UNKNOWN

FEED

In this role, you will have a hands-on opportunity to design, build, and integrate state-of-the-art electrical test systems supporting complex defense products across their entire lifecycle-from high-tech engineering development labs to factory production, field operations, and long-term sustainment. Experience operating laboratory test and measurement equipment (e.g., oscilloscopes, waveform/function generators, spectrum analyzers, or network analyzers) to test hardware, interface with sensors, or measure electrical signals.

RTX Corp

Electrical Test Engineer II

linkup_via_bold

Join Raytheon's Effector Analog & Power (EAP) Team, where you will play a critical role in verifying power and analog-oriented products that support our mission to create a safer, more secure world. Requires a Bachelor's degree in Electrical Engineering and a minimum of 8 years of experience, or a Master's degree in Electrical Engineering and a minimum of 5 years of experience.

Principal Test Lead

Our semiconductor MEMS programmable solutions offer a rich feature set that enables customers to differentiate their products with higher performance, smaller size, lower power, and better reliability. Responsible for developing hardware and software automated test equipment (ATE) solutions for SiTime’s precision timing devices from NPI (New Product Introduction) through high-volume production.

YEAR

SiTime Corporation

Sr. Test Engineer

ea_via_bold

Assignments may include being guiding a team through several phases of hardware systems lifecycle such as designs and analysis; architecting new electronic systems; developing and documenting subsystem requirements and test plans; peer reviews of designs as a subject matter expert; presentations to peers, management, and government customers; and root-cause failure investigations. Experience in Digital sub-systems, systems engineering, requirement development, requirement validation, Circuit Card Assembly (CCA) Design, Digital Test Integration and/or Digital Supplier Management on an effector-based product.

Senior Principal Electrical Engineer - Digital Focus

Job responsibilities of this role vary but include activities such as troubleshooting electronics in a lab or production environment, performing system and circuit level analysis, subsystem integration and test, supporting failure investigations, maintaining and creating documentation, and interacting with multi-discipline groups including suppliers. The Advanced Effector Guidance Systems (AEGS) Department develops guidance section electronics architectures for development programs, supports subsystem analyses, integration and test, provides program leadership as well as GPS/IMU support.

AEGS Pro Electrical Engineer I (On-Site)

You will be responsible for designing test equipment (test racks, fixtures, selecting or designing digital/analog/serial and various signal interface cards, cables, etc.) to test and validate the operation of satellite components. Working closely with the spacecraft UUT Design Engineer to ensure the component test equipment (CTE)/ automated test equipment (ATE) system will validate the circuit cards and/or electronics box under all test environments.

Northrop Grumman solves the toughest problems in space, aeronautics, defense and cyberspace to meet the ever-evolving needs of our customers worldwide. Our 90,000 employees are Defining Possible every day using science, technology and engineering to create and deliver advanced systems, products and services. Northrop Grumman careers and internships are as varied as your interests, with a lifetime of potential that will allow you to work together with people from many backgrounds, personal passions and disciplines. 
 
© 2020 Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. U.S. Citizenship is required for most positions. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO

Northrop Grumman Corp

Electronic Ground Support Equipment (EGSE) Engineer - Level 3/4 (AHT)

Job responsibilities include, but are not limited to, the following: Reviews and tailors EMI/C test requirements to meet specified product and system performance for all aspects of Electromagnetic Environmental Effects (E3) compliance; Develops/designs models for interference coupling mechanisms, shielding integrity, and circuit/cable interface isolation to mitigate and control conducted/radiated emissions and susceptibility stimuli; Performs EMI/EMC testing, analyzing, mitigating and troubleshooting from components to systems level; Designs and develops unique/specialized/efficient test apparatus and testing methodology related to EMI/C and RF electrical testing; Develops work Instructions of mechanical and/or electromechanical systems, instruments and/or controls; Process/analyze EMI/C test data and prepares/generates qualification test procedures and reports. The individual should be a self-starter, versatile, problem solver, and have a willingness to work as part of a team; must be willing to travel occasionally to locations elsewhere in the corporation in order to assist in testing/troubleshooting efforts, attend design review meetings, and work off-shift hours if necessary.

EMI/C Systems Engineer - Level 3 or 4 (AHT)

Your technical expertise, engineering process knowledge, and hands-on design and debug skills will be essential to sustaining product continuity by addressing component obsolescence, facilitating design improvements, resolving critical field and production issues, and supporting regulatory testing needed to maintain global certifications or enable entry into new markets. Experience with component selection, circuit design, and verification testing in multiple areas such as power supplies, processors and microcontrollers, memory subsystems, wired interfaces, audio, RF subsystems, sensors, protection circuitry, connectors, batteries, and PCBAs/flex PCBAs.

Axon

Electrical Engineer II, Video Products, Sustaining

GreenHouseAPI

ADAPTED_NOW

HOUR

The ability to make a quick assessment of a problem, identify additional information required, understand the resources available, compare the urgency of the issue to other failures/issues, and to take the understanding of these parts and create a path for troubleshoot and/or correction and final resolution. Qualifications You Must Have: Core Technical Skills (Non-negotiables)Typically requires a Bachelor's Degree in Science in Electrical Engineering with a minimum of 5-10 years prior relevant experience.

NR Consulting LLC

Production Support Electrical Engineer-P3- 2nd Shift

NR Consulting

Qualifications You Must Have: Typically requires Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight (8) years of prior relevant experience OR an Advanced degree and five (5) years of relevant experience . Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic .

Electrical Engineer - Test

The ability to make a quick assessment of a problem, identify additional information required, understand the resources available, compare the urgency of the issue to other failures/issues, and to take the understanding of these parts and create a path for troubleshoot and/or correction and final resolution. Core Technical Skills (Non-negotiables)Typically requires a Bachelor's Degree in Science in Electrical Engineering with a minimum of 5-10 years prior relevant experience.

Production Support Electrical Engineer-P2- 2nd Shift

Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Rocket Lab's Space Systems division builds complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space including solar panels, flight software, star trackers, optical systems, separation systems, and radios.

Rocket Lab USA

Principal Electrical Engineer

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more.

Senior Electrical Engineer II

Production process knowledge of Circuit Card Assembly (CCA), RF, Seeker/Sensor, or electronic subsystems; including circuit design, CCA assembly, electrical test, and supplier/sub-tier supplier support. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.

Principal Electrical Engineer - Depot Hardware Lead

We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service. You will work across the full product lifecyclefrom requirements and design through integration, testing, deployment, and sustainmentwhile collaborating closely with cross-functional engineering teams.

Actalent Inc

Electrical Engineer

NTA, Inc. is a locally recognized Best Place to Work and Best Place for Working Parents specializing in technical services centered on research, development, integration, demonstration and evaluation of various missile and aviation system technologies with a focus in Position, Navigation, and Timing (PNT) and Guidance and Control (G&C) technologies. Key responsibilities include working as part of a small, agile engineering team to develop mission-critical U.S. Army instrumentation systems, while contributing to the design, development, and testing of electronics hardware, including custom PCBs.

NTA, Inc.

The Applicant Manager

FULL_TIME

Undergraduate degree (graduate degree in Electrical Engineering preferred but not required) in science, technology, engineering, or mathematics (STEM) field and a minimum of 10 years of prior, relevant hands-on experience in lab and/or manufacturing environments (preferably optics related, but not required). Overview: Brief Summary : Senior Electrical Systems Engineers work closely with optical, mechanical, software, and test engineers to develop, verify, and validate requirements for cutting-edge complex optical and electro-optical systems.

Edmund Optics

Senior Electrical Systems Engineer

[AW]-iCims

Working collaboratively across multidisciplinary teams, you will apply rigorous engineering processes to solve complex hardware challenges, engineer high-reliability circuit card assemblies (CCAs), and advance solutions from design through lab integration. Experience or coursework with one or more of the following: RF, Microwave, Analog, Digital Electronics, Mixed Signal, Circuit Design or Analysis, Power Electronics, VHDL, FPGA, Electrical Components, Digital Signal Processing, or PCB design.

Electrical Engineer II (Onsite)

sourcestack_via_bold

Electrical Engineer I (Onsite)

Demonstrated experience designing, integrating, and verifying electronic subsystems in several of the following areas: embedded microcontrollers, power supply design (switch-mode and linear regulators), power delivery networks, memory subsystems (FLASH/EEPROM), high- and low-speed communication interfaces (USB, UART, SPI, I2C), high-power interfaces, battery applications, battery chargers, high-power LED driver design, and RF subsystem integration. Using OrCAD Schematic tools, design embedded mixed-signal electronic circuitry that integrates high-voltage power supply circuitry, microcontrollers, flashlight/indication/display circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, data interfaces (UART, SPI, I2C, USB), RF transceivers, electromechanical transducers, and other discrete digital and analog components.

Analog Engineer Jobs in Arizona

Electrical Test Engineer II RTX Corp

Principal Test Lead RTX Corp

Sr. Test Engineer SiTime Corporation

Senior Principal Electrical Engineer - Digital Focus RTX Corp

AEGS Pro Electrical Engineer I (On-Site) RTX Corp

Electronic Ground Support Equipment (EGSE) Engineer - Level 3/4 (AHT) Northrop Grumman Corp

EMI/C Systems Engineer - Level 3 or 4 (AHT) Northrop Grumman Corp

Electrical Engineer II, Video Products, Sustaining Axon

Production Support Electrical Engineer-P3- 2nd Shift NR Consulting LLC

Electrical Engineer - Test NR Consulting LLC

Production Support Electrical Engineer-P2- 2nd Shift NR Consulting LLC

Principal Electrical Engineer Rocket Lab USA

Senior Electrical Engineer II Rocket Lab USA

Principal Electrical Engineer - Depot Hardware Lead RTX Corp

Electrical Engineer Actalent Inc

Electrical Engineer NTA, Inc.

Senior Electrical Systems Engineer Edmund Optics

Electrical Engineer II (Onsite) RTX

Electrical Engineer I (Onsite) RTX

Electrical Engineer II, Taser Axon

Similar Job Searches

Stand out to leading employers.