Diesel Technician/Mechanic III - Entry Level Penske Truck RentalDiesel Technician/Mechanic III - Entry LevelSAVANNAH, GAWillingness to travel as necessary within the district (customers’ yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening. • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles.
Field Maintenance Technician - Georgia Wawa, Inc.Field Maintenance Technician - GeorgiaHinesville, GAPerform specific store repairs, installation, replacement, and maintenance tasks as assigned through the Asset Management System such as (but not limited to) carpentry, minor plumbing (filter changes, water treatment PM, clogs, fixture and sensor replacements), interior and exterior painting, dry wall, tiling, light bulbs, counter tops and cabinets. Must be able to perform the following physical actions repetitively and for long periods of time: standing, crouching, bending, reaching above the shoulders, reaching below the waist, reaching horizontally, squatting, climbing, kneeling, pushing, pulling, and grasping firmly.
HVAC Technician - Conditioned Air License Contractor System OneHVAC Technician - Conditioned Air License ContractorRincon, GA$32–$50 / hourPerform skilled mechanical maintenance duties in the inspection, repair, installation, and alteration of air purification units, heating, ventilation, air conditioning, refrigeration systems, and related equipment and facilities. Experience in HVAC including refrigerant controls, electric motors (3-phase and 1-phase), motor controls (contractors, starters, relays, disconnects, thermostats).
NewIrrigation Technician Yellowstone LandscapeIrrigation TechnicianSavannah, GAKnowledge of irrigation clocks, adjusting/repairing irrigation heads, sensors, valve repair, and lateral & mainline repairs. The Irrigation Technician will oversee various irrigation and landscaping maintenance contracts on high-profile commercial properties.
NewPart Time Hospital Service Technician WMPart Time Hospital Service TechnicianBeaufort, SC$202 years industry related experience in a customer service capacity preferred, or the equivalent in related work experience, demonstrating strong communication skills and tact in providing superior customer service in a variety of settings and situations or preferred education requirement. Travels between customer healthcare facilities to proactively monitor, collect, and exchange waste containers for various WMHS programs and services, including but not limited to: Sharps Management Service, Pharmaceutical Waste, Controlled Substance and Document Management.
Lead Bicycle Technician Marriott Vacations WorldwideLead Bicycle TechnicianHilton Head Island, SCAnswers telephones using appropriate etiquette including answering the phone within 3 rings, answering with a smile in one's voice, using the callers' name, transferring calls to appropriate person/department, requesting permission before placing the caller on hold, taking and relaying messages, and allowing the caller to end the call. • Provides assistance to individuals with disabilities, including assisting visually, hearing, or physically-impaired individuals within guidelines (e.g., escorting them when requested, using words to explain actions, writing directions on paper, moving objects out of the way, or offering access to Braille or TDD phones).
NewFloor Technician - Savannah College of Arts & Design AramarkFloor Technician - Savannah College of Arts & DesignSavannah, GAUses proper procedures on hard floor care (stripping & refinishing, burnishing, spray cleaning, and spray buffing) in adherence to the principles of hard surface floor maintenance. Properly processes all municipal solid waste (MSW), infectious, and pharmaceutical waste including rendering infectious waste as MSW.
NewMaintenance Technician II Marriott International, IncMaintenance Technician IIHilton Head Island, SCDisplay proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.
NewSenior Plumbing Technician Howell ChaseSenior Plumbing TechnicianBluffton, SC$26–$30 / hourHowell-Chase Heating & Air is seeking an experienced Plumbing Service Technician to join our growing team in Bluffton, SC. Clear communication, professionalism, and the ability to troubleshoot efficiently are essential as you support homeowners and contribute to our reputation for exceptional service.
Electronics Technician U.S. NavyElectronics TechnicianSavannah, GAWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Computer Field Technician U.S. NavyComputer Field TechnicianPooler, GAWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewInformation Systems Technician U.S. NavyInformation Systems TechnicianPembroke, GAKey Responsibilities As an Information Systems Technician, design, operate, secure, and restore networks, servers, and communication systems that support naval operations; as a Cryptologic Technician Networks specialist, conduct offensive and defensive cyber operations, investigate and track adversary activity, and help protect Navy networks and critical systems; as an Intelligence Specialist, collect and analyze information on adversaries, environments, and weather and create intelligence products and briefings for commanders. Pathways, Training & Advancement Recruit Training followed by Class A School in an information warfare specialty, such as IT or CTN at information warfare training sites and IS at intelligence training commands; advanced C schools and follow on training in areas such as cyber operations, network defense, digital forensics, signals analysis, targeting, imagery, language, and mission systems; progressive advancement based on qualifications, performance, and warfare pins such as Information Warfare and platform specific warfare designations.
Part-Time Kitchen Exhaust Cleaning Technician Hoodz of the Lowcountry and Coastal GeorgiaPart-Time Kitchen Exhaust Cleaning TechnicianSavannah, GA$20–$25 / hourOur crews work overnight to clean hoods, ducts, and rooftop fans — preventing kitchen fires and keeping restaurants, hospitals, and schools compliant and safe. This is a great fit if you already work in roofing, HVAC, fire suppression, painting, pipefitting, or another hands-on trade and want to add solid supplemental income without giving up your day job.
Aviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianBluffton, SCWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Aviation Electronics Technician U.S. NavyAviation Electronics TechnicianBloomingdale, GAWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Tank Wash Technician Total CleanTank Wash TechnicianPooler, GeorgiaThe position is responsible for the performance of tasks associated with the cleaning of hazardous, non-hazardous and food grade tanker trailers, on-site remediation, clean-up, equipment de-contamination and handling of hazardous materials. Heniff Transportation provides best-in-class supply chain solutions to our valued customers by utilizing our network of supply chain services and resources.
Interior Installation Technician IV *Multiple Shifts Available* Gulfstream Aerospace CorporationInterior Installation Technician IV *Multiple Shifts Available*Savannah, GAAdvanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Position Purpose: The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories.
NewInterior Installation Technician IV Gulfstream Aerospace CorporationInterior Installation Technician IVSavannah, GAAdvanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Position Purpose: The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories.
Interior Installation Technician 3 Gulfstream Aerospace CorporationInterior Installation Technician 3Savannah, GAAdvanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Position Purpose: The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories.
Electrical Maintenance Technician MOBISElectrical Maintenance TechnicianRichmond Hill, GAFull timeElectrical troubleshooting experience - hands‑on work with motors, sensors, relays, contactors, and control circuits in a manufacturing environmentExperience with automation components - exposure to VFDs, proximity sensors, photoeyes, safety circuits, and control panelsKnowledge of Total Productive Maintenance (TMP) techniquesUse of industrial tools and diagnostic equipment - multimeters, torque tools, alignment tools, etcWorking Knowledge of Schematics and Electrical SystemsWorking Knowledge of Servo Motors and ControlsWorking Knowledge of Preventive Maintenance PracticesHydraulics and pneumatics knowledge - understanding of valves, cylinders, actuators, and air systemsKnowledge of centrifugal PumpsStrong safety awareness - understanding of LOTO, electrical safety, and safe machine practicesRequired Knowledge, Skills, & Abilities:Proficiency in Microsoft Excel and PowerPointGood written and verbal communication skillsStrong analytical and technical skillsPreferred Education & Experience:Experience in Welding (GMAW/MIG/FSW/Laser) and Press ProcessExperience in automotive manufacturing environmentExperience in battery manufacturing environmentAbility to understand 2D/3D drawings and knowledge of design toolsERP experienceWorking Conditions:Office setting, some walking within and between buildingsOvertime as neededFrequent travel with possible overnight or extended stays*This role will provide direct support to 2nd shift operations* The technician plays a key role in minimizing downtime, executing preventive maintenance strategies, supporting new equipment installations, and partnering with Engineering and Operations to drive continuous improvement.
Generator Technician Power Plus Systems, LLCGenerator TechnicianSavannah, Georgia$18–$30Your responsibilities will encompass servicing and maintaining home standby generators, precise installations in compliance with local codes, diagnosing complex issues, and executing efficient repairs. Our vision is to successfully wire 28,000 homes to completion by the year 2029, ensuring safe and efficient electrical solutions, thereby making a positive impact on the lives of our customers and communities.
NewGeneral Maintenance Technician Hunt MH Shared Services LLCGeneral Maintenance TechnicianBeaufort, SCPart timeThis includes cleaning, painting, interior/exterior decorating and maintenance, lawn maintenance, debris removal, plumbing, electrical work, smoke detector maintenance, repair or replacement of lights, roof repairs, heating/air systems maintenance, appliance repairs, etc. Oral Communications - Understand spoken English to follow basic instructions and take direction from supervisors; communicate effectively in basic English with clients, visitors and organization staff in response to routine questions.
General Maintenance Technician Hunt Companies IncGeneral Maintenance TechnicianSCThis includes cleaning, painting, interior/exterior decorating and maintenance, lawn maintenance, debris removal, plumbing, electrical work, smoke detector maintenance, repair or replacement of lights, roof repairs, heating/air systems maintenance, appliance repairs, etc. Oral Communications - Understand spoken English to follow basic instructions and take direction from supervisors; communicate effectively in basic English with clients, visitors and organization staff in response to routine questions.
Field Maintenance Technician - Georiga Wawa IncField Maintenance Technician - GeorigaGAPerform specific store repairs, installation, replacement, and maintenance tasks as assigned through the Asset Management System such as (but not limited to) carpentry, minor plumbing (filter changes, water treatment PM, clogs, fixture and sensor replacements), interior and exterior painting, dry wall, tiling, light bulbs, counter tops and cabinets. Must be able to perform the following physical actions repetitively and for long periods of time: standing, crouching, bending, reaching above the shoulders, reaching below the waist, reaching horizontally, squatting, climbing, kneeling, pushing, pulling, and grasping firmly.
Interior Installation Technician 3 General Dynamics CorpInterior Installation Technician 3Savannah, GAAdvanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Position Purpose: The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories.
Interior Installation Technician IV *Multiple Shifts Available* General Dynamics CorpInterior Installation Technician IV *Multiple Shifts Available*Savannah, GAAdvanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Position Purpose: The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories.
Interior Installation Technician IV General Dynamics CorpInterior Installation Technician IVSavannah, GAAdvanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Position Purpose: The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories.
Hydraulic Hose Installation Technician PIRTEK SavannahHydraulic Hose Installation TechnicianSavannah, GeorgiaAs a PIRTEK Hose Installation Technician, you will be operating out of a PIRTEK Service & Supply Center in a purpose-built mobile hose workshop/van and be carrying out service calls in the local area. We provide our customers with the fastest hydraulic and industrial hose maintenance and replacement services through on-site mobile and retail PIRTEK Service & Supply centers throughout the United States.
Conventional Machinist - Aircraft Component Repair Technician Senior Gulfstream Aerospace CorporationConventional Machinist - Aircraft Component Repair Technician SeniorSavannah, GAShowing superior technical skill and competence, perform, instruct, and oversee repair of mech and elect assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, eng dispositions, and other authorized maintenance data. Position Purpose: Working with a high degree of independence, provide leadership and technical guidance while performing the repair and overhaul of internal and external aircraft assemblies, subassemblies and components in accordance with GAC Repair Station requirements.
Maintenance Technician Roscoe Property ManagementMaintenance TechnicianPooler, GA$25–$26 / hourComplete grounds work as directed by Maintenance Manager and/or Community Manager which may include picking up trash, clean dumpster areas, trash rooms and trash chutes, blowing the parking area and sidewalks, removing debris, power washing, etc. Assist in pool maintenance and understand basic pool care (chemicals reading, making chemical adjustments, backwashing, pool cleaning, etc.).
Embedded Security Service Technician Allied UniversalEmbedded Security Service TechnicianSavannah, GAMust possess a valid Driver's License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a company issued vehicle. RESPONSIBILITIES: Serve as a dedicated on-site security technology resource for an assigned client location to perform service, maintenance, troubleshooting, diagnostics, repair, replacement, and testing of electronic security systems, including but not limited to: Electrified/non-electrified locks, card readers, ancillary door devices.
HVAC Service Technician PEAK Technical Services Inc.HVAC Service TechnicianSavannah, GA$25–$32 / hourInstallation and Maintenance: Install, maintain, and repair HVAC systems in commercial buildings, including offices, retail spaces, and industrial facilities. Troubleshooting: Diagnose mechanical and electrical issues within HVAC systems and perform necessary repairs to ensure efficient operation.
Telecom Field Operations Technician II Southern CoTelecom Field Operations Technician IISavannah, GAThe company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Ability to logically troubleshoot and repair hardware and software associated with personal computers, peripheral devices, voice systems, data networks, telecommunications (microwave and/or fiber) systems and ancillary equipment (e.g., alarm systems, DC systems).
HVAC Maintenance Technician Aire Serv of SavannahHVAC Maintenance TechnicianSavannah, GAFull timeAll independently owned and operated franchised businesses operate under the service brands’ marks, trademarks, trade names, logos, emblems, slogans, or other indicia of origin in connection with the Aire Serv® franchise system within a specified geographical area. Only the independently owned and operated franchised business shall have any interaction with or authority for its business and make all employment related decisions related to its franchised business.
Temporary Maintenance Technician Willow Bridge Property CompanyTemporary Maintenance TechnicianBluffton, South CarolinaOverview: Founded in 1965 by Mack Pogue as Lincoln Property Company, Willow Bridge Property Company is one of the United States’ most respected full-service residential property companies, operating a successful portfolio in 75 markets. With decades of proven success, Willow Bridge is a national leader in residential property management and development, active in 29 states and managing more than 230,000 apartment homes across the U.S. At Willow Bridge, our purpose drives everything we do.
Experienced Apartment Maintenance Technician InterSolutionsExperienced Apartment Maintenance TechnicianBeaufort, SC$20–$24 / hourWe re looking for motivated, organized, and reliable professionals who are ready to lead teams, oversee maintenance operations, and ensure high-quality service across apartment communities. Primary Responsibilities Include: Assign and assist with apartment service requests, ensuring all work orders are logged accurately and completed promptly.
Hose Installation Technician PIRTEK SavannahHose Installation TechnicianSavannah, Georgia$60,000–$90,000 / yearWe provide our customers with the fastest hydraulic and industrial hose maintenance and replacement services through on-site mobile and retail PIRTEK Service & Supply centers throughout the United States. Key Responsibilities: Perform on-site hydraulic hose replacement, assembly, and installation for customers in various industries, including construction, agriculture, marine, and logistics.
Maintenance Technician | Lease up Roscoe Property ManagementMaintenance Technician | Lease upBloomingdale, GAComplete grounds work as directed by Maintenance Manager and/or Community Manager which may include picking up trash, clean dumpster areas, trash rooms and trash chutes, blowing the parking area and sidewalks, removing debris, power washing, etc. Assist in pool maintenance and understand basic pool care (chemicals reading, making chemical adjustments, backwashing, pool cleaning, etc.).
HVAC Refrigeration Service Technician NextechHVAC Refrigeration Service TechnicianSavannah, Georgia$30 / hourCompany Vehicle: Hit the road in a fully equipped van, gas card includedStart Your Day from Home: Dispatched directly from home for daily convenienceGet Paid for All Your Time: Paid port-to-port travel means no unpaid downtimeTool Allowance: Keep your gear sharp - we've got you coveredProfessional Growth: Paid training, certification support, and education reimbursementOutstanding Benefits: With more than 2,000 team members and growing, we are the largest HVAC/R service provider in the United States and we continue to push the industry forward.
Maintenance Technician RPM LivingMaintenance TechnicianPooler, Georgia$25–$26 / hourFull timeComplete grounds work as directed by Maintenance Manager and/or Community Manager which may include picking up trash, clean dumpster areas, trash rooms and trash chutes, blowing the parking area and sidewalks, removing debris, power washing, etc. Assist in pool maintenance and understand basic pool care (chemicals reading, making chemical adjustments, backwashing, pool cleaning, etc.).
Maintenance Technician AA2ITMaintenance TechnicianSavannah, GA$25–$28 / hourThis role focuses on preventive maintenance, troubleshooting, and reliable operation of building and production-support systems in a safety critical environment. This position is ideal for someone who takes pride in their craft, works well in a team-based setting, and understands the importance of doing the job right the first time.
Fleet Vehicle Technician III Beaufort County SCFleet Vehicle Technician IIISC$30.09–$35.89 / hourThis role integrates the specialized skills of diesel engines, heavy equipment, marine, and small engines, ensuring the operational efficiency, safety, and reliability of public safety, public service vehicles, construction equipment, and aquatic vessels. Conduct diagnostics to identify issues and repair methods for diesel and gasoline-powered vehicles and equipment (trucks, buses, generators, public safety and public services ).
Aircraft Interior Installation Technician II The Structures Company, LLCAircraft Interior Installation Technician IISavannah, GA
Irrigation Technician Ruppert CompaniesIrrigation TechnicianBluffton, SCFull timeQualifications : Minimum 1 year experience performing irrigation maintenance and installation in a commercial or residential environment, or similar experience in plumbing, HVAC, or mechanical fields. With a multi-state presence and a small company feel, our mission is to provide opportunities for our people, take care of our customers, and be good stewards of the environment and our community.
Technician, Petroleum Service OWL Services IncTechnician, Petroleum ServiceSavannah, GAOWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. The service technician's role entails diagnosing and repairing electronic and mechanical issues, software and hardware installations, and performing emergency and scheduled repairs and maintenance.
Traveling General Maintenance Technician Lane Valente IndustriesTraveling General Maintenance TechnicianSavannah, GACURRENT OPPORTUNITY: General Maintenance Technician National maintenance and construction firm is recruiting General Maintenance Technician, willing to travel for full-time commercial construction projects across the United States. Electrical replacement installation of light fixtures, switches and outlets, capable of basic data connections and able to diagnose minor electrical problems (licensed electricians encouraged to apply).
General Maintenance Technician Lane Valente IndustriesGeneral Maintenance TechnicianSavannah, GACURRENT OPPORTUNITY: General Maintenance Technician National maintenance and construction firm is recruiting General Maintenance Technician, willing to travel for full-time commercial construction projects across the United States. Electrical replacement installation of light fixtures, switches and outlets, capable of basic data connections and able to diagnose minor electrical problems (licensed electricians encouraged to apply).
Aircraft Component Repair Technician 3 - Structures Gulfstream Aerospace CorporationAircraft Component Repair Technician 3 - StructuresSavannah, GAIndependently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, wattmeters, spectrum analyzers, and borescopes.
Non-Destructive Test (Ndt) Technician Senior Gulfstream Aerospace CorporationNon-Destructive Test (Ndt) Technician SeniorSavannah, GANDTTechnician #NDTJobs #NonDestructiveTesting #AerospaceInspection #MagneticParticleTesting #LiquidPenetrantTesting #RadiographicTesting #UltrasonicTesting #EddyCurrentTesting #LI-JRJ. The NDT (Non-Destructive Testing) team is part of our Enterprise Quality organization that focuses on ensuring part integrity and compliance to engineering type design by utilizing non destructive methods (UT, ET, MT, PT, and RT) to test our aircrafts and parts during production.
Non-Destructive Test (NDT) Technician Senior Gulfstream Aerospace CorporationNon-Destructive Test (NDT) Technician SeniorSavannah, GANDTTechnician #NDTJobs #NonDestructiveTesting #AerospaceInspection #MagneticParticleTesting #LiquidPenetrantTesting #RadiographicTesting #UltrasonicTesting #EddyCurrentTesting #LI-JRJ. The NDT (Non-Destructive Testing) team is part of our Enterprise Quality organization that focuses on ensuring part integrity and compliance to engineering type design by utilizing non destructive methods (UT, ET, MT, PT, and RT) to test our aircrafts and parts during production.