Field Service Technician II TASField Service Technician IIHouston, TexasTAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, andcommercial/industrial utility system applications. The position requires close interface with the Quality Department, Project Engineers and Project Managers, Process Engineer, client personnel, and with other Field Engineers and Field Service Technicians.
Filed Service Technician III TASFiled Service Technician IIIHouston, TexasHowever, this position requires close interface with the Service Project Manager, Product Manager, Production Manager, QA manager, and the Engineering manager, client personnel, general contractors, sub-contractors, and/or consulting engineers. TAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, and commercial/industrial utility system applications.
Quality Technician (RMA) Murray ResourcesQuality Technician (RMA)Houston, TXThe RMA Quality Technician is responsible for evaluating returned products, identifying potential quality issues, documenting findings, and supporting the Returned Material Authorization (RMA) process from evaluation through resolution. Requirements: Technical degree, certification, trade school training, or equivalent experience in Electronics, Electrical Technology, Instrumentation, Mechatronics, or a related technical field preferred.
Test Engineering Technician Foxconn Industrial InternetTest Engineering TechnicianHouston, TXFull timeReport ORT (on-going reliability tests) and RDT (reliability demonstration tests) and escalate issues to Test Engineers. Assist Test Engineers with NPI (new product introduction) test station setup and other processes including modeling, pre-pilot, and pilot runs.
Test Engineering Technician- Nights (6p.m. to 3 a.m.) Foxconn Industrial InternetTest Engineering Technician- Nights (6p.m. to 3 a.m.)Houston, TXFull timeReport ORT (on-going reliability tests) and RDT (reliability demonstration tests) and escalate issues to Test Engineers. Assist Test Engineers with NPI (new product introduction) test station setup and other processes including modeling, pre-pilot, and pilot runs.
Manufacturing Technician Apidel TechnologiesManufacturing TechnicianKaty, TXContractorEnsure ability to: read blueprints; identify components; perform wire preparation, stripping and crimping; perform harness repair and termination; use pertinent manual hand tools. Maintain skills in electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Technology Quality Technician HirePower Personnel Inc.Technology Quality TechnicianSugar Land, TX$21–$24 / hourMeasure product dimensions using precision inspection equipment, including calipers, micrometers, gauges, and CMM equipment, and accurately document results in the quality database. Operating in over 100 countries, they focus on digital innovation and sustainable practices to drive the future of energy and support the transition to lower-carbon operations.
Production Technician Uson L.P.Production TechnicianHouston, TXWork Environment: Essential duties of this classification are primarily performed in a climate-controlled manufacturing environment that may include frequent interruptions and a high level of contact with staff, other members of management, customers, and off-site employees/locations. Uson, a business unit of PAC, is the premiere global provider of leak testing equipment and solutions for the medical device, automotive, electric vehicle, industrial and packaging industries.
Maintenance Technician - Stationary Engineer License Required Daniels HealthMaintenance Technician - Stationary Engineer License RequiredHouston, TX$38.89–$39.85 / hourThe Maintenance Technician is responsible for servicing and maintaining our electro-mechanical equipment, including Daniels' robotic washline, autoclaves, boilers, and various other equipment to support site operations both locally and regionally. Ability to use computers, tablets and smart devices proficiently; navigate Excel spreadsheets and computer-based reporting such as Maintain-X and Myosh; write reports in MS Word and maintain computer-based documentation.
NewWiring Technician Lead - 1St Shift PanelmaticWiring Technician Lead - 1St ShiftHouston, TXThis role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. The Lead Wiring Technician will work closely with Production Supervisors, Engineering, and other team members to ensure projects are completed correctly and efficiently.
NewWiring Technician Lead - 2Nd Shift PanelmaticWiring Technician Lead - 2Nd ShiftHouston, TXThis role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. The Lead Wiring Technician will work closely with Production Supervisors, Engineering, and other team members to ensure projects are completed correctly and efficiently.
Electrical Technician GAS Global ServicesElectrical TechnicianHouston, TX$30–$35 / hourInspects, tests, and adjusts complex electronic assemblies, subassemblies, parts, and systems for compliance with specifications following blueprints, schematic drawings, and inspection manuals, using hand tools and precision testing equipment. Knowledge of PLC programs and operator interface units, induction equipment, SCR (Silicon Controlled Rectifier) systems, Inverter/rectifier systems, and variable frequency drives .
Warehouse Technician (53159) Tally Energy ServicesWarehouse Technician (53159)Houston, TXThe background check may consist of prior employment verification, professional reference checks, education confirmation, criminal background, motor vehicle record checks, drug and alcohol testing, and/or credit checks, as permitted by law. Load and unload materials to and from the designated storage area, such as racks, shelves, or vehicles using motorized lift vehicles.
Mechanical Technician Apidel TechnologiesMechanical TechnicianSugar Land, TXContractorEnsure ability to: read blueprints; identify components; perform wire preparation, stripping and crimping; perform harness repair and termination; use pertinent manual hand tools. Maintain skills in electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Electrical Technician BrayElectrical TechnicianHouston, TexasThis position is responsible for assembling prototypes, wiring and troubleshooting electrical systems, conducting laboratory testing, collecting and documenting test data, supporting certification activities, and assisting engineers with product development projects. • Operate laboratory equipment including oscilloscopes, multimeters, power analyzers, power supplies, electronic loads, data acquisition systems, network analyzers, and protocol monitoring tools.
Lab Technician II - Managed Pressure Drilling Flow Loop Weatherford International PlcLab Technician II - Managed Pressure Drilling Flow LoopHouston, TXThe Flow Loop Mechanical Lab Technician (MPD) supports engineering and product line teams by conducting development testing by operating specialized flow loop systems, high pressure/high temperature (HPHT) systems, and other test systems that simulate operating conditions for various oil field tools. This role focuses on evaluating managed pressure drilling (MPD) equipment performance, testing fluid behavior under dynamically controlled pressure conditions representative of real drilling operations and maintenance test facility.
Electro-Mechanical Technician / Drilling Services Weatherford International PlcElectro-Mechanical Technician / Drilling ServicesHouston, TXAcross our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets.
NewTesting Technician, Switchgear Panelmatic Inc.Testing Technician, SwitchgearHouston, TXWe have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. Identify, document, and troubleshoot electrical and mechanical issues, working closely with engineering and production teams to resolve discrepancies.
Valve Technician - Control and Isolation Valves Puffer-Sweiven CareersValve Technician - Control and Isolation ValvesHouston, TexasAbility to safely use and maintain a large variety of tools and equipment, associated with the assembly of valves and actuators, including impact wrenches, electric and manual hand tools, lapping machines, testing equipment, overhead cranes and forklifts. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions — with the goal of exceeding customer expectations.
NewARMO Technician Baker HughesARMO TechnicianHouston, TexasYou will work closely with production and engineering teams to perform assembly, functional testing, troubleshooting, and quality verification activities while maintaining a strong commitment to safety, operational excellence, and customer requirements. Baker Hughes stands as a leading global energy technology company, delivering innovative solutions that make energy safer, cleaner, and more efficient across the entire value chain.
Instrumentation Tubing Technician iWorkforce Solutions LPInstrumentation Tubing TechnicianHouston, TXContractorRequired Skills & ExperienceTo be considered, candidates must clearly display the following experience on their resumes:Instrumentation & Tubing: Proven experience fitting, cutting, and bending Swagelok stainless steel tubing ranging from $1/4$-inch to 1-inch without errors. Operate facility equipment as needed (e.g., manlifts, scissor lifts, overhead cranes, band saws, hose cutting/crimping devices, pressure pumps).Inspect, maintain, and care for assigned tools.
NewWiring Technician Lead - 1St Shift Panelmatic Inc.Wiring Technician Lead - 1St ShiftHouston, TXThis role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Wiring Technician Lead to provide hands-on leadership and technical support within our wiring department.
NewWiring Technician Lead - 2Nd Shift Panelmatic Inc.Wiring Technician Lead - 2Nd ShiftHouston, TXThis role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Wiring Technician Lead to provide hands-on leadership and technical support within our wiring department.
Electromechanical Technician Actalent IncElectromechanical TechnicianHouston, TX$30–$35 / hourNew hires initially rotate through several teams to gain broad exposure before being assigned to a primary group, supporting a strong pipeline for early-career professionals and providing clear opportunities for growth and eventual direct hire with the customer. Competence in identifying defects such as solder joint issues, component orientation and polarity errors, foreign object debris (FOD), cosmetic defects, connector quality issues, and wiring or cable routing problems.
I & E Technician Ineos AGI & E TechnicianAlvin, TXSafety minded, demonstrated strong safety and environmental performance, Strong verbal as well as written communication skills (upward, lateral, and downward), Strong ability to work with others, team builder, Strong bias for action to identify potential problems and co-ordinate their resolution before they become an issue, Ability to manage work priorities to deliver performance improvements and reliability in a demanding work environment, Good analytical and organizational skills, Stress resistant and methodical, Problem solver and change agent, Self-motivated, self-starter; able to work with minimal supervision. The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes.
Production Technician Atlas Copco ABProduction TechnicianHouston, TXYou can make a meaningful impact by contributing with your insights and taking ownership of your work, supported by flexible ways of working and leaders who empower you. Troubleshoot mechanical issues during assembly and testing, collaborating with management or engineering teams as needed.
Field Service Technician II Comfort SystemsField Service Technician IIHouston, TexasTAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, and commercial/industrial utility system applications. The position requires close interface with the Quality Department, Project Engineers and Project Managers, Process Engineer, client personnel, and with other Field Engineers and Field Service Technicians.
NewFiled Service Technician II Comfort SystemsFiled Service Technician IIHouston, TexasTAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, andcommercial/industrial utility system applications. The position requires close interface with the Quality Department, Project Engineers and Project Managers, Process Engineer, client personnel, and with other Field Engineers and Field Service Technicians.
Field Service Technician III Comfort SystemsField Service Technician IIIHouston, TexasHowever, this position requires close interface with the Service Project Manager, Product Manager, Production Manager, QA manager, and the Engineering manager, client personnel, general contractors, sub-contractors, and/or consulting engineers. TAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, and commercial/industrial utility system applications.
NewFiled Service Technician III Comfort SystemsFiled Service Technician IIIHouston, TexasHowever, this position requires close interface with the Service Project Manager, Product Manager, Production Manager, QA manager, and the Engineering manager, client personnel, general contractors, sub-contractors, and/or consulting engineers. TAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, and commercial/industrial utility system applications.
Field Service Technician Astec Industries IncField Service TechnicianStafford, TXMust actively work with customers and ELGIN Engineers and Quality Assurance Specialists toidentify possible equipment enhancements and/or new product innovations based on feedbackreceived from customers and observations made relative to the field deployment of ELGINequipment 4. Make service calls whenever required, to customer or rig locations to check the operationalefficiency of our equipment at these locations. When service work is not available, the FSSshall coordinate with the Field Services Supervisor to support equipment manufacturing and/ortesting, or will make rig/ customer calls to check the status of ELGIN equipment and work withcustomer personnel to enhance customer relationships.
Manufacturing Technician LancesoftManufacturing TechnicianRosharon, TX$1Install mechanical tooling and utilize HMIs to run production bays and package charges in a semi-automated manufacturing facility. - Clearance is required due to the handling of explosive materials and is processed through the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) after onboarding.
Service Technician AWC IncService TechnicianDeer Park, TXThe Service Technician at AWC plays a pivotal role in ensuring the optimal functioning of pressure relief and safety relief valves, critical components in various industrial settings. Ability to work in a shop atmosphere and outside in customer-owned facilities, i.e. Refineries, Chemical and Petrochemical Plants, Power Plants and Pipeline and Compressor Station facilities.
Sr. Electronic Technician Quaise EnergySr. Electronic TechnicianHouston, TexasAs both a technology innovator and project developer, Quaise builds and operates solutions that harness superhot geothermal energy far below the surface, enabling power generation that can rival the output of today’s most efficient fossil fuel and nuclear plants. Leveraging millimeter wave drilling, developed after more than a decade of research at MIT, Quaise’s mission is to make superhot geothermal a backbone of the modern energy system, offering affordable, zero-carbon power and true energy independence for communities and nations everywhere.
NewElectronic Technician Trainee TekWissen LLCElectronic Technician TraineeKaty, TX$20–$23.50Job Title: Electronic Technician Trainee Duration: 5 Months Work Location: Katy, TX 77493 Job Type: Temporary Assignment Work Type: Onsite Shift: 1st Shift: 7:00 AM 5:00 PM Job Description: The Electronic Technician Trainee is responsible for ensuring on-time delivery of equipment as per operational demands. Adhere ttransactional discipline within Technology Lifecycle Management (TLM) business systems trecord materials and supplies, labor costs and equipment maintenance performance history such as movements, work orders, parts used and time tmaintain.
Subsea Technician Trendsetter EngineeringSubsea TechnicianHouston, TexasComprehensive practical knowledge of hydraulic systems to 15,000 psi operating pressure including: pressure testing and recording, hydraulic flushing and cleanliness testing, instrument tube and pipe fitting, systems operation, troubleshooting, fault finding and repair to component level (including pumps accumulators, regulators, relief valves, directional control valves, pressure switches and transmitters), and testing etc. Sound mechanical knowledge including threads and thread forms, limits and fits, measuring units and conversions, basic math and mechanics, and properties of materials.
Metrology Field Service Technician Enerpac Tool Group CorpMetrology Field Service TechnicianDeer Park, TXEnerpac Tool Group's businesses are global leaders in high pressure hydraulic tools, controlled force products, and solutions for precise positioning of heavy loads that help customers safely and reliably tackle some of the most challenging jobs around the world. This role requires expertise in dimensional metrology, laser tracking, and other high-precision measurement technologies, often in rugged, high-risk environments such as power plants, refineries, shipyards, steel mills, and manufacturing facilities.
AUTO BODY TECHNICIAN Frazer, Ltd.AUTO BODY TECHNICIANHouston, TX$18–$32 / hourRequired Education and Experience: Experience appropriate to your level: Level I - willingness to learn with basic mechanical aptitude; Level II - 1-3 years of door/body prep, paint, and install; Level III - 3-5 years including full auto-body door build and complex fitment; Level IV - 5+ years with mastery and the ability to train others. Frazer, a leading builder of emergency medical vehicles and mobile healthcare units, is seeking a Commercial Vehicle Remove & Install Technician to join our Paint - Doors team.
Automation & Maintenance Technician KULR Technology Group IncAutomation & Maintenance TechnicianWebster, TX$35–$41 / hourPosition Overview: The Automation & Maintenance Technician is a critical dual-role position on KULR's manufacturing team, responsible for two equally important functions: (1) the programming, commissioning, troubleshooting, and maintenance of PLC and automation systems across battery pack production and test operations, and (2) the setup, commissioning, and ongoing preventive maintenance of all production equipment at the Webster facility. This role requires a hands-on technical expert who can bridge automation controls, mechanical systems, and equipment reliability - ensuring maximum uptime, precision, and throughput across all of KULR's production lines.
Repair Calibration Technician II Westinghouse Air Brake Technologies CorpRepair Calibration Technician IIWebster, TX$26–$28 / hourWith roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike. Follow detailed repair, calibration, and administration procedures for Evident products with excellent attention to detail and ability to multi-task numerous customer repairs through to completion.
Field Service Technician ABBField Service TechnicianHouston, TexasRemoteUnder the direction of the Drives Service Manager, a Field Service Technician provides technical onsite and offsite support and expertise in response to a variety of site work requests. Associate degree in technical field and 3 years of relevant experience or High school diploma/GED and 5 years of relevant experience or military education/experience required.
NewManufacturing Technician NR Consulting LLCManufacturing TechnicianSugar Land, TX$19–$20 / hourEnsure ability to: read blueprints; identify components; perform wire preparation, stripping and crimping; perform harness repair and termination; use pertinent manual hand tools. * Use the guiding principles and tools of the Manufacturing System to drive continuous improvement Minimum Years of experience: 2yrs experience or Associate's Degree in Electronics.
Space Systems Technician I Atec, Inc.Space Systems Technician IStafford, TXThis position requires someone with a dynamic mindset who can navigate between fine details and the big picture with a breadth of assembly, engineering drawing, work instruction, and test knowledge. Crimp, stake, screw, bolt, rivet, solder, press fit, or perform similar operations to join or secure parts in place.
Technology Quality Technician Apidel TechnologiesTechnology Quality TechnicianSugar Land, TXContractorMeasure product dimensions using precision instruments (such as calipers, micrometers, gauges, CMM equipment) and accurately record results in the quality database. The Technology Quality Technician is responsible for conducting quality control activities, including inspections, tests and results reporting.
Quality Technician (QA/QC + AOI Programming) MacroFabQuality Technician (QA/QC + AOI Programming)Houston, TXOur technology and services allow customers to rapidly bring new products to market and consume manufacturing as a virtualized resource by offering instant price quotes, rapid prototyping services, and production at scale through a network of factories in North America. This position is responsible for performing quality assurance and quality control inspections while developing, optimizing, and maintaining Automated Optical Inspection (AOI) programs to maximize defect detection and improve manufacturing efficiency.
NewProcess Engineering Technician MacroFabProcess Engineering TechnicianHouston, TXFull timeOur technology and services allow customers to rapidly bring new products to market and consume manufacturing as a virtualized resource by offering instant price quotes, rapid prototyping services, and production at scale through a network of factories in North America. This role assists with process validation, equipment support, troubleshooting, documentation, and continuous improvement initiatives across SMT, through-hole assembly, final assembly, and other manufacturing operations.
I & E Technician INEOS PhenolI & E TechnicianAlvin, TXSafety minded, demonstrated strong safety and environmental performance, Strong verbal as well as written communication skills (upward, lateral, and downward), Strong ability to work with others, team builder, Strong bias for action to identify potential problems and co-ordinate their resolution before they become an issue, Ability to manage work priorities to deliver performance improvements and reliability in a demanding work environment, Good analytical and organizational skills, Stress resistant and methodical, Problem solver and change agent, Self-motivated, self-starter; able to work with minimal supervision. The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes.
I & E Technician Ineos Oligomers UsaI & E TechnicianAlvin, TexasSafety minded, demonstrated strong safety and environmental performance, Strong verbal as well as written communication skills (upward, lateral, and downward), Strong ability to work with others, team builder, Strong bias for action to identify potential problems and co-ordinate their resolution before they become an issue, Ability to manage work priorities to deliver performance improvements and reliability in a demanding work environment, Good analytical and organizational skills, Stress resistant and methodical, Problem solver and change agent, Self-motivated, self-starter; able to work with minimal supervision. The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes.
Generator Technician VoltaGrid LLCGenerator TechnicianHouston, TXEssential Duties and Responsibilities: Advanced knowledge to assist and participate in routine inspections and modify Natural Gas Generators and associated equipment. This person will verify and adjust breaker settings per job requirements while proactively inspecting and recommending repairs to increase generator reliability.
NewBiomedical Technician I University of Texas MD Anderson Cancer CenterBiomedical Technician IHouston, TXPreferred: Entry level candidates, recent graduates with little to no hands on experience, strong technical aptitude and willingness to learn, effective communication and customer service skills, ability to work independently while collaborating within a team environment. Entry-level candidates and recent graduates with strong technical aptitude, a willingness to learn, effective communication and customer service skills, and the ability to work independently while collaborating within a team environment will be well suited for this role.