UNKNOWN

FEED

FLSA Status: Non-Exempt Employment Type: Full-Time Regular/Temporary: Regular Location: San Diego Airport SIDA Badge Requirements: Important notification for employees working at an airport or maintenance hangar: Employees will be required to obtain a SIDA badge provided by the airport authority and maintain good standing in order to keep their SIDA badge. Alaska Airlines, Hawaiian Airlines & Horizon Air are regulated by the Department of Transportation (DOT – regulations, 49 CFR part 40) and all applicants are advised that post-offer and/or pre-employment drug testing will be conducted to determine the presence of marijuana, cocaine, opioids, phencyclidine (PCP) and amphetamines or a metabolite of these drugs prior to any offer or employment or transfer into a safety-sensitive position.

HOUR

Alaska Airlines

Line Aircraft Technician

Appcast PX 2

ADAPTED_NOW

Johnson Service Group is looking for an Airframe & Powerplant Licensed Technician with a preferred 2+ years of experience in aircraft maintenance. Maintain detailed documentation of all work performed, including maintenance logs and reports.

<div>
<div>
<h4><strong>At JSG, We Understand People</strong></h4>
</div>
</div>
<div>
<div>
<p>It is our mission to empower people, help our clients reach their goals, and hire motivated individuals.</p>
<p>Since our start in 1984, we’ve worked hard to establish our present position as the most effective cross-industry staffing and consulting solution available.</p>
<p>Headquartered in Chicago, IL with local offices throughout the United States and Canada, JSG proudly serves a diverse range of industries with the right solutions to help clients reach their company goals. Our client-centric approach enables us to create personalized solutions for businesses in need of top-tier talent.  Our dedication doesn’t stop at our clients. We strive to connect candidates with opportunities that match their skills and goals. More than just a go-between, we are a dependable bridge, uniting top talent with suitable opportunities, facilitating shared opportunities and growth.</p>
</div>
</div>

Johnson Service Group

A&P Tech - Cirrus

Advanced knowledge of aircraft common and special tools and test equipment, aircraft technical orders/job guides/publications and schematic diagrams, drawings, charts and technical publications, aircraft engine, landing gear, and flight control systems. Perform scheduled/unscheduled maintenance, servicing, launch and recovery, corrosion control, and inspection, and routine through complex maintenance of aircraft, aircraft sub- systems, and components, as required.

Amentum

Aircraft Maintenance Supervisor

sourcestack_via_bold

Support Design for Manufacturability (DFM) efforts, working closely with internal and external manufacturing teams to refine parts and processes—including additive manufacturing, CNC machining, sheet metal, injection molding, and composite tooling and fixturing. Export Control Compliance To conform to U.S. government export control regulations, including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or otherwise eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

Firestorm

Senior Mechanical Engineer, Aircraft

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.

Kay and Associates, Inc.

Aircraft Mechanic II Airframes

Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair.

Aircraft Mechanic I Flight Line

Aircraft Mechanic II Flight Line

If so, Northrop Grumman Aeronautics Systems has an opening for an CLS - F-35 Aircraft Mechanic 3/4 - Powerplants to join our team of qualified, diverse individuals within our Aircraft Solutions Business Unit at MCAS Miramar. Ensure aircraft are in exceptional mechanical condition and safe for flight by performing maintenance, inspections, and servicing requirements on all aircraft systems in accordance with JTD and all applicable program and service guidance.

YEAR

<p>Northrop Grumman solves the toughest problems in space, aeronautics, defense and cyberspace to meet the ever-evolving needs of our customers worldwide. Our 90,000 employees are Defining Possible every day using science, technology and engineering to create and deliver advanced systems, products and services. Northrop Grumman careers and internships are as varied as your interests, with a lifetime of potential that will allow you to work together with people from many backgrounds, personal passions and disciplines. </p>
<br>
<p>© 2020 Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. U.S. Citizenship is required for most positions. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO</p>

Northrop Grumman Corp

CLS - F-35 Aircraft Mechanic 3/4 - Powerplants

FULL_TIME

OTHER

Provides support to 3 rd Marine Aircraft Wing (MAW) Fleet Replacement Squadron (FRS) Marine Light Attack Helicopter (HMLAT)-303 Corrosion Control, Tool Room, and Organizational Level (O-Level) Maintenance on H-1 aircraft in accordance with the Naval Aviation Maintenance Program (NAMP), applicable technical data, and federal contract requirements. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.

Kay and Associates

AIRCRAFT WORKER

equestftpin

Provides support to 3rd Marine Aircraft Wing (MAW) Fleet Replacement Squadron (FRS) Marine Light Attack Helicopter (HMLAT)-303 Corrosion Control, Tool Room, and Organizational Level (O-Level) Maintenance on H-1 aircraft in accordance with the Naval Aviation Maintenance Program (NAMP), applicable technical data, and federal contract requirements. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.

Perform equipment pre-operational check and maintenance of all work center support equipment/IMRL; operate ground support equipment such as electrical power supply, tow tractors, light carts and engine starting units; check for fuel contamination by draining samples from low point drains; replenish fuel, oil, water, waste system chemicals, oxygen, and hydraulic fluid; and clean exterior and/or interior of aircraft, using portable platform ladders, brushes, rags, water hose, and vacuum. The Aircraft Worker performs pre/post-operational checks, fueling and operation of aircraft & support equipment, to include conditional/scheduled inspections and periodic maintenance.

Aircraft Worker

ea_via_bold

Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.

Aircraft Mechanic I Avionics

Provides support to 3rd Marine Aircraft Wing (MAW) Fleet Replacement Squadron (FRS) Marine Light Attack Helicopter (HMLAT)-303 Corrosion Control, Tool Room, and Organizational Level (O-Level) Maintenance on H-1 aircraft in accordance with the Naval Aviation Maintenance Program (NAMP), applicable technical data, and federal contract requirements. Review Maintenance Data Reports (MDRs)/ Naval Aviation Logistics Command Management Information System for Organizational Maintenance Activities (NALCOMIS) reports/inquiries, Maintenance Action Forms (MAFs), Work Orders (WO's), DRs, and hazard reports for discrepancy trends and specific problem areas in areas of responsibility.

Aircraft Mechanic III Quality Assurance Representative

Aircraft Mechanic I (Airframes)

Aircraft Mechanic I Airframes

Replaces or repairs worn or damaged components, such as generators, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or crane, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Leadership ability is required, assign and monitor; Ensure safety procedures are followed for the following: adjustment, repairs, or replace any aircraft system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing gearbox, cleaning screens and filters, greasing moving parts, checking brakes and corrosion prevention of aircraft.

Aircraft Mechanic II Airframe

Must be competent and knowledgeable in the repair and maintenance of both fixed-wing and rotary-wing aircraft and aircraft systems to include airframes, structural, hydraulics, fuel and electrical systems, and aircraft engines. The CBP Aircraft Mechanic performs maintenance, overhaul, repair, inspection, and aircraft servicing functions on assigned aircraft within an aircraft maintenance and operations environment and in accordance with applicable instructions.

Aircraft Mechanic

Experience with removal/installation of fighter aircraft canopies, ejection seats, maintaining and inspecting canopies, explosive devices, inventories, stores, removal and replacement of seat Cartridge Actuated Device/Pneumatic Actuated Device (CAD/PAD) explosive items. F-135 Power plant engine run certification, F-35 avionics systems, fighter aircraft crew escape systems (i.e., canopy and ejection seat), experience in structural repairs and low observable system maintenance are highly desirable.

CLS - F-35 Aircraft Mechanic 3/4 - Egress / Seat Shop

Ability to work a flexible work schedule that may include extended shifts, holidays, and weekends and support on call status for 24 hours-a-day, 7 days-a-week, 365 days a year. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.

Northrop Grumman

F35 Aircraft Mechanic 3/4 - CFT (LO / Structures)

Structural, composite, mechanical and electrical systems and associated regulations; and, related assembly/installation processes, tools, composites, templates, fixtures, testing and measuring devices as well as judgment to determine correct tool(s) and some experience. Under general supervision, this position is responsible for assisting in a variety of moderately complex structural, composite, mechanical and/or electrical operations to ensure appropriate aircraft structural, avionics, and electrical systems are installed, tested and operational.

Aircraft Technician Jobs in Poway, CA

Line Aircraft Technician Alaska Airlines

A&P Tech - Cirrus Johnson Service Group

Aircraft Maintenance Supervisor Amentum

Senior Mechanical Engineer, Aircraft Firestorm

Aircraft Mechanic II Airframes Kay and Associates, Inc.

Aircraft Mechanic I Flight Line Kay and Associates, Inc.

Aircraft Mechanic II Flight Line Kay and Associates, Inc.

CLS - F-35 Aircraft Mechanic 3/4 - Powerplants Northrop Grumman Corp

AIRCRAFT WORKER Kay and Associates

AIRCRAFT WORKER Kay and Associates, Inc.

Aircraft Worker Amentum

Aircraft Mechanic I Avionics Kay and Associates, Inc.

Aircraft Mechanic III Quality Assurance Representative Kay and Associates, Inc.

Aircraft Mechanic I (Airframes) Kay and Associates

Aircraft Mechanic I Airframes Kay and Associates, Inc.

Aircraft Mechanic II Airframe Amentum

Aircraft Mechanic Amentum

CLS - F-35 Aircraft Mechanic 3/4 - Egress / Seat Shop Northrop Grumman Corp

F35 Aircraft Mechanic 3/4 - CFT (LO / Structures) Northrop Grumman

Integration Technician II General Atomics

Similar Job Searches

See More Jobs

Stand out to leading employers.