Weapons Engineering Technician- Senior Bowhead / UIC Technical ServicesWeapons Engineering Technician- SeniorDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Associates Degree (or higher) in Mechanical or Electrical Engineering technical discipline or four (4) years of military weapons school focusing on medium size weapons or small munitions operation and testing, maintenance, and sustainment of weapons.
SCA Supply Technician Bowhead / UIC Technical ServicesSCA Supply TechnicianDahlgren, VASCA Supply Technician (E30-2026-25495): Bowhead seeks a Supply Technician for work on NSWC Dahlgren supporting the E30 Gun Weapon Systems Division to join our team. Processes and tracks project procurements in a prompt, cooperative, and efficient manner from pre-order through invoice payment.
Electronics Maintenance Technician II Bowhead / UIC Technical ServicesElectronics Maintenance Technician IIDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. The following certifications are also desired: IPC J-STD-001 Solder, IPC-A-610 Acceptability of Electronics Assemblies, IPC-A-600 Acceptability of Printed Boards, IPC-WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies, and IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies.
Electronics Maintenance Technician III Bowhead / UIC Technical ServicesElectronics Maintenance Technician IIIDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. The following certifications are also desired: IPC J-STD-001 Solder, IPC-A-610 Acceptability of Electronics Assemblies, IPC-A-600 Acceptability of Printed Boards, IPC-WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies, and IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies.
Engineering Technician I Bowhead / UIC Technical ServicesEngineering Technician IDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data.
Supply Technician Bowhead / UIC Technical ServicesSupply TechnicianDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Processes and tracks project procurements in a prompt, cooperative, and efficient manner from pre-order through invoice payment.
Engineering Technician V Bowhead / UIC Technical ServicesEngineering Technician VDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data.
Engineering Technician III Bowhead / UIC Technical ServicesEngineering Technician IIIDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data.
Engineering Technician VI Bowhead / UIC Technical ServicesEngineering Technician VIDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data.
Engineering Technician IV Bowhead / UIC Technical ServicesEngineering Technician IVDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data.
Engineering Technician II Bowhead / UIC Technical ServicesEngineering Technician IIDahlgren, VAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data.
Electronics Technician III JT4 LLCElectronics Technician IIILas Vegas, Nevada$81,120–$85,280 / yearEmployee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Electronic Technician - RF/RADAR JT4 LLCElectronic Technician - RF/RADARLas Vegas, Nevada$34.86–$39.22 / hourElectronic Technician III RequirementsAn associate's degree or higher from an accredited college; or technical schooling with courses in math, basic electronics, and microwave theory; or a military equivalent and a minimum of seven (7) years of hands-on experience are required for this position. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Construction Technician JT4 LLCConstruction TechnicianSalt Lake City, UtahOperate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Electronic Technician (COMM, FTS & Telemetry) JT4 LLCElectronic Technician (COMM, FTS & Telemetry)Dugway, UtahWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronics Technician II JT4 LLCElectronics Technician IIBeatty, NevadaOperate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
NewElectronics Technician - LEAD JT4 LLCElectronics Technician - LEADBeatty, NevadaWorking as a group/team lead, an Electronic Technician III, Lead specializes in ground-based electronic systems and works on various types of electronic equipment and related devices by performing a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronic Technician JT4 LLCElectronic TechnicianDugway, UtahWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electro-Mechanical Technician JT4 LLCElectro-Mechanical TechnicianDugway, UtahWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronics Technician JT4 LLCElectronics TechnicianDugway, UtahOperates and maintains electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
NewVulnerability Management Technician JT4 LLCVulnerability Management TechnicianLas Vegas, Nevada$79,040–$85,280 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. Occasional lifting (up to 20 pounds), constant sitting while using a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
NewSupply Technician JT4 LLCSupply TechnicianEdwards AFB, California$72,093–$81,104 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Engineering Technician IV JT4 LLCEngineering Technician IVEdwards AFB, California$67,000–$75,000 / yearAn Engineering Technician IV provides support to the engineering and design staff by performing a variety of more complex or non-routine assignments during the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction, and operation of diverse electronic/mechanical equipment and systems in accordance with engineering specifications. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
2026 JT4 Electronic Technician Opportunities in Las Vegas, NV JT4 LLC2026 JT4 Electronic Technician Opportunities in Las Vegas, NVLas Vegas, NevadaEquipment may include, but is not limited to, the following: transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, antenna positioning systems, Ethernet interface equipment, digital-to-analog conversion equipment and analog strip chart recorders. In addition, Electronic Technicians must meet the following qualifications: Demonstrated proficiency in general electronics (to include AC, DC, digital logic, data acquisition & solid state) and working knowledge of electronic, electro-mechanical, and computer systems along with test equipment used to maintain and repair equipment is necessary.
NewElectronic Technician - China Lake CA JT4 LLCElectronic Technician - China Lake CARidgecrest, California$76,086–$85,592 / yearWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible to perform the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Communications Technician II JT4 LLCCommunications Technician IITonopah, NevadaWorking under general technical guidance, an Electronic Technician IIspecializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Elec Tech III - Flight Test Instrumentation Technician Level III JT4 LLCElec Tech III - Flight Test Instrumentation Technician Level IIIEdwards AFB, California$84,000–$94,000 / yearApply technical knowledge of electronic principles to solve complex problems using diagrams, schematics, engineering data, and test equipment, including power systems, sensors/transducers, data/video recording, TSPI, Ethernet, and telemetry subsystems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver’s license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee’s ability to maintain employment.
2026 JT4 Electronic Technician Opportunities in Las Vegas, NV (Jump Start Students Only) JT4 LLC2026 JT4 Electronic Technician Opportunities in Las Vegas, NV (Jump Start Students Only)Las Vegas, NevadaEquipment may include, but is not limited to, the following: transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, antenna positioning systems, Ethernet interface equipment, digital-to-analog conversion equipment and analog strip chart recorders. Completion of Jump Start core classes (Math 111B, ET 131B DC for Electronics lab, ET 132B AC for Electronics lab, ET 212B Digital Logic I, ET 220B; Solid State Devices and Circuits I, and ET 228B: Data Acquisition) with a 3.0 GPA or higher.
NewEngineering Technician II | MARMC (Submarine PSSE Program) Strategic Technology Institute Inc,Engineering Technician II | MARMC (Submarine PSSE Program)Norfolk, VAp>• Support work onMissile Tube Loading/Handling Maintenance Platforms, weapon cradles, ballastcans, VLS/VPT platforms, munitions trailers, handling slings, beams,containers, deployment stands, torpedo/Tomahawk ancillary gear, and relatedPSSE/non-ordnance handling equipment. • Experience withsubmarine PSSE, non-ordnance handling equipment, VLS/VPT platforms, ballastcans, weapon cradles, AUR/AURB/AURVS/AURES, TMDs, TOTEMS, munitions trailers,slings, beams, containers, or related handling/support equipment.
NewSenior Engineering Technician V - MARMC | Naval Station Norfolk, VA Strategic Technology Institute Inc,Senior Engineering Technician V - MARMC | Naval Station Norfolk, VANorfolk, VAp>• Direct experiencewith submarine PSSE, non-ordnance handling equipment, VLS/VPT platforms,Missile Tube Loading/Handling Maintenance Platforms, ballast cans,AUR/AURB/AURVS/AURES, TOTEMS, TMDs, weapon cradles, munitions trailers, slings,beams, or weight handling equipment. • Supportmaintenance and operational procedures for AURVS, AURES, Mk 60 AURS, AURBb,ballast cans, TOTEMS, MK-48 fitment shapes, TOMFISH, TMDs, AERO 51 classmunitions trailers, MK-30/MK-34/CNU 308/Mk 793 containers, and relatedPSSE/non-ordnance support equipment.
NewProject Manager/Engineering Technician VI - NAVSEA | Norfolk, VA Strategic Technology Institute Inc,Project Manager/Engineering Technician VI - NAVSEA | Norfolk, VANorfolk, VAp>• Direct experiencesupporting submarine PSSE, non-ordnance handling systems, VLS/VPT supportequipment, missile tube loading/handling maintenance platforms, ballast cans,AUR/AURB/AURVS/AURES, TMDs, torpedo shapes, weapon cradles, munitions trailers,or related support equipment. STi is seeking a Project Manager / Engineering Technician VI tosupport MARMC Code 271 Submarine Peculiar Special & Support Equipment(PSSE) support, PSSE program management, non-ordnance handling, and VirginiaClass Weapons Cradle Warehouse support.
NewNaval Elevator Technician Epsilon SystemsNaval Elevator TechnicianNewport News, VAli>Minimum six plus years of direct experience working with the preventative/corrective maintenance and troubleshooting of shipboard weapons elevators, cargo elevators, and dumbwaiter systems. Provides technical support and assistance on electrical systems and components, supporting U.S. Navy shipboard weapons elevators, cargo elevators, and dumbwaiters.
NewElectrical Elevator Support Technician II Epsilon SystemsElectrical Elevator Support Technician IINewport News, VAli>Minimum six plus years of direct experience working with the preventative/corrective maintenance and troubleshooting of shipboard weapons elevators, cargo elevators, and dumbwaiter systems. Duties and Responsibilities: Provides technical support and assistance on electrical systems and components, supporting U.S. Navy shipboard weapons elevators, cargo elevators, and dumbwaiters.
Weapons Technician II Draken International LLCWeapons Technician IINMli>Displays proper use of all applicable technical publications, tools, test equipment, and special equipment applicable to the discipline of aircraft weapons maintenance, ensure practices lead to becoming effective Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment maintainers. Must have an in-depth working knowledge of aircraft safety directives, aircraft/vehicle movement, flight line operations, aircraft technical orders/job guides/publications (read, interpret, follow and comprehend schematics, diagrams, drawings and technical orders).
NewPrecision Weapons Technician CbPrecision Weapons TechnicianCamp Lejeune, North CarolinaWith on-site support at multiple locations worldwide, ProSol specializes in the core areas of Special Operations Planning & Support, Cyber Security & Information Technology, and Training & Education Services. Knowledge, Skills and Abilities:Able to obtain an operators’ license for non-tactical/tactical Government-owned equipment and be certified to transport AA&E.
Navy Weapons Technician - MK45 Life Cycle EngineeringNavy Weapons Technician - MK45San Diego, CA$32–$39 / hourLife Cycle Engineering (LCE) is a privately held, employee-owned company with an emphasis on "doing the right thing the right way , which applies to the way we treat our customers and employees. Essential Functions and Responsibilities: Direct, oversee repair activities, train, troubleshoot, diagnose, and maintain the following: MK45 MOD 2 or MOD 4. MK38 MOD 2 or MOD 3. MK110 Gun Mounts.
Weapon Systems Technician CACI International IncWeapon Systems TechnicianSan Diego, CA$68,400–$143,700 / yearAs an integral part of our highly experienced and capable team, you will be supporting a vital role of our customers to ensure Navy fleet gun weapon systems capability, supportability, and readiness. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
CIWS Weapon Systems Technician CACICIWS Weapon Systems TechnicianSan Diego, CaliforniaAs an integral part of our highly experienced and capable team, you will be supporting a vital role of our customers to ensure Navy fleet gun weapon systems capability, supportability, and readiness. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Advanced Weapons Elevator Technician (Engineering Technician 3) - 27714 Huntington Ingalls Industries IncAdvanced Weapons Elevator Technician (Engineering Technician 3) - 27714Newport News, VA$52,708–$66,955.20 / yearIn this role, you'll work closely with both engineering and trades teams to provide shipyard support, with a primary focus on shipboard integration, troubleshooting, testing, and in‑service repair of CVN 78 Class Advanced Weapons Elevators-particularly for the CVN‑79 program. Performs detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data.
Weapons Engineering Technician Senior Ukpeagvik Inupiat CorpWeapons Engineering Technician SeniorVAThis contract will provide configuration management (CM), logistics, mechanical and electrical engineering technician services, field service support, project management, drafting and design, technical writing, and acquisition services to the Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Unmanned & Expeditionary Weapon Systems (H40) Division and Intelligent Automation (H60) Division. Associates Degree (or higher) in Mechanical or Electrical Engineering technical discipline or four (4) years of military weapons school focusing on medium size weapons or small munitions operation and testing, maintenance, and sustainment of weapons.
Aegis Weapon System (AWS) Aegis Computer Network Technician (ACNT) Trainer GD Information TechnologyAegis Weapon System (AWS) Aegis Computer Network Technician (ACNT) TrainerKnowledge of but not limited to - the Aegis Computer Networks to include, but not limited to Local Area Networks, Switch Blade Servers, Routers, Servers, VME Chassis Structure, Fiber Optics, and Digital Interfaces on the Aegis Baselines 7.2A, &.2B, 9.A and 9.C. Possess AWS/ACNT NECs V00C/V69A, V01C/V75A, V48A, V60A, V68A. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available.
13B Cannon Crewmember - Weapons Systems Technician Army National Guard of the United States13B Cannon Crewmember - Weapons Systems TechnicianFort Belvoir, VA$200–$250 / weekYou'll deliver decisive blows to the enemy using howitzers and learn how to use high-tech cannon artillery weapons systems, plus artillery tactics and strategy. Advanced Crewmembers supervise other crewmembers in the distribution of ammunition, as well as manage cannon operations, training, and maintenance.
Weapons Technician GoGunWeapons TechnicianWinter Park, FL$24–$38The right person is a fast learner, strong communicator, flexible, and comfortable shifting between technical repair work, warehouse operations, prototyping, and occasional content-production support. GoGun is seeking a hands-on Technician / Warehouse Manager to support technical service, repairs, product development, shop operations, and content support across our product lines.
Bexar County Weapons of Mass Destruction and Hazmat Team Coordinator - C Bexar County CouncilBexar County Weapons of Mass Destruction and Hazmat Team Coordinator - CBexar County, TX$21.79–$25.61 / hourA thorough knowledge of weapons of mass destruction agent/hazardous materials response and remediation techniques; resource recovery techniques; geo-hydrologic and chemical principles; toxicology; infectious waste; underground storage tanks; chemical and laboratory techniques to identify hazardous materials, WMD agents, and epidemiological hazards; risk assessment and mitigation; and evidence gathering techniques; basic Knowledge of training and instructional techniques is required; basic knowledge of State and Federal laws and regulations relating to WMD agents and hazardous materials management and response is required. Conducts all required Hazmat/WMD Awareness, Operations, Technician, and Advanced Technician training for the Bexar County WMD/Hazmat Teams, and other Emergency Responders (including Volunteer Fire Departments, San Antonio and the other 24 cities in Bexar County).
Emergency Vehicle Upfit Technician-Sacramento Lehr AutoEmergency Vehicle Upfit Technician-SacramentoSacramento, Californiali style="margin-left:48px">Installation of specialized emergency vehicle Lightbars, Emergency lighting, Push Bumpers, Sirens, Controllers, Speakers, Partitions, Window Bars, Prisoner seats, Gun racks, in-car video, Computers, License Plate Recognition, and much more. Attributes of a Strong CandidateAbility to work with hand and power tools such as screw drivers, wrenches, hand drills, etc.
Bexar County Weapons of Mass Destruction and Hazmat Team Coordinator - C Bexar CountyBexar County Weapons of Mass Destruction and Hazmat Team Coordinator - CA thorough knowledge of weapons of mass destruction agent/hazardous materials response and remediation techniques; resource recovery techniques; geo-hydrologic and chemical principles; toxicology; infectious waste; underground storage tanks; chemical and laboratory techniques to identify hazardous materials, WMD agents, and epidemiological hazards; risk assessment and mitigation; and evidence gathering techniques; basic Knowledge of training and instructional techniques is required; basic knowledge of State and Federal laws and regulations relating to WMD agents and hazardous materials management and response is required. Conducts all required Hazmat/WMD Awareness, Operations, Technician, and Advanced Technician training for the Bexar County WMD/Hazmat Teams, and other Emergency Responders (including Volunteer Fire Departments, San Antonio and the other 24 cities in Bexar County).
WEAPONS POLICY INTEGRATION PROGRAM SPECIALIST U.S. Department of DefenseWEAPONS POLICY INTEGRATION PROGRAM SPECIALISTWashington, DC$85,447–$158,322 / yearp>PLEASE REVIEW THE BELOW LINK FOR OTHER SUPPORTING DOCUMENTS needed for proof of eligibility: https://www.dla.mil/Portals/104/Documents/Careers/downloads/DODCustomersRequiredSupportingDocumentation.pdf. Review the General Application Information and Definitions at: https://www.dla.mil/Portals/104/Documents/Careers/downloads/DoDGenAppInfo%2012-1-2020.pdf?ver=ECNbdsHtGilTd3OENN4A0Q%3d%3d.