Aircraft Technician Jobs in North Carolina
Med-Trans Corporation
$65239 - $94567
Andrews, NC
Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients.
HSGI, Inc.
$68640 - $73320
Kinston, NC
Work with the team to conduct preflight and post flight inspections on B747 aircraft, refuel aircraft, reposition aircraft, repair any aircraft systems written up during flight. Work with the team to conduct pref-light and post flight inspections on B747 aircraft, refuel aircraft, re-position aircraft, repair any aircraft systems.
HSGI, Inc.
Kinston, NC
Work with the team to conduct preflight and post flight inspections on B747 aircraft, refuel aircraft, reposition aircraft, repair any aircraft systems written up during flight. Work with the team to conduct pref-light and post flight inspections on B747 aircraft, refuel aircraft, re-position aircraft, repair any aircraft systems.
HSGI, Inc.
$50438 - $67592
Kinston, NC
Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems.
Republic Services
Spindale, NC
POSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.
HSGI, Inc.
Kinston, NC
Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. HSGI, Inc. is a full service staffing company supplying qualified technical and professional employees to the most reputable companies in the Aerospace/Aircraft industry—across the United States and abroad.
HSGI, Inc.
$50438 - $67592
Kinston, NC
Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. The Sheetmetal Technician works under general supervision to safely layout, fabricate, and install parts, equipment and fabricated items on aircraft following established operating procedures.
HSGI, Inc.
$50438 - $67592
Kinston, NC
Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. The Sheetmetal Technician works under general supervision to safely layout, fabricate, and install parts, equipment and fabricated items on aircraft following established operating procedures.
Techlink Systems Inc
$25 - $28
Chapel Hill, NC
The Auxiliary Operator assists in the safe start-up, operation, and shutdown of plant equipment from outside the control room, strictly adhering to all safety and environmental rules and regulations to protect employees and public safety. Reporting to the Operations Shift Supervisor, the Auxiliary Operator operates, maintains, troubleshoots, and repairs instrumentation, mechanical and electrical equipment associated with the power plant.
HSGI, Inc.
$60875 - $81120
Kinston, NC
Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. The Sheetmetal Technician works under general supervision to safely layout, fabricate, and install parts, equipment and fabricated items on aircraft following established operating procedures.
Apollo Professional Solutions
Jacksonville, NC
Independently performs routine and complex functional/diagnostic tests and solves problems aerospace/missile systems, using monitoring instruments and bench/automated test equipment, to resolve root cause of initial or isolated failures. Your duties will include (but are not limited to): Independently assembles, disassembles and fixes numerous assemblies by changing, removing and replacing aerospace components, using general aerospace maintenance practices and aerospace product specifications to correct failures.
The Structures Company, LLC
$33
Greensboro, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Perform scheduled and unscheduled inspections, maintenance, and repairs on airframe and power plant systems per approved methods and practices.
The Structures Company, LLC
$33
Greensboro, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Perform inspections, maintenance, and repairs on airframe and powerplant systems in accordance with approved methods and practices.
The Structures Company
$33 - $45
Greensboro, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Perform scheduled and unscheduled inspections, maintenance, and repairs on airframe and power plant systems per approved methods and practices.
The Structures Company, LLC
$35
Seymour Johnson AFB, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. 4+ years of related experience, or an equivalent combination of education and experience (e.g., vocational training, Associate degree with 2+ years of experience).
The Structures Company
$33 - $45
Greensboro, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Perform inspections, maintenance, and repairs on airframe and powerplant systems in accordance with approved methods and practices.
The Structures Company, LLC
$36
Kinston, NC
As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Perform a range of repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies.
The Structures Company
$35 - $43
Seymour Johnson AFB, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. 4+ years of related experience, or an equivalent combination of education and experience (e.g., vocational training, Associate degree with 2+ years of experience).
The Structures Company
Kinston, NC
As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Perform a range of repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies.
Akima
Pope Army Airfield, NC
At ATS, the work you do every day makes a difference in the lives of our 15,000 Iñupiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States. + Must have thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair.
PSA Airlines
Charlotte, North Carolina
Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.
American Airlines
Charlotte, NC
Our 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. They do this by effectively managing the workload, resources, and work relationships of both internal customers & support groups and external regulatory authorities & vendors.
American Airlines
Charlotte, NC
Our 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. + Responsible for leading a team of supervisors, crew chiefs, aircraft maintenance technicians, and administrative team members as a key member of the dynamic and fast-paced American Airlines Maintenance organization.
INTER-OP NET
Elizabeth City, NC
Repair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns, and drills. Replace or repair worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment.
INTER-OP NET
Elizabeth City, NC
Repair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Replace or repair worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment.
Army National Guard Units
Morrisville, NC
troubleshoot, diagnose, and perform unscheduled maintenance on assigned and transient aircraft; perform full range of repair and testing of aircraft systems, assemblies and surfaces; diagnose and identify problem areas and determine extent of repairs required; remove components and assemblies, repair or replace defective parts and components and reassemble repaired items into aircraft; install, align, and make adjustments to major components and assemblies such as engines, propeller/rotors, transmissions, hydraulic systems, etc. conduct ground functional test of aircraft systems; service aircraft with oil, de-icing fluid, fuel, and hydraulic fluid; launch and recover assigned and transient aircraft; perform inspections prior to takeoff; inspect for conditions such as oil, fuel, and hydraulic leaks, cut lines, tires and loose panels; incumbent may be required to maintain Airframe (A) and Power plant (P) certification (license) by the Federal Aviation Agency (FAA).
Akima
Pope Army Airfield, NC
This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, plumbing and hydraulic units, using hand tools, power tools, machines and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. + This worker will read and interpret maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
INTER-OP NET
Elizabeth City, NC
Repair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Replace or repair worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment.
Airline Maintenance Service
Greensboro, NC
Airline Maintenance Service, Inc. (AMS) is looking for several certificated A/P's to become part of our growing team in GSO, CLT, COU, and BNA. Drug screening and background check are part of our hiring process and are required to access secure areas of airports if required.
Akima
Jacksonville, NC
As the Site Lead, this employee will be responsible for leading the day-to-day operation of a Corrosion Control Services team that supports eleven United States Marine Corps operational and training squadrons responsible for organizational (O) and intermediate (I)-level aircraft maintenance. + Possesses comprehensive knowledge of Navy and/or Marine Corps O and I-level aviation maintenance, to include scheduled and unscheduled aircraft maintenance, aircraft inspection and repair, quality assurance, personnel qualifications.
The Structures Company, LLC
$29
Charlotte, NC
Education and experience typically acquired through basic education (e.g., High School diploma or GED) and typically 1+ years of related work experience, or an equivalent combination of education and experience (e.g., vocational training or Associate degree). Assist in troubleshooting pneumatic, hydraulic, electrical, and avionics systems to isolate mechanical and/or electrical/electronic faults and support repair of faulty components.
The Structures Company
$29 - $36
Charlotte, NC
Education and experience typically acquired through basic education (e.g., High School diploma or GED) and typically 1+ years of related work experience, or an equivalent combination of education and experience (e.g., vocational training or Associate degree). Assist in troubleshooting pneumatic, hydraulic, electrical, and avionics systems to isolate mechanical and/or electrical/electronic faults and support repair of faulty components.
Mountain Air Cargo
Kinston, NC
Responsible for the effective use of available manpower to accomplish task assignments requested by Hangar/Line Manager or MAC Maintenance Control to the highest level of reliability and safety in accordance with all applicable MAC, manufacturer and FAA policies, procedures, manuals and regulations. Maintains and repairs aircraft avionics, electrical, and flight environment/air data components in accordance with Company and manufacturer’s manuals, including policies, bulletins, and orders.
Mountain Air Cargo
Kinston, NC
Monitors the Master Training Status List (GMM-MT-1908) and Authorization List (GMM-MT-1915) to assure that an adequate amount of station personnel is trained, qualified, and available to meet the Heavy Maintenance Facility mission requirements. • Updates schedule daily and notifies VPM, DOM, Maintenance Control, Technical Services, General Manager, Lead Technicians and Chief Inspector of changes weekly.
The Structures Company, LLC
$26
Charlotte, NC
Ability to meet physical requirements: flexion/extension (head bent down/up), kneeling, bending at the waist, reaching overhead, twisting, standing, walking, climbing/balancing (stairs, ladders, scaffolding), crawling, and crouching. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.
Victory Lane Aviation LLC
Charlotte/Concord, NC
The AOG Flex Maintenance Technician works directly with the AOG Manager to ensure AOG, unscheduled and scheduled aircraft are supported at JQF, CLT and surrounding areas. Work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms.
Air Methods
Rocky Mount, North Carolina
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. • Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations.
Victory Lane Aviation LLC
Charlotte/Concord, NC
Actual work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms. Completing tasks assigned to himself / herself in accordance with the procedures set forth in VLA’s Repair Station and Quality Control Manual (RSQCM), and / or the FAR’s as applicable.
The Structures Company
$26 - $31
Charlotte, NC
Ability to meet physical requirements: flexion/extension (head bent down/up), kneeling, bending at the waist, reaching overhead, twisting, standing, walking, climbing/balancing (stairs, ladders, scaffolding), crawling, and crouching. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.
EagleView
$22 - $26
Burlington, North Carolina
The compensation offered to the successful candidate will be based on a variety of factors, including but not limited to, the candidate’s work experience, education and licenses, work-related training, key skills, the core duties of the role and its associated responsibilities, additional benefits offered, and the location where the work will be performed. Ability to read and understand maintenance manuals, Illustrated Parts catalogs (IPCs), service instructions, service bulletins, and Airworthiness directives (ADs) in both paper print and electronic format.
Victory Lane Aviation LLC
Charlotte/Concord, NC
Actual work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms. Duties include the following (other duties may be assigned as required by management): Responsible for installing, inspecting, testing, adjusting, and repairing electronic equipment on aircraft.
Victory Lane Aviation LLC
Charlotte/Concord, NC
Completing tasks assigned to himself / herself in accordance with the procedures set forth in VLA's various maintenance manuals (Repair Station & Quality Control Manual and Air Carrier Operations General Maintenance Manual). Must be a highly organized and have effective communication skills to efficiently and clearly receive and communicate pass down/hand-off of work in process to include new and completed work.
EagleView
$26 - $32
Burlington, North Carolina
The candidate will also be responsible for inspections, repairs, modifications, periodic maintenance, and service of aircraft within the limits of the employee’s Federal Aviation Association (FAA) Airframe & Power Plant (A&P) certificate with respect to Part 91 operations. • Experienced with reading and understanding maintenance manuals, Illustrated Parts catalogs (IPCs), service instructions, service bulletins, and Airworthiness directives (ADs) in both paper print and electronic format.
TAT Technologies Ltd
$43680 - $52000
Greensboro, NC
Responsible for the disassembly, cleaning, analytical inspection, repair schemes, painting, assembly, testing and travelers related to LRUs, components, parts and tools. APU (Auxiliary Power Unit) is a turbine engine utilized on the aircraft to provide electrical and pneumatic power during periods when the main engines are not running.
TAT Technologies Ltd
$45760 - $52000
Greensboro, NC
Replaces or repairs damaged or worn engine parts and component parts using general hand tools, special tools, pneumatic tools and precision measuring equipment. The following is a list of job duties that an APU Assembly Technician will perform: Responsible for the assembly, testing, and travelers related to LRUs, components, parts and tools.
TAT Technologies Ltd
$43680 - $50000
Greensboro, NC
The following is a list of job duties that an APU Analytical Technician will perform: Primarily responsible for the analytical inspection, repair schemes, tagging, entering parts and components into inventory, opening sub-work orders and travelers related to LRUs, components, parts and tools. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions.
The Structures Company, LLC
$35
Greensboro, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements.
The Structures Company, LLC
$26
Greensboro, NC
As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Familiarity with model-based machining, CATIA, 3D printing, Insight software, GrabCAD Print, and OMAX waterjet software.
AAR
GREENSBORO, NC
Physical Demands/Work Environment: • The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility.
AAR
GREENSBORO, NC
Physical Demands/Work Environment: • The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility.