Turbine Engineer Jobs in the United States
STS Technical Services
Erlanger, KY
In this role, you will provide engineering data, instructions, documents, and technical support that economically ensure the safety, airworthiness, and reliability of aircraft within ATA chapter subjects: 24, 26, 30, 36, 49, 70–80. Review OEM Service Bulletins, Airworthiness Directives (ADs), and Notices of Proposed Rulemaking (NPRMs) for implementation, initiating required engineering documentation based on recommended disposition.
Rolls Royce
$90985 - $136477
Indianapolis, IN
Bachelor's degree in Engineering with 2+ years of experience in design engineering, Mechanical and/or Aerospace Engineering OR; Master's degree in Mechanical or Aerospace Engineering OR; JD/PHD in Engineering. Perform a leadership role in investigations of in-service and/or development hardware issues including Engine Investigations, failure analysis, root cause / corrective action (RCCA), Technical Variance consultation, reporting, and documentation.
Rolls Royce
$94160 - $153010
Indianapolis, IN
The Rolls-Royce PHM-SDI team is seeking a skilled Prognostics & Health Management (PHM) capability to design, develop, and deploy diagnostics and engine management capabilities for F130 (B52) program. Performing system level analysis to predict and understand the behavior of the F130 engine in service to provide support for engineering investigations including Red Top Investigations and Safety Alert Reports.
Sodexo
$29.75 - $38.25
GERMANTOWN, MD
Operate and maintain stationary engines and equipment such as steam engines, boilers, air compressors, generators, turbines, and refrigeration equipment. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate.
Advanced Technical Staffing Solutions
Kansas City, MO
Experience sizing, selecting, and producing specifications for capital and balance of plant (BOP) equipment including but not limited to combustion turbines, steam turbines, heat recovery steam generators (HRSGs), emission control equipment, material handling equipment, condensers, heat exchangers, fuel gas conditioning systems, compressor equipment, water treatment systems, sample/chemical feed systems, pumps, plant utilities, control valves, instrumentation, and distributed control systems (DCS). • Well organized with a demonstrated ability to meet deadlines and operate within budgets and work directly with client engineers and maintenance teams.
TalentPro Consulting
San Diego, CA
About the Role:The Turbine Production Engineering (TPE) department provides our manufacturing, operations, and supply chain partners with technical engineering support related to Solar’s gas turbine components and assemblies. • Basic knowledge of Manufacturing Processes for some or most processes involving: - Investment / sand castings, forgings, sheet metal forming, precision machined components, plating/coating, heat treatments, brazing/welding.
System One
$160000 - $210000
Sand Springs, OK
Create, modify and review fabrication drawings, perform and/or check design calculations, and direct drafting personnel to complete design and fabrication drawings, Coordinate with other departments or functions to establish information needed to complete all technical activities (manufacturing, purchasing, welding engineer, project management). Knowledge, Skills and AbilitiesBachelor of Science degree in Engineering or related technical field from an accredited university, or Associates degree + 2 years industry related experience, or 5 years directly related industry experience showing progression to competency of essential job functions.
System One
$160000 - $210000
Cambridge, MA
Senior Project Engineer Requirements: 6 -10+ years leading engineering and/or construction on large power or process-industry projects (e.g., steam turbine or combined-cycle plants) with significant EPC or Owner’s Engineer interaction. Senior Project Engineer Responsibilities: Lead technical coordination between the company, EPC, and site owner; define scopes, interfaces, and deliverables and run design and progress reviews.
System One
Atlanta, GA
Engineers will evaluate systems and develop Design Change Packages (DCPs) for systems including turbine, generator, main power transformer, cooling, and control systems. You’ll join a collaborative team supporting the safe and sustainable future of nuclear energy with opportunities for long-term project work, career growth, and flexible work options.
System One
Spring Grove, PA
We’re looking for a driven Electrical Engineer who thrives in a dynamic industrial environment and enjoys a mix of hands-on problem solving, project management, and technical leadership. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America.
System One
$100000 - $150000
Lake Mary, FL
Key words for applicable instrumentation skill set: Pressure transmitter, switches, gages, Control Valve, Thermocouple, RTD, vibration, speed, positioner, LVDT, Level, position, calorie meter, CEMS, emissions. Bachelor's degree (BS) in Engineering from four-year college or university; and at least three (3) years related experience and/or training; or equivalent combination of education and experience in specific I&C disciplines as applicable to power plants.
Constellation Energy
$118800 - $132000
Freedom, PA
We are seeking a skilled and motivated Electrical Engineer with a strong background in high voltage transmission power, substation design, data center primary power infrastructure, on-site power generation and distribution, as well as solar photovoltaic (PV) and battery storage systems. The ideal candidate will be responsible for designing, implementing, and maintaining reliable power solutions that support critical infrastructure and advanced energy systems.
Axelon Services Corporation
Greenville, SC
What you’ll bring (Basic Qualifications)Bachelor’s Degree, Associate’s Degree, or Machinist Apprentice graduate with 3 years of experience in dimensional inspection [OR] High School Degree w/6 years of experience in dimensional inspection. Initiate and lead process improvement projects to improve Safety, Quality, Delivery, and Cost related to CMM processes.
Axelon Services Corporation
Greenville, SC
Bachelors Degree in Mechanical or Materials Engineering, Materials Science, or related engineering field of study from an accredited college or university. Support the development of new tooling and processes created by the AMRT in support of Gas Turbine Component Hardware Repair.
Axelon Services Corporation
Allentown, PA
Partner with Global Supply Chain (GSC) and collaborate cross-functionally to continuously drive improvements and disposition hardware non-conformances, while maintaining optimal quality for our customers. Relevant mechanical engineering experience designing gas turbine hardware or similar rotating machinery, specifically hot gas path components.
Axelon Services Corporation
Greenville, SC
Configure and calibrate critical machine parameters including air pressure, turntable RPM, nozzle distance/angles, and shot flow rates via MagnaValve controllers. Oversee shot classification and maintenance to ensure media meets fracture count and size distribution requirements for Cast Steel or Conditioned Cut Wire media.
Jobot
$250000 - $350000
Amarillo, TX
Operating at the intersection of energy, advanced computing, and sustainability, the company partners with top-tier technology, engineering, and industrial leaders to shape the future of how power is produced, coordinated, and optimized for large-scale applications — including next-generation artificial intelligence workloads. Cross-Disciplinary Collaboration — Partner with internal engineering teams, external technology partners, and regulatory bodies to design and deliver scalable, high-complexity solutions across a HyperGrid-scale campus.
Jobot
$120000 - $180000
Houston, TX
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Nesco Resource
$47.95 - $64.73
Chandler, AZ
A growing aerospace-focused manufacturing organization is seeking a Quality Product Engineer to support metrology processes, reduce variation in key process inputs, and strengthen overall quality systems. This role partners closely with Engineering and Production to ensure product conformity, customer compliance, and continuous improvement across the organization.
Axelon Services Corporation
Longmont, CO
Experience in Unit Control (Gas Turbine, Steam Turbine, Aero, Hydro, Nuclear), DCS, Generator (Excitation/Static Starters), Human Machine Interface (HMI), Cyber Products. Ensure accurate cost estimation including project risk management: (i) technical, (ii) execution, and (iii) commercial risks within the Inquiry to Order (ITO) process.
Axelon Services Corporation
Columbia, SC
Enhance overall function and quality of parts, reduce cost, and reduce defects in manufacturing. Proven experience demonstrating strong project management, teamwork, and communication skills.
Axelon Services Corporation
Greenville, SC
Perform post-processing exercises such as LCF crack initiation, LCF crack propagation, summarize bolted joint behavior, strength evaluations, etc. Working Hours: 40 hours per week, aligned to 1st shift Eastern Time Zone.
FootBridge
$75 - $85
Clarksville, TN
Assist with debugging and optimizing complex control logic associated with large air-cooled condenser systems, including load control and freeze protection logic. Work alongside the existing site DCS lead and GE turbine control teams to ensure proper integration between the Ovation system and the Mark VIe turbine controls.
Apollo Professional Solutions
$33.38 - $48.25
East Hartford, CT
In this role, you will be working with Technical Leads, Repair Design and Structures Engineering, Program Managers, Chiefs, Validation Engineering/ODA and ASE customers like component repair & MRO Shops as well as Airlines to ensure timely execution on assigned repair development projects. Required Skills: Senior Project Engineer - Turbine EngineKnowledge of gas turbine engine design, manufacturing, or repair .
Flux Resources LLC
Vancouver, WA
Flux Resources is seeking a Structural Engineer - Power & Industrial to join our clients team in Bothell, WA, to work on various Civil/Structural Engineer and Power Industry projects. Coordinate his/her design activities to maintain project schedules and ensure successful project completion and assist in site visits, estimating, and attending project meetings.
Conflux Systems, Inc.
$30
Houston, TX
The Electrical & Controls Assembly Technician supports the assembly, wiring, testing, and troubleshooting of electrical systems for rotating equipment packages, including gas turbines and compressors. Work with Motor Control Centers (MCCs), Fire & Gas systems, generator control systems, and vibration monitoring instrumentation.
NRG Energy, Inc.
$98480 - $162480
Princeton, NJ
Minimum of Baccalaureate Degree in appropriate Engineering discipline from an accredited college or university and 5 years of experience in steam or gas turbine equipment maintenance, operations, and troubleshooting. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing.
NRG Energy, Inc.
$98480 - $162480
Princeton, NJ
To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. + _Normal office environment and/or outside work environment (including working at heights, high/low ambient temperatures and high humidity areas at generating plants)_.
Blue Origin LLC
Seattle, WA
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Puget Sound Energy, Inc
Bellevue, WA
Puget Sound Energy's Generation Electrical & Controls (GEC) department is looking for an Electrical Engineer with experience in Industrial Processes and Controls, Protective Relaying, electrical maintenance, asset management or in closely related fields, to join our team. In addition, they will need to provide quick, professional responses to assist generating plant staff with troubleshooting operational problems on complex plant control systems as well as a variety of power generation equipment.
Enercon services Inc
$90000 - $177450
Kennewick, WA
Experience in one of the following industries required: engineering/design services, power generation, nuclear power, heavy industrial including chemical or pulp & paper, and government (DOE) projects. A typical day may include developing design studies, preparing engineering calculations & analysis, attending project meetings, performing a walkdown or mentoring junior employees.
Puget Sound Energy, Inc
Bothell, WA
In addition, they will need to provide quick, professional responses to assist generating plant staff with troubleshooting operational problems on complex plant control systems as well as a variety of power generation equipment. The field work typically ranges from 40-60 percent of the total depending upon assignments and takes place at the various PSE generating plant locationsmost within a three-hour drive from PSE's corporate offices.
VisionWorks Engineering
San Diego, CA
Utilize mechanical design and analysis techniques including stress analysis, dynamic, heat transfer, fracture mechanics and life prediction. VisionWorks Engineering, LLC is a product development focused engineering company based out of San Diego, California.
HireTalent
Indianapolis, IN
Strong technical knowledge in mechanical design methodologies and have an understanding of cross-discipline engineering concepts which include but are not limited to manufacturing engineering, aerodynamics, thermodynamics, thermal and mechanical analysis, cost engineering and product definition. - Enable through life Supply Chain Design and Lifecycle profitability for mature product fleets through the application and possibly creation of various mechanisms (non-conformance management, drawing alteration requests, repair instructions, engine manual limits and technical variants (TV)).
NRG Energy, Inc.
$98480 - $162480
Princeton, NJ
To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. + Normal office environment and/or outside work environment (including working at heights, high/low ambient temperatures and high humidity areas at generating plants).
Blue Origin LLC
Seattle, WA
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Skookum Educational Programs
Poulsbo, WA
Tesseraisseekinga skilled and safety-minded Stationary Engineer tooperate, maintain, and ensure the efficient performance of a wide range of Operations equipment, including pumps, compressors, generators, turbines, boilers, and related systems that provide essential services such as heat, air-conditioning, steam, and electricity. Access toafederal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID,in accordance withthe REAL ID Act.
Invenergy LLC
Olympia, WA
The scope of systems includes DCS and plant IT/OT platforms such as RTACs, RTUs, programmable logic controllers (PLCs), network switches, firewalls, annunciators, HMIs, and all associated connectivity supporting steam turbine, combined-cycle, simple-cycle gas turbine, and geothermal facilities. The role requires close coordination with multiple internal and external stakeholders to develop conceptual control system designs, manage procurement activities, and oversee detailed design, commissioning, and site acceptance testing through project completion.
GD Resources
Indianapolis, IN
Support manufacturing, supply chain and service activities: review supplier documentation, assess non-conforming hardware, manage change proposals, support production or field operations. Job Description: • Develop and deliver engineering solutions for gas turbine systems/sub-systems, including design definition, requirements capture, trade-off studies, and optimisation.
Kleinschmidt Associates
Redmond, WA
This position involves a combination of mechanical design tasks, typically dealing with unique design issues for fish passage projects, hydroelectric turbines, gates, trash rakes, and hydroelectric balance of plant retrofits and rehabilitation efforts at existing hydroelectric projects as well as the design of new power stations with a future in customer-facing consulting work. Knowledgeable: The successful candidate will have machine design experience preferably facility design in oil systems, cooling and filtration water systems, HVAC systems, or other hydraulic/ pneumatic machinery.
Puget Sound Energy, Inc
Bothell, WA
In addition, they will need to provide quick, professional responses to assist generating plant staff with troubleshooting operational problems on complex plant control systems as well as a variety of power generation equipment. The field work typically ranges from 40-60 percent of the total depending upon assignments and takes place at the various PSE generating plant locationsmost within a three-hour drive from PSE's corporate offices.
ANDRITZ Inc.
Spokane, WA
Duties: * Inspects parts, assemblies and finished products in accordance with contract and corporate specifications; follow company's inspection guidelines to conduct visual, dimensional, mechanical, electrical test and functional inspections on a wide variety of components, assemblies, equipment, systems, supplies and materials in the US and abroad. * Apply knowledge of Plant Quality Assurance methodologies and NDT methods for input to design reviews, failure analysis, quality program plans and construction documentation.
TransCanada
Spokane, WA
Our Compression / BOP Team is evolving to meet the needs of our growing business and we are seeking a Reliability Engineer or Maintenance Lead who has knowledge and experience to provide technical expertise and consultation to optimize the repairs and maintenance of TC Energy's compression fleet and provide technical support to assure optimum efficiency and equipment reliability in the pipeline system. Provide direction in necessary repair methods upon findings from a variety of electronic testing equipment to achieve optimum performance of engine and compressor equipment such as: laser alignment equipment to align motors, pumps, engines, compressors and turbines.
Primus International LLC
Woodinville, WA
Primary Duties & Responsibilities: Supports the Vice President of Quality in achieving Zero Defects across all Aero Sites by improving internal site processes, driving strategic initiatives and ensuring continued compliance through product/process audits, in addition to other strategies employed. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.
Primus International LLC
Algona, WA
is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.
Blue Origin LLC
Seattle, WA
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Honeywell
Columbus, OH
Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.
Honeywell
Austin, TX
Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.
Honeywell
El Paso, TX
Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.
Belcan
$70000 - $90000
Lynn, MA
The ideal candidate will work across mission analysis, engine modeling, control‑system interactions, and operability evaluations to ensure engines meet safety, performance, and reliability requirements across the entire operating envelopeKey Responsibilities: NPSS Steady State Cycle Model Supporto Develop, modify, and maintain NPSS‑based cycle models.o Required Qualifications: Bachelor"s degree in Aerospace Engineering, Mechanical Engineering, or related field. 2+ years of experience in gas turbine performance, propulsion modeling, aero‑thermal analysis, or similar discipline.