UNKNOWN

FEED

Ongoing support of equipment after full time production to include modifications for efficiency, capability and continuous improvement; Any issues that pertain to safety issues through troubleshooting and problem solving. This position will be primarily responsible for production floor support and process improvement for the machining of complex, tight tolerance components utilizing CNC controlled lathes, mills, and grinding equipment.

YEAR

BorgWarner
is a global technology leader in powertrain solutions. We focus on developing leading powertrain technologies that improve fuel economy, emissions and performance. Our facilities are located across the globe to provide local support for our diverse customer base.

 We operate in two groups: The Engine Group develops air management strategies and products to optimize engines for fuel efficiency, reduced emissions and enhanced performance. BorgWarner’s expertise includes engine timing systems, boosting systems, ignition systems, air and noise management, cooling and controls. The Drivetrain Group harnesses a legacy of more than 100 years as an industry innovator in transmission and all-wheel drive technology. The group leverages this understanding of powertrain clutching technology to develop interactive control systems and strategies for all types of torque management.
 Deciding where to work is a big decision. At BorgWarner, we manage talent as seriously as we manage our businesses. We encourage you to learn about our company’s proud history, strong culture, technology leadership and future vision. If you find that you share the BorgWarner Beliefs and thrive on job challenge, we invite you to explore the job opportunities available. That is the first step toward experiencing pride, passion, performance and potential with a career at BorgWarner.

BorgWarner Inc

Manufacturing Engineer Lead (Machining)

Ensure compliance and continuous improvement with safety, environmental, and regulatory requirements in all chemical process-related work, including, but not limited to, participation in process hazard analyses for hazardous processes, design of layers of protection barriers, auditing barriers, and development of preventive operating routines related to safety critical barriers. Synthomer is a leading supplier of high-performance, highly specialised polymers and ingredients that play vital roles in key sectors such as coatings, construction, adhesives, and health and protection - growing markets that serve billions of end users worldwide.

Synthomer

Process Engineer

ea_via_bold

Vision Engineer – Remote / Travel DISHER is currently partnering with a world leading automation company that specializes in groundbreaking technologies for flawlessly manufacturing millions of products. You will have opportunity for future training to broaden skills and be a part of a team of experts to drive solutions that improve efficiencies, safety, and quality.

DISHER

Vision Engineer

Position Overview: Apply principles and techniques of electrical engineering for the design and development of electrical equipment and systems including concept development, specification of electrical loads, hardware specification, control sequence development and controller programming. Working knowledge with: PLC, DCS, Line Drive System, power distribution, electronics, electro-magnetics; computer systems and programming, digital logic, and industrial instrumentation.

Fujifilm

Maintenance, Electrical Engineer

[AW]-iCims

Sealed Air designs and delivers packaging solutions that protect essential goods transported worldwide, preserve food, enable e-commerce and digital connectivity, and help create a global supply chain that is touchless, safer, less wasteful, and more resilient. This position is responsible for proactively troubleshooting and resolving issues with liquid packaging equipment, including installation, commissioning, configuration, rebuilding, preventive maintenance, and training.

Sealed Air Corp

Field Service Engineer (Duncan, SC, US, 29334)

ADAPTED_NOW

The GE Appliances philosophy, backed by three simple commitments defines the way we work, invent, create, do business, and serve our communities: _we come together_, _we always look for a better way_, and _we create possibilities_. GE Appliances participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. _If you are an individual with a disability and need assistance or an accommodation to use our website or to apply, please send an e-mail_ _to ask.recruiting@geappliances.com_.

GE Appliances, a Haier company

Senior Advanced Manufacturing Engineer

Sealed Air designs and delivers packaging solutions that protect essential goods transported worldwide, preserve food, enable e-commerce and digital connectivity, and help create a global supply chain that is touchless, safer, less wasteful, and more resilient. We strive to foster a caring, high-performance growth culture that will deliver consistent, sustainable profitable growth and accelerate our performance - a culture where accountability is clear and aligned, and where we reward business outcomes and impact.

Electrical Controls Engineer (Simpsonville, SC, US, 29681)

After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. What you'll do: The Manufacturing Controls Engineer is responsible for supporting plant leadership in achieving business and financial goals by developing and maintaining robust testing and assembly processes.

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit <a href="http://www.eaton.com/Eaton/index.htm" target="_blank">Eaton.com.</a>

Eaton Corporation

Controls Engineer

Assisting other engineers in developing and assembling scopes, drawings and specifications into a “package”, enabling electrical/instrumentation purchase inquiries to be issued for procurement of materials or subcontract pricing. Checking calculations made by other engineers to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practice.

Hargrove and Associates

Instrumentation Engineer IV

GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services.

GE Vernova Inc

Lead Manufacturing Engineer Fuel Nozzles New Make

Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Accredited four (4) year degree or global equivalent in engineering field of study and six (6) years of work-related experience; a recognized professional certification or registration in the applicable field, if required; some locations may have additional or different qualifications in order to comply with local requirements.

Fluor Corporation

Design Engineer III - Control Systems

Apply DoD systems engineering process, policy, and procedures in the acquisition, manufacturing, fielding, and sustainment, modernization and disposal of new, existing and future weapons systems and capabilities, with specific experience in weapon system Program Protection planning and anti-tamper methods. As a Senior Anti-Tamper Engineer specializing in systems engineering, you will be supporting the Special Programs Division, DoD Anti-Tamper (AT) Executive Agent Field Program Office (FPO) (AFLCMC/WAG-AT) at Wright Patterson AFB, OH.

Serco, Inc. is the North America division of Serco Group, plc, one of the world’s leading service companies. At Serco we serve every branch of the U.S. Military, federal, state and local governments, Canadian and provincial governments, as well as commercial customers. We are a leading provider of professional, technology, engineering, trades, and management services, and we support the public service areas of Defense, Citizen Services, and Transportation.
Headquartered in Herndon, Virginia, Serco has over 9,000 employees working at over 100 sites across the U.S. and Canada. Serco is a business where people and values matter. Our workplace culture is one that embraces diversity and fosters equity, respect, and belonging for every individual. Put simply, Serco is a place you can count on. We embody a holistic approach to wellbeing and offer our employees a suite of benefits that enable you to achieve your physical, emotional, financial, social, community and career goals.
Serco is a place where you can make a difference because every contribution matters. So while your place at Serco may vary depending on your role, we know you will find your place here. You are invited to come discover your place in our world.

Serco Group plc

Senior Systems Engineer

If you enjoy blending engineering know-how, software optimization, and project leadership to create impactful solutions, this is your opportunity to make a measurable difference while working on challenging and rewarding customer applications. Process & Machine Development- Develop and optimize machine tools and processes utilizing Laser Ablation, Laser Driling, and Electro-Discharge Machining (EDM), in addition to supporting future product and process development.

Winbro Group Technologies

Applications Engineer

Light to moderate lifting may be required for packages and other items, ability to walk short distances, may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, and keyboard. Job Summary : We are looking for an experienced and technically skilled Project Engineer with a strong background in industrial electronics, electrical and instrumentation (E&I) systems, and hands-on experience with Modicon PLCs.

Pinnacle Specialty Group, Inc.

Project Engineer

BreezyHR

Today, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. This role is responsible for programming, troubleshooting, maintaining, and continuously improving robotic painting applications, flame treatment processes, and related automation equipment.

OPmobility SE

ROBOTICS ENGINEER - PAINT

Today, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward.

BU INDUSTRIAL AUTOMATION ENGINEER

Working independently to troubleshoot and provide solutions to machine breakdowns, installation, commissioning, and on-going maintenance of Winbro equipment including machines, water plants, tooling, machine rebuilds and technology upgrades. The Maintenance, Build & Service Engineer will work with our customers (External and Internal) to ensure our products and systems provide maximum performance, improving productivity, reliability, and safety.

Maintenance, Build & Service Engineer

As a Senior Manufacturing Engineer working for the Manufacturing Engineering team at Itron in West Union, SC, you will lead the design, development, deployment, and optimization of manufacturing equipment and automated assembly systems to enable the profitable manufacturing of electricity meters, gas meters, network products, and battery-powered devices. Improve Overall Equipment Effectiveness (OEE), improve First Pass Yield (FPY), and reduce Scrap and Rework to reduce Total Manufacturing Cost (TMC) through analysis of equipment performance, downtime, cycle time, and failure modes, implementing sustainable corrective actions.

Itron Inc

Senior Manufacturing Engineer

Lead the design, development, validation, and implementation of test fixtures and test systems supporting service operations and New Product Development (NPD). Collaborate with Engineering, Quality, Operations, Supply Chain, Product Support, and other stakeholders to resolve technical issues and improve service readiness.

Milwaukee Tool

Advanced Quality Engineer

As a Senior Controls/Automation Engineer working for the Manufacturing Engineering team at Itron in West Union, SC, you will lead the design, development, deployment, and optimization of manufacturing equipment and automated assembly systems to enable the profitable manufacturing of electricity meters, gas meters, network products, and battery-powered devices. Improve Overall Equipment Effectiveness (OEE), improve First Pass Yield (FPY), and reduce Scrap and Rework to reduce Total Manufacturing Cost (TMC) through analysis of equipment performance, downtime, cycle time, and failure modes, implementing sustainable corrective actions.

Plc Engineer Jobs in South Carolina

Manufacturing Engineer Lead (Machining) BorgWarner Inc

Process Engineer Synthomer

Vision Engineer DISHER

Maintenance, Electrical Engineer Fujifilm

Field Service Engineer (Duncan, SC, US, 29334) Sealed Air Corp

Senior Advanced Manufacturing Engineer GE Appliances, a Haier company

Electrical Controls Engineer (Simpsonville, SC, US, 29681) Sealed Air Corp

Controls Engineer Eaton Corporation

Instrumentation Engineer IV Hargrove and Associates

Lead Manufacturing Engineer Fuel Nozzles New Make GE Vernova Inc

Design Engineer III - Control Systems Fluor Corporation

Senior Systems Engineer Serco Group plc

Applications Engineer Winbro Group Technologies

Project Engineer Pinnacle Specialty Group, Inc.

ROBOTICS ENGINEER - PAINT OPmobility SE

BU INDUSTRIAL AUTOMATION ENGINEER OPmobility SE

Maintenance, Build & Service Engineer Winbro Group Technologies

Senior Manufacturing Engineer Itron Inc

Advanced Quality Engineer Milwaukee Tool

Senior Controls/Automation Engineer Itron, Inc.

Similar Job Searches

Stand out to leading employers.