UNKNOWN

FEED

Mathematical Skills Requires basic math skills to make necessary calculations such as adding, subtracting, multiplying, and dividing; Knowledge of geometry and trigonometry sufficient to perform required inspection calculations. Successfully complete an annual vision examination meeting the following requirements: Near Vision: Snellen 14/18 or better (20/25 or better), Jaeger Type 2 at 14 inches, Ortho-Rater 8, or an equivalent approved method.

HOUR

Crane Company

Quality Inspector

ea_via_bold

devices (i.e. - dial calipers, rulers, tape measures, protractors, micrometers, gauges, optical comparators, ohm meters, leak check, CMM, dial calipers, rulers, tape measures, protractors, micrometers, etc.). Ability and willingness to use hand tools and measuring devices (i.e. - optical comparators, ohm meters, leak check, CMM's, dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department.

GE Aerospace.

Inspector 3 (Sensors)-2nd Shift

linkup_via_bold

Ability to operate CMM equipment using pre-programmed routines. Hands-on experience with inspection tools (calipers, micrometers, gauges, etc.).

Kratos Defense & Security Solutions, Inc. (Nasdaq:KTOS) is a specialized Technology Company providing mission critical products, solutions and services for United States National Security. Kratos' core capabilities are sophisticated engineering, manufacturing and system integration offerings for National Security platforms and programs. Kratos' areas of expertise include Command, Control, Communications, Computing, Combat and Intelligence, Surveillance and Reconnaissance (C5ISR) systems, satellite communications, electronic warfare, unmanned systems, hypersonic systems, directed and high power energy systems, electromagnetic railgun, missile defense, cyber warfare, cybersecurity, information assurance, and critical infrastructure security. Kratos has primarily an engineering and technically oriented work force of approximately 3,100. Substantially all of Kratos' work is performed on a military base, in a secure facility or at a critical infrastructure location.

Kratos Defense & Security Solutions Inc

Strong attention to detail, inspection accuracy, technical drawing interpretation, sound judgment, documentation discipline, teamwork, communication, and the ability to balance quality requirements with production priorities. •Perform receiving inspection of incoming mechanical components, piece parts, assemblies, and materials in accordance with engineering drawings, specifications, inspection plans, and purchase order requirements.

Donatech Corporation

Receiving Inspector

jobdiva

Excellent verbal communication with the ability to effectively present information and respond to questions from managers, customers, government representatives and airline maintenance personnel. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

YEAR

TotalEnergies SE

Tech Support Admin

Working knowledge of PC-DMIS for CMM programming and operation, with experience performing Receiving, In-Process, and Final inspections, including document review, visual inspection, and dimensional inspection using non-CMM measurement equipment (e.g., calipers, micrometers, height gauges). IMPORTANT NOTICE: To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

Sierra Space Corporation

Technical Quality Assurance Inspector III

Strong attention to detail, inspection accuracy, technical drawing interpretation, sound judgment, documentation discipline, teamwork, communication, and the ability to balance quality requirements with production priorities. Perform receiving inspection of incoming mechanical components, piece parts, assemblies, and materials in accordance with engineering drawings, specifications, inspection plans, and purchase order requirements.

DONATECH CORPORATION

General Atomics (GA), and its affiliated companies, is one of the world's leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies. General Atomics Advanced Fabrication Technology in Torrey Pines is seeking a Software Engineer with 5-10 years of experience and a strong background in dimensional metrology and coordinate measuring machines (CMMs).

General Atomics

Engineer III

The company recently secured a multi-year aerospace contract, invested millions of dollars in new equipment, and continues to expand operations, creating excellent long-term career opportunities for skilled machinists. Ability to perform medium-duty work, including exerting up to 50 pounds of force occasionally, up to 20 pounds frequently, and up to 10 pounds constantly to move objects.

Top Prospect Group founders and management team offer more than 75 years of combined experience in Information Technology, Creative & Marketing, and Finance & Accounting staffing and solutions. Our fundamental goal is to build successful relationships resulting in accurate job and prospect representations. We meet with those we work with face-to-face to garner a better understanding of candidate or client requirements. By leveraging our experience and market insight, we are able to provide a more consistent recruitment process. Motivated by a partnership philosophy, our staff possesses a deep understanding of how to forge mutually beneficial long-term relationships. We believe in what we do and continuously strive for excellence.

Top Prospect Group LLC

CNC Machinist 3RD Shift

HaleyMarketing

Chase Staffing

CNC 5-Axis Machinist (Okuma)  1st Shift

Develops and implements manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods, equipment, and new technologies; conferring with equipment vendors. Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.

Warriors Solutions

UPM09 Manufacturing Engineer

Crelate

You ll work closely with cross-functional teams to support rapid iteration and precision in vehicle development, leveraging your expertise in CNC operation, setup, machining, and fabrication to produce accurate and functional parts. Key Responsibilities: CNC Operation and Setup: Set up, operate, and maintainCNC machines (mills, lathes, etc.)to produce precision parts according to engineering drawings and specifications.

Artech LLC

Model Maker

Our best-in-class engineering, design, and manufacturing, combined with category-leading brands in compression, controls, software, and monitoring solutions, result in next-generation climate technology built for the needs of the world ahead. Physical Demands: While performing the duties of this job, you will be required to spend 50% of your time sitting at a desk working on a computer, while the remaining 50% will involve navigating the production floor and inventory areas to access components.

Quality Engineer

The ideal candidate has strong mechanical aptitude, experience interpreting blueprints and technical drawings, and the ability to perform detailed inspections using precision measuring equipment. If you're ever unsure about a communication, don't click any linksvisit https://jobs.elevenrecruiting.com/ directly for confirmed position openings.

Eleven Recruiting

CNC Machinist - 2nd shift

FULL_TIME

FEUER Powertrain North America is the U.S. subsidiary of a leading German crankshaft manufacturer, producing two out of every three crankshafts worldwide for premier automotive brands including Mercedes-Benz, GM, BMW, Volkswagen, Audi, Renault, Jaguar, Bentley, Rolls-Royce, Aston Martin, Ferrari, Maserati, Lamborghini, and many others. If you have an exceptional attitude, outstanding work ethic, and want to be part of a team producing high-precision crankshafts for leading global automotive and powersports manufacturers - We invite you to apply and build your career with FEUER Powertrain.

FEUER-USA

CNC Machinist I

Talent Acquisition

CNC Machinist II

Experienced Machinists may modify CNC programs and work with G-code, feeds and speeds, canned cycles, turning, drilling, tapping, boring, circles, and arcs. These combined requirements reflect the CNC operation, setup, inspection, programming, troubleshooting, and technical-support responsibilities across the three provided job descriptions.

Employ Partners (an AnDek Holdings Company)

Machinist

Complex Issue Resolution: Act as the focal point for escalating production anomalies, leveraging systematic troubleshooting methodologies to isolate root causes affecting shop floor workflows, material flow, resource allocation, and genealogy tracking. • Data Integrity & Reporting: Ensure accurate capture of production transactions, labor reporting, material consumption, and traceability data; generate/validate daily/weekly operational reports for production management and continuous improvement initiatives.

Systems Support

In addition, candidates need a strong inspection background, along with inspection skills and the ability to use gages, micrometers, height gages, optical comparators, and bench set ups on surface plates. Today, On-Board is a thriving privately held family of companies with services including: Consulting, Professional Engineering, Industrial Maintenance and Facility Management, Contracted Manufacturing and Production Services, as well as Temporary Staffing and Recruiting throughout North America.

On-Board Companies

Quality Inspector - Stow

The Aero Repair Inspection Supervisor is a key leadership role responsible for overseeing all inspection and parts preparation operations for as-received, work-in-progress (WIP), and final products, including new and repaired turbine engine and power generation parts. Supervise all inspection activities, including visual, dimensional, and Non-Destructive Testing (NDT) methods such as Fluorescent Penetrant (FPI/LPI), Eddy Current (ET), Magnetic Particle (MPT/MPI), and Radiographic (RT) testing.

<h3>Founded in 2013, APS Solution Inc, is a highly motivated and experienced team providing IT Staffing and Consulting Solutions. Focusing on delivering solutions that transform business requirements and helping clients deliver projects on time, on budget, and to specifications. Utilizing specialized Technical and Subject Matter Expertise the team excels in Project Management, Web Development, Quality Assurance and Support. Our Mission is to provide full project life-cycle capabilities to our clients in requirements, design, development and testing for a wide range of systems using multiple technology platforms and methodologies. We combine business and technical know-how, best-of-breed software solutions and in-depth knowledge to meet and exceed our customers’ expectations. Our Focus have been successfully implementation including Software Quality Assurance, Business Analysis, Project and Portfolio Management, Mobile Application Development. Our Success is our experience in business and technical excellence, expertise with best-of-breed technology, and industry-specific experience to meet and exceed our customers' expectations.</h3>

Cmm Operator Jobs in the United States

Quality Inspector Crane Company

Inspector 3 (Sensors)-2nd Shift GE Aerospace.

Quality Inspector Kratos Defense & Security Solutions Inc

Receiving Inspector Donatech Corporation

Tech Support Admin TotalEnergies SE

Technical Quality Assurance Inspector III Sierra Space Corporation

Receiving Inspector DONATECH CORPORATION

Engineer III General Atomics

CNC Machinist 3RD Shift Top Prospect Group LLC

CNC 5-Axis Machinist (Okuma) 1st Shift Chase Staffing

UPM09 Manufacturing Engineer Warriors Solutions

Model Maker Artech LLC

Quality Engineer Artech LLC

CNC Machinist - 2nd shift Eleven Recruiting

CNC Machinist I FEUER-USA

CNC Machinist II FEUER-USA

Machinist Employ Partners (an AnDek Holdings Company)

Systems Support Donatech Corporation

Quality Inspector - Stow On-Board Companies

Aero Repair Inspection Supervisor- 3rd Shift ProEnergy Services

Similar Job Searches

Stand out to leading employers.