Embedded Firmware/Software Engineer Resonant SciencesEmbedded Firmware/Software EngineerDayton, OhioThe candidate will have an opportunity to be a member of a world-class team consisting of talented and dedicated engineers, technicians, and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies. DUTIES AND RESPONSIBILITIES: We are seeking an Embedded Software Engineer with experience in software design and development to work in a fast-paced RF laboratory designing, developing and testing custom RF embedded solutions.
RF Engineer Resonant SciencesRF EngineerDayton, OhioThe selected Engineer will have responsibility for and should have expertise in the following areas: Work with engineers experienced in RF measurement system design/testing, robotics, and software development to migrate capabilities from a lab environment to deliverable products. The candidate will have an opportunity to be a member of a world-class team consisting of talented and dedicated engineers, technicians, and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies.
Research Engineer Galois, Inc.Research EngineerDayton, OHWith clients including NASA, DARPA, AWS, and the DoW, we leverage our cutting-edge research to deliver high assurance solutions and tools that enhance security, reliability, and operational efficiency across sectors including aerospace & defense, healthcare, semiconductors, and fintech. Who We Are: From building digital engineering tools that make space exploration safer to verifying cryptographic libraries that protect some of the world’s most valuable data, Galois develops technology to guarantee the trustworthiness of systems where failure is unacceptable.
NewAdvanced Manufacturing Engineer SelectTech Services CorporationAdvanced Manufacturing EngineerSpringfield, OHThis position plays a critical role in supporting prototype development, low-rate production, and continuous process improvement while working closely with cross-functional Engineering and Manufacturing teams. What You'll Do Perform design engineering tasks in support of prototype and production hardware, including part design, design iteration, and design-for-manufacturability (DFM) improvements.
Reliability Engineer III Resilience Biotechnologies IncReliability Engineer IIIOH$85,000–$122,500 / yearWe're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge.
Systems Engineer (Radar/Electrical) - $5,000 Sign On Bonus AstrionSystems Engineer (Radar/Electrical) - $5,000 Sign On BonusDayton / Wright-Patterson AFB, OhioAssist ISR & SOF innovation activities in helping to achieve desired program & Directorate outcomes; better leverage resources; aligning activities across the ISR and SOF enterprise; drive a more innovative internal culture at every level; and build stronger, more effective partnerships with the DoD innovation community / defense industrial base. Apply Department of Defense (DoD) principles (DoD 5000.01, 5000.02) and United States Air Force (USAF), Headquarters Air Force Materiel Command (HQ AFMC), Air Force Life Cycle Management Center (AFLCMC) policies to engineering tasks, including data gathering, analysis, and acquisition expertise.
Automation Engineer Specialist Kendall Electric, Inc.Automation Engineer SpecialistDayton, OHCross-functional Skills: Ability to work well cross-functionally; provides excellent internal and external customer service; experience working in a sales department; self-motivated to learn new technologies and accomplish tasks when due; effective presentation skills in small and large group settings. Qualifications we prefer but don't require: Work Experience: 2 years of industrial distribution; hands-on electrical/mechanical experience; PLCs, HMIs, Networks, Safety, Motion Control, VFDs, and other automation equipment experience; understanding of manufacturing machinery, processes, networks, and analytics.
Hotel Engineer Home2 Suites by HiltonHotel EngineerCenterville, OH$16The Engineer will be responsible for maintaining the entire hotel facility, including the physical building structure, all mechanical, electrical, HVAC systems and related equipment, ensures the upkeep of guest areas to maintain an attractive hotel, manages all rehabilitation, expansion and special projects. Ideal candidate will have a solid understanding of all phases of hotel engineering - plumbing, electrical, HVAC, boiler maintenance, preventative maintenance, etc. and will be able to effectively delegate work and tasks to subordinates to ensure the smooth operation of the hotel.
NewQuality Engineer Reliance OneQuality EngineerSpringboro, OhioThis role will work closely with Engineering, Operations, Manufacturing, Logistics, suppliers, and customers to identify root causes, resolve nonconformances, reduce defects, and drive continuous improvement. This is an excellent opportunity for an experienced Quality Engineer who enjoys working hands-on in a manufacturing environment, solving complex quality challenges, and driving continuous improvement from development through production.
Associate NDE Research Engineer University of Dayton, OhioAssociate NDE Research EngineerDayton, OhioPosition Summary: The University of Dayton Research Institute (UDRI) – Structural Materials division is seeking a passionate and innovative Associate NDE Research Engineer to contribute to cutting-edge research in non-destructive evaluation (NDE) techniques. Preferred Qualifications: While not everyone may possess all of the preferred qualifications, the ideal candidate will bring many of the following: • ASNT Certifications in ultrasound, eddy current, radiography, fluorescent penetrant, magnetic particle, thermography.
Associate Process Engineer University of Dayton, OhioAssociate Process EngineerDayton, OhioR2) - Must meet R1 minimums in addition to: • BS in Engineering (Mechanical, Aerospace, Chemical, Materials, Industrial, or equivalent) and 3+ years of relevant experience OR MS in Engineering (Mechanical, Aerospace, Chemical, Materials, Industrial, or equivalent) and 2+ years of relevant experience OR in the absence of a degree, 7 years of direct, relevant work experience is required. This role will create CAD models and additive manufacturing build files to support material property development and/or product development processes and will create the associated manufacturing routers for processing builds.
NewManufacturing Engineer HartzellManufacturing EngineerPiqua, OHWe're seeking a results-driven Manufacturing Engineer to improve and develop production processes through data-driven analysis and hands-on collaboration. Act as a technical resource for resolving short-term production issues in collaboration with supervisors and team leaders.
Sr. Electronic Engineer Trimble IncSr. Electronic EngineerDayton, OH$115,600–$158,900 / yearField Systems: The Trimble Field Systems segment provides solutions to increase precision and productivity in construction tasks by empowering stakeholders to collect accurate information and manage conditions with cutting-edge technology. By combining Trimble's precision positioning technologies (like GNSS/GPS, lasers, optics, and sonics) with Caterpillar's heavy machinery expertise, CTCT builds software and hardware that automates and optimizes equipment operations.
Avionics Engineer B-2 Div (Wbz) 01.6.14/15 CredenceAvionics Engineer B-2 Div (Wbz) 01.6.14/15Wright-Patterson Air Force Base, OHMust have an ABET accredited Master’s or Doctorate Degree in a related field and ten (10) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; OR must have an ABET accredited Bachelor’s Degree in a related field and twelve (12) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; For engineering positions, must have successfully completed an undergraduate degree with a major in engineering from a college or university with an ABET-accredited engineering program for the degree requirements of the position, such as electrical, mechanical, or aerospace engineering. Assist in producing or reviewing technical evaluations/plans; engineering studies, reports, and analyses; acquisition strategies/plans; ICD; CDD; CONOPS; CPD; system requirements documents; system specifications; RFPs; SEP; TEMP; ISP; PPP; cybersecurity plans; security authorization package documentation; CCA compliance documentation; and other program, technical, and weapon system contractor-produced artifacts as required.
Avionics Engineer B-2 01.6.14/15 CredenceAvionics Engineer B-2 01.6.14/15Wright-Patterson Air Force Base, OHMust have an ABET accredited Master’s or Doctorate Degree in a related field and ten (10) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; OR must have an ABET accredited Bachelor’s Degree in a related field and twelve (12) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; For engineering positions, must have successfully completed an undergraduate degree with a major in engineering from a college or university with an ABET-accredited engineering program for the degree requirements of the position, such as electrical, mechanical, or aerospace engineering. Assist in producing or reviewing technical evaluations/plans; engineering studies, reports, and analyses; acquisition strategies/plans; ICD; CDD; CONOPS; CPD; system requirements documents; system specifications; RFPs; SEP; TEMP; ISP; PPP; cybersecurity plans; security authorization package documentation; CCA compliance documentation; and other program, technical, and weapon system contractor-produced artifacts as required.
Test Engineer Fecon IncTest EngineerLebanon, OHWe design, build, test, sell and service our equipment consisting of products such as our well-known "Bull Hog" mulchers, the Stump Ex, our high-quality FTX tractors of varying horsepower, as well as many other attachments. Job Summary: The Test Engineer is responsible for designing, developing, and executing test plans to ensure product performance, reliability, and quality.
PLC Controls Engineer - Industrial Robotics Automation Yaskawa Motoman Robotics CareerPLC Controls Engineer - Industrial Robotics AutomationMiamisburg, OhioDesigns and develops robotic systems electrically to meet customer specifications or project requirements including but not limited to bill of material creation, electrical drawing creation and other required project specific details. Work requires individual to devise own methods, to assist with methods used by others, to exercise ingenuity, to analyze situations, and apply judgment required to make decisions of an administrative and/or technical nature.
Senior PLC Controls Project Engineer Yaskawa Motoman Robotics CareerSenior PLC Controls Project EngineerMiamisburg, OhioWork requires individual to devise own methods, to assist with methods used by others, to exercise ingenuity, to analyze situations, and apply judgment required to make decisions of an administrative nature. • Provide technical support and leadership to customer, engineering team, customer service, sales, marketing, manufacturing, etc.• May assist in preparation of technical proposals with Application Engineer and/or Marketing.•
Systems Engineer, Sr - PR 1428 Explore Current OpeningsSystems Engineer, Sr - PR 1428Wright-Patterson AFB, OhioProvide specialized aircraft engineering support for programs such as C-17, Flight Systems, Structures, and UK Foreign Military Sales, including airworthiness, regulatory compliance, safety management, technical documentation, and coordination with U.S. and UK aviation authorities. Support specialized engineering disciplines including avionics, electrical, software, systems security, systems integration, flight systems, structures, communications/navigation, manufacturing, quality assurance, reliability, and maintainability.
Sr. Quality Engineer (Supplier Quality) Parker Hannifin CorpSr. Quality Engineer (Supplier Quality)Dayton, OHThe Supplier Quality Engineer is responsible for planning, coordinating, implementing, and improving processes to ensure that the quality of purchased items and supporting documents conforms to defined Parker Lord requirements and customer expectations, while minimizing the Parker Lord appraised costs. Experience in utilizing APQP tools including: Control Plans, FMEA''s, PPAP and the ability to effectively communicate advance quality concepts, plans and technical data internally and with external (customer or supplier) personnel at all levels.
Mobile Hvac/R Engineer JLLMobile Hvac/R EngineerDayton, OHIndividuals are expected to demonstrate technical expertise in HVAC and refrigeration and be multi skilled in electrical, HVAC, Piping/Plumbing, Material Handling Equipment and others in order to successfully complete daily/weekly work assignments. Maintain, operate, and repair all HVAC/R systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds, and production equipment as it pertains to assigned buildings.
Laser communications systems engineer Ravee Optics IncLaser communications systems engineerDAYTON, OH$150,000–$225,000We are seeking a highly motivated Senior Laser Optical Communications Engineer /Architect to lead the design, development, and testing of advanced free-space optical (FSO) communication systems. You will work at the intersection of photonics, laser systems, and space/airborne communications to build next-generation terminals for terrestrial, airborne, and space-based platforms.
Plant Engineer Crown HoldingsPlant EngineerDayton, OhioDemonstrated knowledge and experience with modern equipment maintenance (TPM), high-speed forming presses, electrical, chilled water systems, compressed air systems, building maintenance, wastewater treatment, printing presses and curing ovens. Reporting directly to the Plant Manager, the Plant Engineer responsibilities would include, but not be limited to, the following: Design, implement and maintain preventive as well as predictive maintenance programs.
Process Engineer (Aerospace Coatings) Hohman PlatingProcess Engineer (Aerospace Coatings)Dayton, OhioThe Process Engineer is responsible for utilizing sound engineering practices to troubleshoot and resolve process issues, acting as a process expert for internal and external customers and implementing systemic improvement efforts in order to enhance quality and reduce production costs. Troubleshoots and conducts root cause analysis of project, production and chemical bath process related issues to minimize production downtime; ensures the Production Manager is kept abreast of progress and aware of process changes.
FAA Reliability and Maintainability Engineer Senior Colsa CorporationFAA Reliability and Maintainability Engineer SeniorDayton, OHAssist in providing support to produce or review products that include the following: technical evaluations/plans; engineering studies, reports, and analyses; and acquisition strategies/plans such as: ICD; Operational Requirements Document (ORD)/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); Test Acceptance Procedures (ATPs); Program Environment, Safety, and Occupational Health Evaluation (PESHE); information support plan; PPP; Technology Assessment/Control Plan (TA/CP); emerging technology assessments and Technology Transition Plans (TTPs); Information Assurance Strategy (IAS); Security Classification Guide (SCG); Alternative Live Fire Test and Evaluation Plan; Clinger-Cohen Act (CCA) compliance; Consideration of Technology Issues; Data Management Strategy; Chemical, Biological, Radiological, and Nuclear (CBRN) Survivability Assessments; Net-Centric Data Strategy; Spectrum Supportability Determination; Technical Data Rights Strategy; Technology Readiness 3.5.1.2.7 Assessment (TRA); Manufacturing Readiness Assessment (MRA); and other program/technical documents as required. Assist with establishing, implementing, and adhering to LCSE processes to ensure OSS&E compliance is achieved and maintained and aid the Air Force in reviewing and updating the OSS&E baseline document and shall support the Air Force in the identification of OSS&E elements, progress reporting of OSS&E metrics, and interaction with other organizations to ensure continued OSS&E compliance.
Systems Integration Engineer, Senior COLSA CorporationSystems Integration Engineer, SeniorDayton, OHFull timeAssist in translating user requirements into system requirements, which will be used to design, develop, fabricate, test and evaluate systems, subsystems, and equipment for deployment and in providing support to produce or review products that include the following: technical evaluations/plans; engineering studies, reports, and analyses; and acquisition strategies/plans such as: ICD; Operational Requirements Document (ORD)/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); Test Acceptance Procedures (ATPs); Program Environment, Safety, and Occupational Health Evaluation (PESHE); information support plan; PPP; Technology Assessment/Control Plan (TA/CP); emerging technology assessments and Technology Transition Plans (TTPs); Information Assurance Strategy (IAS); Security Classification Guide (SCG); Alternative Live Fire Test and Evaluation Plan; Clinger-Cohen Act (CCA) compliance; Consideration of Technology Issues; Data Management Strategy; Chemical, Biological, Radiological, and Nuclear (CBRN) Survivability Assessments; Net-Centric Data Strategy; Spectrum Supportability Determination; Technical Data Rights Strategy; Technology Readiness 3.5.1.2.7 Assessment (TRA); Manufacturing Readiness Assessment (MRA); and other program/technical documents as required. Review and assist in performing assessments on program specific databases, analyzing BIT failure reports, and comparing failure reports against the BIT interpreter analyzer for accuracy of BIT indications; provide system integration guidance to aircraft program offices for the program system installation and system maintenance; review and analyze technical proposals or modifications for design feasibility and system capability; assist in conducting performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies; and conducting systems analyses to including but not limited to system design/design feasibility and state-of-the-art assessments.
Systems Integration Engineer Senior Colsa CorporationSystems Integration Engineer SeniorDayton, OHAssist in translating user requirements into system requirements, which will be used to design, develop, fabricate, test and evaluate systems, subsystems, and equipment for deployment and in providing support to produce or review products that include the following: technical evaluations/plans; engineering studies, reports, and analyses; and acquisition strategies/plans such as: ICD; Operational Requirements Document (ORD)/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); Test Acceptance Procedures (ATPs); Program Environment, Safety, and Occupational Health Evaluation (PESHE); information support plan; PPP; Technology Assessment/Control Plan (TA/CP); emerging technology assessments and Technology Transition Plans (TTPs); Information Assurance Strategy (IAS); Security Classification Guide (SCG); Alternative Live Fire Test and Evaluation Plan; Clinger-Cohen Act (CCA) compliance; Consideration of Technology Issues; Data Management Strategy; Chemical, Biological, Radiological, and Nuclear (CBRN) Survivability Assessments; Net-Centric Data Strategy; Spectrum Supportability Determination; Technical Data Rights Strategy; Technology Readiness 3.5.1.2.7 Assessment (TRA); Manufacturing Readiness Assessment (MRA); and other program/technical documents as required. Review and assist in performing assessments on program specific databases, analyzing BIT failure reports, and comparing failure reports against the BIT interpreter analyzer for accuracy of BIT indications; provide system integration guidance to aircraft program offices for the program system installation and system maintenance; review and analyze technical proposals or modifications for design feasibility and system capability; assist in conducting performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies; and conducting systems analyses to including but not limited to system design/design feasibility and state-of-the-art assessments.
Packaging Engineer III Gray IncPackaging Engineer IIIMason, OHSupport the technical lead on all aspects of packaging systems design and integration development including line and equipment speed analysis, pack out matrix, block flow and general arrangement layout drawings, equipment lists, utility demand matrices, procurement specifications/approvals. Experience in large capital project engineering/management, specifically in detailed packaging system design, preferably related to food and beverage processing lines or related transferable expertise.
IT Systems Engineer (Hybrid - Cloud & On-Prem) SilfexIT Systems Engineer (Hybrid - Cloud & On-Prem)Springfield, OhioSilfex Inc., A Lam Research Company is the leading provider of precision silicon components used to make and operate semiconductor tools, which enable the trillion-dollar global electronics industry. At Silfex, we are the leading provider of precision silicon components used to make and operate semiconductor tools, which enable the trillion-dollar global electronics industry.
Chemical Systems Quality Engineer Hohman PlatingChemical Systems Quality EngineerDayton, OhioThe Chemical Systems Quality Engineer leads continuous improvement of laboratory quality systems, investigates technical issues and deviations, and partners with Operations, Process Engineering, and Quality to maintain robust chemical control and testing processes. This role serves as the technical owner for laboratory and testing equipment, ensuring measurement systems remain accurate, compliant, and capable of supporting production requirements.
Manufacturing Engineer AM GeneralManufacturing EngineerFranklin, OhioManual Dexterity: must be able to regularly make quick, accurate, skillful, and coordinated movement with hands and arms to grasp, place, move, or use objects such as phone, computer, and other office equipment, tools, or controls. Methodical approach: Production lines follow a set process, so this position needs a methodical approach to ensure all tasks are completed in the correct order for a smooth-running production line.
SR R&D/PRODUCT DVL ENGINEER TE Connectivity plcSR R&D/PRODUCT DVL ENGINEERMiddletown, OHWork closely with the customer and TE Product Managers, Sales, Field Application Engineers in getting the right and clear VOC (Voice of Customer) and convert to a TE design conceptualization and preliminary product specification. • 8 years of relevant mechanical engineering work experience with electrical components, electrical devices, mechanical structure design, manufacturing tooling development, stamping, molding, assembly, plating, or manufacturing process development.
Process Engineer SilfexProcess EngineerSpringfield, OhioBachelor’s degree with 5 years of experience, or a Master’s degree with 3 years of experience, in Mechanical, Manufacturing, Industrial Engineering, or a related field, with hands‑on experience in a manufacturing environment, preferably machining or CNC operations. Silfex Inc., A Lam Research Company is the leading provider of precision silicon components used to make and operate semiconductor tools, which enable the trillion-dollar global electronics industry.
Forward Deployed Engineer Machina Labs IncForward Deployed EngineerDayton, OH$115,000–$145,000 / yearYou will serve as the primary interface between the customer and Machina's engineering teams, translating real-world production challenges into actionable feedback for our Product, Hardware, Software, and Process Engineering groups, and bringing solutions back to the factory floor. About the Role: As a Forward Deployed Engineer at Machina Labs, you are our "boots on the ground", the dedicated technical lead embedded at customer sites to ensure our RoboCraftsman systems perform as designed in real-world manufacturing environments.
Weld Engineer Rittal LLCWeld EngineerUrbana, OHFull timeRelationship : Direct Contacts: Vice President of Operations, Manufacturing Engineering Manager, Manufacturing Engineering Coordinator, Manufacturing Engineering team members, Maintenance, Managers, Supervisors, Team Leaders, internal and external vendors and customers. We design and manufacture the world’s leading industrial and IT enclosures, racks, and accessories, including high-efficiency, high-density power management, and climate control systems for industrial, data center, outdoor, and hybrid applications.
Electrical Engineer Actalent IncElectrical EngineerMoraine, OH$80,000–$110,000 / hourWe are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service. The role involves collaboration with engineering, production, and technical services teams, as well as time spent on the shop floor and in control panels during installation, commissioning, and troubleshooting activities.
Systems Engineer Resonant SciencesSystems EngineerDayton, OhioThe selected Systems Engineer will have responsibility for the following areas: Apply Model-Based Systems Engineering (MBSE) methodologies to develop and maintain system architecture, operational concepts, requirements decomposition, interface definitions, and verification traceability throughout the program lifecycle. The candidate will have an opportunity to be a member of a world-class team consisting of talented and dedicated engineers, technicians, and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies.
NewOSP Engineer Pearce ServicesOSP EngineerKings Mills, OH$36–$38 / hourPearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm.
Sustaining Engineer Dover CorporationSustaining EngineerHamilton, OHThis role will collaborate with multiple engineering teams along with onsite operations teams to solve manufacturing and quality issues, implement enhancements and productivity savings on existing products, and assist with new product development initiatives. Strong data-driven problem-solving background, including the ability to conduct analyses, identify root causes, develop corrective actions, and verify effective closure and removal of issues in manufacturing environments.
NewEngineering/Technical - Quality Assurance Engineer III MindlanceEngineering/Technical - Quality Assurance Engineer IIIFairfield, OHThis position is ideal for an engineer with approximately 1 to 5 years of experience in manufacturing, quality, industrial engineering, or a related field who wants to grow their technical skills while working closely with production, engineering, and supply chain teams. You will be responsible for identifying quality issues, driving corrective actions, supporting production teams, and leading continuous improvement projects that improve customer satisfaction and manufacturing performance.
Cooling Systems Engineer I Schneider Electric USA, IncCooling Systems Engineer IFairfield, OHFull timeWe ensure you feel secure with benefits that help you and your family thrive: medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks, flexible work arrangements, paid family leaves, well-being programs, 12 holidays per year, and 15 days of paid time off per year. Design and Review: Oversee and design mechanical cooling systems to meet customer requirements, focusing on: Cooling Calculations: Perform heat load, cooling capacity, airflow, ventilation, humidity control, and pPUE calculations.
Maintenance Engineer Ocado GroupMaintenance EngineerMonroe, OhioWe provide services to partner clients globally via our innovative advanced robotics technology, known as the Ocado Smart Platform ("OSP"), this drives our highly automated, multi-million dollar Customer Fulfillment Centers (CFCs). As a Maintenance Engineer will provide first response to engineering fault conditions, both reactive and planned maintenance activities as well as being involved in continuous improvement projects within our start of the art, automated Customer Fulfillment Center (CFC).
Electrical Application Engineer Actalent IncElectrical Application EngineerSpringfield, OH$60,000–$80,000 / yearWe are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service. We are seeking an Application Engineer to support the creation and maintenance of production work orders, Bills of Material (BOMs), and product configurations for a growing engineering team.
Automation Simulation Engineer MakinoAutomation Simulation EngineerMason, OhioEducation and Experience Associate or Bachelor degree in Mechanical Engineering, Mechatronics Engineering, Electrical Engineering, Automation Engineering, Robotics Engineering, Manufacturing Engineering, or a related technical discipline. In this role, you will work alongside experienced engineers to create virtual models and simulations that help customers visualize automation concepts, evaluate system performance, and support the transition from proposal to production.
Application Engineer - Springfield, OH Konecranes PlcApplication Engineer - Springfield, OHSpringfield, OHWe consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. The Application Engineer is responsible for providing Production with consistent and accurate work orders, using variant configuration and super BOM tools.
Manufacturing Engineer United Performance Metals, LLCManufacturing EngineerHamilton, OHPart timeDevelops and implements manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods, equipment, and new technologies; conferring with equipment vendors. Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.
Manufacturing Engineer O'Neal Industries IncManufacturing EngineerHamilton, OHMANUFACTURING PROCESSES DUTIES: Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators. Develops and implements manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods, equipment, and new technologies; conferring with equipment vendors.
Application Engineer FreudenbergApplication EngineerTroy, OhioResponsibilities: Apply engineering expertise to support sealing solutions across static and dynamic applications, including O-rings and emerging electrification/eMobility technologies. Act as a technical partner to assigned customers—promoting solutions, identifying conversion opportunities, and delivering product training and application expertise.
Manufacturing Quality Engineer - Transformation Schneider Electric SEManufacturing Quality Engineer - TransformationFairfield, OHIn charge of the Quality of one or several sectors • Ensure that the Process Control Plan is applied and consistent with Failure Mode Effect Analysis (FMEA) • Challenge supervisors to identify and manage risks in a preventive mode • Be the local expert of the traceability system for the manufacturing floor • Lead Process Audits and Process FMEAs • Create and maintain quality control documentation, ensure related training and application in the sector • Lead continuous improvement on its perimeter • Lead containment actions, root cause analysis of quality issue and problem solving on his sector • Be a member of the Short Interval Management (of the production lines) • Provide solutions to increase Customer Satisfaction • Provide input and challenges about quality for new evolution, contribute to process/control capability implementation. This involves •The Quality Excellence of the Offers delivered to the customers •The Quality Excellence of Supply Chain (from Supplier to Customers) •The timely and effective management of customer containment actions (Business Risk Escalation, Offer Safety Alerts etc.) There will be up to 15% travel during the first 9-12 months to support product line relocation and project execution activities.
FMS Manufacturing Engineer Axient LLCFMS Manufacturing EngineerDayton, OHThe Directorate executes a $22 billion acquisition portfolio developing, producing, testing, modifying, fielding, and supporting Air Force ISR and SOF platforms, and related sub-systems. Required Qualifications: Bachelor's degree or master's degree in a engineering field (ABET accredited) and at least 3 years of experience in the respective technical/profession discipline being performed, 3 years of which must be in the DoD.