NewStaff Electrical Engineer - Sustainable Water Infrastructure Kennedy JenksStaff Electrical Engineer - Sustainable Water InfrastructurePasadena, CAAs part of a team that prides itself on exceptional client service and continuous improvement, this position offers a chance to significantly impact environmental infrastructure while fostering career development in an engaging workplace.#J-18808-Ljbffr. Kennedy Jenks Consultants based in Pasadena, California is seeking an experienced Staff Electrical Engineer to enhance water and wastewater infrastructure projects.
Electrical Engineer Starship Avionics Space Exploration Technologies CorpElectrical Engineer Starship AvionicsHawthorne, CA$105,000–$122,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. The Starship team supports the mission to revolutionize orbital flight and space travel- opening access for humankind to establish new frontiers in space and ultimately become a multi-planetary species.
NewSenior Electrical Engineer Lead Water Infrastructure (Hybrid) Kennedy JenksSenior Electrical Engineer Lead Water Infrastructure (Hybrid)Pasadena, CA$115,000–$165,000 / yearThe role involves electrical engineering for water and wastewater infrastructure, ensuring optimal project execution and technical leadership. Candidates must have a Bachelor's or Master's degree in Electrical Engineering and relevant experience, with a strong focus on project lifecycle management.
Avionics Systems Engineer CX2Avionics Systems EngineerEl Segundo, CaliforniaThey are comfortable working directly with avionics hardware, electrical systems, Linux-based computers, embedded devices, and networked systems, and can independently diagnose issues at the component, subsystem, and UAS levels. This is a hand-on role responsible for bringing together flight-critical hardware, mission systems, sensors, payloads, communications equipment, and software into fully operational aircraft ready for ground and flight testing.
NewElectrical Engineer, Space Systems & Power Electronics (Hybrid) Honeywell Aerospace US LLCElectrical Engineer, Space Systems & Power Electronics (Hybrid)Glendale, CAHoneywell Aerospace US LLC is seeking an Advanced Electrical Engineer to lead design and development of complex electrical systems at our Phoenix, AZ hybrid site. The role requires a BS (or MS) in Electrical Engineering, 4+ years in analog circuit design, and U.S. citizenship for contractual reasons.#J-18808-Ljbffr.
Manager, Avionics Mechanical Engineer Impulse Space Propulsion Inc.Manager, Avionics Mechanical EngineerRedondo Beach, CA$140,000–$190,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Work closely with electrical engineering, RF engineering, optics, manufacturing, integration and test, vehicle engineering, GNC, thermal analysts, dynamics analysts, and harness design teams.
NewSenior Electrical Engineer - Mission Critical Data Centers (Hybrid) DLR GroupSenior Electrical Engineer - Mission Critical Data Centers (Hybrid)Los Angeles, CAThis role involves designing and implementing electrical systems for complex facilities, including data centers, and requires 10+ years of relevant experience. A leading integrated design firm in Los Angeles seeks an experienced Electrical Engineer for Mission Critical Projects.
Lead Electrical Engineer (Avionics) Impulse Space Propulsion Inc.Lead Electrical Engineer (Avionics)Redondo Beach, CA$145,000–$175,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. You will manage a team of talented electrical engineers who design and test custom circuit boards, working to rapidly develop high reliability electronics.
NewElectrical Engineer - Hands-on DAC & High-Power Systems Deep SkyElectrical Engineer - Hands-on DAC & High-Power SystemsLos Angeles, CADeep Sky in Los Angeles is seeking an Electrical Engineer to join our R&D Engineering Team onsite to design, analyze, prototype, and integrate electrical and electromechanical systems for Direct Air Carbon Capture reactors and the supporting test infrastructure. You will build high‑power electronics, drive system trades, and lead qualification testing, with a hands‑on approach across multi‑disciplinary teams in a fast‑paced environment.#J-18808-Ljbffr.
Avionics Integration & Test Engineer Starshield Space Exploration Technologies CorpAvionics Integration & Test Engineer StarshieldHawthorne, CA$105,000–$122,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. They must have a deep working knowledge of the satellite''s electrical architecture, factory checkouts, and the ability to investigate failed electrical hardware to determine root cause via telemetry and hardware investigations.
Senior Electrical Engineer Tetra Tech IncSenior Electrical EngineerPasadena, CA$140,000–$190,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Please note that Tetra Tech considers various factors in determining pay, including but not limited to: education, relevant and demonstrated work experience in the role, skills, geographic location, qualifications, certifications, and other competencies relevant to the needs of the business.
Sr. Mechanical Engineer Starship Avionics Space Exploration Technologies CorpSr. Mechanical Engineer Starship AvionicsHawthorne, CA$130,000–$180,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. The Starship team supports the mission to revolutionize orbital flight and space travel, opening access for humankind to establish new frontiers in space and ultimately become a multi-planetary species.
SR. Electrical Engineer Essel EnvironmentalSR. Electrical EngineerSanta Fe Springs, CAYou will create electrical schematics, will write PLC/HMI programs, and will participate in the debugging, testing, and commissioning of custom machinery that include motion systems, heaters, pumps, and automated hoists. Have you gained significant experience in designing electrical system layouts, electrical panel designs and control programs with great quality, accuracy, and timeliness and are looking to expand your skill set?.
Sr. Avionics Test Engineer Starshield Space Exploration Technologies CorpSr. Avionics Test Engineer StarshieldHawthorne, CA$140,000–$205,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Work closely with and consistently provide feedback to responsible design engineers, manufacturing engineers, and test lab teams to drive innovation in design and infrastructure to increase product reliability and yield.
NewElectrical Engineer Arc BoatsElectrical EngineerTorrance, CaliforniaAs an Electrical Engineer, you will be working full-time in our Torrance office on the Commercial Systems team reporting to our head of commercial systems and working on designing new electric and hybrid propulsion systems to make port operations cheaper, quieter, and less emissive. Now we’re extending our platform to commercial applications, starting with tugs, ferries, and defense, with years worth of signed contracts and a pipeline that spans every vessel type on the water.
Mechanical Engineer Starship Avionics Space Exploration Technologies CorpMechanical Engineer Starship AvionicsHawthorne, CA$95,000–$115,000 / yearRESPONSIBILITIES: Design custom instrumentation for extreme thermal, dynamic and pressure environments Design integrated product solutions for fluid and electro-mechanical assemblies Participate in the manufacturing line, being hands on with processes including pressure testing, thermal testing, laser welding and more Perform thermal, structural, and tolerance analysis for mechanical assemblies using both hand calculations and finite element analysis Participate in initial mechanical design, 3D modeling, creation of production drawings and maintenance of design data Conduct failure analysis of components as it relates to thermal, loads, vibration and shock Interface with machine shops and production teams to ensure final designs can be produced in accordance with overall project goals Lead design reviews internally and participate in reviews with suppliers and partners. PREFERRED SKILLS AND EXPERIENCE: Self-motivated with strong organizational, written, and oral communication skills Experience with CAD and FEA software packages Proficient and frequent use of hand calculations, finite element analyses (FEA), and computer-aided designs (CAD) Exposure to high volume production designs with a focus on design for manufacturability Exposure to designing for high vibration environments and high pressure environments Demonstrated understanding of structural analysis and failure modes Working knowledge of thermal and structural FEA studies Experience with fatigue and thermal testing of electro-mechanical assemblies Solid understanding and application of GD&T Experience working with PCB designers and exposure to PCB layout.
Spacecraft Avionics Engineer (Early) Apex TechnologySpacecraft Avionics Engineer (Early)Los Angeles, California$105,000–$135,000 / yearSystem Integration: Collaborate with cross-functional teams, including mechanical engineers, systems engineers, and software engineers, to ensure seamless integration of avionics subsystems into the satellite platform. Electrical Board Design: Design and create electrical boards, including printed circuit boards (PCBs), considering electrical component placement, signal routing, and manufacturability.
Propulsion Engineer, Avionics Manufacturing Raptor Space Exploration Technologies CorpPropulsion Engineer, Avionics Manufacturing RaptorHawthorne, CA$100,000–$117,500 / yearAs propulsion engineer on the Raptor avionics manufacturing team, you will be working to development, qualification, automation various manufacturing and test processes as well as scale up our in-house production capability across a wide range of avionics hardware including PCBAs, sensors, harnessing, and more. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewAvionics Hardware Engineer (All Levels) Castelion CorporationAvionics Hardware Engineer (All Levels)Torrance, CaliforniaTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We design, build, and test next-generation long-range strike weapon systems to give the United States and its Allies a decisive advantage and deter future conflicts.
Avionics Launch Vehicle Engineer The Aerospace CorpAvionics Launch Vehicle EngineerCA$117,300–$226,900 / yearDSG is unique at Aerospace as it not only directly supports major customers, including United States Space Force, United States Space Command, Air Force Material Command, and senior leadership at the Pentagon, but also provides a broad range of services and support across the national space enterprise, maintaining vertical responsibilities with customers but also horizontal, matrixed responsibilities across the corporation. The Defense Systems Group (DSG) provides analysis-based decision support to senior leaders on space architectures, policy and strategy, developmental planning, system of systems engineering, and threat reduction to help shape future space missions across the national security space enterprise.
NewSenior Avionics Systems Integration Engineer Castelion CorporationSenior Avionics Systems Integration EngineerTorrance, CaliforniaTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale.
Spacecraft Integration Specialist (Avionics) Impulse Space Propulsion Inc.Spacecraft Integration Specialist (Avionics)Redondo Beach, CA$110,000–$140,000 / yearthermal vacuum vibration EMIEMC as requiredMaintain compliance with quality safety and configuration management processesMinimum QualificationsHigh School Diploma or equivalent4 years of experience in avionics testing spacecraft testing or related aerospace systemsHands-on experience with spacecraft or high-reliability avionics hardware and associated test systems EGSEStrong understanding of digital and analog electronicsExperience developing and executing test proceduresProficiency using electrical test and measurement equipmentAbility to read and interpret electrical schematics wiring diagrams and interface control documents ICDsStrong troubleshooting and problem-solving skillsAbility to work independently and in a team-based environmentPreferred Skills and ExperienceBachelors degree in Electrical Engineering Aerospace Engineering or a related technical field or equivalent practical experience7 Experience with spacecraft flight hardware and mission-critical systemsFamiliarity with common spacecraft avionics architectures and data buses e.g. ResponsibilitiesDevelop execute and document avionics test procedures for spacecraft and subsystemsPerform functional interface and system-level testing of flight and flight-like hardwareSupport integration of avionics component payloads sensors cables and harnessingOperate and troubleshoot test equipment such as EGSE oscilloscopes logic analyzers DMMs and power suppliesMaintain spacecraft control racks RF control racks and other EGSE required to operate the spacecraftIdentify diagnose and resolve hardware software and system-level anomaliesCollaborate with engineering teams to support test readiness reviews anomaly resolution and configuration controlGenerate test reports discrepancy reports and contribute to qualification and acceptance documentationSupport environmental testing e.g.
NewAvionics Reliability Engineer Castelion CorporationAvionics Reliability EngineerTorrance, CaliforniaThis position is ideal for engineers who want hands-on ownership of environmental testing infrastructure and reliability processes while working closely with avionics design and manufacturing teams to rapidly mature flight hardware. This role is responsible for developing and executing reliability test strategies, including HALT/HASS campaigns, and driving hardware improvement through deep failure analysis and cross-functional collaboration.
PCB Designer, Avionics Falcon & Dragon Space Exploration Technologies CorpPCB Designer, Avionics Falcon & DragonHawthorne, CA$100,000–$120,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You will work with your mechanical engineer counterparts to determine fastener and EEE component placement to ensure your PCB design can survive the harsh environments experienced by a spacecraft (thermal, shock, vibe, EMI, etc).
Manager, Avionics Mechanical Engineer Impulse SpaceManager, Avionics Mechanical EngineerRedondo Beach, CA$140,000–$190,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Work closely with electrical engineering, RF engineering, optics, manufacturing, integration and test, vehicle engineering, GNC, thermal analysts, dynamics analysts, and harness design teams.
Flight Software Engineer Impulse Space Propulsion Inc.Flight Software EngineerRedondo Beach, CA$120,000–$180,000 / yearMinimum QualificationsBachelors degree in Computer Science Computer Engineering Electrical Engineering or related degrees 4 years writing CC code for an embedded system or vehicle of some kind robot car drone spacecraft etcDemonstrated understanding of computer architecture operating systems data structures and computer networkingExperience with Real Time Operating Systems RTOS or with Embedded LinuxExperience using version control test cases and other software best practicesPreferred Skills and ExperienceProven track record delivering flight software for spacecraft- including launch vehicles OTVs upper stages or other in-space propulsion systems. ResponsibilitiesContribute to the design implementation integration and verification of software forGuidance Navigation and Control GNC algorithmsCommand and telemetry handlingMission sequencing autonomy and fault managementClosed-loop control of propulsion attitude control and other time-critical systemsImplement features for Impulses real-time flight software framework to meet deterministic performance requirements in space environments.
Spacecraft Avionics Engineer (Mid) Apex TechnologySpacecraft Avionics Engineer (Mid)Los Angeles, California$125,000–$155,000 / yearSystem Integration: Collaborate with cross-functional teams, including mechanical engineers, systems engineers, and software engineers, to ensure seamless integration of avionics subsystems into the satellite platform. Electrical Board Design: Design and create electrical boards, including printed circuit boards (PCBs), considering electrical component placement, signal routing, and manufacturability.
Avionics Systems Engineer - Flight Safety Systems (Fts / Afss) HermeusAvionics Systems Engineer - Flight Safety Systems (Fts / Afss)Los Angeles, CA$91,800–$224,250 / yearAbout The Role: As an Avionics Systems Engineer, you will be responsible for owning the design, integration, testing, and certification of the Flight Termination System (FTS) hardware and software for advanced flight vehicles. You will work closely with cross-functional teams across avionics, electrical, mechanical, and ground systems engineering to ensure seamless system integration and compliance with range safety requirements.
NewLead Avionics Test Engineer Castelion CorporationLead Avionics Test EngineerTorrance, CaliforniaIn this role, you will set technical direction, mentor engineers, and drive test infrastructure, automated test equipment (ATE), integration, validation, and performance characterization across power electronics, digital interfaces, RF assemblies, motion control, and flight avionics. You will design fixtures, build automated test stations, support DVT and qualification, and define the test performance envelope for components, circuit cards, and integrated sub-systems.
Staff Electrical Engineer CHAOS IndustriesStaff Electrical EngineerEl Segundo, CaliforniaThe ideal candidate is a digital circuit designer with strong hands-on board design experience, practical signal integrity and power integrity judgment, and the ability to coordinate complex technical tasks across FPGA, software, RF, power, mechanical, manufacturing, and test teams with little supervision. CHAOS is seeking a Staff Electrical Engineer with expertise in digital circuit design and signal integrity analysis to lead the design and integration of high-reliability digital electronics for aerospace and military applications.
Avionics Test Engineer, Hardware Apex Technology Inc.Avionics Test Engineer, HardwareLos Angeles, CAYou'll work closely with electrical, mechanical, RF, and systems engineers to build and operate integrated spacecraft test environments, execute qualification campaigns, and troubleshoot flight hardware throughout development and integration. In this role, you'll focus on hardware integration and testing, system-level and component-level test rack planning and buildup, avionics validation, and automated spacecraft test execution.
Integration Engineer - Avionics HermeusIntegration Engineer - AvionicsLos Angeles, CA$138,550–$224,250 / yearEstablish and maintain build roadmaps for assemblies you own; to ensure alignment between key stakeholders, drive hardware and tooling on-time deliveries, minimize build serialization, and escalate and eliminate blockers. Collaborate with integrated product teams to ensure system-level avionics design meets needs for structures, propulsion, and software systems integration and test.
Avionics Hardware Development Engineer Apex Technology Inc.Avionics Hardware Development EngineerLos Angeles, CAFor the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life.
Avionics Manufacturing Engineer (PCB and PCBA) Impulse SpaceAvionics Manufacturing Engineer (PCB and PCBA)Redondo Beach, CA$120,000–$145,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As an Avionics M anufacturing Engineer at Impulse (PCB and PCBA) , you will provide deep technical expertise on PCB and PCBA technology for spaceflight.
NewSystems Integration & Test Engineer, Avionics (All Levels) Castelion CorporationSystems Integration & Test Engineer, Avionics (All Levels)Torrance, CaliforniaIn this role, you will own test requirements, automated test equipment (ATE) development, integration, validation, and performance characterization across domains including power electronics, digital interfaces, RF assemblies, motion control, and flight avionics. You will design fixtures, build automated test stations, support DVT and qualification, and define the test performance envelope for components, circuit cards, and integrated sub-systems.
Senior Avionics Test Engineer Castelion CorporationSenior Avionics Test EngineerTorrance, CaliforniaIn this role, you will own test requirements, automated test equipment (ATE) development, integration, validation, and performance characterization across domains including power electronics, digital interfaces, RF assemblies, motion control, and flight avionics. You will design fixtures, build automated test stations, support DVT and qualification, and define the test performance envelope for components, circuit cards, and integrated sub-systems.
Avionics Mechanical Engineer (All levels) Impulse SpaceAvionics Mechanical Engineer (All levels)Redondo Beach, CA$115,000–$150,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Lead and contribute to CoDRs, PDRs, and CDRs, clearly communicating design rationale, tradeoffs, and risks to cross-functional stakeholders.
Senior Certification Design Engineer Teledyne Technologies IncSenior Certification Design EngineerEl Segundo, CA$113,600–$151,400 / yearThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing.
Senior Embedded Firmware Engineer (Avionics / Platform Interface) ProtingentSenior Embedded Firmware Engineer (Avionics / Platform Interface)Pasadena, CA$160,000–$200,000 / yearCustomize and integrate Jetson Linux platforms, including boot chain configuration, device tree updates, kernel bring-up, and MCU-to-Jetson interfaces. Customize and integrate Jetson Linux platforms, including boot chain, device tree, kernel bring-up, and MCU to Jetson interfaces.
Electrical Engineer, Sensors (Starship Avionics) Space Exploration TechnologiesElectrical Engineer, Sensors (Starship Avionics)Hawthorne, CA$105,000–$120,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Electrical Engineer (Starship Avionics) SpaceXElectrical Engineer (Starship Avionics)Hawthorne, CA$105,000–$122,500 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. The Starship team supports the mission to revolutionize orbital flight and space travel- opening access for humankind to establish new frontiers in space and ultimately become a multi-planetary species.
Electrical Engineer (Starship Avionics) Space Exploration TechnologiesElectrical Engineer (Starship Avionics)Hawthorne, CA$105,000–$122,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. The Starship team supports the mission to revolutionize orbital flight and space travel- opening access for humankind to establish new frontiers in space and ultimately become a multi-planetary species.
NewSenior Avionics Electromechanical Manufacturing Engineer CastelionSenior Avionics Electromechanical Manufacturing EngineerTorrance, CACastelion is seeking a Senior Manufacturing Engineer in Torrance, CA, to develop and optimize manufacturing processes for avionics and electromechanical systems. Ideal candidates will have extensive experience in aerospace manufacturing engineering, especially with avionics systems.
NewMilitary Quality Engineer - Avionics & PPGMilitary Quality Engineer - Avionics &Los Angeles, CAPPG Industries, Inc in Los Angeles is seeking a Quality Engineer to support the F35 program by analyzing government-owned canopies and provide ongoing quality engineering support. The position offers a competitive base salary between $98,000 and $110,000 plus an annual bonus opportunity, along with comprehensive benefits including health, dental, retirement plans, and more.#J-18808-Ljbffr.
NewAvionics Hardware Engineer Intern - Fall 2026 CastelionAvionics Hardware Engineer Intern - Fall 2026Los Angeles, CAThe intern will take ownership of circuit board design and collaborate cross-functionally to support rapid prototyping and real-world flight tests. Castelion in Los Angeles is seeking an Electrical Engineering Intern for Fall 2026 to help design, build, and test advanced missile systems.
Production Engineer Starship Electronics Space Exploration Technologies CorpProduction Engineer Starship ElectronicsHawthorne, CA$95,000–$115,000 / yearPREFERRED SKILLS AND EXPERIENCE: • Experience with sharing information and influencing others across organizational lines • Experience working both autonomously and as a team in a highly demanding environment • Strong written and verbal communication skills, ability to make presentations to engineering, team members, internal customers and management • Proficient in mechanical design tools and analysis, including but not limited to mechanical CAD, FEA, GD&T/drawing creation, and tolerance stack analysis • Experience with PCB fabrication or PCBA assembly processes, equipment, and design-for-manufacturing (DFM) requirements • Experience with electro-mechanical assembly processes, equipment, and design-for-manufacturing (DFM) requirements • Experience designing production systems for controllers, sensors, cameras, optics, or long-range RF communications, as demonstrated by successful fielding of multiple products • Experience with process failure modes and effects analysis (PFMEA), with demonstrated corrective actions to reduce process risk and increase process control • Experience introducing capital equipment / automating processes, including process control and preventative maintenance plans • Experience working in a high-volume or high-reliability manufacturing environment • Proficiency in pulling and manipulating data via one or more programming languages (eg. fixturing) as well as capital automation equipment • Develop design-for-manufacturing (DFM) guidelines and maintain a collaborative relationship with design engineering to co-design the product and factory • Act as an expert on low-cost, high-reliability manufacturing techniques for aerospace electro-mechanical components • Guide high-level vehicle architecture and requirements trade studies to reduce vehicle cost and ease of production • Analyze root cause and provide corrective actions for process escapes or process variability, including mechanical processes on the final assembly (e.g.
Spacecraft Avionics Lead Apex Technology Inc.Spacecraft Avionics LeadLos Angeles, CAYou'll stay hands on and take hardware from clean sheet through flight and into scalable production, working closely with software, GNC, mechanical, and production teams to ensure reliable and repeatable spacecraft builds. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses.
NewAvionics Manufacturing Specialist (PCBA) Castelion CorporationAvionics Manufacturing Specialist (PCBA)Torrance, CaliforniaAs an Avionics Manufacturing Specialist, you will work closely with engineering and manufacturing teams to execute highly technical electrical builds, while owning critical aspects of tooling, process development, work instruction creation, and test infrastructure. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Sr. Avionics Development Technician Long WallSr. Avionics Development TechnicianEl Segundo, CaliforniaAvionics technicians are responsible for a broad range of responsibilities, including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and performing software-driven tests. Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists.
Senior Electro-Optical Engineer Impulse Space Propulsion Inc.Senior Electro-Optical EngineerRedondo Beach, CA$180,000–$250,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. 6+ years of experience developing complex hardware systems in at least one relevant domain: camera systems, embedded imaging systems, electro-optical payloads, opto-mechanics, or optical systems.