UNKNOWN

FEED

Interface with Navy and other customers, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Planning Yard, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, test, commissioning efforts, dock trials, sea trials, and resolve technical issues with assigned systems/tasking. Perform systems engineering, system integration, or project related tasks including requirements analyses, requirements decomposition, developing and evaluating operational requirements, developing software requirements, resolution of requirements conflicts, specification development, and management of budget and schedule.

YEAR

Shipbuilding has been a way of life along the Kennebec River in Bath, Maine, since 1762, when the sailing ship Earl of Bute was launched on the site of present day Bath. The Bath Iron Works (BIW) shipyard, located on the west bank of the Kennebec, just south of downtown Bath, is the namesake of an iron foundry established in 1826. Brevet General Thomas W. Hyde, US Army (Ret) took over the foundry in 1865, following service with the 20th Maine Regiment during the Civil War. Nearly two decades later, he incorporated his diversified marine business interests as Bath Iron Works, Limited in 1884, before expanding into shipbuilding with the acquisition of the Goss Marine Iron Works in 1888.The first BIW-built vessel was a coastal passenger ship named Cottage City built for the Maine Steamship Co. Since the completion of Hull #1 in 1890, BIW has been awarded more than 425 shipbuilding contracts, including 245 military ships (mostly destroyers and frigates for the US Navy) and over 160 private yachts and commercial vessels. BIW became a wholly-owned subsidiary of General Dynamics in September 1995. In terms of modern US Navy surface combatant programs -- ones where BIW ships are still in service -- the Lead Ship construction contract for the Oliver Hazard Perry (FFG 7) Class of guided missile frigates was awarded to BIW in 1973, and 24 of these surface combatants were delivered over the next 15 years. In 1982, the Navy selected BIW as second-source shipbuilder for the Ticonderoga (CG 47) Class of AEGIS guided missile cruisers. The company went on to win contracts for eight of these warships, delivering the final one in 1993. In 1985 BIW won the competition for detail design and construction of USS Arleigh Burke (DDG 51) , the Lead Ship for the Navy's newest, most capable class of AEGIS guided missile destroyers. BIW has delivered the lead ship and 30 follow ships, with delivery of the final follow ship under the most recent contract expected in 2011. The US Navy has announced that it will acquire further Arleigh Burke class vessels during the next decade. Under General Dynamics' ownership, BIW solidified its industry leadership position by teaming with the City of Bath and the State of Maine to support a long-term capital investment plan. With the first phase of modernization completed in 2001, BIW began building ships in its new state-of-the-art facility. These improvements ($320 million so far) enable the company to offer unprecedented productivity, quality and affordability to our customer. Further applications of lean manufacturing techniques and advanced modular construction are planned, and the yard has switched to 3D computer-aided design for its latest ships. BIW is building the first of the DDG 1000 class of destroyers, Zumwalt, using these advanced technologies. BIW is a yard with a history, and a bright future. Throughout Navy circles - and especially with their current and former crews - it's generally recognized that 'Bath Built Is Best Built' a phrase first heard in the early 1900s, and every bit as true today as when it was first said.

Bath Iron Works Corp

Electrical Engineer I, II, III

linkup_via_bold

Interface with the local Navy customer, Construction Trades, Procurement, Quality Assurance, Fleet Service Engineering, Equipment vendors, and Design teams through appropriate correspondence to support manufacturing, testing, commissioning efforts, dock trials, sea trials, and resolution of technical issues with assigned systems/tasking. The successful candidate will be responsible for different facets of Engineering that include supporting development, manufacturing, integration/installation, and testing, of Electrical Power, Lighting, and Controls systems installed shipboard, or in support of shipboard system operation.

Sr. / Principal / Sr. Principal Electrical Engineer, Waterfront Engineering

Partnering with Sales, Engineering, Product Management, Training, Service, and Operations to support field teams, you will work on improving installation quality and customer experience and bring field insights back to the business. Provide on-site support for installation, commissioning, startup, and troubleshooting of Generac home energy systems, including generators, automatic transfer switches, solar, energy storage, and associated equipment.

Generac

Field Applications Engineer II - Midwest

sourcestack_via_bold

These individuals normally have exceptional skills and knowledge in particular areas such as work flow management, PM optimization, maintenance technology and/or reliability continuous improvement through FMEA, RCA, RCM, Life Cycle Cost Analysis, and other statistical methods. The Reliability Engineer is responsible for overall leadership to mechanics, project engineers and managers in determining and carrying out the best maintenance practices for equipment reliability and total cost of ownership.

McCain Foods

Reliability Engineer

ea_via_bold

Generac Power Systems Inc

Generator manufacturer training or certifications (Generac, Cummins, Kohler, Briggs & Stratton, CAT, or similar), or industry licensure or credentials such as Master Electrician, Journeyman Electrician, NABCEP PV Associate, NETA, NICET, OEM Generator Certification, or equivalent. Working across Engineering, Product Management, Service, Warranty, Quality, and Sales, you will combine technical support with translating field needs into actionable requirements and owning larger cross-functional technical projects for residential energy systems.

Applications Engineer II

The Principal Controls Engineer, Manufacturing Automation will support both new automation projects and existing production systems, working closely with mechanical engineers, manufacturing engineers, technicians, and production personnel to deliver reliable, capable, and maintainable equipment. Lead the controls portion of new automation projects from concept and system architecture through programming, integration, commissioning, and production deployment; develop and maintain PLC programs, HMI applications, motion-control systems, safety systems, and machine-control architectures.

RTX Corp

Principal Controls Engineer, Manufacturing Automation (Onsite)

In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Collaborate with fellow Performance Engineers & Analysts to track critical issues within the construction and/or operational fleet (equipment, parts, manufacturers, etc.) and share findings with internal teams with a common goal of fleet optimization.

SOLV Energy LLC

Performance Engineer II, EPC (Remote)

Versant Power continues to provide efficient, safe, and reliable delivery of electricity to customers in northern and eastern Maine, while never losing sight of safety, quality, accountability, integrity, and innovation, for over 100 years. REQUIRED OR PREFERRED EDUCATION, CERTIFICATIONS, EXPERIENCE, KNOWLEDGE, SKILLS AND ABILITIES: Education: BS degree in Electrical Engineering or Electrical Engineering Technology required.

Versant Power

ELECTRICAL ENGINEER

7+ years of relevant post education experience as an electrical engineer executing deliverables for Protective Relaying projects in power generation, transmission, and distribution at a utility, industrial, or commercial scale. WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location.

Electrical Studies, Scada & Protection Lead Protection Engineer

WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. 5 to 7 years of relevant post education experience as an electrical engineer executing deliverables for Protective Relaying projects in power generation, transmission, and distribution at a utility or industrial scale.

Protection Engineer - Senior Professional

12+ years of relevant post education experience as an electrical engineer executing deliverables for Protective Relaying projects in power generation, transmission, and distribution at a utility, industrial, or commercial scale. WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location.

Electrical Studies, Scada & Protection Senior Lead Protection Engineer

Tasks include the research, design, planning, and delivery of transmission and distribution substations, power distribution systems, power regulation equipment, renewable energy interconnections, and coordination with protection and control systems across a wide variety of utility projects, supporting substation physical design and/or protection and control (P&C) design scopes based on project needs. Perform professional and complex electrical engineering work associated with substation physical and/or protection and control (P&C) design, including preparation and review of one‑line and three‑line diagrams, wiring and interconnection diagrams, control schematics, substation general arrangements, equipment and bus configurations, grounding grid design, and lightning protection systems.

Substation Project Engineer

Abbott Rapid Diagnostics is part of Abbott's Diagnostics family of businesses, bringing together exceptional teams of experts and industry leading technologies to support diagnostic testing which provides important information for treatment and management of diseases and other conditions. Working with engineering, technicians and production staff, this role troubleshoots and improves process and facilities related issues with limited supervision, exercising sound engineering judgment in a regulated manufacturing environment.

Abbott Laboratories

Facilities Engineer II

As a core member of the Innovation Center startup team, you will participate in the full life cycle of high temperature thermal processing equipment, from collaborating on the specification and procurement of RTM work cells, autoclaves, tape wrappers, high temperature furnaces, and CVI reactors to leading the installation, commissioning, and operation of each. Our materials are being used on ground-breaking space initiatives such as the Orion Multi-Purpose Crew Vehicle and the heat shield for NASA's Mars 2020 mission, important missile programs, airfoils in commercial and military jet engines, and as lightweight armor for U.S. military ground vehicles.

Fiber Materials

Equipment Engineer

Our materials are being used on ground-breaking space initiatives such as the Orion Multi-Purpose Crew Vehicle and the heat shield for NASA's Mars 2020 mission, important missile programs, airfoils in commercial and military jet engines, and as lightweight armor for U.S. military ground vehicles. The focus in Maine is on multidirectional reinforced Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMCs) that enable high-temperature components such as: thermal protection systems, re-entry vehicle nose tips as well as rocket motor throats and nozzles.

Controls Engineer

We are seeking a Senior Process Engineer to join our Regional Engineering Team and provide process engineering and process safety expertise for capital projects across our manufacturing network. The role will initially focus on resin and coating production for beverage, food and household packaging.

Sherwin-Williams

Senior Process Engineer, Regional Engineering

This is a fully billable role, requiring experience with various MES platforms, Data Repositories, Serialization and integration to manufacturing applications (ERP, LIMS, CMMS, etc) and the ability to author, interpret, and lead documentation such as URS, FRS, Functional Narratives, and detailed system architecture designs. Market locations include but are not limited to: Boston, Philadelphia, DMV, Northern New Jersey, Chicago, Indianapolis, Columbus, St Louis, Kansas City, Raleigh-Durham, Houston, Dallas, Boulder, Portland, San Francisco, San Diego, and Los Angeles.

PerkinElmer US LLC

Pharma Automation & Controls Engineer - Project Farma

Awkward/forceful/repetitive (arms above shoulder, bent wrists), Continuous sitting for prolonged periods (more than 2 consecutive hours in an 8 hour day), Continuous standing for prolonged periods (more than 2 consecutive hours in an 8 hour day), Keyboard use (greater or equal to 50% of the workday), Wear ear plugs, Work at heights, e.g. Abbott Rapid Diagnostics is part of Abbott’s Diagnostics family of businesses, bringing together exceptional teams of experts and industry leading technologies to support diagnostic testing which provides important information for treatment and management of diseases and other conditions.

At Abbott, we are enthusiastic, energetic and committed to doing great work every day. Our employees are passionate about helping to translate science into lasting contributions to health care and the health of people worldwide. At the heart of our organization is our "Promise for Life"&mdash;a statement that embodies our company's commitment to employees, shareholders, local communities and the people who depend on our company and products to live healthier lives.
 
Vital to our promise is the speed in which we act, respond and deliver. As Abbott employees, we are ready to meet change and challenges head-on. As a result, we are a company that adapts quickly, and through our passion for innovation we are able to continually create a pipeline of products that help improve the length and quality of life around the world.
 
We are proud of our rich, more than 120-year history. We continue to be driven to advance leading-edge science and technologies, support diversity, focus on exceptional performance and earn the trust of those we serve.

Commissioning Engineer Jobs in Maine

Electrical Engineer I, II, III Bath Iron Works Corp

Sr. / Principal / Sr. Principal Electrical Engineer, Waterfront Engineering Bath Iron Works Corp

Field Applications Engineer II - Midwest Generac

Reliability Engineer McCain Foods

Field Applications Engineer II - Midwest Generac Power Systems Inc

Applications Engineer II Generac Power Systems Inc

Principal Controls Engineer, Manufacturing Automation (Onsite) RTX Corp

Performance Engineer II, EPC (Remote) SOLV Energy LLC

ELECTRICAL ENGINEER Versant Power

Electrical Studies, Scada & Protection Lead Protection Engineer WSP

Protection Engineer - Senior Professional WSP

Electrical Studies, Scada & Protection Senior Lead Protection Engineer WSP

Substation Project Engineer WSP

Principal Controls Engineer, Manufacturing Automation (Onsite) RTX

Facilities Engineer II Abbott Laboratories

Equipment Engineer Fiber Materials

Controls Engineer Fiber Materials

Senior Process Engineer, Regional Engineering Sherwin-Williams

Pharma Automation & Controls Engineer - Project Farma PerkinElmer US LLC

Facilities Engineer II Abbott

Similar Job Searches

Stand out to leading employers.