UNKNOWN

FEED

This role requires deep expertise in analog and mixed-signal IC design, exceptional architectural skills, and a demonstrated ability to lead complex developments that span multiple products, technology platforms, and engineering disciplines. ADI combines analog, digital, AI, and software technologies into solutions that combat climate change, reliably connect humans and the world, and help drive advancements in automation and robotics, mobility, healthcare, energy and data centers.

Analog Devices

Senior Principal Mixed Signal Design Engineer

Experience with any of the following tools: Mentor Xpedition xDX Designer, System Vision, MATLAB, MathCad, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS) and Advanced Design System (ADS). At Raytheon , the Effector RF Design Department is seeking current college students for an RF design position to work with a variety of programs as a contributor to detailed design, simulation, product development, and initial product testing.

RF Design Electrical Engineer I (Onsite)

ADAPTED_NOW

Experience with electrical engineering to include troubleshooting, analysis, and test * Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic * Experience with commonly used test equipment including but not limited to: Oscilloscopes, DMMs, Network Analyzers, Power Meters * Experience using schematic capture tools and interpreting schematics. Job Title: Electrical Engineer - ENG02 - Cleared On-SiteLocation: Tucson, AZZip Code: 85701Duration: 12 MonthsPay Rate: $ 65.23hr.

HOUR

Belcan

Electrical Engineer - ENG02 - Cleared On-Site

SmartSearch

The EAP Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Experience with analog electronics design, including one or more of the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, comparator circuits, A/D converters, level shifters, and load switches.

Telemetry and Flight Terminations Engineer II

Experience with the following: EPower/Analog test, analysis, and design support: Perform analysis, simulation, test, and design engineering support for circuit card assemblies in the power, analog, and/or motor controls domains. Electrical Test Engineers Jr / MID /Sr - All qualified resumes will be responded to in 24hrs or less Active Secret or US Citizens in good standing with the ability to apply and hold for a DOD clearance.

Associates Systems

Electrical Test Engineer- DOD Secret MID-SR

ea_via_bold

The EAP Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Principal Motor Controls Engineer

The strongest fit is a hands-on BSEE with 5-10 years of production, manufacturing, test, or sustaining engineering experience who can troubleshoot digital, analog, RF, or mixed-signal circuit card assemblies and communicate clearly across engineering, quality, operations, and suppliers. A high-reliability electronics manufacturing team needs an experienced electrical engineer to keep complex hardware builds moving by rapidly diagnosing factory and supplier issues, defining corrective paths, and owning problems through closure.

Cross Resource Group

Production Support Electrical Engineer

NTA, Inc. is a locally recognized Best Place to Work and Best Place for Working Parents specializing in technical services centered on research, development, integration, demonstration and evaluation of various missile and aviation system technologies with a focus in Position, Navigation, and Timing (PNT) and Guidance and Control (G&C) technologies. Key responsibilities include working as part of a small, agile engineering team to develop mission-critical U.S. Army instrumentation systems, while contributing to the design, development, and testing of electronics hardware, including custom PCBs.

NTA, Inc.

Electrical Engineer

The Applicant Manager

Alternatively, employer will accept a Bachelor's degree in Electrical Engineering, Materials Engineering, Physics, or closely related technical discipline (willing to accept foreign education equivalent) and six (6) years of experience as a Design Verification Engineer or related occupation performing module level design performing with Verilog RTL and function verification. Requirements: Must have a Master's degree in Electrical Engineering, Materials Engineering, Physics, or closely related technical discipline (willing to accept foreign education equivalent) and four (4) years of experience as a Design Verification Engineer or related occupation performing module level design performing with Verilog RTL and function verification.

YEAR

Analog Devices Inc

Staff Engineer, Design Verification Engineering

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. Apply or develop highly advanced technologies, scientific principles, theories, and concepts to the systems integration of fuzing devices, controllers, software, mechanical and electrical interfaces for integration into missile systems and space vehicles.

Senior Principal Engineer – Electrical Fuze & Initiation Systems

Deep, practical expertise in analog SPICE simulation using Cadence Spectre, including SOA checks and the full ADE simulation environmentStrong command of analog simulation domains-DC, AC, transient, noise, and statistical analysis-along with proven techniques for convergence tuning and numerical stability. Solid understanding of CMOS analog processes, combined with direct experience testing, validating, and correlating SPICE modelsClear, effective communication skills with the ability to collaborate across design, CAD, foundry, and vendor teams in a team‑oriented environment.

Cirrus Logic Inc

CAD Engineer (TC-50021286)

We are seeking current college students willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology to design digital electronic circuits that implement missile guidance, video and digital signal processing. The Digital Design Engineer in the Effector Digital Products department designs digital electronic circuit cards and electronic units, which are supported from proposal through transition to production.

Digital Electrical Design Engineer II (Onsite)

As a Principal Hardware Engineer at Honeywell Aerospace, you will play a key technical role in leading, designing and developing sophisticated hardware solutions that advance the future of aerospace technology. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change.

Honeywell Aerospace innovates and integrates thousands of products and services to advance and easily deliver safe, efficient, productive and comfortable experiences worldwide. Our History The first autopilot in 1914, Charles Lindbergh’s first successful solo flight across the Atlantic in 1927, Amelia Earhart’s landmark flight in 1932, and the world’s first sonic boom in 1947, were all made possible because of aviation technology developed by Honeywell and its legacy companies. During World War II, the groundbreaking cabin pressurization system developed by Garrett, Honeywell’s integrated C-1 autopilot, and the Norden bombsight made high-altitude bombing first feasible. Sperry instruments and navigation gear, Bendix electronics, carburetors, wheels, and brakes, and Grimes lighting systems were widely used on World War II aircraft. These innovations were later implemented successfully in civilian aircraft, helping the post-war boom in passenger travel. In the 1950’s, Honeywell Aerospace and its legacy companies changed the face of flying with the development of the first gas-turbine engines and the ring laser gyroscope, which dramatically changed guidance and navigation forever. Sperry brought computer technology to the cockpit with electronic flight instrument systems, flight management systems and other digital technology, and Bendix introduced the first commercial weather radar system.Today, Honeywell Aerospace continues to innovate in the frontier of flight safety with traffic alert and collision avoidance technologies, the AlliedSignal Enhanced Ground Proximity Warning System, and systems that help pilots avoid severe weather and hazards such as lightning and wind shear. We at Honeywell Aerospace are proud of our contributions to aviation history, but we’re just as proud of the history we’re making today. We have created the state-of-the-art integrated Aircraft Environment Surveillance System for the Airbus A380, and our advanced flight management, power distribution, pneumatic, and landing systems will help A380 operators reach new heights of performance and efficiency. We are a leading supplier of products and systems for Boeing commercial airplanes, and our integrated avionics system for the Boeing 777 sets a new technology and reliability standard. Today, we are part of the team working to define technology concepts for the next Boeing airplane, the super-efficient 777. The general, experimental, and light business aviation industries also turn to our respected Bendix/King range of communication and navigation avionics, weather radars, flight controls, flight information services, and other products and services that help make flying safer, more affordable, and more enjoyable. Honeywell Aerospace continues to work to improve the capabilities of military forces, developing systems that power unmanned vehicles, avionics for jet fighters, weapon sensors for precision targeting, and upgrades that extend the lives of proven aircraft and vehicles. We’re part of the Lockheed Martin team working on the Joint Strike Fighter program, and we’re proposing a wide range of systems for the Army’s Future Combat System. For more than 40 years, Honeywell technology has helped with the exploration and creation of opportunities in space. Our products have been integral to Neil Armstrong’s first step on the moon, and to every manned mission to space since. Today, the Space Shuttle is equipped with Honeywell’s Multifunction Electronic Display Subsystem, and we’re reaching into the future of space technology, with our work for the anticipated shuttle successor, the Orbital Space Plane, the International Space Station, and our contributions toward creating a permanent orbiting scientific laboratory and workspace. As powered flight begins its second century, Honeywell Aerospace continues to make history with leading technology, reliable products and systems, superior service, and dedicated employees. The contributions of Honeywell, its legacy companies, and five generations of employees, have advanced the science of aviation to make flying the world’s safest form of transportation, while helping to protect our nation and explore the universe. We look forward to continuing our long tradition of developing and delivering innovative aviation systems that meet the current, and anticipate the future, needs of the customer.

Honeywell Aerospace

Principal Hardware Engineer

You will own meaningful firmware deliverables under the guidance of senior engineers, contribute to architecture discussions, participate in code reviews, and grow your embedded systems expertise within a fast-iteration, vertically integrated engineering environment. You will write robust, deterministic firmware that directly controls sensors, valves, communication interfaces, and calibration systems operating in demanding real-world environments.

Alicat Scientific Inc

Firmware Engineer (Embedded C)

Responsibilities include the ability to make a quick assessment of a problem, identify additional information required, understand the resources available, compare the urgency of the issue to other failures/issues, and to take the understanding of these parts and create a path for troubleshoot and/or correction and final resolution. Able to solve problems quickly and correctly, communicate effectively across multiple teams, take ownership to see a task to completion in a timely manner.

Donatech Corporation

jobdiva

Our semiconductor MEMS programmable solutions offer a rich feature set that enables customers to differentiate their products with higher performance, smaller size, lower power, and better reliability. Today, MEMS timing powers over 400 applications, including high-growth ones in AI datacenters, automated driving, industrial and humanoid robots, wearables and IoT.

SiTime Corp

Validation Engineer

Business group: Intel Foundry strives to make every facet of semiconductor manufacturing state-of-the-art while delighting our customers -- from delivering cutting-edge silicon process and packaging technology leadership for the AI era, enabling our customers to design leadership products, global manufacturing scale and supply chain, through the continuous yield improvements to advanced packaging all the way to final test and assembly. Employees in the Foundry Technology Manufacturing are part of a worldwide factory network that designs, develops, manufactures, and assembly/test packages the compute devices to improve the lives of every person on Earth.

Intel Corp

Silicon Packaging Design Engineer

Day to day interactions with Foundries, manage foundry technology deliverables to enable product design, manage meetings and technical discussions on process technology topics with Foundry partners to meet Renesas' product and roadmap requirements. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future.

Renesas Electronics Corp

Principal Process/Device Engineer

A unique opportunity to join a highly visible strategic marketing group whose mission is to be a segment expert, analyzing market environment for power and sense technologies in industrial and robotics applications, and translate that into new technologies, products, and systems - as onsemi is focused on being the world's leader in providing robust, energy efficient sensing and power solutions world-wide. This role sits at the intersection of engineering, product management, sales, and marketing, translating complex technical capabilities into compelling value propositions for OEMs, Tier‑1s, and system integrators building robots, AMRs, humanoids, industrial/commercial drones, white goods and autonomous machines.

ON Semiconductor Corp

Technical Marketing Engineer - Industrial Robotics

The Teradyne Field Applications team is looking for a highly motivated, energetic and driven Field Application Engineer, who will work collaboratively with the team as well as independently to determine and develop imaginative, thorough, and practical application solutions. Must have Test / Product engineering experience in Digital, High-Speed Digital, High-Power Computing, System on Chip, Mixed Signal, or Analog testing and test development on ATE(Automated Test Equipment) platforms.

Teradyne is a leading supplier of automation equipment for test and industrial applications. Teradyne Automatic Test Equipment (ATE) is used to test semiconductors, wireless products, data storage and complex electronic systems, which serve consumer, communications, industrial and government customers. Our Industrial Automation products include Collaborative Robots used by global manufacturing and light industrial customers to improve quality and increase manufacturing efficiency. In 2017, Teradyne had revenue of $2.14 billion and currently employs approximately 4,500 people worldwide.

Client Representative Jobs in Cheyenne, WY

Senior Principal Mixed Signal Design Engineer Analog Devices

RF Design Electrical Engineer I (Onsite) RTX

Electrical Engineer - ENG02 - Cleared On-Site Belcan

Telemetry and Flight Terminations Engineer II RTX

Electrical Test Engineer- DOD Secret MID-SR Associates Systems

Principal Motor Controls Engineer RTX

Production Support Electrical Engineer Cross Resource Group

Electrical Engineer NTA, Inc.

Staff Engineer, Design Verification Engineering Analog Devices Inc

Senior Principal Engineer – Electrical Fuze & Initiation Systems RTX

CAD Engineer (TC-50021286) Cirrus Logic Inc

Digital Electrical Design Engineer II (Onsite) RTX

Principal Hardware Engineer Honeywell Aerospace

Firmware Engineer (Embedded C) Alicat Scientific Inc

Production Support Electrical Engineer Donatech Corporation

Validation Engineer SiTime Corp

Silicon Packaging Design Engineer Intel Corp

Principal Process/Device Engineer Renesas Electronics Corp

Technical Marketing Engineer - Industrial Robotics ON Semiconductor Corp

Field Application Engineer (Seg; Arizona) Teradyne, Inc.

Similar Job Searches

See More Jobs

Stand out to leading employers.