NewEngineering Electronics Technician - 100% Travel System OneEngineering Electronics Technician - 100% TravelAlbuquerque, NMRemote$25–$35 / hourTest and troubleshoot electrical components by applying the theory of operation of transistors, solid state components, integrated circuits, motors, servos, power transmissions, and other electrical devices utilizing electrical schematics, wiring diagrams, blueprints, color codes, publications, and other technical data. Primary responsibilities include preparing sites for rack installations, running power and fiber circuits, installing cabling and equipment (NVR, IPVCS, APC, LTE antennas), and supporting conduit and cable tray installations.
Mechanical Assembly Technician Federal Signal OpeningsMechanical Assembly TechnicianAlbuquerque, New MexicoThis work will include, but may not be limited to assembling and installing components and subassemblies onto equipment being manufactured using a variety of methods and techniques such as drilling, tapping, punching, machining, wiring, low-voltage electrical, hydraulic plumbing (hard line and hose) and testing of the equipment according to design specifications. SKILLS – ability to perform specific technical tasks using normal tools used in equipment assembly such as the layout / termination / connection of wiring and plumbing, lay-out and installation of mechanical equipment and performing operational testing (and repair modification if required) of completed assemblies.
Mechanical Assembly Technician Federal Signal CorpMechanical Assembly TechnicianAlbuquerque, NM$23–$28 / hourThis work will include, but may not be limited to assembling and installing components and subassemblies onto equipment being manufactured using a variety of methods and techniques such as drilling, tapping, punching, machining, wiring, low-voltage electrical, hydraulic plumbing (hard line and hose) and testing of the equipment according to design specifications. SKILLS - ability to perform specific technical tasks using normal tools used in equipment assembly such as the layout / termination / connection of wiring and plumbing, lay-out and installation of mechanical equipment and performing operational testing (and repair modification if required) of completed assemblies.
Assembly, Integration and Test Technician LeidosAssembly, Integration and Test TechnicianAlbuquerque, New MexicoSolutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. June 10, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Mechanical Assembly Technician Ground ForceMechanical Assembly TechnicianAlbuquerque, NMFull timeThis work will include, but may not be limited to assembling and installing components and subassemblies onto equipment being manufactured using a variety of methods and techniques such as drilling, tapping, punching, machining, wiring, low-voltage electrical, hydraulic plumbing (hard line and hose) and testing of the equipment according to design specifications. SKILLS – ability to perform specific technical tasks using normal tools used in equipment assembly such as the layout / termination / connection of wiring and plumbing, lay-out and installation of mechanical equipment and performing operational testing (and repair modification if required) of completed assemblies.
Assembly, Integration and Test Technician Leidos Holdings IncAssembly, Integration and Test TechnicianAlbuquerque, NM$35,750–$64,625 / yearSolutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Mechanical Assembly Technician VIP StaffingMechanical Assembly TechnicianAlbuquerque, New Mexico$20–$25Mechanical Assembly Tech candidates must meet the following requirements for consideration:Highschool Diploma or GED; or three to six months related experience and/or training; or equivalent combination of education and experience. Must be able to use equipment to help lift miscellaneous steel parts, assemblies that may weight up to several thousand pounds.
Wheelchair Assembly Technician United Seating & MobilityWheelchair Assembly TechnicianAlbuquerque, NMMaintaining our standing as the industry leader in CRT comes from having a workforce with a diverse mix of minds, backgrounds and experiences, and we are committed to cultivating an inclusive work environment based on open dialogue, active listening and ongoing definitive actions. From manual and powered wheelchairs to disposable medical supplies that serve unique medical and functional needs, we are improving the lives of people with disabilities by enabling them to actively participate in everyday life.
System Assembly Technician (Albuquerque, NM - Full-Time) Ideal Vacuum Products, LLCSystem Assembly Technician (Albuquerque, NM - Full-Time)Albuquerque, NMA qualified candidate has good mechanical skills required for many assembly tasks using mechanic tools; wrenches, screw drivers, Allen wrenches, presses, ceiling hoists, wire strippers, electrical crimp tools etc. Positive attitude and strong work ethic will be valued very highly and open up future opportunities as a machine shop employee within Ideal Vacuum.
Cactus Wellhead - Assembly Technician I- Day Cactus Wellhead LLCCactus Wellhead - Assembly Technician I- DayHobbs, NMWhile performing the duties of this job, the employee: Physical Requirements: • Must be able to lift/move up to 50 pounds regularly • Stand and walk for extended periods (up to 12 hours per shift) • Climb stairs and ladders • Bend, stoop, kneel, and reach • Work in confined spaces when required • Operate heavy equipment and power tools • Perform repetitive movements. Environmental Conditions: • Exposure to extreme weather conditions • Exposure to loud noise levels requiring hearing protection • Work in high places and confined spaces • Exposure to dust, fumes, and chemicals • Work around moving mechanical parts • Work in hot and cold temperatures.
Electrical Technician (Harness Assembly) Lee Hecht HarrisonElectrical Technician (Harness Assembly)Moriarty, NM$80,000–$90,000 / yearThese high altitude systems are designed to deliver telecommunications connectivity, emergency response capabilities, environmental monitoring, and defense applications faster and more efficiently than traditional infrastructure. The ideal candidate enjoys working with their hands, takes pride in clean and accurate builds, and is comfortable supporting testing and troubleshooting in a fast paced R and D environment.
NewManufacturing • Production • Assembly • Packer • Warehouse • Quality • Maintenance • Security | AST SpaceMobile Hiring 500+ Employees – El Paso Career Fair June 22–26 | Start Your New Career in Midland AST SpaceMobileManufacturing • Production • Assembly • Packer • Warehouse • Quality • Maintenance • Security | AST SpaceMobile Hiring 500+ Employees – El Paso Career Fair June 22–26 | Start Your New Career in MidlandLas Cruces, NM$20–$55 / hourAST SpaceMobile is building the future of global communications through next-generation satellite technology, and we are looking for hardworking, motivated individuals ready to begin a career in spacecraft manufacturing. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected.
Final Mile Delivery & Assembly Independent Contractor American Direct CourierFinal Mile Delivery & Assembly Independent ContractorAlbuquerque, New MexicoSince 2006, our company has been helping customers enjoy their products by crossing the threshold and offering a total solution for delivery and installation. American Direct Logistics is Looking for Owner/Operators with Box Trucks/ Sprinter Vans and Commercial Auto Insurance.
2nd Shift Environmental Test Technician II (M–Th 6:00pm - 4:00am) (El Paso Midland) AST SpaceMobile2nd Shift Environmental Test Technician II (M–Th 6:00pm - 4:00am) (El Paso Midland)Las Cruces, NMIf you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home. We are searching for an Environmental Test Technician II supports execution of environmental testing activities including thermal vacuum, vibration, shock, and acoustic testing.
4th Shift Environmental Test Technician II Fri - Sun, 6PM to 6AM (El Paso Midland) AST SpaceMobile4th Shift Environmental Test Technician II Fri - Sun, 6PM to 6AM (El Paso Midland)Las Cruces, NMIf you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home. We are searching for an Environmental Test Technician II supports execution of environmental testing activities including thermal vacuum, vibration, shock, and acoustic testing.
3rd Shift Environmental Test Technician II (Fri - Sun, 6AM to 6PM) (El Paso Midland) AST SpaceMobile3rd Shift Environmental Test Technician II (Fri - Sun, 6AM to 6PM) (El Paso Midland)Las Cruces, NMIf you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home. We are searching for an Environmental Test Technician II supports execution of environmental testing activities including thermal vacuum, vibration, shock, and acoustic testing.
Space Hardware Production Technician (Development and Fabrication Tec 3/4) Los Alamos National LaboratorySpace Hardware Production Technician (Development and Fabrication Tec 3/4)Los Alamos, NM$66,100–$103,600 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. This position will support the Electromagnetic Pulse Sensor (EMP) project team in the Space-based Nuclear Detonation Detection (SNDD) program by developing, designing, and fabricating parts, fixtures, and assemblies used in hardware critical to national security.
Assembler / Electronic Technician II Senspex, Inc.Assembler / Electronic Technician IIRio Rancho, NMThis position constructs, maintains, and tests electrical systems and components, uses measuring and diagnostic tools to test and modify electronic parts, and ensures systems and components meet established specifications. Associate Degree in Engineering, Electronics Technology or other related technical field; or equivalent certifications plus three years of relevant experience; or an equivalent combination of relevant education and experience.
Production/Engineering Technician Senspex, Inc.Production/Engineering TechnicianRio Rancho, NMThis position constructs, maintains, and tests electrical systems and components, uses measuring and diagnostic tools to test and modify electronic parts, and ensures systems and components meet established specifications. Experience in any of the following: infrared and electro optical sensors, image processing, sensor fusion, sensor design and analysis, sensor testing and data analysis, and integration on platforms.
Material Science and Engineering Research Technician (Research Tec 2/3) Los Alamos National LaboratoryMaterial Science and Engineering Research Technician (Research Tec 2/3)Los Alamos, NM$54,900–$84,300 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. In addition to the requirements listed above, the Research Technician 3 will also require the following: Knowledge or experience related to metallography, electron microscopy, materials characterization, materials processing and properties measurements, mechanical and dynamic testing, and/or maintenance of scientific equipment.
Research Technician 4/5 Los Alamos National LaboratoryResearch Technician 4/5Los Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Safely handle radioactive materials and chemicals in glove boxes; perform glove box bag outs and glove changes in a respirator; follow Detailed Operating Procedures and follow formality of operations for conducting work in a Nuclear Facility; protect nuclear materials and classified information in a secure environment; perform transactions on the LANMAS computer system and conduct activities in accordance with environmental regulations.
Mechanisms Technician (Dayshift Mon-Thurs 7:30am-5:30pm) (El Paso, TX Midland, TX) AST SpaceMobileMechanisms Technician (Dayshift Mon-Thurs 7:30am-5:30pm) (El Paso, TX Midland, TX)Las Cruces, NMThis role focuses on building and validating precision mechanisms used in large phased-array satellite structures, including hinges, release mechanisms, actuators, and deployment systems. If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home.
Manufacturing Technician for Pit Technologies (Research Tec 1) Los Alamos National LaboratoryManufacturing Technician for Pit Technologies (Research Tec 1)Los Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. You will be trained to perform several tasks that could include manufacturing operations in the areas of plutonium processing, metal processing, casting, vacuum equipment operations, welding, mechanical assembly, leak testing, equipment troubleshooting, and equipment maintenance.
Manufacturing Technician (Research Tec 2/3) Los Alamos National LaboratoryManufacturing Technician (Research Tec 2/3)Los Alamos, NM$54,900–$84,300 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Technical Competency: Working knowledge in technical areas, such as chemical synthesis; chemical, radiological materials handling; analytical procedures and methodology; materials characterization or testing; optical and laser systems; data acquisition systems; pressure systems; fiber optics; electronic imaging; solid-state electronic design and assembly; mechanical systems.
NewRadiation Protection Instrument Repair and Calibration Technician (Process & Sampling Tec 2/3) Los Alamos National LaboratoryRadiation Protection Instrument Repair and Calibration Technician (Process & Sampling Tec 2/3)Los Alamos, NM$54,900–$84,300 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission functions and operations of national security laboratories and nuclear weapons productions facilities, which includes Los Alamos National Laboratory. Work Environment: Work near sources of non-ionizing and ionizing radiation, Work near electrical power supplies, Wear headgear or head protection, safety glasses, hearing protection, gloves or hand protection, safety glasses, safety shoes or protective footgear, face shield or facial protection.
Mechanical/Electrical Technician X-Bow SystemsMechanical/Electrical TechnicianSocorro, NMYou'll know you're successful in this role when you've identified blockers, guided processes to address anomalies and performance shortfalls, met schedule goals regarding installation, commissioning and deployment of components, sub-assemblies, and top-level facilities. About the Role: As a Mech/Elec Technician you will install, operate, test and maintain manufacturing equipment, including automated and robotic parts, integral to our solid rocket motor propellant production facilities.
Machinist (Research Technician 3/4) Los Alamos National LaboratoryMachinist (Research Technician 3/4)Los Alamos, NM$66,100–$103,600 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Uses and interprets engineering blueprints, sketches, specifications, and related data to assist in the development of design factors, conducting operational test and fault isolation on systems and equipment, recommending modifications, troubleshooting malfunctions, documenting findings and reporting results.
Electro-Mechanical Technician LeidosElectro-Mechanical TechnicianAlbuquerque, New MexicoJune 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
Body Shop Technician - PART TIME AlbuquerqueBody Shop Technician - PART TIMEAlbuquerque, New MexicoCorrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering and frame components . The Body Shop Technician is able to repair vehicle bodies and straighten vehicle frames both steel and aluminum repair as well as fiber glass repairs; correcting vehicle deficiencies; making adjustments and alignments in the Body Shop Department of a retail dealership environment.
Facilities Mechanical Technician Kairos PowerFacilities Mechanical TechnicianAlbuquerque, NMThe ideal candidate will have hands-on experience performing/coordinating maintenance on boilers, chillers, and HVAC systems and experience working with R&D test equipment, manufacturing equipment, and other commercial building systems including Building Management Systems (BMS), fire protection, fire alarms, access control, security cameras, and security alarms. The Facilities Maintenance Technician will support a variety of facilities maintenance tasks across the site including performing inspections, installations, repairs, replacements, and other general tasks on existing facility infrastructure.
Radiochemical Laboratory Technician- Research Tec 3/4 Los Alamos National LaboratoryRadiochemical Laboratory Technician- Research Tec 3/4Los Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. The Actinide Analytical Chemistry (C-AAC) Group within Chemistry Division is looking for a Research Technician at either a level 3 or level 4. This position serves one of the Laboratory's core national security missions' areas: Weapons Science.
NewNuclear and Hazardous Materials Technician (Tec) 1/2 Night Shift Los Alamos National LaboratoryNuclear and Hazardous Materials Technician (Tec) 1/2 Night ShiftLos Alamos, NM$49,600–$76,700 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Specific duties may include, but are not necessarily limited to: technical assistance in fabrication, assembly, inspection, testing, analytical instrumentation, handling drums and/or other containers of hazardous materials or hazardous wastes, operating forklifts and/or other mechanical loading/handling equipment, and performing nuclear material move transactions.
NewNuclear and Hazardous Materials Technician 1/2 Los Alamos National LaboratoryNuclear and Hazardous Materials Technician 1/2Los Alamos, NM$49,600–$76,700 / weekDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Specific duties may include but are not necessarily limited to technical assistance in fabrication, assembly, inspection, testing, analytical instrumentation, handling drums and/or other containers of hazardous materials or hazardous wastes, operating forklifts and/or other mechanical loading/handling equipment, and performing nuclear material move transactions.
Field Service technician L3Harris Technologies IncField Service technicianKirtland, NM4 years' experience troubleshooting and repairing problems related to product aircraft integration, electronics and mechanical systems, down to the line replaceable unit level and work with Quality & Manufacturing Engineering to take corrective actions. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs.
H6700 Slot Technician Tc Inn of the Mountain GodsH6700 Slot Technician TcMescalero, New MexicoWhile performing the duties of this position, the team member is frequently required to stand, walk, use hands, to finger, handle or feel, reach with hands and arms, stoop, kneel, crouch, or crawl, talk or hear. Electrical/mechanical experience relating to diagnosing, troubleshooting component failures on comparative equipment; or two years related experience and/or training; or equivalent combination of education and experience may be substituted.
Diesel Mechanic/Technician - Experienced Penske CorporationDiesel Mechanic/Technician - ExperiencedHobbs, NMWillingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening. Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
Master Technician Rocket Lab CorpMaster TechnicianAlbuquerque, NMImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more.
Electrical Technician (Nuclear & Hazardous Materials Tec 3/4) Los Alamos National LaboratoryElectrical Technician (Nuclear & Hazardous Materials Tec 3/4)Los Alamos, NM$66,100–$103,600 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Work Environment: Working overtime or irregular schedule, working off-shift/rotating schedule, work near sources of ionizing radiation, working near machinery and moving parts, domestic/foreign travel, mask or respirator, safety glasses and eye protection, gloves or hand protection, hearing protection, safety shoes or protective footgear.
Engineered Systems Technician 1/2 Los Alamos National LaboratoryEngineered Systems Technician 1/2Los Alamos, NM$49,600–$76,700 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Experience with two or more of the following: 1) installation and testing of high-power RF devices and/or systems; 2) installation and testing of high-voltage and pulsed-power devices and/or systems; 3) installation and testing of RF power amplifiers, DC and pulsed-power systems; or 4) installation and testing of RF transport systems such as cables, coaxial lines or waveguides.
Electro-Mechanical Technician Superior Industries IncElectro-Mechanical TechnicianBelen, NMTechnical Training & Leadership: Serve as the primary subject matter expert on the production floor, providing technical guidance and hands-on electrical training to assembly personnel. Prototype Testing & Engineering Support: Collaborate directly with the engineering department to troubleshoot and optimize prototype or "first-run" systems, providing immediate technical solutions to integration challenges.
Master Technician Rocket Lab CorporationMaster TechnicianAlbuquerque, NMTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more.
NewPulsed Power Technician (Junior to Senior Level) I Pulse GroupPulsed Power Technician (Junior to Senior Level)Albuquerque, NMOur technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. We are seeking innovative technicians with expertise in commercial pulsed power, power electronics, control systems, or high-temperature applications.
NewTelecommunications Technician 2 - Las Cruces, NM M.C. Dean, IncTelecommunications Technician 2 - Las Cruces, NMLas Cruces , New MexicoAs part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Ability to lead the installation of cable from Telecommunications Rooms (TR) to work area outlets (WAO) while following directions & ensuring cables are installed methodically & arranged in proper bundles at TR for ease of dressing & termination.
Facilities Mechanical Technician Kairos Power LLCFacilities Mechanical TechnicianAlbuquerque, NMscaffolding, ladders)Moving self in different positions to accomplish tasks in various environments including tight and confined spacesRemaining in a stationary position, often standing, or sitting for prolonged periodsMoving about to accomplish tasks or moving from one worksite to anotherAdjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directionsCommunicating with others to exchange informationOperating motor vehicles, heavy equipment or machineryUse hand toolsRepetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teamsEnvironmental ConditionsGeneral office environmentLow temperaturesHigh temperaturesOutdoor environment or elements such as precipitation and windNoisy environmentsSmall and/or enclosed spacesOdors or fumes from chemicals or chemical reactionsElevated heightsAssessing the accuracy, neatness and thoroughness of the work assignedHigh-concentration, demanding and fast-pacedExposure to moving mechanical parts and energized or pressurized systems during inspection, maintenance, and testing activities. Ability to test, troubleshoot, and repair malfunctioning systems, apparatus, or components by using basic electrical test equipment (voltmeters, ohmmeters)Carry out skilled maintenance tasks encompassing inspections, operations, installation, and troubleshooting of building equipment such as bridge cranes and dock equipmentManage small facilities projects, work orders, and preventive maintenance tasks using computerized management maintenance systems (CMMS) and app-based systemsDocument and communicate results of preventive maintenance tasks including visual inspections, defect detection, hazard identification, and code complianceAnalyze, prepare, and deliver reports; fill out preventative maintenance requests, deficiency reports, and work orders using a computer and other equipment.
Mobile Service Technician AlbuquerqueMobile Service TechnicianAlbuquerque, New MexicoCorrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts.
Service Technician AlbuquerqueService TechnicianAlbuquerque, New MexicoCorrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. · Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs,differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts.
NewTechnician IDEXTechnicianAlbuquerque, NMRegular use of a computer, keyboard, and digital tools + Frequent sitting, bending, reaching, and fine‑motor work while using microscopes and inspection equipment + Ability to manipulate and position fragile optical components and assemblies + Ability to grasp, turn, adjust, and handle small instruments and tools + Repetitive wrist and forearm movements during inspection and microscope operation + Ability to bend at the neck for extended periods during inspection tasks + Operation of testing and measuring equipment requiring applied force to adjust knobs, cranks, and calibration mechanisms + Exposure to minimal fumes from alcohol and acetone used in cleaning + Ability to lift up to 50 lbs occasionally, 20 lbs frequently, and 10 lbs continuously (Medium Work) + Ability to gown up and work in cleanroom environments as required + Strict adherence to safety procedures and PPE requirements . + Ability to perform repetitive tasks requiring consistent mental and visual focus + Strong hand–eye coordination for handling delicate components + Proficiency with basic computer applications including Word, Excel, and email + Strong work ethic and desire to learn new skills + Effective communication skills and ability to work within a team environment .
Rocket Lab - Production Operator & Equipment Maintenance/Facilities Technician Hiring Event Rocket Lab CorpRocket Lab - Production Operator & Equipment Maintenance/Facilities Technician Hiring EventAlbuquerque, NMImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Electro-Mechanical Technician Leidos Holdings IncElectro-Mechanical TechnicianAlbuquerque, NM$48,100–$86,950 / yearSolutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Experienced Shop Technician Boss Truck Shops, IncExperienced Shop TechnicianJamestown, New MexicoPerforms electrical system diagnostics and repairs, including voltage drop testing, parasitic draw testing, starters, alternators, and engine-related sensors. Performs advanced steering and suspension repairs, including gear boxes, kingpins, springs, shackles, hangers, tie rods, torsion arms, and fifth wheels.