Inspection & Quality Technician 22nd Century Technologies, Inc. (TSCTI)Inspection & Quality TechnicianCharlotte, NCContractorFull timePerform independent audits and inspections of Burst House testing operations for Air Cooled products, including helium, and pressure based leak testing as applicable. Verify proper execution of leak checks, burst tests, and posttest inspections in accordance with approved work instructions, control plans, and engineering specifications.
Metallurgical Laboratory Technician Butler America AerospaceMetallurgical Laboratory TechnicianMonroe, NC$33–$40 / hourFull timeYou will execute specimen preparation, perform metallurgical evaluations, maintain test equipment, and ensure accurate, traceable digital data entry within the MES and QMS systems-directly supporting production readiness, quality compliance, and SPQDC performance. The ideal candidate brings strong attention to detail, precision in laboratory practice, familiarity with metal testing methods, and the ability to follow established procedures while supporting continuous improvement of material verification workflows.
Traveling Calibration Technician (Level 3) Trescal SATraveling Calibration Technician (Level 3)Cornelius, NCStrong knowledge of metrology practices and theories, analog and digital circuit analysis, Experienced in some or all of test and measurement equipment used in conjunction with the repair and calibration of electronic, mechanical, acoustical, chemical, thermal and/or dimensional devices, Possess strong troubleshooting and repair capabilities, and the ability to work on unique equipment with little or no product information, Proficient in Windows-based and laboratory automation software, Ability to apply basic statistical techniques necessary for measurement uncertainty analysis, Working knowledge of ISO/IEC 17025 and ANSI/NCSL Z540-1 requirements, Skilled in communication with customers and peers, including the ability to mentor and train. Our Mobile Calibration Technicians perform calibrations within our Mobile Calibration Lab and cover the areas of force, pressure, torque, temperature, infrared thermometry, dimensional, DC, and low frequency.
Calibration Technician I Transcat IncCalibration Technician ICharlotte, NCWith over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration.
Calibration Technician - Field (ETI) Accredited LabsCalibration Technician - Field (ETI)Huntersville, North CarolinaWe partner with established regional labs known for their deep community roots and long-standing customer trust and empower them with top-tier infrastructure and ISO/IEC 17025 accreditation. Calibrate, adjust, and troubleshoot problems with customers’ equipment, including electrical, mechanical, pressure, torque, environmental, dimensional, and radio frequency instrumentation.
Traveling Calibration Technician - Level 3 Trescal IncTraveling Calibration Technician - Level 3Cornelius, NCStrong knowledge of metrology practices and theories, analog and digital circuit analysis, Experienced in some or all of test and measurement equipment used in conjunction with the repair and calibration of electronic, mechanical, acoustical, chemical, thermal and/or dimensional devices, Possess strong troubleshooting and repair capabilities, and the ability to work on unique equipment with little or no product information, Proficient in Windows-based and laboratory automation software, Ability to apply basic statistical techniques necessary for measurement uncertainty analysis, Working knowledge of ISO/IEC 17025 and ANSI/NCSL Z540-1 requirements, Skilled in communication with customers and peers, including the ability to mentor and train. Our Mobile Calibration Technicians perform calibrations within our Mobile Calibration Lab and cover the areas of force, pressure, torque, temperature, infrared thermometry, dimensional, DC, and low frequency.
Instrumentation/Calibration Technician Mentor Technical GroupInstrumentation/Calibration TechnicianConcord, NCFull timeMentor Technical Group es un empleador que ofrece igualdad de oportunidades y todos los solicitantes calificados recibirán consideración para el empleo sin importar raza, color, religión, sexo, orientación sexual, identidad de género, información genética, origen nacional, estado de veterano protegido, estado de discapacidad o cualquier otro grupo protegido por ley. He / she may frequently work inside weather conditions, near moving mechanical parts, exposed to wet and or humid conditions, and an odorous atmosphere, may be exposed to fumes and the risk of electrical shock, and occasionally work on ladders in high places, in small spaces, such as lift/metering stations, manholes, tanks and wet wells.
ADAS Calibration and Diagnostic Technician PRO MOBILE SCAN LLCADAS Calibration and Diagnostic TechnicianCharlotte, NCFull timeTechnicians will complete pre and post repair diagnostic scans on vehicles before and after repairs are completed by the body shop using OEM or aftermarket scan tools or computers. Ability to use computers and tablets is required, a background in the automotive or collision industry is preferred but not required if a candidate has good technical aptitude and ability to learn quickly.
Sr Quality Technician - Metrologist BürkertSr Quality Technician - MetrologistHuntersville, North CarolinaGenerate and manage performance metrics for established KPIs, such as First Pass Yield (FPY), Scrap, Cost of Poor Quality (COPQ), Internal PPM, Overall Equipment Effectiveness (OEE) and Production Order Reliability. ASQ (American Society for Quality) Certifications such as Certified Quality Engineer (CQE) or Certified Calibration Technician (CCT), or ability to acquire within one year.
Sr Quality Technician - Metrologist Burkert GmbHSr Quality Technician - MetrologistHuntersville, NCGenerate and manage performance metrics for established KPIs, such as First Pass Yield (FPY), Scrap, Cost of Poor Quality (COPQ), Internal PPM, Overall Equipment Effectiveness (OEE) and Production Order Reliability. ASQ (American Society for Quality) Certifications such as Certified Quality Engineer (CQE) or Certified Calibration Technician (CCT), or ability to acquire within one year.
Sr Quality Technician - Metrologist Christian Burkert GmbH & Co KGSr Quality Technician - MetrologistHuntersville, NCGenerate and manage performance metrics for established KPIs, such as First Pass Yield (FPY), Scrap, Cost of Poor Quality (COPQ), Internal PPM, Overall Equipment Effectiveness (OEE) and Production Order Reliability. ASQ (American Society for Quality) Certifications such as Certified Quality Engineer (CQE) or Certified Calibration Technician (CCT), or ability to acquire within one year.
Metrology Technician - IndyCar Penske CorporationMetrology Technician - IndyCarMooresville, NCThe ideal candidate combines hands‑on metrology expertise with strong engineering judgement, process ownership, and the ability to translate complex measurement data into actionable insights across engineering, manufacturing, and race operations. Team Penske is seeking a highly skilled Metrology Engineer to join our team and grow our measurement, inspection, and build‑quality capabilities.
Metrology Technician IFab CorporationMetrology TechnicianGastonia,, NCFull timeDimensional & Visual Inspection: Perform first-piece, in‑process, and final inspections using CMM, height gauges, calipers, micrometers, bore gauges, and optical comparators. Metrology & CMM Support: Operate CMM equipment (Zeiss, Hexagon, Mitutoyo, etc.), load programs, verify alignments, and ensure accurate readings.
Protective Relay Technician Recore Electrical ContractorsProtective Relay TechnicianGastonia, NCWho we are : Recore Electrical Contractors, Inc. is a multi-state licensed, employee-owned , Electrical Services contractor, based just outside of Charlotte, North Carolina. Your role will involve the inspection, testing, troubleshooting, calibration, and repair of protective relays used in power generation, transmission, and distribution systems.
Automotive Quality Control Technician and Detailer Finks UnlimitedAutomotive Quality Control Technician and DetailerConcord, NCFull timePost-Repair Scans: Performing diagnostic scans after repairs to verify that all systems are functioning correctly, no new issues have arisen during the repair process, and all DTCs have been cleared. Documentation and Reporting: Maintaining detailed records of all scans, calibrations, and adjustments for each vehicle, including findings, actions taken, and proof of successful calibrations for insurance purposes.
Experienced Wireman P&C Field Services Technician WSP Global IncExperienced Wireman P&C Field Services TechnicianFort Mill, SCTechnical skills related to protective relays include relay calibration utilizing test sets/measuring devices such as Omicron CMC 256/356 and Doble F6150, control scheme testing, testing of the sensing CT/PT circuits, ability to upload settings to microprocessor relays, and static & dynamic testing of microprocessor-based protective relays. Minimum of 7 years of experience in the electrical testing industry, including experience in medium and high voltage circuit breakers, power transformers, instrument transformers, and substation protection and controls testing.
NewExperienced P&C Field Services Technician WSP Global IncExperienced P&C Field Services TechnicianCharlotte, NC$50–$70 / hourTechnical skills related to protective relays include relay calibration utilizing test sets/measuring devices such as Omicron CMC 256/356 and Doble F6150, control scheme testing, testing of the sensing CT/PT circuits, ability to upload settings to microprocessor relays, and static & dynamic testing of microprocessor-based protective relays. Successful applicants will be involved in projects with our PTE Team and be part of a growing organization solving problems and supporting client needs in electrical testing and commissioning in utility substations, industrial, and bulk electrical power systems.
Tool Room Technician Westinghouse Electric Co LLCTool Room TechnicianSC$19–$23 / hourAbout the role: We are currently looking for a Tool Room Technician to provide oversight for Tool Room, inventory, order, restock, distribute, test equipment, operate motorize pallet jack, operate forklift (stand-up/sit down), chemical inventory, print SDS labels, and more located in York, South Carolina. Perform quarterly continuity test and inspections on electrically powered tools per the color code chart and document to completion through work order.
Quality Control Lab Technician Asahi KaseiQuality Control Lab TechnicianCharlotte, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. . Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Quality Control Lab Technician Celgard, LLCQuality Control Lab TechnicianConcord, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Senior Optical Inspection Technician Celgard, LLCSenior Optical Inspection TechnicianConcord, North CarolinaOur products are used in a broad range of energy storage and other barrier-type applications, including lithium-ion batteries, lithium primary and other specialty battery solutions, technical textiles such as waterproof breathable apparel and medical personal protective equipment (PPE) and other specialty applications. We are currently seeking applications to fill the following job opening at Celgard where we develop and manufacture membrane battery separators that are critical components used in lithium-ion batteries for electric drive vehicles (EDVs) and energy storage systems (ESS).
Soils Laboratory Technician ECS LtdSoils Laboratory TechnicianCharlotte, North CarolinaECS is currently ranked #60 in Engineering News-Record’s Top 500 Design Firms (April 2026), #148 in Engineering News-Record’s Top 200 Environmental Firms (October 2025) and #50 in Zweig Group’s Hot Firm List (May 2025). Laboratory Activities : Perform specific tasks associated with conducting laboratory testing on construction materials for various projects under the supervision of senior technicians and other lab staff.
Electrical HSE Technician - Monroe, NC MMR GroupElectrical HSE Technician - Monroe, NCMonroe, NCFull timeOur diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. Certification which may be a plus: Certified Safety Professional (CSP), Associate Safety Professional (ASP), Occupational Health and Safety Technician (OHST), Construction Site Safety Technician (CSST), NFPA 70E knowledge.
Metallurgical Laboratory Technician ZobilityMetallurgical Laboratory TechnicianMonroe, NCYou will execute specimen preparation, perform metallurgical evaluations, maintain test equipment, and ensure accurate, traceable digital data entry within MES and QMS systems - directly supporting production readiness, quality compliance, and SPQDC (Safety, People, Quality, Delivery, Cost) performance. The ideal candidate brings strong attention to detail, precision in laboratory practice, familiarity with metal testing methods, and the ability to follow established procedures while supporting continuous improvement of material verification workflows.
Quality Control Lab Technician Asahi Kasei Advance AmericaQuality Control Lab TechnicianCharlotte, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Senior Optical Inspection Technician Bionique ScientificSenior Optical Inspection TechnicianConcord, North CarolinaOur products are used in a broad range of energy storage and other barrier-type applications, including lithium-ion batteries, lithium primary and other specialty battery solutions, technical textiles such as waterproof breathable apparel and medical personal protective equipment (PPE) and other specialty applications. We are currently seeking applications to fill the following job opening at Celgard where we develop and manufacture membrane battery separators that are critical components used in lithium-ion batteries for electric drive vehicles (EDVs) and energy storage systems (ESS).
Quality Control Lab Technician Bionique ScientificQuality Control Lab TechnicianConcord, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Senior Optical Inspection Technician Asahi Kasei Advance AmericaSenior Optical Inspection TechnicianConcord, North CarolinaOur products are used in a broad range of energy storage and other barrier-type applications, including lithium-ion batteries, lithium primary and other specialty battery solutions, technical textiles such as waterproof breathable apparel and medical personal protective equipment (PPE) and other specialty applications. We are currently seeking applications to fill the following job opening at Celgard where we develop and manufacture membrane battery separators that are critical components used in lithium-ion batteries for electric drive vehicles (EDVs) and energy storage systems (ESS).
HVAC Service/Start Up Technician Power DesignHVAC Service/Start Up TechnicianGastonia, North CarolinaThe Mechanical Service Technician provides support to Power Design projects by performing Mechanical work within a specified region. Provide weekly status updates on warranty calls, small projects and service work, service tickets, labor requirements and material requirements.
Electric Actuation Technician R.E. MasonElectric Actuation TechnicianCharlotte, North CarolinaAssociated work often includes the service/repair of associated control, isolation, regulator/relief valves, including valve instrumentation. Our strong company culture, and belief in continued investment in our Associates, has helped us realize long Associate tenures, as well as long lasting relationships with our customers.
Experienced (Lvl 2/3) Pressure Relief Valve Repair Technician R.E. MasonExperienced (Lvl 2/3) Pressure Relief Valve Repair TechnicianCharlotte, North CarolinaMason authorized repair facilities and customer locations and includes ; Pre-testing, disassembly, cleaning, in-process inspection, machining, lapping, surface preparation, painting, assembly, testing, and final inspection on various types of valves. Mason is a 100% employee-owned company that offers a comprehensive, industry leading benefits package to all eligible Associates: Participation in the Employee Stock Ownership Program (ESOP).
HVAC Service Technician Lennox InternationalHVAC Service TechnicianGastonia, North Carolina$39,000–$77,000 / yearFull timeWhat Drives Success: As an HVAC Service Technician, you will perform field activities associated with supporting the installation, maintenance and servicing of heating, ventilating and air conditioning systems for commercial customers. Who We Are: Lennox National Account Services (NAS), wholly owned by Lennox International, a 120+ year old company and a world leader in the Heating, Ventilation and Air Conditioning (HVAC) industry.
Control Technician 1 M.C. Dean IncControl Technician 1Charlotte, NCThe Control Technician 1 is responsible for the fabrication of control panels, field installation and commissioning procedures associated with control panels and field instrumentation, troubleshooting & calibration of field instruments, equipment and control panels, testing and analysis, documentation and updating drawings of finished control panels. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials.
Soils Laboratory Technician Engineering Consulting Services LtdSoils Laboratory TechnicianCharlotte, NCECS is currently ranked #60 in Engineering News-Record's Top 500 Design Firms (April 2026), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). Laboratory Activities: Perform specific tasks associated with conducting laboratory testing on construction materials for various projects under the supervision of senior technicians and other lab staff.
NewValve Technician R.E. MasonValve TechnicianCharlotte, NCMason authorized repair facilities and customer locations and includes; Pre-testing, disassembly, cleaning, in-process inspection, machining, lapping, surface preparation, painting, assembly, testing, and final inspection on various types of valves and actuators. This position offers the opportunity to develop advanced technical and mechanical skills through hands-on experience, continued training, and exposure to a wide variety of industrial equipment and customer applications.
NewLead P&C Field Services Technician WSP Global IncLead P&C Field Services TechnicianCharlotte, NC$70–$90 / hourAdvanced technical skills related to protective relays, including relay calibration utilizing test sets/measuring devices such as Omicron CMC 256/356 and Doble F6150, control scheme testing, testing of the sensing CT/PT circuits, ability to upload settings to microprocessor relays, and static & dynamic testing of microprocessor-based protective relays. Successful applicants will be involved in projects with our PTE Team and be a part of a growing organization that is solving problems and supporting client needs in electrical testing and commissioning in utility substations, industrial, and bulk electrical power systems.
Mechanic - Vehicle/Equipment Repair Technician II - Division 12 State of North CarolinaMechanic - Vehicle/Equipment Repair Technician II - Division 12NC$39,244–$68,679 / yearValid, current North Carolina driver's license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver''s license from their state of residence.). Work includes performance of a wide range of progressively responsible tasks involving the service, inspection, repair, rebuild and diagnosis of a diverse number of mechanical systems for a variety of gasoline, diesel, and alternative powered engines/equipment.
Control Technician 2 M.C. Dean IncControl Technician 2Charlotte, NCThe Control Technician 2 is responsible for the fabrication of control panels, field installation and commissioning procedures associated with control panels and field instrumentation, troubleshooting & calibration of field instruments, equipment, and control panels, testing and analysis, documentation and updating drawings of finished control panels. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials.
Quality Control Lab Technician Asahi Kasei Semiconductor, Inc.Quality Control Lab TechnicianCharlotte, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Senior Optical Inspection Technician Asahi Kasei Semiconductor, Inc.Senior Optical Inspection TechnicianConcord, North CarolinaOur products are used in a broad range of energy storage and other barrier-type applications, including lithium-ion batteries, lithium primary and other specialty battery solutions, technical textiles such as waterproof breathable apparel and medical personal protective equipment (PPE) and other specialty applications. We are currently seeking applications to fill the following job opening at Celgard where we develop and manufacture membrane battery separators that are critical components used in lithium-ion batteries for electric drive vehicles (EDVs) and energy storage systems (ESS).
Maintenance Technician Marbach America IncMaintenance TechnicianCharlotte, NCRemote maintenance, identifying necessary parts and customer site visits as required as well as other Marbach locations in the US and Mexico (Travel as needed based upon customer, service demands/needs). Able to independently resolve customer issues/needs with machines and come up with strategic solutions to better serve customer base.
HVAC Lab Technician - ADV BelcanHVAC Lab Technician - ADVCharlotte, NCProven ability in independently leading / running chillers, reporting the results, expert in loop tuning and drive test cycle / loop efficiency.* 5+ years of experience with hand/pneumatic tools, advanced shop mathematics, complex measuring equipment, precision measuring instruments and other toolsPreferred requirements:* AS or AAS in related technical field.* Individuals should be able to set up test environment, calibration and drive efficient chiller operation The ideal candidate will have extensive experience in testing and troubleshooting water- and air-cooled commercial chillers, as well as maintaining a safe and efficient lab environment.
Lab Technician - ADV BelcanLab Technician - ADVCharlotte, NCFamiliarity with HVAC operation, refrigerant handling, and EPA certification is a plus* Experience with pumps, VFDs, boilers, is a plus* LO/TO controls troubleshooting and Arc Flash training is helpful* Works under moderate supervision to support engineering testing of chillers.* Operates, inspects and maintains test setups and equipment to detect malfunctions* Familiarity with electrical work, including 460-3-60 machinery and medium voltage industrial power supplies.*
Equipment Services Technician UnitedHealth Group IncEquipment Services TechnicianCharlotte, NC$29–$52 / hourThe fraudulent LinkedIn messages and emails, which do not originate from any Executives LinkedIn account or of UnitedHealth Group's email domains, or those of any of its operating divisions, supposedly conducts an interview via a Zoom meeting, offers a work from home job at Optum, emails an application, sends a fake check by next day delivery through USPS and asks recipients to pay a vendor a large dollar amount. This is a hands-on position that requires solid debugging and troubleshooting skills within Electrical, Mechanical, Pneumatic and PLCs Install, setup, troubleshoot, and maintain various mail order pharmacy equipment and prototyping/testing new improvement projects.
Tool Room Technician Westinghouse NuclearTool Room TechnicianYork, SC$19–$23 / hourAt WECTEC Staffing Services, a wholly-owned subsidiary of Westinghouse Electric Company LLC, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while recognizing and encouraging the value of diversity in the global workplace. WECTEC Staffing Services delivers customer-focused solutions, offering everything from high-volume, cost-effective staffing to specialized niche roles, while maintaining best-in-class service.
Inspection & Quality Technician Technician - EXP StratAcuity Staffing Partners IncInspection & Quality Technician Technician - EXPCharlotte, NC$18–$20 / hourIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Perform independent audits and inspections of Burst House testing operations for air-cooled products, including helium and pressure-based leak testing as applicable.
NewField Service Technician, Night Shift (Mobile) - Charlotte, NC RivianField Service Technician, Night Shift (Mobile) - Charlotte, NCCharlotte, North Carolina$23–$34 / hourFull timeRivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian’s service providers, including providers of background checks, staffing services, and cloud services.
Automotive Quality Control Technician and Detailer Carolina's Collision AssociationAutomotive Quality Control Technician and DetailerConcord, North Carolina$16–$17.50 / hourPost-Repair Scans: Performing diagnostic scans after repairs to verify that all systems are functioning correctly, no new issues have arisen during the repair process, and all DTCs have been cleared. PRE-SCAN + POST-REPAIR SCANS Pre-Repair Scans: Conducting comprehensive diagnostic scans of vehicle systems before any repair work begins.
Automotive Technician Amentum Services IncAutomotive TechnicianCharlotte, NC$45,000–$75,000 / yearTest Operations Controls and Data Acquisition: individual shall have working knowledge of instrumentation / controls / data acquisition enough to support wind tunnel operation and programming of test sequences (Lab View experience or equivalent is a plus). Required skills needed for this position include: Vehicle mechanic: this position requires that the individual work on vehicle chassis set-up for wind tunnel testing, change tires, change shocks/struts, and install / remove any component on a vehicle.
Electronics Engineering Technician III - 3rd Shift Cummins IncElectronics Engineering Technician III - 3rd ShiftSCIn this role, you will make an impact in the following ways: Deliver high quality analytical results by expertly operating advanced instruments, performing precise physical analyses, and interpreting complex data to support engineering, quality, and manufacturing teams. To be successful in this role you will need the following: Strong technical discipline in data acquisition, including skill in preparing samples, following approved procedures, verifying equipment calibration, and producing accurate, trustworthy test data.