FULL_TIME

FEED

UNKNOWN

Our systems are on board 90% of the world's aircraft - serving commercial aviation, defense and space operators from integrated flight deck platforms with 30-plus years in service to radiation-hardened systems trusted for human spaceflight. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space - from engines and cockpit electronics to cabin systems, mechanical components and connectivity solutions.

Honeywell Aerospace innovates and integrates thousands of products and services to advance and easily deliver safe, efficient, productive and comfortable experiences worldwide. Our History The first autopilot in 1914, Charles Lindbergh’s first successful solo flight across the Atlantic in 1927, Amelia Earhart’s landmark flight in 1932, and the world’s first sonic boom in 1947, were all made possible because of aviation technology developed by Honeywell and its legacy companies. During World War II, the groundbreaking cabin pressurization system developed by Garrett, Honeywell’s integrated C-1 autopilot, and the Norden bombsight made high-altitude bombing first feasible. Sperry instruments and navigation gear, Bendix electronics, carburetors, wheels, and brakes, and Grimes lighting systems were widely used on World War II aircraft. These innovations were later implemented successfully in civilian aircraft, helping the post-war boom in passenger travel. In the 1950’s, Honeywell Aerospace and its legacy companies changed the face of flying with the development of the first gas-turbine engines and the ring laser gyroscope, which dramatically changed guidance and navigation forever. Sperry brought computer technology to the cockpit with electronic flight instrument systems, flight management systems and other digital technology, and Bendix introduced the first commercial weather radar system.Today, Honeywell Aerospace continues to innovate in the frontier of flight safety with traffic alert and collision avoidance technologies, the AlliedSignal Enhanced Ground Proximity Warning System, and systems that help pilots avoid severe weather and hazards such as lightning and wind shear. We at Honeywell Aerospace are proud of our contributions to aviation history, but we’re just as proud of the history we’re making today. We have created the state-of-the-art integrated Aircraft Environment Surveillance System for the Airbus A380, and our advanced flight management, power distribution, pneumatic, and landing systems will help A380 operators reach new heights of performance and efficiency. We are a leading supplier of products and systems for Boeing commercial airplanes, and our integrated avionics system for the Boeing 777 sets a new technology and reliability standard. Today, we are part of the team working to define technology concepts for the next Boeing airplane, the super-efficient 777. The general, experimental, and light business aviation industries also turn to our respected Bendix/King range of communication and navigation avionics, weather radars, flight controls, flight information services, and other products and services that help make flying safer, more affordable, and more enjoyable. Honeywell Aerospace continues to work to improve the capabilities of military forces, developing systems that power unmanned vehicles, avionics for jet fighters, weapon sensors for precision targeting, and upgrades that extend the lives of proven aircraft and vehicles. We’re part of the Lockheed Martin team working on the Joint Strike Fighter program, and we’re proposing a wide range of systems for the Army’s Future Combat System. For more than 40 years, Honeywell technology has helped with the exploration and creation of opportunities in space. Our products have been integral to Neil Armstrong’s first step on the moon, and to every manned mission to space since. Today, the Space Shuttle is equipped with Honeywell’s Multifunction Electronic Display Subsystem, and we’re reaching into the future of space technology, with our work for the anticipated shuttle successor, the Orbital Space Plane, the International Space Station, and our contributions toward creating a permanent orbiting scientific laboratory and workspace. As powered flight begins its second century, Honeywell Aerospace continues to make history with leading technology, reliable products and systems, superior service, and dedicated employees. The contributions of Honeywell, its legacy companies, and five generations of employees, have advanced the science of aviation to make flying the world’s safest form of transportation, while helping to protect our nation and explore the universe. We look forward to continuing our long tradition of developing and delivering innovative aviation systems that meet the current, and anticipate the future, needs of the customer.

Honeywell - AEROSPACE

Software Engineer I

equestftpin

Honeywell Aerospace Inc.

Embedded Software Engineer II - C++, Flight Display I UI

ea_via_bold

This hands-on role partners closely with Production, Maintenance, Quality, Safety, and Supply Chain teams to implement new technologies, support automation and robotics systems, and troubleshoot equipment issues, and drive sustainable operational improvements. With nearly 5,600 team members worldwide, MiTek collaborates across the building industry to enable and accelerate transformational breakthroughs in design and construction to transform the way the industry designs, makes, and builds.

MiTek Industries Inc

Manufacturing Engineer

Honeywell Aerospace Engineering Test Services (ETS) in Tempe, AZ develops, maintains, and coordinates test equipment and solutions throughout the product lifecycle for a variety of aerospace control system product lines. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change.

Lead Test Engineer

You will solve complex multidisciplinary engineering challenges involving mechanical systems, controls, electronics, software, and system dynamics while helping deliver innovative aerospace solutions to customers around the world. With more than 10 million passengers per day flying on aircraft equipped with our products and more than 75% of commercial flights beginning with our engine start systems, Control Systems reaches farther across the aviation industry than most people realize.

Aerospace Systems Engineer II

The Controls Systems (CS) Environmental Control Systems (ECS) organization has an immediate need for a System Engineer with strong analytical and problem-solving skills to work on various Air Transport, Regional, Business and Military aircraft. Advanced degrees in Mechanical Engineering, Chemical Engineering, Systems Engineering or related technical field with emphasis on thermal management system modeling and analysis, in lieu of experience.

YEAR

Honeywell Aerospace

Systems Engineer II

Systems Engineer I

Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. Experienced with or desire to learn any or all: AutoPipe, Caesar II, AutoCAD; SmartPlant 3D, Plant 3D, Navisworks, Plant 3D, MathCAD, FEA analysis programs.

AtkinsRealis

Senior Piping Stress Engineer

As an intern, you will be provided with a structured training and development curriculum; a blend of instructor-led, virtual classrooms, eLearning courses, and on-the-job training provided by expert mentors and team members to assist you in developing your career. Gain knowledge in the following: Test Equipment Operation, Troubleshooting Techniques, Protective Relays, Power Quality Measurements, Disaster Recovery, Rotating Machinery, Protection & Control Design.

HOUR

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit <a href="http://www.eaton.com/Eaton/index.htm" target="_blank">Eaton.com.</a>

Eaton Corporation

Internship Program: Field Service Engineer

Nammo Defense Systems Inc. (NDS) develops, manufactures, and supports Shoulder Launched Munitions (SLMs), energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, and composite solutions including carbon fiber tubes and composite aerospace structures. • BS/MS in Engineering discipline or Physics with ability to perform basic engineering analyses (stress, deflection, flow rate, pressure drop, and tolerance stack-up).

Nammo Defense Systems

OTHER

Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities. High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting.

Axon

Electrical Engineer II, RF Test Engineer

greenhouse_via_bold

We have recently become aware of fraudulent recruiting activities in which individuals falsely claiming to represent LG Energy Solution Arizona, Inc. contact job seekers, advertise fictitious employment opportunities, request personal information, or seek payment in connection with an application or job offer. Candidates should be cautious of communications originating from personal email accounts or requests to communicate exclusively through platforms such as Gmail, Yahoo, Outlook/Live.com, WhatsApp, Telegram, Signal, Discord, or iMessage.

LG Energy Solution Arizona

Factory Automation Engineer, I

Basic Qualifications for Engineer Material Process 3. ABET accredited Bachelor's (Chemistry, Metallurgy or Material Science preferred) or Master's, 8 year's experience with Bachelors, 5 years with Masters. Analyzes, research, designs and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering design of and/or application in structures, systems, and subsystems.

PROLIM Global Corporation

Material Process Engineer 3 (US Citizens)

You’ll experience new cities, tackle unique projects, and earn all your own travel rewards while working directly with customers across North America. If you’re the kind of person who can laugh through flight delays, figure things out on the fly, and find satisfaction in solving complex problems, this might be your perfect fit.

ProAutomated Inc.

Field Service Engineer - Automation Industry

Experience using Control Processes and Procedures including Change Management System, Nonconformance Reports, Engineering Specifications, Takt time/rate, Corrective & Preventive Action (CAPA), and Work Instructions. The Process Engineer supports the Production Department by resolving issues related to components, equipment and processes used in the manufacture of RF coaxial cable assemblies.

Times Microwave Systems Inc.

Process Engineer

With 9 global offices in US, India, and Australia, PROLIM has won 30+ awards and proudly serving over 1200+ customers to innovate and improve their profitability and efficiency. Create and review mechanical drawings with appropriate personnel verifying completed work, checking dimensions, materials and quantities to be used.

CAD CAM Engineer 1 (Citizens) Entry level

Ability to travel between floors and buildings including frequent walking, climbing, bending, kneeling, lifting, stooping, and working/extending overhead indoors and outdoors with varying temperature ranges from 0 - 100+. Perform preventive maintenance and repairs on all mechanical, electrical, plumbing and HVAC systems including, but not limited to pumps, chillers, boilers, air compressors and air handling units.

Hines

Building Engineer

[AW]-iCims

Incorporating industry-leading preconstruction services and safety practices, the Company’s multi-disciplined team of engineering and construction professionals delivers a wide range of projects, including new facilities, infrastructure improvement and expansion, and capital construction services. Hands-on experience in the use of Autodesk-based Building Information Modeling (BIM) toolsets and work practices, including minimum of 4 years of professional level application experience with Revit, Plant3D, Navisworks, or similar process pipe modeling software.

VDC Engineer - MWH

clearcompany

This role is responsible for reviewing electrical designs, coordinating 3D models, supporting clash detection, and working closely with engineers, BIM designers, subcontractors, QA/QC teams, and field teams to support accurate and efficient project execution. Marketech International Corporation USA is seeking a detail-oriented and proactive Electrical Engineer to support electrical design review, BIM coordination, construction coordination, and project execution for water, UPW, semiconductor, high-tech, and industrial construction projects.

Marketech International Corporation USA

Electrical Engineer

GreenHouseAPI

Apply exemplary engineering investigation competencies to establish the direct cause of the failed components and proactively collaborate with the engineering team to determine root cause and corrective actions. As a Failure Analyst - Mechanical Design Engineer II here at Honeywell Aerospace, specializing in investigation aerospace components, you will play a critical role in diagnosing and understanding the cause of failures in various aerospace parts.

Area Supervisor Jobs in Alpharetta, GA

Software Engineer I Honeywell - AEROSPACE

Embedded Software Engineer II - C++, Flight Display I UI Honeywell Aerospace Inc.

Manufacturing Engineer MiTek Industries Inc

Lead Test Engineer Honeywell Aerospace Inc.

Aerospace Systems Engineer II Honeywell Aerospace Inc.

Systems Engineer II Honeywell Aerospace

Systems Engineer I Honeywell Aerospace

Senior Piping Stress Engineer AtkinsRealis

Internship Program: Field Service Engineer Eaton Corporation

Manufacturing Engineer Nammo Defense Systems

Electrical Engineer II, RF Test Engineer Axon

Factory Automation Engineer, I LG Energy Solution Arizona

Material Process Engineer 3 (US Citizens) PROLIM Global Corporation

Field Service Engineer - Automation Industry ProAutomated Inc.

Process Engineer Times Microwave Systems Inc.

CAD CAM Engineer 1 (Citizens) Entry level PROLIM Global Corporation

Building Engineer Hines

VDC Engineer - MWH MWH

Electrical Engineer Marketech International Corporation USA

Aerospace Mechanical Failure Analyst Honeywell Aerospace Inc.

Similar Job Searches

See More Jobs

Stand out to leading employers.