Perform trade studies to evaluate, select, and qualify commercial off-the-shelf (COTS) and custom RF components, including transmitters, transceivers, Power Amplifiers (PAs), Low Noise Amplifiers (LNAs), and antennas.
Propulsion and Energetics Test Engineer II InversionPropulsion and Energetics Test Engineer IILos Angeles, CA$106,000–$150,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. This role will focus on propulsion and thermal protection system test stand fabrication and maintenance, post-test data processing, and a broad range of additional ground test activities for reentry vehicles.
Staff Optical Engineer InversionStaff Optical EngineerPlaya Vista, CA$161,000–$221,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will lead the development of sensor windows, seeker architectures, and a variety of spectral camera systems from early trades through analysis, integration, and test.
Senior Opto-Mechanical Engineer (High-Power Lasers) FreeformSenior Opto-Mechanical Engineer (High-Power Lasers)Los Angeles, CA$120,000–$200,000 / yearYou will fully own the design of custom hardware and opto-mechanical-electrical devices, as well as implement novel laser and camera solutions to enable sophisticated closed loop control. As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process.
Senior Avionics Engineer InversionSenior Avionics EngineerPlaya Vista, CA$137,000–$193,000 / yearKnowledge of common spacecraft ADCS sensors and propulsion components (star trackers, reaction wheels, thermocouples, resistance temperature detectors (RTDs), pressure transducers, solenoid valves, etc.). ITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Generative Spacecraft Engineer - Systems Oligo SpaceGenerative Spacecraft Engineer - SystemsHawthorne, California$110,000–$164,000 / yearYou will work closely with senior engineers across disciplines to gain exposure to the full spacecraft lifecycle while contributing directly to real hardware and mission success: Support the design of spacecraft mechanical and electrical subsystems, including structures, harnessing, propulsion, avionics integration, and thermal management. Leveraging cutting edge AI-driven generative design and automated manufacturing , our ex-MIT, Harvard, and NASA JPL team work to create the most advanced payload-specific spacecraft at scale in weeks over months.
Guidance, Navigation and Control (GNC) Engineer Space KineticGuidance, Navigation and Control (GNC) EngineerEl Segundo, California$115,000–$165,000 / yearITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster.
Senior DeltaV Control Engineer AutomationtechiesSenior DeltaV Control EngineerLos Angeles, CAWith over 40 successful years in business and having over 35 facilities across the USA this engineering firm has been named on the ENR Top 500 Design Firm list and has continued to climb in rank over the years. The ideal candidate will have a proven track record of managing full project life cycles, ensuring compliance with industry regulations, and collaborating with cross-functional teams to optimize biopharmaceutical and medical device manufacturing processes.
NewSenior Harness Design Engineer Vast SpaceSenior Harness Design EngineerLong Beach, CA$135,000–$190,000 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Develop system logic and control architectures, creating interface control documents (ICDs) and performing electrical analysis to ensure compatibility between subsystems, including power budgeting, load analysis, and signal routing optimization.
Principal Spacecraft GNC Engineer Apex SpacePrincipal Spacecraft GNC EngineerLos Angeles, CAYou will work with all facets of the engineering life cycle: spacecraft concept and algorithm development, flight software implementation, subsystem requirements development, detailed GNC design, subsystem integration & test (I&T), and vehicle I&T. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses.
NewAssociate Applications Engineer OSI Systems, IncAssociate Applications EngineerHawthorne, California$33.65–$37.50 / hourhas three operating divisions: (a) Security, providing security and inspection systems, turnkey security screening solutions and related services; (b) Healthcare, providing patient monitoring, diagnostic cardiology and anesthesia systems; and (c) Optoelectronics and Manufacturing, providing specialized electronic components and electronic manufacturing services for original equipment manufacturers with applications in the defense, aerospace, medical and industrial markets, among others. They will also supports prototype builds and production transfer by developing test/assembly procedures, providing technical customer support, collaborating with Test Engineering and QA on application-specific concerns, and helping develop new catalog products and qualify vendors for OSM requirements.
NewSr. Quality Engineer OSI Systems, IncSr. Quality EngineerHawthorne, California$120,000–$130,000 / yearhas three operating divisions: (a) Security, providing security and inspection systems, turnkey security screening solutions and related services; (b) Healthcare, providing patient monitoring, diagnostic cardiology and anesthesia systems; and (c) Optoelectronics and Manufacturing, providing specialized electronic components and electronic manufacturing services for original equipment manufacturers with applications in the defense, aerospace, medical and industrial markets, among others. If any person or entity, including a recruiter or agency, submits any information, including any resume or information regarding any potential candidate, without a signed agreement in place with OSI, OSI explicitly reserves the right to use such information, and pursue and/or hire such candidates, without any financial obligation to the person, recruiter or agency.
Supply Chain Engineer - Mechanical VardaSupply Chain Engineer - MechanicalEl Segundo, CA$119,000–$139,000 / yearVarda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital. Varda, like all employers, must ensure that its employees working in the United States are lawfully authorized to work in the U.S. Additionally, our employees are exposed to and have access to certain export-controlled items.
NewControls Design Engineer I Sunbelt ControlsControls Design Engineer IAzusa, CA$33–$44 / hourJoin to apply for the Controls Design Engineer I role at Sunbelt ControlsJoin to apply for the Controls Design Engineer I role at Sunbelt ControlsJOB DESCRIPTIONThe position requires the individual to apply their technical knowledge and any prior experience for the production of controls project design, material selection, and development of sequence of operation for lower level projects. Seniority level Seniority level Entry levelEmployment type Employment type Full-timeJob function Job function Engineering and Information TechnologyIndustries ConstructionReferrals increase your chances of interviewing at Sunbelt Controls by 2xSign in to set job alerts for “Control Design Engineer” roles.
Senior NX Application Engineer (Enterprise Operation Systems) Impulse Space Propulsion Inc.Senior NX Application Engineer (Enterprise Operation Systems)Redondo Beach, CA$150,000–$200,000 / yearSenior NX Application Engineer Enterprise Operation SystemsDepartment ManufacturingEmployment Type Full TimeLocation Redondo Beach Compensation 150000 - 200000 yearDescriptionAs a Senior NX Application Engineer at Impulse Space you will own the administration and optimization of our Siemens NX and Teamcenter ecosystem. This position requires applicants to be either U.S. Persons i.e. U.S. citizen U.S. national lawful permanent U.S. resident green card holder an individual granted asylum in the U.S. or an individual admitted in U.S. refugee status or persons eligible to obtain an export license from the U.S. Departments of State Commerce or other applicable U.S. government agencies.
NewSr. Manufacturing Engineer Quantic ElectronicsSr. Manufacturing EngineerCulver City, CAManufacturing EngineerReports To: Plant ManagerLocation: Culver City, CACompany OverviewThe Electronic Component Segment of ARXIS brings together the industry's most distinguished electronics and manufacturing experts, in an elite portfolio of complementary design, engineering and manufacturing businesses. Ohmega Ticer manufactures OhmegaPly® Resistor‑Conductor Material (RCM) and ships globally to leading copper clad laminators and printed circuit fabricators.
Avionics Systems Engineer CX2Avionics Systems EngineerEl Segundo, CaliforniaThey are comfortable working directly with avionics hardware, electrical systems, Linux-based computers, embedded devices, and networked systems, and can independently diagnose issues at the component, subsystem, and UAS levels. This is a hand-on role responsible for bringing together flight-critical hardware, mission systems, sensors, payloads, communications equipment, and software into fully operational aircraft ready for ground and flight testing.
NewMaterials Engineer JobotMaterials EngineerIrwindale, CA$95,000–$145,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Test Engineer II (Torrance, CA) - 2 positions GCR Professional ServicesTest Engineer II (Torrance, CA) - 2 positionsTorrance, California$36–$46 / hourContractorTest Planning and Strategy: Collaborate with cross-functional teams, including design engineers and project managers, to understand the requirements and specifications of defense and aerospace systems. Test Automation and Continuous Improvement: Identify opportunities for test automation and develop automated test scripts and frameworks to streamline testing processes and increase efficiency.
Component Engineer, SME Bastion TechnologiesComponent Engineer, SMEPasadena, CARemote$165,000–$200,000 / yearExperience must include expert knowledge in one or more of the following areas - RF Parts, Hybrid Parts, Magnetics, Photonics, VLSI Microelectronics, or Passives Parts in support of parts development, fabrication, manufacturing, process integration, reliability assessment, and test and/or qualification. Provide technical oversight of flight electronic parts tasks including the creation of engineering requirements specifications and drawings, and advising projects on part selections maximizing reliability while considering cost and schedule constraints.
Propulsion Component Responsible Engineer HermeusPropulsion Component Responsible EngineerLos Angeles, CA$91,800–$112,200 / yearEngineer I $91,800 - $112,200 Engineer II $114,750 - $140,250 Engineer III $138,550 - $187,450 The salary information provided is a general guideline only. You will be responsible for taking hardware from clean-sheet design through build, test, qualification, and production, working in close collaboration with propulsion and vehicle teams.
Senior Electrical Engineer Tetra Tech IncSenior Electrical EngineerPasadena, CA$140,000–$190,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Please note that Tetra Tech considers various factors in determining pay, including but not limited to: education, relevant and demonstrated work experience in the role, skills, geographic location, qualifications, certifications, and other competencies relevant to the needs of the business.
Radiation Effects Engineer Impulse SpaceRadiation Effects EngineerRedondo Beach, CA$120,000–$150,000 / yearYou’ll work closely with electrical engineers, RF engineers, EMC engineers, mechanical engineers, and test engineers to maximize reliability, perform analysis and testing, and ensure reliable hardware performance across Impulse’s spacecraft. As a Radiation Effects Engineer, your core responsibility will be to contribute to the component selection, design, testing, and delivery of flight hardware systems for space missions from low Earth orbit to mars.
NewAdvanced Electrical Engineer Honeywell Aerospace US LLCAdvanced Electrical EngineerGlendale, CAOur solutions create healthier air travel, more fuel‑efficient and better‑maintained aircraft, more direct and on‑time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. ResponsibilitiesThe candidate will be responsible to work with a team of engineers in the design and support of hardware for space application, supporting ongoing production and new business activities related to Honeywell's Momentum Controls Systems product lines.
NewSenior Electrical Engineer (PCB Layout) Castelion CorporationSenior Electrical Engineer (PCB Layout)Torrance, CaliforniaThis role requires strong technical judgment, the ability to drive layout decisions across analog, digital, RF, and power domains, and comfort leading fabrication and assembly partners through DFM and production readiness. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Embedded Software Engineer Illinois Tool Works IncEmbedded Software EngineerCA$78,400–$130,000 / yearJob Description: Objective of role: The Embedded Software Engineer is responsible for the design, development, testing, and support of embedded software solutions for both existing and new products, including new hardware bring-up, low-level hardware/software integration, and support of microcontroller-based embedded systems. The ideal candidate is comfortable working close to the hardware and can efficiently diagnose and resolve low-level issues involving microcontrollers, memory, interfaces, sensors, and communication devices.
NewManufacturing Development Engineer (All levels) Divergent EnterprisesManufacturing Development Engineer (All levels)Los Angeles, CAAM Manufacturing Engineer) of experience in mechanical engineering, electrical engineering, systems engineering, or manufacturing engineering, preferably in additive manufacturing, capital equipment, or low-volume/high-mix production environments. PurposeAs an Additive Manufacturing (AM) Manufacturing Engineer, you will contribute to manufacturing engineering efforts across the development, build, and production lifecycle of advanced laser powder bed fusion (LPBF) and manufacturing systems.
Lead Flight Software Engineer, Special Programs Impulse SpaceLead Flight Software Engineer, Special ProgramsRedondo Beach, CA$150,000–$200,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Proven track record delivering flight software for spacecraft, launch vehicles, upper stages, OTVs, responsive spacecraft, or other high-performance aerospace systems.
NewAssociate Manufacturing Engineer – Electrical BoeingAssociate Manufacturing Engineer – ElectricalEl Segundo, California$76,500–$103,500 / yearThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The Boeing Company Boeing Defense, Space & Security (BDS) Space, Intelligence & Weapons Systems (SIWS) is seeking an Associate Manufacturing Engineer (Level 1) specializing in Electrical manufacturing to support production activities in El Segundo, CA.
NewSenior Supplier Quality Engineer II Rocket LabSenior Supplier Quality Engineer IILong Beach, CA$124,800–$156,000 / yearFOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLYTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Sr. Software Engineer, Hardware Test & Automation Starshield Space Exploration Technologies CorpSr. Software Engineer, Hardware Test & Automation StarshieldHawthorne, CA$165,000–$230,000 / yearOur software engineers are responsible for the tools that enable rapid development and accurate testing of all Starshield hardware systems, with a continual focus on design, reliability, and innovation, from test hardware system designs to our software infrastructure. Software Engineer on the Starshield Integration & Test team, your focus will be on developing integrated operations and automation infrastructure for the Hardware In The Loop (HITL) testbeds and production floor that bring the Starshield Satellites to life.
Senior HW Reliability Engineer Nokia CorpSenior HW Reliability EngineerCAYou will support early product development and co-operate with product development teams by defining and analyzing reliability specifications while also evaluating products already in the field through failure rate, MTBF, useful life, and field data analysis. With expertise across fixed, mobile and transport networks, powered by the innovation of Nokia Bell Labs, we're advancing connectivity to secure a brighter world.
Turbomachinery Engineer Impulse Space Propulsion Inc.Turbomachinery EngineerRedondo Beach, CA$115,000–$165,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As a Turbomachinery Engineer at Impulse Space, you will design, analyze, build and test high performance turbomachinery while working closely with a fast paced, agile team.
Functional Safety Engineer – Body & Thermal Systems Rivian and Volkswagen Group TechnologiesFunctional Safety Engineer – Body & Thermal SystemsIrvine, CaliforniaRivian and Volkswagen Group Technologies may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian and Volkswagen Group Technologies affiliates; and (iii) Rivian and Volkswagen Group Technologies’ service providers, including providers of background checks, staffing services, and cloud services. Rivian and Volkswagen Group Technologies may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) record keeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law.
Sr. EMC Design Engineer Rivian and Volkswagen Group TechnologiesSr. EMC Design EngineerIrvine, CaliforniaRivian and Volkswagen Group Technologies may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian and Volkswagen Group Technologies affiliates; and (iii) Rivian and Volkswagen Group Technologies’ service providers, including providers of background checks, staffing services, and cloud services. Rivian and Volkswagen Group Technologies may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) record keeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law.
Sr Principal Systems Engineer - I&T Northrop Grumman CorpSr Principal Systems Engineer - I&TWoodland Hills, CA$142,200–$213,400 / yearThe above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions. As a member of the I&T department, the candidate will work in a fast-paced team environment alongside physicists, design engineers, and superconducting foundry engineers to make our technologies a reality.
NewManufacturing Engineer JobotManufacturing EngineerBrea, CA$100,000–$120,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. With advanced capabilities across silicone sealants and insulation components, our client operates from a modern California facility and serves a broad and critical customer base, while fostering innovation, craftsmanship, and continuous growth.
NewStructural Engineer JobotStructural EngineerPasadena, CA$105,000–$140,000 / yearWorking on residential, commercial, institutional, and seismic retrofit projects, giving engineers hands-on experience with challenging designs, cutting-edge analysis tools, and collaborative, multidisciplinary teams. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
NewSenior Mechanical Engineer JobotSenior Mechanical EngineerTorrance, CA$1,200,000–$145,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. This team has delivered award-winning architectural and engineering solutions for both public and private sector clients across: Aerospace, Commercial and Industrial giants, Correctional and Government Facilities, Educational Institutions and Healthcare Facilities to name a few.
NewPCB Manufacturing Engineer JobotPCB Manufacturing EngineerIrvine, CA$90,000–$110,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. The successful candidate will be a vital part of our organization, utilizing their expertise in PCBA Development within electronics manufacturing to drive operational efficiency and effectiveness.
NewSenior Propulsion Fluids Component Engineer Impulse SpaceSenior Propulsion Fluids Component EngineerRedondo Beach, CAA leading aerospace company is seeking a Senior Propulsion Component Engineer (Fluids) to design and develop propulsion system valves and fluid components. This role involves collaboration in an agile team environment, focusing on innovative solutions throughout the product realization process in a fast-paced setting.
Propulsion Component Engineer (Solenoid Valve) Impulse SpacePropulsion Component Engineer (Solenoid Valve)Redondo Beach, CA$100,000–$155,000 / yearAs a Propulsion Component Engineer, you will own all aspects of spacecraft solenoid valve design from concept to product realization, while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Component Engineer, SME - Part-Time (BT-26115) Bastion Technologies IncComponent Engineer, SME - Part-Time (BT-26115)Pasadena, CARemote$140,000–$200,000 / yearExperience must include expert knowledge in one or more of the following areas - RF Parts, Hybrid Parts, Magnetics, Photonics, VLSI Microelectronics, or Passives Parts in support of parts development, fabrication, manufacturing, process integration, reliability assessment, and test and/or qualification. Provide technical oversight of flight electronic parts tasks including the creation of engineering requirements specifications and drawings, and advising projects on part selections maximizing reliability while considering cost and schedule constraints.
Components Manufacturing Engineer HermeusComponents Manufacturing EngineerLos Angeles, CA$100,000–$170,000 / yearYou'll work closely with design, materials, and production teams to bridge the gap between prototype and production, helping define what world-class manufacturing looks like for our next-generation hardware. About this role: We are seeking a Components Manufacturing Engineer to be the first of its kind at our facility - responsible for establishing, developing, and scaling advanced manufacturing processes for critical hardware.
Components Manufacturing Engineer - Sheet Metal HermeusComponents Manufacturing Engineer - Sheet MetalLos Angeles, CA$100,000–$175,000 / yearThis role is highly hands-on, combining deep technical expertise with operational leadership to enable rapid, high-quality production of precision components supporting next-generation hypersonic aircraft. Own the schedule, capacity, and demand planning for the internal sheet metal shop; align build priorities with key stakeholders and proactively manage delivery risk.
Electrical Engineer II Peregrine TeamElectrical Engineer IILos Angeles, CAFull timeThe Electrical Engineer II will support the design, testing, and integration of electrical systems within engineering and manufacturing environments. Work with cross-functional teams to support product development initiatives.
Avionics Electrical Engineer (Electric Propulsion) Impulse SpaceAvionics Electrical Engineer (Electric Propulsion)Redondo Beach, CA$105,000–$135,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Demonstrated experience doing new development and hands-on work for any of the following: power converters, load switches, engine controllers, processors, or any other specialized area relevant to spacecraft or rockets.
Avionics Electrical Engineer (All Levels) Impulse SpaceAvionics Electrical Engineer (All Levels)Redondo Beach, CA$110,000–$150,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Experience doing new development work for any of the following: power converters, load switches, engine controllers, processors, or any other specialized area relevant to spacecraft or rockets.
SR. Electrical Engineer Essel EnvironmentalSR. Electrical EngineerSanta Fe Springs, CAYou will create electrical schematics, will write PLC/HMI programs, and will participate in the debugging, testing, and commissioning of custom machinery that include motion systems, heaters, pumps, and automated hoists. Have you gained significant experience in designing electrical system layouts, electrical panel designs and control programs with great quality, accuracy, and timeliness and are looking to expand your skill set?.