Facilities Maintenance Technician Accentuate StaffingFacilities Maintenance TechnicianRaleigh, NC$25–$27 / hourFull timeFacilities Maintenance Technician will conduct routine maintenance tasks such as electrical repairs, plumbing repairs, HVAC maintenance, and general building repairs. Technician will perform general repairs and installations such as changing light bulbs, light switches, receptacles, door locks.
NewMEDICATION TECHNICIAN (CNA) - TEMPLETON OF CARY Liberty HealthMEDICATION TECHNICIAN (CNA) - TEMPLETON OF CARYCary, NCSee Liberty Health Terms & Conditions at https://www.jobtarget.com/terms-of-use/ and Privacy Policy at https://www.jobtarget.com/privacy-policy/ and SonicJobs Privacy Policy at https://www.sonicjobs.com/us/privacy-policy and Terms of Use at https://www.sonicjobs.com/us/terms-conditions. Takes orders, documents orders, orders medications, receives medications, and administers medications.
NewMEDICATION TECHNICIAN - HAYES BARTON PLACE Liberty HealthMEDICATION TECHNICIAN - HAYES BARTON PLACERaleigh, NCSee Liberty Health Terms & Conditions at https://www.jobtarget.com/terms-of-use/ and Privacy Policy at https://www.jobtarget.com/privacy-policy/ and SonicJobs Privacy Policy at https://www.sonicjobs.com/us/privacy-policy and Terms of Use at https://www.sonicjobs.com/us/terms-conditions. Takes orders, documents orders, orders medications, receives medications, and administers medications.
NewMedical Technologist I (MT I) / Medical Laboratory Technician (MLT) - HPC Lab UNC HealthMedical Technologist I (MT I) / Medical Laboratory Technician (MLT) - HPC LabChapel Hill, NC$26.59–$38.23 / hourIf, however, you are presently an employee of another North Carolina agency and currently participate in TSERS or the ORP, you will be eligible to continue participating in those plans at UNC Health. Performs a variety of patient testing and administrative tasks in support of the clinical activities in the UNCHCS.
Maintenance Technician Asset LivingMaintenance TechnicianRaleigh, NC$18–$20 / hourin all directions, lifting and placing objects of 100+ lbs., communicate with others to exchange information, repeat motions that may include wrists, hands and/or fingers, operate machinery and power tools, operate motor vehicles and/or golf carts, assess the accuracy, neatness, and thoroughness of the work assigned, identify and inspect objects and areas, exposed to outdoor weather elements (wind, precipitation) including low and high temperatures and exposed to hazardous chemicals, and able to work overtime, weekends, night hours (on-call property emergencies). The employee is frequently required to ascend and descend ladders, stairs, ramps, step stools, etc., move self in different positions to accomplish tasks in various environments, including tight and confined spaces, traverse flat and uneven terrain, work in an overhead position and/or reaching, adjust or move objects of 100+ lbs.
Analytical Chemistry Laboratory Lead - Chemical Insights Research Institute UL Research InstitutesAnalytical Chemistry Laboratory Lead - Chemical Insights Research InstituteMorrisville, North CarolinaAs the Analytical Chemistry Laboratory Lead you will play a key role in the rapid growth of UL as you: Serve as the lead for analytical quality control of the Chemical Insights’ chemical libraries for high-throughput screening using nuclear magnetic resonance (NMR) spectroscopy and liquid chromatography-mass spectrometry (LC-MS), working in direct collaboration with the Chemical Library Manager to ensure chemical libraries are fully described in terms of identity, purity, and concentration. This role also serves as a collaborator on research projects by performing targeted analytical chemistry laboratory experiments, including the generation, analysis, and interpretation of experimental data, operation and maintenance of laboratory equipment, and preparation of data summaries and written reports for analytical chemistry results.
Chemical Pilot Plant Operator RTI InternationalChemical Pilot Plant OperatorResearch Triangle Park, North CarolinaFull timeClients rely on us to answer questions that demand an objective and multidisciplinary approach—one that integrates expertise across social, statistical, data, and laboratory sciences, engineering, and other technical disciplines to solve the world’s most challenging problems. As a Chemical Pilot Plant Technician, you’ll work at the intersection of research and real-world application—operating and troubleshooting pilot-scale systems that convert biomass into fuels, chemicals, and other valuable products.
Field Technician Astro PakField TechnicianRaleigh, North CarolinaAstro Pakis the nation's leading precision cleaning and passivation contractor specializing in on-site cleaning of high purity gas and fluid systems, as well as precision cleaning of components and hardware at the company’s Cleanroom facilities. As an Associate Field Technician, you’ll travel to cutting-edge facilities across the country while learning a specialized technical trade used in industries like aerospace, semiconductors, pharmaceuticals, and advanced manufacturing.
Utilities Maintenance Technician II (Industrial Utilities- DAYS) Novo Nordisk ASUtilities Maintenance Technician II (Industrial Utilities- DAYS)Clayton, NCExperience demonstrating a systematic approach to problem solving & troubleshooting based on data & facts preferred, to include active participation in driven event response activities and document problems & work to ensuring rapid resolution & prevent recurrence required. You will be joining Fill & Finish Expansions (FFEx), which is responsible for all major expansion activities within aseptic production, solid dosage forms, finished products, fill & finish warehousing, and QC across all production areas in Product Supply.
NewUtilities Maintenance Technician I/II (Electrical/Instrumentation-NIGHTS) Novo Nordisk ASUtilities Maintenance Technician I/II (Electrical/Instrumentation-NIGHTS)Clayton, NCYou will be joining Fill & Finish Expansions (FFEx), which is responsible for all major expansion activities within aseptic production, solid dosage forms, finished products, fill & finish warehousing, and QC across all production areas in Product Supply. Proficient in the operation and design production utility systems such as: purified water, process air, chemical storage, process waste systems, chilled water, clean and dirty steam, high pressure air, vacuum, air handling equipment Preferred.
Utilities Maintenance Technician II (Industrial Utilities- NIGHTS) Novo Nordisk ASUtilities Maintenance Technician II (Industrial Utilities- NIGHTS)Clayton, NCExperience demonstrating a systematic approach to problem solving & troubleshooting based on data & facts preferred, to include active participation in driven event response activities and document problems & work to ensuring rapid resolution & prevent recurrence required. You will be joining Fill & Finish Expansions (FFEx), which is responsible for all major expansion activities within aseptic production, solid dosage forms, finished products, fill & finish warehousing, and QC across all production areas in Product Supply.
Utilities Maintenance Technician II - Black Utilities Novo Nordisk ASUtilities Maintenance Technician II - Black UtilitiesClayton, NCProficient in the operation and design production utility systems such as: purified water, process air, chemical storage, process waste systems, chilled water, clean and dirty steam, high pressure air, vacuum, air handling equipment required. Experience demonstrating a systematic approach to problem solving & troubleshooting based on data & facts preferred, to include active participation in driven event response activities and document problems & work to ensuring rapid resolution & prevent recurrence required.
Tech 3, Maintenance - Process Technician FujifilmTech 3, Maintenance - Process TechnicianHolly Springs, North CarolinaAssociate degree in mechanical, electrical, chemical engineering or a related field• Prior maintenance experience in a pharmaceutical or manufacturing environment• Experience in Project Management or Lean Six Sigma• Experience mentoring or leading maintenance teams in a pharmaceutical or similar manufacturing environment . By end of 2025, we’ll open North America’s largest end-to-end CDMO biopharmaceutical manufacturing facility, offering drug substance production, fill-finish, and packaging under one roof.
Safety Technician AxelonSafety TechnicianDurham, NC$20–$24 / hourMust have knowledge of federal, state and local laws and regulations pertaining to hazardous material management; basic knowledge of chemistry and other related sciences; must understand basic chemical properties such that the individual can successfully segregate various waste substances for shipping or treatment; ability to utilize computer technology to access data, maintain records, generate reports; functional oral and written communication skills. Environments range from usual office conditions to environments where "immediately dangerous to life and health" (IDLH) atmospheres exist requiring the use of burdensome protective clothing and equipment.
Project Technician - Fire MSS Solutions, LLCProject Technician - FireZebulon, NCWork Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. At MSS, we value our employees by providing a supportive culture with competitive compensation and a benefits package that continues to evolve based on our business's growth and our employees' needs.
Entry Level Pest Control Technician - Raleigh, NC Anticimex CarolinasEntry Level Pest Control Technician - Raleigh, NCRaleigh, NCFull timeJoin our team at Clark's and spend your day helping other people in your community by solving their pest challenges, building long-term relationships with those you help, and protecting their homes and businesses. As a Pest Control Technician at Clark's Pest, you'll play a crucial role in maintaining the health and safety of our client's properties by effectively managing pest infestations.
BAS Controls Service Technician (Relocation assistance provided) MSS Solutions, LLCBAS Controls Service Technician (Relocation assistance provided)Zebulon, NCWork Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. Effectively documents work performed by completing necessary paperwork on each job to include: entering daily time, detailing scope of service progression, and maintaining an electronic database.
WASTEWATER SYSTEM TECHNICIAN II Cary, Town OfWASTEWATER SYSTEM TECHNICIAN IICary, NC$46,820.80–$57,600 / yearConsiderable knowledge of wastewater collection systems and their maintenance; considerable knowledge of specialized equipment operation; considerable knowledge of wastewater collection line construction and repair; knowledge of easement maintenance; knowledge of tree cutting; considerable knowledge of system mapping; considerable knowledge of GPS equipment; ability to work independently; ability to respond to emergencies; ability to operate heavy and specialized equipment; ability to develop and apply appropriate safety practices; ability to develop databases and keep accurate records; ability to make repairs; ability to communicate effectively. Participates in a comprehensive sewer line maintenance program keeping sewer lines open and working properly; Carries out preventative maintenance program; Operates jet-vac truck to clean storm drains and to clean commercial sewer lines identified from acoustic testing.
WASTEWATER SYSTEM TECHNICIAN I Cary, Town OfWASTEWATER SYSTEM TECHNICIAN ICary, NC$46,800–$69,076.80 / yearKnowledge of wastewater collection systems and their maintenance; Knowledge of specialized equipment operation; Knowledge of wastewater collection line construction and repair; Knowledge of easement maintenance; Knowledge of tree cutting and equipment operation; Knowledge of system mapping; Knowledge of GPS equipment; Ability to work independently; Ability to respond to emergencies; Ability to operate heavy and specialized equipment; Ability to develop and apply appropriate safety practices; Ability to develop databases and keep accurate records; Ability to work in adverse working conditions; Ability to make repairs; Ability to communicate effectively. as necessary; Performs acoustic testing operations to determine cleanliness of sewer mains; Responds to sewer odor calls; checks manholes for blockages and talks to homeowners; Performs rotating "on-call" after hours standby duty; Operates equipment during snow and inclement weather conditions; Performs other job-related tasks as required.
Power Generation Equipment Field Technician (Commercial Generators, Electrical Controls, Mechanical, Microgrid) Southern CoPower Generation Equipment Field Technician (Commercial Generators, Electrical Controls, Mechanical, Microgrid)Raleigh, NCLevel III Technician requires six years of field experience servicing generator systems with extensive experience on 500KW+, proficient with preventative maintenance, paralleling switch gear, ATS repairs, controller retrofits and Loadbanking equipment. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
Lead Maintenance Technician AvalonBay Communities IncLead Maintenance TechnicianDurham, NCEnsure vacant apartment homes and car garages are rent-ready in a timely manner including performing turnkey work, such as cleaning, carpet cleaning, appliance repair, caulking painting, and/or repairs to ensure apartment is ready for occupancy. This includes but is not limited to: Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.), and waste management systems.
Pharmacy Technician Part Time UnitedHealth Group IncPharmacy Technician Part TimeRaleigh, NC$16–$29 / hourThe fraudulent LinkedIn messages and emails, which do not originate from any Executives LinkedIn account or of UnitedHealth Group's email domains, or those of any of its operating divisions, supposedly conducts an interview via a Zoom meeting, offers a work from home job at Optum, emails an application, sends a fake check by next day delivery through USPS and asks recipients to pay a vendor a large dollar amount. Services include inpatient mental health and addiction treatment, for ages 18 and up with adult mood disorders, panic and anxiety, bipolar and personality disorders, PTSD and trauma, grief and loss, depression, suicidal thoughts, schizophrenia and substance abuse/chemical dependency.
Maintenance Technician Roscoe Property ManagementMaintenance TechnicianCary, NC$23–$27 / hourComplete grounds work as directed by Maintenance Manager and/or Community Manager which may include picking up trash, clean dumpster areas, trash rooms and trash chutes, blowing the parking area and sidewalks, removing debris, power washing, etc. Assist in pool maintenance and understand basic pool care (chemicals reading, making chemical adjustments, backwashing, pool cleaning, etc.).
Senior Manufacturing Technician - Sterile Injection - 1st Shift Alcami CorporationSenior Manufacturing Technician - Sterile Injection - 1st ShiftMorrisville, North CarolinaFull timeThis position entails a high level of technical expertise in aseptic processes requiring single-use components, leadership in troubleshooting, and responsibility for maintaining quality and compliance with Good Manufacturing Practices (GMP). The Senior Manufacturing Technician is a key role responsible for overseeing and executing advanced production tasks involving compound, fill and finish processes for sterile injectable pharmaceutical products executed via aseptic isolator technology.
Manufacturing Technician III - Sterile Injection - Weekend 1st Shift Alcami CorporationManufacturing Technician III - Sterile Injection - Weekend 1st ShiftMorrisville, North CarolinaFull timeThis position entails a high level of technical expertise in aseptic processes requiring single-use components, leadership in troubleshooting, and responsibility for maintaining quality and compliance with Good Manufacturing Practices (GMP). The Manufacturing Technician III is a key role responsible for overseeing and executing advanced production tasks involving compound, fill and finish processes for sterile injectable pharmaceutical products executed via aseptic isolator technology.
Floating Maintenance Technician Roscoe Property ManagementFloating Maintenance TechnicianRaleigh, NC$24–$27 / hourComplete grounds work as directed by Maintenance Manager and/or Community Manager which may include picking up trash, clean dumpster areas, trash rooms and trash chutes, blowing the parking area and sidewalks, removing debris, power washing, etc. Assist in pool maintenance and understand basic pool care (chemicals reading, making chemical adjustments, backwashing, pool cleaning, etc.).
Master Technician, Maintenance FUJIFILM Biotechnologies USA IncMaster Technician, MaintenanceHolly Springs, NCMechanical SME and Mentorship: Serves as the technical expert and trains or coaches other technicians while leading on-shift activities to drive operational success•Precision Repairs & Rebuilds: Executes precision mechanical repairs and rebuilds; and performs assembly swap and rotating spare change-outs of pumps (e.g., centrifugal, diaphragm, peristaltic), valves (ASEPCO, diaphragm, control valves), bioreactors, centrifuges, clean steam and WFI systems, seal replacements, bearings, alignment, couplings, and gaskets•Preventive & Predictive Maintenance: Executes failure-mode based PMs, performs vibration awareness, temperature monitoring, leak detection, and identifies bad actors and recurring failures•Troubleshooting & Reliability: Leads failure investigations, supports root cause analysis (RCA), and partners with Reliability Engineering•Installation & Commissioning: Installs and aligns equipment, supports commissioning, qualification & validation activities, and provides startup support•Safety & Risk: Executes lockout tagout (LOTO), manages stored energy hazards, and identifies and escalates unsafe conditions to champion a culture of safety and quality•GMP & Collaboration: Communicates effectively with peers and cross-functionally to drive results and ensure equipment and areas are in audit-ready state with complete and accurate GMP documentation•Performs other duties, as assigned. Expert knowledge of mechanical, electrical, and control systems•Demonstrated ability to read and interpret P&IDs, schematics, and technical drawings•Advanced knowledge of CGMP requirements•Effective communication, both written and oral•Ability to work in a team environment and train or mentor others while managing multiple priorities•Knowledge of Project Management principles•Strong time management and problem-solving skills and detail-oriented•Must be able to support 24/7 manufacturing facility, including shift, on-call and weekends Basic Requirements •High School Diploma•10+ years of maintenance or engineering experience in an industrial environment•5 years of maintenance experience in a pharmaceutical or similar manufacturing environment•Experience with Computerized Maintenance Management Systems (CMMS)•Experience with mechanical systems, process equipment, and utilities in a cleanroom environment•LOTO•GMP Documentation•Pump and seal rebuild•Valve maintenance Preferred Requirements •Associate degree in mechanical, electrical, chemical engineering or related field•Experience in Project Management or Lean Six Sigma•Certified Maintenance & Reliability Technician (CMRT) or similar•DeltaV, Building Management System (BMS), or Programmable Logic Controller (PLC) PHYSICAL REQUIREMENTSPHYSICAL DEMANDSWill work in environment which may necessitate respiratory protection.
NewSafety Technician Axelon Services CorporationSafety TechnicianDurham, NC$20–$24 / hourMust have knowledge of federal, state and local laws and regulations pertaining to hazardous material management; basic knowledge of chemistry and other related sciences; must understand basic chemical properties such that the individual can successfully segregate various waste substances for shipping or treatment; ability to utilize computer technology to access data, maintain records, generate reports; functional oral and written communication skills. Environments range from usual office conditions to environments where "immediately dangerous to life and health" (IDLH) atmospheres exist requiring the use of burdensome protective clothing and equipment.
Maintenance Technician (Full Time) Kisco Senior LivingMaintenance Technician (Full Time)Cary, NC$18–$20 / hourDiagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware ·accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems. Complete assigned service requests Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner.
Commercial Generator Preventative Maintenance Service Technician Southern CoCommercial Generator Preventative Maintenance Service TechnicianRaleigh, NCAbility to safely perform physical labor in an outdoor setting, including the physical demands of working in extreme hot and cold temperatures, and lifting and installing replacement parts, generator system components, batteries and other heavy objects. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
MEDICATION TECHNICIAN - HAYES BARTON PLACE Liberty Home Care and Hospice LLCMEDICATION TECHNICIAN - HAYES BARTON PLACERaleigh, NCp>Liberty Cares With Compassion Liberty Senior Living is currently seeking an experienced: MEDICATION TECHNICIAN (CNA) Job Description: Provides medication administration for residents. Takes orders, documents orders, orders medications, receives medications, and administers medications.
MEDICATION TECHNICIAN (CNA) - TEMPLETON OF CARY Liberty Home Care and Hospice LLCMEDICATION TECHNICIAN (CNA) - TEMPLETON OF CARYCary, NCLiberty Cares With Compassion Liberty Senior Living is currently seeking an experienced: MEDICATION TECHNICIAN (CNA) Job Description: Provides medication administration for residents. Takes orders, documents orders, orders medications, receives medications, and administers medications.
EMS Technician Wake County North CarolinaEMS TechnicianRaleigh, NCThe events in the test consist of unbuckling a seatbelt and exiting a vehicle from the driver's seat; stretcher lift simulation (using a 95-lb curl bar); stretcher movement with equipment 100ft (50ft down and 50ft back) over curb stops bolt to the floor; stretcher stair carry simulation (using a 95-lb curl bar); equipment lift and place; equipment movement/transfer (which includes kneeling 8 times); patient drag (using a 150-lb manikin strapped to a backboard) a total of 100ft; chest compressions (2 minutes of chest compressions at a rate of 120 a minute); repeat stretcher movement; climbing into the back of ambulance through side door. Hazmat Gear Requirements: Due to the unpredictability of the hazards encountered in the course of work, the applicant must be able to successfully fit test in, wear and perform essential job functions in respiratory personal protective equipment including, but not limited to, NIOSH-certified N95/P100 air-purifying respirators and a full-face tight-fitting respirator with the appropriate air-purifying cartridge.
Plant Engineering Technician - 12-hour Night Shift Cormetech IncPlant Engineering Technician - 12-hour Night ShiftDurham, NCPerform first-level troubleshooting of process and equipment issues; gather facts, samples, and observations to support root cause investigations; escalate concerns requiring engineering review. Support engineering trials and experiments by preparing materials and equipment, collecting samples and data, documenting observations, and following approved test plans.
Senior Maintenance Technician - Utilities (Waste Water Treatment) - Day Shift Amgen IncSenior Maintenance Technician - Utilities (Waste Water Treatment) - Day ShiftHolly Springs, NCThe Senior Operator/Mechanic works independently to maintain treatment system performance, monitor permit compliance parameters, and perform mechanical and electrical maintenance on wastewater treatment equipment including pumps, mixers, chemical feed systems, Dissolved Air Flotation (DAF) systems, instrumentation, controls, and associated utilities. In addition to the base salary, Amgen offers a Total Rewards Plan comprising health and welfare plans for staff and eligible dependents, financial plans with opportunities to save towards retirement or other goals, work/life balance, and career development opportunities including: Comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts.
Swimming Pool Technician Wake County North CarolinaSwimming Pool TechnicianRaleigh, NCThe Wake County Environmental Health & Safety team is seeking seasonal employees to help us with the more than 1,400 public swimming pools in Wake County, including city, apartment, and neighborhood facilities. The Swimming Pool Technician / Environmental Health Technician is responsible for protecting public health through the routine inspection of public swimming pools in Wake County by enforcing local regulations.
Environmental Health & Safety Technician Wolfspeed IncEnvironmental Health & Safety TechnicianDurham, NCObtain necessary information to assist Environmental Manager or Engineer(s) in identifying waste, waste generating process from internal generators then either assign to existing outbound waste profile or work with them to complete and submit new outbound profile. This Job is Right for You if You Have (Minimum Requirements): 3-years hazardous materials or waste experience either at LQG, TSDF, or in Field Services (ie: chemical cleanup, emergency services, HAZMAT responders, or similar) capacity.
Senior Maintenance Technician – Utilities (Waste Water Treatment) – Day Shift AmgenSenior Maintenance Technician – Utilities (Waste Water Treatment) – Day ShiftHolly Springs, North CarolinaThe Senior Operator/Mechanic works independently to maintain treatment system performance, monitor permit compliance parameters, and perform mechanical and electrical maintenance on wastewater treatment equipment including pumps, mixers, chemical feed systems, Dissolved Air Flotation (DAF) systems, instrumentation, controls, and associated utilities. In addition to the base salary, Amgen offers a Total Rewards Plan comprising health and welfare plans for staff and eligible dependents, financial plans with opportunities to save towards retirement or other goals, work/life balance, and career development opportunities including: Comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts.
Generator Field Technician (Commercial, LV/MV Electrical, Power Distribution, Mechanical, Microgrid, Data Center) Southern CoGenerator Field Technician (Commercial, LV/MV Electrical, Power Distribution, Mechanical, Microgrid, Data Center)Durham, NC$30–$47 / hourCommercialGenerators #Switchgear #LowVoltage #MediumVoltage #BatteryStorage #EnergyStorage #ATS #LoadBankTesting #PLCControls #Woodward #Beckwith. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
Lead Swimming Pool Technician Wake County North CarolinaLead Swimming Pool TechnicianRaleigh, NCThe Lead Swimming Pool Technician is a seasonal position that is responsible for protecting public health through overseeing the routine inspection of public swimming pools in Wake County by other seasonal staff, enforcing local rules and regulations involving swimming pools. Inspect public swimming pools, spas, and wading pools using chemical test kits to perform testing of Chlorine and pH levels.
NewLead Production Technician - 2nd Shift SinnovaTek IncLead Production Technician - 2nd ShiftNCJob Summary: The Lead Production Technician position is responsible for providing daily leadership, personnel guidance and support for production work. Work in various adverse conditions such as tight or enclosed spaces, heights, and temperature extremes to complete work assignments.
Research Technician University of North Carolina at Chapel HillResearch TechnicianChapel Hill, NCDepartment Biological and Genome Sciences - 428201 Career Area Research Professionals Posting Open Date 06/04/2026 Application Deadline 06/08/2026 Position Type Temporary Staff (SHRA) Position Title Research Technician Position Number 20055150 Vacancy ID S027605 Full-time/Part-time Full-Time Temporary Hours per week 40 Work Schedule. University employees can choose from a wide range of professional training opportunities for career growth, skill development and lifelong learning and enjoy exclusive perks that include numerous retail and restaurant discounts, savings on local child care centers and special rates for performing arts events.
Maintenance Technician AvalonBay Communities IncMaintenance TechnicianDurham, NCAs a maintenance technician, you will be the talented individual who: • Diagnoses and repairs problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.), and waste management systems. • Ability to identify cleaning and chemical supplies, ability to read and understand Hazard Communication Safety Data Sheets (SDS), ability to understand proper applications of chemicals and general cleaning supplies and ability to frequently handle these products.
Auto Glass Installation Technician Trainee Safelite Group, Inc.Auto Glass Installation Technician TraineeMorrisville, NCBe paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: Observing and assisting in installing and repairing auto glass. Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques.
Process Engineering Technician (Night Shift) Novo Nordisk ASProcess Engineering Technician (Night Shift)Clayton, NCProven expertise in planning/organization/execution of maintenance/production/process activities, following up on results & revising the work plan for complex problems being resolved by cross functional teams preferred. Our Product Supply Aseptic Manufacturing (PS AM) facility in Clayton, NC is a 457,000 square foot aseptic "fill and finish" site that is responsible for producing innovative, injectable diabetes and obesity treatments.
Medication Technician Sunrise Senior LivingMedication TechnicianRaleigh, NCAdminister, assist with, and observe medications and treatments for each resident using the medication administration record and the Six Rights of Medication Pass (“Right” resident, medication, dosage, time, route, right to refuse). Maintain and clean the Medication Room, medication carts, and treatment carts for neatness, cleanliness, availability of medications, and expired medications.
Exhibits Technician l The Museum of Life and ScienceExhibits Technician lDurham, NCResponsibilities: Perform daily upkeep, maintenance, and cleaning of museum exhibits, for both in and outside exhibit areas, accomplishing repairs to exhibits as necessary to help ensure that the exhibits continuously deliver safe, reliable, and satisfying interaction for our members and other guests. The Museum of Life Science is seeking an Exhibits Technician I to support the Museum's mission by keeping all exhibits in functioning order and completing repairs and maintenance to exhibits in a timely manner.
Parks Maintenance Technician I Harnett County, North CarolinaParks Maintenance Technician INCWORK ENVIRONMENT: The employee is subjected to inside and outside environmental hazards including exposures to noise, vibrations, proximity to moving mechanical parts, electrical current, working in high places, exposure to chemicals, fumes, odors, dusts, mists, gases, and oils. ESSENTIAL FUNCTIONS OF THE POSITION: Mows lawns; trims and edges around walkways, flower beds and fences; operates and maintains lawn mowers and some power and hand tools; cleans parking lots and walkways.
Line Technician- Part Time- Harnett Regional Jetport Harnett County, North CarolinaLine Technician- Part Time- Harnett Regional JetportNCWORK ENVIRONMENT: The employee works under both indoor and outside environmental conditions; is exposed to significant noise and vibrations and physical conditions such as proximity to moving mechanical part and electrical current; works in high places, narrow aisles, crawl spaces, and areas which could cause claustrophobia; and has exposure to high heat, chemicals, oils, fumes, dusts, odors, or poor ventilation. Semi-skilled work abilities related to the needs of clients and airport facilities; performs routine checks of the airport and is responsible for guiding, towing, parking, greeting and organizing aircraft that arrive and/or depart from the airport gate or ramp.
NewFloor Technician Owens Realty ServicesFloor TechnicianRaleigh, NCOur comprehensive roster of services efficiently and economically manages the operation of sophisticated real estate investment portfolios, residential apartment and condominium complexes, government buildings, educational facilities, corporate campuses, high-profile venues and family entertainment parks in both the public and private sector. Owens Realty Services portfolio includes over 25 million square feet of first class, high profile facilities in Connecticut, Florida, Georgia, Rhode Island, North Carolina, and New York with a value of more than $8 billion in real estate net worth and $30 million in gross annual revenue.