NewFoil Bearing Engineer Barber-Nichols, LLCFoil Bearing EngineerColorado, TX$80,000–$100,000 / yearITAR Requirements: To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Barber-Nichols must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e., current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158. Examples may include broader bearing technology development and analysis, turbomachinery analysis including structural and thermal FEA and CFD, as well as testing and performance data support for general turbomachinery development.
NewMaintenance Engineer Property ManagementMaintenance EngineerRockwall, TexasAssist in checking and making routine repairs and assist on major repairs of all hotel equipment including small appliances, kitchen equipment, laundry equipment, boilers, pool equipment, HVAC, hand and power tools and general plumbing systems and fixtures such as pipelines, toilets and sinks, kitchen and laundry equipment. Assist in checking electrical systems such as air conditioning controls, television sets, lighting systems, and make minor repairs and/or replacement.
Process Engineer - Plastics Blow Molding Greif BrothersProcess Engineer - Plastics Blow MoldingBaytown IBC, TX$101,800–$173,300 / yearPromote improvements on the production process through Kaizen, VSM, and other lean techniques in conjunction with OPEX, with emphasis on productivity gains, labor optimization, quality, seeking new methods or technologies, and replicating them in other plants. The Process Engineer applies knowledge of mechanical, hydraulic, pneumatic, and electrical controls, and PLC programming to support projects for the repair, upgrade, or replacement of facility equipment and controls in a plastic manufacturing environment.
Project Engineer I Sierra Nevada CorpProject Engineer IPlano, TXJoin the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems.
Product Support Engineer Safran SAProduct Support EngineerGrand Prairie, TXCompany: Safran Electronics & Defense, Avionics USA Job field: Mechanics Location: Grand Prairie, Texas, United States Contract type: Permanent Contract duration: Full-time Required degree: Bachelors Degree Required experience: More than 3 years Professional status: Employees / Staff Salary range: Based on Market Rate ITAR: ITAR Controlled position. Provide Technical Support/Assistance related to Aeronautic repair station; interact and collaborate with cross-functional teams, operations, quality, program management, suppliers and customers to resolve problems and implement solutions.
Production Chief Engineer The Boeing CoProduction Chief EngineerPlano, TX$165,000–$224,250 / yearThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Drive New Product Introductions (NPI) readiness and DFM/DFT (Design for Manufacturing & Test), resolve product and process issues through root cause and corrective actions, and mentor teams while embedding Safety, Quality, and Lean improvements across programs.
Lead Autonomy Software Engineer STRLead Autonomy Software EngineerArlington, Texas$174,000–$225,000 / yearLeadership : lead small, focused teams to implement and test real-time applications featuring open architecture software principles, implementing real-time systems in Modern C++ from verified algorithms written in higher-level languages such as MATLAB. SAAM is developing software and hardware tools and datasets to support these analyses, including algorithms, processing chains, and scenarios to inform and deploy onto both prototype demonstration systems & operational systems.
Sr Mechanical Engineer - Federal Experience AECOMSr Mechanical Engineer - Federal ExperienceDallas, TXWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.
Sr Mechanical Engineer – Federal Experience AECOMSr Mechanical Engineer – Federal ExperienceDallas, TX$150,000–$180,000 / yearPerform Construction Administration services, including review of shop drawings, RFI’s and review of contractor proposed change orders + Evaluate feasibility of alternative design approaches in conjunction with senior team members + Perform site/field visits to ascertain existing conditions including equipment condition evaluations + Organize/plan projects to ensure quality controls and project criteria are met and within budget + Assist in preparing proposals and presenting to Clients + Assist with mentoring of junior staff within the Mechanical Department + Review and edit specifications + Interact and work with a diverse set of clients and subcontractors **Qualifications** **Minimum Requirements** + Bachelor’s degree in Mechanical Engineering from an ABET accredited Mechanical Engineering Program + 6+ years of experience in mechanical design of HVAC and Plumbing systems or demonstrated equivalency of experience and/or education + This position requires U.S. citizenship due to federal contract/security requirements **Preferred Requirements** + Professional Engineer (PE) + **1** 0+ years of experience in mechanical design of HVAC and Plumbing systems + Experience using AutoCAD and Revit + Ability to interact with others on a multi-discipline team + Ability to work on multiple projects at once + Excellent communications skills with the ability to present designs to clients + Good time management skills, a strong work ethic and attention to detail + Proficient in Building Load Calculation and Energy Modeling + Proficient in the design of plumbing systems including sanitary, storm, and water distribution systems + Energy Modeling experience a plus + Cost estimating experience a plus + Experience with Design-Build and other Alternate Delivery practices a plus + Experience with Instrumentation and Controls design a plus + Excellent Communications Skills with the ability to present designs to clients + Additional Industry Certifications such as LEED AP, CxA or CEM + Federal experience; NAVFAC, USACE, VAMC, DOD or USAF experience preferred **Additional Information** At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. **ReqID:** J10156604 **Business Line:** B&P - Buildings & Places **Business Group:** DCS **Strategic Business Unit:** West **Career Area:** Engineering **Work Location Model:** Remote **Compensation:** USD 150000 - USD 180000 - yearly
Supplier Engineer Firehawk Aerospace IncSupplier EngineerTXAbout Firehawk Aerospace Firehawk Aerospace is pioneering the development of additively manufactured rocket propulsion systems, combining advanced manufacturing techniques with innovative engineering to deliver safer, more reliable, and cost-effective solutions for aerospace and defense. ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Midstream Project Engineer HF Sinclair CorpMidstream Project EngineerDallas, TXHF Sinclair owns and operates refineries located in Kansas, Oklahoma, New Mexico, Wyoming, Washington and Utah and markets its refined products principally in the Southwest U.S., the Rocky Mountains extending into the Pacific Northwest and in other neighboring Plains states. HF Sinclair Corporation, headquartered in Dallas, Texas, is an independent energy company that produces and markets high-value light products such as gasoline, diesel fuel, jet fuel, renewable diesel and other specialty products.
Senior Project Engineer Bodycote plcSenior Project EngineerDallas, TXProven record of managing and delivering multiple projects ranging in level of complexity and budgets of $15M or greater including equipment installs, brown field and green field projects, on time and within budget while maintaining original scope of work. The Senior Project Engineer will work closely with a cross-functional team, including operations, quality, safety and other stakeholders, to develop project scope, specifications, timelines, budget and deliverables.
Traffic & Revenue Engineer Ferrovial SETraffic & Revenue EngineerDallas, TXThe Traffic and Revenue Engineer utilizes the knowledge gathered through the analysis of the data to model the traffic impact from a variety of design changes and develop short-term and long-term traffic as well as revenue forecasts of the Dallas concessions. The North Tarrant Express (NTE) was the first design-build-finance-operate-maintain managed lanes project in Texas and consisted of the complete reconstruction of 13.3 miles of the existing I-820/SH-183 corridor between Dallas and Fort Worth.
NewEmbedded Software Engineer Bright Vision TechnologiesEmbedded Software EngineerFlower Mound, TXRemoteFull timeYou will collaborate closely with hardware engineers, systems architects, electrical engineers, QA teams, and product managers to build embedded software solutions supporting mission-critical products deployed across enterprise and industrial environments. We are seeking an experienced Embedded Software Engineer to design, develop, and optimize firmware and embedded software for next-generation connected devices, industrial automation systems, automotive platforms, medical devices, and IoT products.
Senior Engineer, Network (R5488) Shield AI IncSenior Engineer, Network (R5488)Dallas, TX$120,000–$190,000 / yearWhat you'll do: Design and build custom, resilient Layer 2 / Layer 3 network topologies optimized specifically for V-BAT mission profiles, focusing on device isolation, dynamic traffic management, and transmitting traffic across multiple links. Job Description: As a Senior Software Engineer (Networking & OS) on V-BAT, you will be instrumental in designing, implementing, and optimizing the network infrastructure for our Unmanned Aerial System (UAS) which is deployed in some of the most challenging environments worldwide.
Commercial Construction Project Engineer HITT ContractingCommercial Construction Project EngineerDallas, TexasMaster required job-specific and technical skills in order to promote to an assistant superintendent or assistant project manager following the 12-month training program including, but not limited to, the ability to: Set up and maintain jobsite office and all jobsite records, including project directory, construction documents, subcontractor directory, daily reports, submittal logs, RFI logs, subcontractor correspondence, etc. Commit to being fully onsite for the duration of the 12-month training program to fully shadow, learn, and gain hands-on experience with the day-to-day operations of your assigned project(s) .
Commercial Construction Project Engineer - 2026 HITTCommercial Construction Project Engineer - 2026Dallas, TXMaster required job-specific and technical skills in order to promote to an assistant superintendent or assistant project manager following the 12-month training program including, but not limited to, the ability to: Set up and maintain jobsite office and all jobsite records, including project directory, construction documents, subcontractor directory, daily reports, submittal logs, RFI logs, subcontractor correspondence, etc. Ability to learn sector- and project-specific software systems, including but not limited to: Microsoft Office 365 (Project, Excel, Word, Outlook, PowerPoint, etc.), ProCore, Adobe Suite, BlueBeam, and JD Edwards software suite.
Controls Engineer, Data Center Engineering Apple IncControls Engineer, Data Center EngineeringDallas, TX5+ years of engineering experience with control systems in data centers or mission-critical environments for both electrical power and mechanical/HVAC systems Understanding of controls for high-availability electrical systems (such as EPMS and MV PDCS) and mechanical systems (such as chilled water plants and BAS infrastructure) Experience programming DDC/PLC controllers and redlining controls drawings. Proficiency with AI tools to enhance daily work - including AI-assisted authoring for specifications and sequences of operations, AI coding assistants for control logic and Python development, and applied understanding of how AI/ML-driven analytics can be layered over operational data platforms (such as DCIS/MQTT) to enable predictive fault detection, anomaly detection, and performance optimization.
DevOps Engineer Union TechnologiesDevOps EngineerDallas, TexasUnion Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. As a DevOps Engineer , you will design, automate, and maintain secure, high-availability infrastructure that supports mission-critical applications both on-premises and in the cloud.
Engines Test Performance Engineer Safran SAEngines Test Performance EngineerGrand Prairie, TXCompany: Safran Helicopter Engines Job field: Customer services and support Location: Grand Prairie, Texas, United States Contract type: Permanent Contract duration: Full-time Required degree: Bachelors Degree Required experience: More than 3 years Professional status: Professional, Engineer & Manager Salary range: tbd ITAR: ITAR Controlled position. The engineer will collaborate closely with operations, supply chain, technical support, and quality teams to maximize pass-through rates and continuously improve testing efficiency and quality across all engine variants.
Automation Engineer II Schneider Electric SEAutomation Engineer IIDallas, TXTwo-year degree or 5+ years of equivalent work experience preferred Experience with low voltage electrical installation for Building Automation Systems or equivalent Ability to manage multiple projects with varying demands and requirements ranging from small projects to large projects, self-performed or 3rd party execution, and complexity. This position is for building automation engineering/installation that will be responsible for the implementation of quality building automation control practices while providing engineering/technical oversight for construction site projects for a retrofit/energy performance contracting team.
Controls Service Engineer II Schneider Electric SEControls Service Engineer IIDallas, TXWork on innovative projects Supportive team environment with mentorship from seasoned technical professionals Opportunities to develop specialized expertise in cutting-edge technologies Career growth within a technical track that values deep domain knowledge Bring your engineering talent to a team that's ready to invest in your future - apply today! Experience with low voltage electrical installation for Building Automation Systems or equivalent Ability to manage multiple projects with varying demands and requirements ranging from small projects to large projects, self-performed or 3rd party execution, and complexity.
NewBuilding Engineer NDBTBuilding EngineerFrisco, TXThe Building Engineer is responsible for assisting the Assistant Chief Engineer with the operation, maintenance, repair, and overall condition of the NDBT’s facilities, equipment, and building systems across multiple locations in the Dallas community. The Building Engineer performs preventive maintenance, coordinates repairs with outside vendors, responds to facility emergencies, and supports special projects, renovations, and bank events.
NewMechanical Review Board Design Engineer Butler America Aerospace LLCMechanical Review Board Design EngineerGrand Prairie, TX$60–$71 / hourYour responsibilities will include: Participate as a key member in the Material Review Board (MRB) process, including reviewing non-conforming hardware for performance impacts, identify appropriate root cause and ensure corrective action is taken to prevent recurrence. As the Mechanical Review Board Engineer, you will be responsible for supporting the production programs by identifying and resolving production issues, defects, and failures.
Program Chief Engineer Firehawk Aerospace IncProgram Chief EngineerTXThe role will partner closely with Program Management and functional leadership to communicate program status, resolve technical issues, maintain alignment to internal and customer commitments, and support successful product maturation from concept through production. ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
NewSenior Storage Engineer Humana IncSenior Storage EngineerFrisco, TX$106,900–$147,000 / yearThe Senior Storage Engineer (L3) - Backup, Recovery & Data Protection Engineering is responsible for the design, engineering, implementation, operation, and continuous optimization of enterprise backup, recovery, cyber resilience, and data protection solutions supporting Humana's mission-critical business services and healthcare platforms. Work at Home Requirements: To ensure Home or Hybrid Home/Office employees' ability to work effectively, the self-provided internet service of Home or Hybrid Home/Office employees must meet the following criteria: At minimum, a download speed of 25 Mbps and an upload speed of 10 Mbps is required; wireless, wired cable or DSL connection is suggested.
Project Engineer Braun Intertec CorporationProject EngineerDallas, TexasSupport (either directing or on occasion assist) with field testing, as needed, including window water spray testing, blower door testing, thermographic (infrared) inspections and waterproofing/air barrier testing/inspections. · Assist in the review of analysis of building component failures and third party review of construction documents and specifications for building envelope components.
Electrical Engineer III - Product Development Air Distribution Technologies CareersElectrical Engineer III - Product DevelopmentPlano, TexasASC is seeking a highly skilled Electrical Engineer III – Product Development to support the design, development, and performance optimization of electrical systems for air-cooled chiller products. The ideal candidate will bring strong technical expertise in electrical systems design, control strategies, and product development within HVAC or related industrial equipment environments.
Applications Engineer Distribution NowApplications EngineerGrand, TXProvides ALL cut sheets and data for every major piece of equipment in the unit (motors, pumps, valves, compressors, dryers, generators, RV's, PCV's, Filter vessels, tanks, strainers, etc.), Reviews all BOM's and approve them and drawings for construction. Ability to obtain technical expertise in various core products including air compression, gas compression, pumps, blowers, generators, filters, etc.
Mechanical Engineer I Gray IncMechanical Engineer IDallas, TXGray is a family-owned, fully integrated global service provider specializing in engineering, design, construction, digital, equipment manufacturing, and real estate services. Deeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial.
Mechanical Design Engineer Sanmina CorpMechanical Design EngineerCarrollton, TXResponsibilities include: • Mechanical housing subassembly design and module integration • PCB packaging and flex circuit integration • Optical fiber routing and interconnects • Host system integration considerations of pluggables: insertion/extraction forces, mating cycles, air vs liquid cooling • Design for manufacturability, assembly and test to ensure high volume product viability and reliability • Design verification through prototyping and device test and characterization • Tooling and fixturing requirements definition and design to support prototyping and volume production • Supplier engagement to support prototyping and high volume production • Work within a multidisciplinary development team to provide a broad range of mechanical design solutions and analysis support to meet design specifications. Minimum bachelors degree in Engineering 5+ years experience in a product development role with a focus on transceiver design AutoCAD/SolidWorks design experience with an understanding of FEA using Solidworks / Ansys or similar software tools Experience in the design of RF/Microwave/Optical packages and multi-chip modules Experience in optical and microelectronic technologies, materials, components, assembly and test processes Experience in end-to-end product development, with product manufacturing implementation considered an asset Experience with DFM and FMEA would be an asset Ability to work well within a multidisciplinary development team in a fast-paced environment Strong written and verbal communication skills are required.
DSP Engineer GarrettDSP EngineerGarland, TexasWe are currently looking to hire a DSP Engineer to perform innovative research and development using simulation tools, mathematical modeling, and the technical knowledge to create, simulate, implement, integrate and test advanced digital signal processing algorithms for metal detectors and similar high-precision instrumentation products. This position will utilize mathematical modeling of magnetic fields and digital signal processing algorithms to help develop complex magnetic sensor arrays and develop analog and digital circuitry to acquire and process high-resolution sensor data.
NewProduct Engineer Air Distribution Technologies CareersProduct EngineerPlano, TexasExperience with ANSYS CFD/FEA, Autodesk Revit, VBA programming, Phase-Gate development processes, project management, DFMA, FMEA, LabView, AS400, sheet metal forming and fabrication, air movement principles, and fan/blower laws are a plus. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear, and taste or smell.â¯.
Grade II Engineer Cousins Properties IncorporatedGrade II EngineerDallas, TXCommunication - Able to clearly express ideas; present verbal information in a straightforward manner; ask questions in order to open channels of communication; listen to understand perspective of others ask questions in order to open channels of communication. Possess a trained and working knowledge with the ability to troubleshoot and repair field devices such as a power induction unit, variable volume units (PIU/VAV) and similar diverse types found in a commercial building.
Guidance, Navigation, and Control Engineer III - IV Kratos DefenseGuidance, Navigation, and Control Engineer III - IVArlington, TXKratos Unmanned Aerial Systems (KUAS), a division of Kratos Defense, is renowned for its expertise in developing, delivering, integrating, and supporting high-performance, cost-effective, jet-powered Unmanned Aerial Systems (Targets and Tactical). Kratos Defense & Security Solutions, Inc., is a leading defense technology company focused on unmanned systems, satellite communications, cyber security/warfare, microwave electronics, missile defense, training, and combat systems.
Applications Engineer Dnow IncApplications EngineerGrand Prairie, TXProvides ALL cut sheets and data for every major piece of equipment in the unit (motors, pumps, valves, compressors, dryers, generators, RV's, PCV's, Filter vessels, tanks, strainers, etc.), Reviews all BOM's and approve them and drawings for construction. Ability to obtain technical expertise in various core products including air compression, gas compression, pumps, blowers, generators, filters, etc.
Senior Engineer, Propulsion Design (R4642) HRU-TechSenior Engineer, Propulsion Design (R4642)Frisco, TexasThis role is hands-on, detail-oriented, and highly cross-functional - requiring close collaboration with propulsion REs, technicians, machinists, production, controls, airframe, and flight test teams. You will be a key contributor to turning propulsion architecture into manufacturable, testable, and flight-ready hardware across the engine, fuel, oil, and bleed air systems.
Mechanical Design Engineer - (107212) SanminaMechanical Design Engineer - (107212)Carrollton, TXWe are looking for an experienced Mechanical Engineer, with a strong background in mechanical design, and a clear focus on the physical design, thermal management and packaging of high-speed optical modules, in small form factors such as QSFP, OSFP, to support product design and analysis within a worldwide end-to-end product development team developing advanced Opto/microelectronic components, modules and sub-systems. Job DescriptionAdvanced Microsystems Technologies, AMT, is a technology division of Sanmina Corporation (Nasdaq: SANM), responsible for RF, Microelectronic, Optical components and Integrated Subsystems, providing services from design concept, through prototype design and testing, process development, assembly and test innovation, to volume manufacturing.
Senior Machine Learning Engineer STRSenior Machine Learning EngineerArlington, Texas$155,000–$195,000 / yearOur projects span multiple different data modalities and incorporate advanced algorithms, deep learning, and statistical techniques to uncover patterns in social media, structured and unstructured text, time series, geospatial, and imagery data, and must operate under challenging constraints not typically found in the commercial world. Working as part of a multidisciplinary team of researchers, engineers, and domain experts, you will bridge the gap between prototype and product by hardening solutions, building scalable backend services, and creating polished user interfaces with intuitive workflows.
Energy Engineer Nexant IncEnergy EngineerDallas, TXPrepare clear and concise technical reports summarizing energy assessment findings, VCx and RCx opportunities, recommended measures, savings calculations, project costs, incentives, simple payback, implementation details, and operational impacts. Support ongoing enhancement of the company's Cx software platform by providing user feedback, identifying opportunities to improve workflow and functionality, assisting with quality checks, and, when applicable, supporting software updates or analytical tool development using Python.
Sr. Automation & Controls Engineer (Starship) Space Exploration TechnologiesSr. Automation & Controls Engineer (Starship)Starbase, TXSpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Integration Engineer (Starship) - Night Shift Space Exploration TechnologiesIntegration Engineer (Starship) - Night ShiftStarbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
Build Engineer (Starship) Space Exploration TechnologiesBuild Engineer (Starship)Starbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
Integration & Test Engineer (Starship) Space Exploration TechnologiesIntegration & Test Engineer (Starship)Starbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
NewMaintenance Engineer Peachtree Hospitality Management LLCMaintenance EngineerRockwall, TXPart timeAssist in checking and making routine repairs and assist on major repairs of all hotel equipment including small appliances, kitchen equipment, laundry equipment, boilers, pool equipment, HVAC, hand and power tools and general plumbing systems and fixtures such as pipelines, toilets and sinks, kitchen and laundry equipment. Assist in checking electrical systems such as air conditioning controls, television sets, lighting systems, and make minor repairs and/or replacement.
Manufacturing Integration Engineer (Starship) Space Exploration TechnologiesManufacturing Integration Engineer (Starship)Starbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
Integration Engineer (Super Heavy Booster) Space Exploration TechnologiesIntegration Engineer (Super Heavy Booster)Starbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
NewWelding Build Engineer (Starship) Space Exploration TechnologiesWelding Build Engineer (Starship)Starbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
NewBuild Engineer (Super Heavy Booster) Space Exploration TechnologiesBuild Engineer (Super Heavy Booster)Starbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
NewIntegration Engineer (Starship) Space Exploration TechnologiesIntegration Engineer (Starship)Starbase, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.