NewElectrical Engineer Certon SoftwareElectrical EngineerMelbourne, FLQualificationsBachelor's Degree (EE, CE or CS); Master's Degree preferredAt least 3 years experience in the design, development and qualification of aerospace electronicsMUST know data communications protocols. CERTON is dedicated to providing the most efficient, high quality solutions to our customers for safety critical systems certified under the guidelines of DO- 178B Software and DO-254 HardwareCertifications.
Senior Civil Engineer Tesla Laboratories. Inc.Senior Civil EngineerMerritt Island, FLAbout the Company Tesla Laboratories is a Service-Disabled Veteran Owned Small Business (SDVOSB) providing Cyber Security, Intelligence Analysis, Financial Management, Facilities Engineering Services, and Program Management support to the Intelligence Community (IC), the Department of Defense (DoD), and other federal government customers. · Experience in design of infrastructure and facilities projects, including but not limited to utilities design, site development, paving, grading, drainage, and stormwater design/modeling.
Operations Mechanical Engineer - Main Propulsion Systems/Engines Amentum Services IncOperations Mechanical Engineer - Main Propulsion Systems/EnginesFLThese tasks will support the International Space Station, Ground Systems Development and Operations, and the Space Launch System, Orion Multi-Purpose Crew Vehicle, and Launch Services programs. The COMET contract provides overall management and implementation of ground systems capabilities, flight hardware processing, and launch operations at NASA''s Kennedy Space Center (KSC) in Florida.
Test Engineer (TS/SCI) Maxar Technologies Inc (Inactive)Test Engineer (TS/SCI)Melbourne, FL$90,000–$120,000 / yearVantor is a place for problem solvers, changemakers, and go-getters-where people are working together to help our customers see the world differently, and in doing so, be seen differently. As an industry-leading earth observation satellite imagery provider, Vantor unlocks the promise of space to help governments and businesses solve problems on Earth and beyond.
Customer Service Engineer Worldwide TechServices OpenCustomer Service EngineerMelbourne, FloridaPerforms basic and moderately complex troubleshooting and repair activities, typically associated in an end-user environment, including but not limited to PC’s, desktops, laptops, tablets and printers. The Customer Service Engineer - is an intermediate position that performs tasks related to the repair of a variety of technology-based products typically associated in an end-user computing environment.
Launch Operations Mechanical Engineer Lead AST SpaceMobileLaunch Operations Mechanical Engineer LeadTitusville, FloridaThis role provides technical authority and execution leadership throughout the launch campaign, ensuring mechanical readiness, risk mitigation, and flawless execution for flight hardware and Mechanical Ground Support Equipment (MGSE). The Lead serves as the primary on-site mechanical authority, bridging design, manufacturing, and launch operations while mentoring engineers and coordinating across internal and external partners to ensure mission success.
Senior Specialist, Systems Engineering - Reliability Engineer L3Harris Technologies IncSenior Specialist, Systems Engineering - Reliability EngineerMalabar, FLSkilled in failure analysis and problem-solving methods and the tools needed in solving wide ranging and diverse failure issues (electrical, mechanical, material, component, test) and determining their reliability-related impacts. Preferred Additional Skills: Experience in production tests including Environment Stress Screening (ESS) and troubleshooting temperature related failures is a plus.
Specialist, Reliability Engineer L3Harris Technologies IncSpecialist, Reliability EngineerFLSkilled in failure analysis and problem-solving methods and the tools needed in solving wide ranging and diverse failure issues (electrical, mechanical, material, component, test) and determining their reliability-related impacts. Preferred Additional Skills: Experience in production tests including Environment Stress Screening (ESS) and troubleshooting temperature related failures is a plus.
Sr. IT Network Automation Engineer Space Exploration Technologies CorpSr. IT Network Automation EngineerCape Canaveral, FLBASIC QUALIFICATIONS: Bachelor''s degree in computer science, engineering, math, or science discipline and 5+ years of network automation, DevOps, network engineering, or site reliability engineering experience OR 8+ years of experience in network automation. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Senior Thermal Engineer Mainstream Engineering CorporationSenior Thermal EngineerRockledge, FLOur group of thermal engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacture. Systems we design are specifically tuned for the customers' needs and ranges from single-phase pumped loops, vapor compression and other lifting cycles, and radiation thermal management.
NewAssociate Semiconductor Failure Analysis Engineer RenesasAssociate Semiconductor Failure Analysis EngineerPalm Bay, FLYou will collaborate with experienced engineers to analyze, root cause, and report on semiconductor products using optical and electron microscopy tools. The ideal candidate is an Electrical Engineering graduate with strong communication skills and a proactive mindset; US citizenship#J-18808-Ljbffr.
NewSenior Power Management Failure Analysis Engineer RenesasSenior Power Management Failure Analysis EngineerPalm Bay, FLThe ideal candidate will have 10-15 years of experience, a degree in electrical engineering, and skills in various semiconductor fabrication and analysis techniques. The role involves failure analysis of semiconductor products, particularly in Power Management, for Artificial Intelligence applications.
NewPrincipal Failure Analysis Engineer RenesasPrincipal Failure Analysis EngineerPalm Bay, FLQualifications10-15 years' experience in semiconductor device failure analysis and/or equivalentBachelor's or master's degree in electrical engineeringFailure analysis experience with Power Management productsExperience with electrical isolation and physical failure analysis techniquesStrong understanding of diodes and transistors work. Job DescriptionOur Failure Analysis Team is looking for a Principal Failure Analysis Engineer in our Palm Bay, Florida office with failure analysis experience in Power Management to help the growing demand and support for power requirement with Artificial Intelligence.
NewSenior Failure Analysis Engineer, Power Management (AI) RenesasSenior Failure Analysis Engineer, Power Management (AI)Palm Bay, FLThe candidate will focus on analyzing semiconductor products, especially in Power Management, to support increasing demands. Strong interpersonal skills and experience with failure analysis techniques are essential for this role.#J-18808-Ljbffr.
Principal Emc/Emi Engineer I CesiumAstroPrincipal Emc/Emi Engineer IMelbourne, FLPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. You will work closely with cross-functional teams, including design, test, and systems engineering, to develop, analyze, and implement EMI/EMC control strategies that ensure the integrity and performance of our products in harsh environments.
Mechanical Engineer BRPHMechanical EngineerMelbourne, FLBRPH is a technically focused, creative architecture, engineering, and construction company with over six decades of expertise in helping mission-driven clients in the aerospace, defense, manufacturing, commercial, education, entertainment, hospitality, and federal markets identify gaps in their program delivery and develop innovative solutions to their most challenging problems across the U.S. and around the world. Demonstrates practical experience designing HVAC and mechanical systems, including load calculations, equipment selection and sizing, ductwork and piping design, controls coordination, and application of applicable mechanical, energy, and ventilation codes.
Test Engineer - Electronics - Melbourne, FL Michael Page InternationalTest Engineer - Electronics - Melbourne, FLMelbourne, Florida$90,000–$110,000 / yearFull timeThe Successful ApplicantIdeal Candidate:Bachelor's degree in Electrical Engineering, Electronics Engineering, Computer Science, or related field (or equivalent experience).2+ years of test engineering experience within an electronics manufacturing environment. Job SummarySector: Engineering & ManufacturingSub Sector: Engineering Design and R&DIndustry: Industrial / ManufacturingWhere: MelbourneContract Type: PermanentConsultant Name: Josephine BelcherJob Reference: JN-062026-7052276
Launch Operations Mechanical Engineer Lead AST & Science LLCLaunch Operations Mechanical Engineer LeadCape Canaveral, FLTechnology Stack:CAD Tools: AutoDesk Inventor (preferred), SolidWorks, NX, CreoAnalysis Tools: Finite Element Analysis (FEA) experience preferredData/Documentation Systems: Fusion or equivalent PDM/PLM toolsGeneral Tools: Microsoft Office SuitePhysical Requirements:Hands-on work with flight hardware, test setups, and precision instruments. This role provides technical authority and execution leadership throughout the launch campaign, ensuring mechanical readiness, risk mitigation, and flawless execution for flight hardware and Mechanical Ground Support Equipment (MGSE).
IT Operations Engineer Stoke SpaceIT Operations EngineerCape Canaveral, FL$89,040–$133,560 / yearYou will support everything from computers, printers, phones, applications, peripherals, and user access issues to complex troubleshooting of workstations, conference rooms, network connectivity, operational systems, and technical infrastructure. We are a small and motivated team, and as an IT Operations Engineer on Stoke Space's Information Technology team, you'll play a key role in supporting our Launch Complex and Launch Control Center at Cape Canaveral Space Force Station.
Sr. Launch Operations Engineer Space Exploration Technologies CorpSr. Launch Operations EngineerCape Canaveral, FLThey develop test requirements, develop launch plans, integrate the on-pad flight/test articles, perform on-console operation of the entire launch system, conduct tests, analyze data to confirm performance and inform the vehicle and ground design/production processes, and serve as the primary flight controllers for launch events. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Specialist, Electrical Engineer L3Harris Technologies IncSpecialist, Electrical EngineerPalm Bay, FLEssential Functions: Perform CCA Design specifying Mixed Signal Technology circuits consisting of A/D, D/A, Processors, I/O communication and Programmable Logic (FPGA, CPLD) circuits. Design including components such as TI DSP processors, Freescale or Intel Processors, Microcontrollers, FPGA, CPLD, and volatile/non-volatile memory (DDRx, SRAM, ROM, Flash…).
Civil Engineer BRPHCivil EngineerMelbourne, FLAbilities to include all general civil engineering design, including but not limited to: site planning, phasing, traffic/transportation systems for site design, master planning, demolition, erosion control, geometry, paving, grading, drainage, storm water, utilities, potable water, site fire, sanitary sewer, reclaimed water, lift stations, profiles, cross sections, details, a general knowledge of surveying & geotechnical principles, and coordination of all site utilities - power, site lighting, communications, gas, etc. BRPH is a technically focused, creative architecture, engineering, and construction company with over six decades of expertise in helping mission-driven clients in the aerospace, defense, manufacturing, commercial, education, entertainment, hospitality, and federal markets identify gaps in their program delivery and develop innovative solutions to their most challenging problems across the U.S. and around the world.
Sr. Facilities Engineer (IC3) Lockheed Martin CorpSr. Facilities Engineer (IC3)FLResponsibilities will also include working extensively in SAP software to ensure service orders, production orders, work orders, maintenance notes that capture problems or corrective action, and strategies are developed, released, dispositioned and closed. Must be able to navigate around equipment and facilities infrastructure aligning to the roles and responsibilities of this position, including climbing stairs, ladders, etc. in order to access the various areas/tooling/equipment required.
Design Engineer - Senior Lockheed Martin CorpDesign Engineer - SeniorCape Canaveral, FLDescription:The design team member will support design and construction of Weapons System Infrastructure & Capabilities (WSIC) projects to include major facility modifications, construction projects, and support equipment installation projects for the Trident II missile. Please note that this position does NOT support teleworking; the preferred candidate will be located near our Lockheed Martin Space facility in Cape Canaveral, FL, and will be expected to work in the office.
Mechanical Engineer, HVAC (Facilities) SpaceXMechanical Engineer, HVAC (Facilities)Cape Canaveral, FLTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Previous professional experience with system design, sizing, specification and installation of HVAC chillers, pumps, boilers, air handlers, heat pumps, HEPA filtration and building automation.
NewLaunch Fluids Engineer I Relativity SpaceLaunch Fluids Engineer ICape Canaveral, FL$90,000–$136,000 / yearDesign launch pad propellant and gas infrastructure, to include fluid system design, modeling, pipe stress analysis, fabrication drawings, process and instrumentation diagrams, component lists, and detailed work instructions. Demonstrated problem solving and critical thinking skills as well as demonstrated customer service excellence and ability to communicate highly effectively in verbal/written form with internal and external customers.
Senior Recovery Certification And Operations Engineer Relativity SpaceSenior Recovery Certification And Operations EngineerCape Canaveral, FL$116,500–$175,000 / yearRegulatory Coordination: Support Relativity's dockside and offshore operations by coordinating with applicable regulatory and certification organizations, including the U.S. Coast Guard (USCG), American Bureau of Shipping (ABS), U.S. Space Force (USSF), NASA, Federal Aviation Administration (FAA), and other applicable agencies. Cross-Functional Partnership: Build and maintain collaborative relationships with internal engineering teams and external regulatory and certification organizations to support long-term operational objectives and increased launch cadence.
Launch Fluids Engineer II Relativity SpaceLaunch Fluids Engineer IICape Canaveral, FL$104,000–$143,000 / yearDesign launch pad propellant and gas infrastructure, to include fluid system design, modeling, pipe stress analysis, fabrication drawings, process and instrumentation diagrams, component lists, and detailed work instructions. Demonstrated problem solving and critical thinking skills as well as demonstrated customer service excellence and ability to communicate highly effectively in verbal/written form with internal and external customers.
Senior Launch Fluids Engineer Relativity SpaceSenior Launch Fluids EngineerCape Canaveral, FL$124,000–$170,500 / yearDesign launch pad propellant and gas infrastructure, including fluid system design, modeling, pipe stress analysis, fabrication drawings, process and instrumentation diagrams, component lists, and detailed work instructions. Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.
Senior Systems Engineer - System Design Integration Lockheed Martin CorpSenior Systems Engineer - System Design IntegrationCape Canaveral, FLTo ensure that MSV testing needs are met with Sea Trial and Demonstration & Shakedown Operations (DASOs), the successful candidate will participate in various technical Working Groups that require integration for test data collection events to deliver required test data to support CMC MSV. The Common Missile Compartment (CMC) Program is looking for a highly motivated Systems Engineer to join a team of Systems Engineering and Integration Team (SEIT) members to contribute to various projects at various stages throughout the system lifecycle.
IT Operations Engineer Stoke Space TechnologiesIT Operations EngineerCape Canaveral, FL$89,040–$133,560 / yearYou will support everything from computers, printers, phones, applications, peripherals, and user access issues to complex troubleshooting of workstations, conference rooms, network connectivity, operational systems, and technical infrastructure. We are a small and motivated team, and as an IT Operations Engineer on Stoke Space's Information Technology team, you'll play a key role in supporting our Launch Complex and Launch Control Center at Cape Canaveral Space Force Station.
Manufacturing Engineer KalogonManufacturing EngineerMELBOURNE, FLProduct Improvement for Manufacturability - Design and implement product changes with a focus on rework rates, cost, and assembly time, utilizing direct feedback from production technicians and field feedback to validate improvements and surface further opportunities. - Manage analysis and disposition of units returned through the Return Authorization (RA) process, ensuring root cause is identified, findings are documented, and systemic corrective actions are driven when required.
Launch Operations Mechanical Engineer Lead AST Space MobileLaunch Operations Mechanical Engineer LeadTitusville, FLThis role provides technical authority and execution leadership throughout the launch campaign, ensuring mechanical readiness, risk mitigation, and flawless execution for flight hardware and Mechanical Ground Support Equipment (MGSE). The Lead serves as the primary on-site mechanical authority, bridging design, manufacturing, and launch operations while mentoring engineers and coordinating across internal and external partners to ensure mission success.
Sr. IT Network Automation Engineer Space Exploration TechnologiesSr. IT Network Automation EngineerCape Canaveral, FLBASIC QUALIFICATIONS: Bachelor's degree in computer science, engineering, math, or science discipline and 5+ years of network automation, DevOps, network engineering, or site reliability engineering experience OR 8+ years of experience in network automation. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Electronics Engineer Lockheed Martin CorpElectronics EngineerCape Canaveral, FLKey elements of the PLSSS program scope include satellite launch processing, satellite transport operations, satellite propellant loading operations, and satellite processing facilities O&M, clean room operations, and safety and environmental services. The candidate selected for this position will be assigned to the Electrical Engineering team and must have the ability to obtain a Top-Secret security clearance so they can work with teammates to accomplish the proper sustainment and operations of U.S. Government security systems supporting Launch processing activities.
NewAerospace Manufacturing Engineer Comcentric, Inc.Aerospace Manufacturing EngineerCocoa Beach, FloridaContractorDrive design for manufacture and assembly (DfMA) into designWhat we're looking for:Bachelor of Science in Mechanical, Manufacturing, Industrial, Electrical, Chemical, or Aerospace Engineering.7 or more years direct manufacturing and manufacturing engineering experience in Aerospace or related field. Lead efforts to identify, develop, and deploy designs and methodologies that improve operational excellence through quality, cost, design, and process improvements.
Launch Integration Engineer II Relativity SpaceLaunch Integration Engineer IICape Canaveral, FL$104,000–$156,000 / yearSupport first article builds in a fast-paced environment by focusing on repeatability and quality while developing scalable processes that enable a smooth transition to higher launch rates. Experience in fast-paced or lean environments, including collaboration with production and test sites, tool development, or leading small teams through complex build or test efforts.
Sr. Launch Operations Engineer Space Exploration TechnologiesSr. Launch Operations EngineerCape Canaveral, FLThey develop test requirements, develop launch plans, integrate the on-pad flight/test articles, perform on-console operation of the entire launch system, conduct tests, analyze data to confirm performance and inform the vehicle and ground design/production processes, and serve as the primary flight controllers for launch events. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Sr. Launch Operations Engineer SpaceXSr. Launch Operations EngineerCape Canaveral, FLThey develop test requirements, develop launch plans, integrate the on-pad flight/test articles, perform on-console operation of the entire launch system, conduct tests, analyze data to confirm performance and inform the vehicle and ground design/production processes, and serve as the primary flight controllers for launch events. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewManufacturing Engineer Lean Process & Quality Improvement KalogonManufacturing Engineer Lean Process & Quality ImprovementMelbourne, FLThe successful candidate will utilize Lean methodologies and Quality Management Systems to enhance operational efficiency and product quality. Kalogon is hiring for an on-site Engineering role in Melbourne, FL, focusing on product improvement and quality assurance within manufacturing processes.
Mechanical Engineer, HVAC Facilities Space Exploration Technologies CorpMechanical Engineer, HVAC FacilitiesCape Canaveral, FLITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Previous professional experience with system design, sizing, specification and installation of HVAC chillers, pumps, boilers, air handlers, heat pumps, HEPA filtration and building automation.
Field Service Engineer - Melbourne, FL Varian Medical Systems IncField Service Engineer - Melbourne, FLMelbourne, FL$50,210–$69,036 / yearIt is Siemens Healthineers' policy to comply fully and completely with all United States export control laws and regulations, including those implemented by the Department of Commerce through the Export Administration Regulations (EAR), by the Department of State through the International Traffic in Arms Regulations (ITAR), and by the Treasury Department through the Office of Foreign Assets Control (OFAC) sanctions regulations.". Be able to understand and utilize the escalation process to Sr FSR, Management, NTS, PSE, Applications Required Certifications and Training: Has completed all required VMS training classes for C3 products Has completed VMS HW Level II and Imaging Level II certification testing.
Project Engineer, Staff - Configuration Data Management Lockheed Martin CorpProject Engineer, Staff - Configuration Data ManagementTitusville, FL$104,500–$184,115 / yearSupports and process program design & change management production and development design information using LM Enterprise Product Data Management (EPDM) workflow, including the use and implementation of associated change objects such as Change Tasks (CTs), Change Requests (CRs), or Change Notices (CNs). Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115.
Supervisor Quality Engineering Embraer SASupervisor Quality EngineeringMelbourne, FLLeads Quality Engineering activities at MLB, driving quality performance, operational excellence, certification compliance, risk management, customer satisfaction, and reduction of Cost of Non-Quality throughout the product lifecycle. Monitors, reviews and coordinates compliance of Airworthiness Directives, Federal Aviation Regulations and manufacturer's service bulletins as applicable to airplane structures, systems, instruments, components, appliances, and engines and ensures compliance with.
Supervisor Quality Engineering EmbraerSupervisor Quality EngineeringMelbourne, FLLeads Quality Engineering activities at MLB, driving quality performance, operational excellence, certification compliance, risk management, customer satisfaction, and reduction of Cost of Non-Quality throughout the product lifecycle. Monitors, reviews and coordinates compliance of Airworthiness Directives, Federal Aviation Regulations and manufacturer's service bulletins as applicable to airplane structures, systems, instruments, components, appliances, and engines and ensures compliance with.