Maintenance Technician (2nd or 3rd shift)

Responsibility:

Perform assigned duties

Responsible for installation, maintenance, troubleshooting and repair of facility and facility machinery.

Perform preventative and predictive maintenance on facility machinery.

Complete daily maintenance and repair logs

Maintain a clean work area.

Communicate with operators on equipment problems.

Essential Functions/Resource Provision:

1. Visually inspect machinery and equipment.           

2. Clean and lubricate machine parts, such as bearings, gears, and shafts.

3. Dismantle defective equipment and machinery and install new or repaired parts.

4. Maintain and repair building structure.

5. Operate welding equipment and cutting torch.

6. Fabricate and repair covers and guards for machinery and equipment.

7. Install and repair electrical equipment such as plc boards, transformers, control boxes and electrical components.

8. Install and repair hydraulic apparatus such as directional control valves, flow control valves, oil coolers and making and assembling hydraulic hoses.

9. Install and repair pneumatic equipment such as air tools, air compressors, air dryer and solenoid valves.

Cross Area Competencies:
 

1.      Crane Operation

2.      Forklift Operation

3.      Basic computer skills

Minimum Knowledge, Skills and Abilities:  

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

1. High school diploma or equivalent.

2. Basic reading, writing and arithmetic skills.

3. 5+ years in industrial maintenance.

4. Knowledge of Operating Standards (ISO, QS).

5. Must be able to add, subtract, multiply and divide.           

6. Maintain strict confidence, and operate with integrity and honesty.

Preferred Knowledge, Skills and Abilities:

1.      Hydraulic and pneumatic troubleshooting and repair.

2.      Electrical troubleshooting and repair.

3.      Ability to read and interpret schematics and blueprints.

4.      Ability to fabricate without drawings.

5.      Understand and use Kenwal’s lockout/tag out procedures.

6.      Ability to use electrical tools properly and safely.

Physical Requirements:

Physical demands:  (less than ¼, ¼, ½, ¾, constant)

Sitting – 1/2

Use hands or fingers to handle or feel –3/4

Reach with hands or arms – 1/2

Bending/Climbing -1/2

Talk or hear – 3/4

Vision – 3/4

Weights to be lifted:  

Up to 10 pounds –1/2

Up to 25 pounds – 1/2

Over 25 pounds – 1/4

Working Conditions:  

The physical demand and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The above is intended to describe the essential job functions, the general supplemental functions, and the essential requirements for the performance of this job.  It is not to be construed as an exhaustive statement of all supplemental requirements.  Kenwal Steel reserves the right to alter, add, modify, change, cancel some or all parts of the above as it deems necessary according to its business needs.

1. Visually inspect machinery and equipment.           

2. Clean and lubricate machine parts, such as bearings, gears, and shafts.

3. Dismantle defective equipment and machinery and install new or repaired parts.

4. Maintain and repair building structure.

5. Operate welding equipment and cutting torch.

6. Fabricate and repair covers and guards for machinery and equipment.

7. Install and repair electrical equipment such as plc boards, transformers, control boxes and electrical components.

8. Install and repair hydraulic apparatus such as directional control valves, flow control valves, oil coolers and making and assembling hydraulic hoses.

9. Install and repair pneumatic equipment such as air tools, air compressors, air dryer and solenoid valves.