UNKNOWN

FEED

The ideal candidate should know advanced solid-state controls; oil systems safety controls; mechanical sub-cooling; introduction to head pressure controls for energy reduction; introduction to energy management systems (EMS); refrigeration rack oil systems; advanced de-frost diagnosis; and single and parallel compressor system start-up in a supermarket environment. Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, start-up, startup.

HOUR

CoolSys, Inc.

Traveling Start-Up Technician - Service

This role will focus on thin-film deposition systems-particularly sputtering and evaporation tools-as well as supporting related infrastructure in the HTS pilot line and characterization lab. Dedication to safety to mitigate industrial hazards that may include heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, and cryogenics.

Commonwealth Fusion Systems LLC

Equipment Technician

Rework, assembly, and repair of fine-pitch surface-mount components, including 0201, QFN, BGA, and micro-BGA packages, using microscopes and specialized rework equipment. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Singularity Defense

Senior Electrical Technician

ea_via_bold

Our longstanding history and industry-leading position speak to our success in providing CX solutions centered around the leaders in contact center solutions and strategic technology partners that empower organizations to actualize ROI and sustain a truly competitive advantage in a fast-changing CX environment. The collective experiences in leadership roles across firms enable CCS to bring passion, perspective, data-driven decision making to guide, advise, and support organizations throughout their CX journey.

CMM Inspector Technician-1st Shift

CAD Lab work will include design of models for printing, diagnostic (pre-treatment) planning wax-ups, Provisionals, try-ins, occlusal guards, implant abutments and superstructures, surgical guides, and denture tooth arrangements. Knowledge of all aspects of traditional denture laboratory processes is not required, but candidate must be able to perform simple removable laboratory procedures such as denture relines, repairs and fabrication of simple removable appliances.

Digital Dental Craftsmen

In-Clinic Technician

As an Assembly Technician, you are responsible for translating engineering intent into a physical robot - building precision mechanical subassemblies that meet exacting tolerances so NEO can move, learn, and operate safely alongside real people. Every robot that ships to a customers home passes through our hands first, and the precision of our work directly determines whether NEO performs safely and reliably in the real world.

1X Technologies

Assembly Technician - Robot Body

OTHER

We are seeking an experienced a Pharmacy Technician , you’ll play a vital role in supporting pharmacists and ensuring safe, efficient medication distribution. This role focuses on unit-dose preparation, medication handling, and sterile compounding in a hospital setting.

Talented Medical Solutions

Travel Pharmacy Technician

WorkWolf

Perform various manual tasks for extended periods, including light and heavy lifting, including consumer tires and wheels, standing, bending, and squatting. Your primary responsibilities will involve professionally servicing our guests' vehicles to ensure top-notch quality work and exceptional guest experience.

Team Car Care

General Service Technician

We are looking for an experienced Senior Engineering Technician to build, integrate, troubleshoot, and maintain complex robotic systems and engineering test assets. Working knowledge of Linux environments, shell commands, and Python for system bring-up, troubleshooting, test execution, and data collection.

Figure

Senior Engineering Technician

Compensation: $90,000.00 - $155,000.00 per year (includes hourly + commission) Responsibilities As a Midas automotive technician, you’ll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: Diagnostics using state-of-the-art computer systems. At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience.

YEAR

Midas Service Centers

Lead Automotive Technician/Mechanic

Deliver labeled, inspected prototypes that meet engineer-defined dimensional, fit, and functional criteria on agreed schedules; flag deviations before parts enter assembly or testing. Working closely with mechanical and manufacturing engineers, we use rapid prototyping to evaluate designs, resolve assembly issues, and improve how parts are made.

Prototype Technician

If you enjoy designing, building, problem-solving, and working with your hands , this is an opportunity to be involved from concept through production. Work with sales engineering and management to turn concepts into production-ready designs.

All Systems Electrical

Mechanical Design & Manufacturing Technician

Headquartered in Silicon Valley, California, Archer is a leader in the next-gen aerospace sector building an end-to-end advanced air mobility platform that delivers air taxis, unmanned aircraft systems ("UAS"), aviation-related physical artificial intelligence ("AI") solutions, and other technologies to customers worldwide across the commercial aerospace and defense sectors. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success.

Archer Aviation

Composite Technician

This role supports electrical, mechanical, pneumatic, hydraulic, and tooling systems to ensure equipment reliability, minimize downtime, and drive continuous improvement in safety, productivity, and quality. This position has a primary focus on electrical systems, PLCs, HMIs, drives, and control panels, while also requiring strong mechanical and machining expertise.

Clarkwestern Dietrich Building Systems LLC

Maintenance Technician

Design and install alignment fixtures, press and torque tooling, ergonomic operator stations, poka‑yoke devices, handling/transport fixtures, and automated end-of-line test rigs tied to build and test specs for aircraft, battery packs, and docks. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible.

Zipline

Lead Mechanical Engineer, Production Equipment

GreenHouseAPI

In this role, you’ll work closely with cross-functional teams to support rapid iteration and precision in vehicle development, leveraging your expertise in CNC operation, setup, machining, and fabrication to produce accurate and functional parts. We are helping an on-demand, autonomous ride-hailing company find a Model Maker Technician to bring innovative autonomous mobility solutions to life by creating high-quality prototypes and first articles.

Continuum Resource Network

Model Maker Technician

Daily responsibilities could include fluid component testing, pressure testing, metal fabrication, electrical installation and troubleshooting, hydraulic diagnostics, fluid system fabrication, lifting and rigging, welding, machine operation, and more. ITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Inversion

Senior Build and Integration Technician

In this hands-on role, you will partner directly with engineers to execute high-temperature experiments using benchtop furnaces and supporting lab equipment — work that is central to developing the novel materials inside Antora's thermal energy storage systems. Instrumentation & data collection: Install, configure, and operate DAQ systems, thermocouples, and other sensors to capture temperature profiles, environmental conditions, and material response data during experiments.

Akuna Capital for MIT students

Materials R&D Lab Technician

ADAPTED_NOW

Perform insertion loss, impedance testing on the products, and perform calibration of coaxial and waveguide components using VNA or Client 8510 network analyzers, other testing equipment or setups. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact.

ConsultNet

DC Assembly and Test Technician

Working under the guidance of the Prototype Team Lead, you will execute the day-to-day 3D printing workflow, set up laser cutting operations, maintain lab organization, and ensure high-quality prototype components are delivered reliably. You will regularly step in to execute assembly work for small manufacturing runs, assist with facility setup tasks, and maintain lab organization to ensure the team remains agile and supported.

Cad Technician Jobs in California

Traveling Start-Up Technician - Service CoolSys, Inc.

Equipment Technician Commonwealth Fusion Systems LLC

Senior Electrical Technician Singularity Defense

CMM Inspector Technician-1st Shift Ccs

In-Clinic Technician Digital Dental Craftsmen

Assembly Technician - Robot Body 1X Technologies

Travel Pharmacy Technician Talented Medical Solutions

General Service Technician Team Car Care

Senior Engineering Technician Figure

Lead Automotive Technician/Mechanic Midas Service Centers

Prototype Technician 1X Technologies

Mechanical Design & Manufacturing Technician All Systems Electrical

Composite Technician Archer Aviation

Maintenance Technician Clarkwestern Dietrich Building Systems LLC

Lead Mechanical Engineer, Production Equipment Zipline

Model Maker Technician Continuum Resource Network

Senior Build and Integration Technician Inversion

Materials R&D Lab Technician Akuna Capital for MIT students

DC Assembly and Test Technician ConsultNet

Additive Manufacturing Technician Droyd

Similar Job Searches

Stand out to leading employers.