PERMANENT

FEED

UNKNOWN

Perform planned maintenance and unplanned repairs of production line equipment that includes copper electroplating, chemical etching, ultrapure process water treatment, solder mask printing, automated laser and mechanical drilling, PCB layup and lamination, and/or plasma etching systems. Perform planned maintenance and unplanned repairs of production line assets that includes SMT line equipment, epoxy dispensing printers, conveyor systems, thermal chambers, test reliability chambers, and vacuum systems.

SpaceX

PLP/SiP Maintenance Technician (Starlink)

greenhouse_via_bold

This includes but not limited to installation and support of the layer 1 fiber and copper data network cabling infrastructure, support of mission video, ground-side vehicle and payload interface systems, ground stations, telemetry and optical tracking systems, marine communications, readiness testing, and other systems involved in real-time communications and operations for Falcon, Dragon, Starship and other missions. Operational knowledge of oscilloscopes and multi-meters, soldering wires and connectors, various crimping tools, wire stripping techniques, Ohm's law, continuity testing, pinning out a military type connector, routing and tie wrapping cables, drilling and tapping holes, and building junction boxes.

Space Exploration Technologies

Supervisor, IT Network Infrastructure - 1St Shift

ea_via_bold

FULL_TIME

Able to carry 50 pounds up and down stairsFrequent standing, kneeling/squatting, bending/ stooping, pushing/pulling, and twistingFrequent walking, climbing stairs/ladder/scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent drivingWork outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, insects, dust, toxic chemicals and fumes, noise, vibration, and electrical hazards; workaround gas lines; work around machinery with moving parts; may work in tight or enclosed spaces; may work alone; may work irregular hoursThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Cleans and makes adjustments of Variable Frequency DrivesRepairs piping systems made of PVC, black iron, and braze/solder copper pipe by means of both soft and silver solder methods.

 Founded in 1852 by the Society of Mary (Marianists), St. Mary's University is a Catholic and Marianist university with a tradition of academic excellence and integrating liberal arts with professional studies. St. Mary’s serves a diverse student population through its humanities, sciences and business schools, with many options to pursue graduate studies and joint degrees. St. Mary’s is also home to San Antonio’s only law school. 

St. Mary's University

HVAC Technician II

Talent Acquisition

We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Production Test Technician (Starlink)

You're a fast learner, a team player, and a self-starter who enjoys solving complex problems and working hands-on with technology. Experience soldering precision components and confidently using tools such as oscilloscopes, multimeters, soldering irons, and hot air stations.

Bitdeer

Repair Technician (Mining Data Center - Rockdale TX)

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Person," defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, or (iii) other protected individual, such as a refugee under 8 U.S.C. § 1157 or asylee under 8 U.S.C. § 1158; or 2) being eligible to obtain a timely export control license or license exception from the applicable U.S. federal agency.

Sanmina Corp

SMT Process Engineering Technician

These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.​. Ability to read, write, and speak the English language at a level that allows for the comprehension of detailed work and safety instructions and the legible completion of required paperwork.

Teledyne Technologies

Cable Assembly Technician

You will be the technical backbone of our critical water infrastructure, ensuring the reliability of Ultra-Pure Water (UPW), Industrial Wastewater (IWW), and Zero Liquid Discharge (ZLD) systems that support our manufacturing and testing operations. We need a hands-on problem solver who can troubleshoot a PLC panel in the morning, calibrate sensitive chemical analyzers in the afternoon, and help redesign a control loop before the end of the day.

Instrumentation & Controls Technician, Water Treatment (Starlink)

Process Engineering Technician

Firefly Avionics Production Technicians – Afternoons work closely with the Avionics and Integration teams in the design, build, integration, and test of fully functional space launch rockets, satellites, and landers. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Firefly Aerospace

Avionics Production Technician - Afternoons

clearcompany

At our growing Livermore site, we design and build sophisticated RF measurement systems and ultra -precise pressure, force, and calibration instrumentation for Aerospace an d Defense applications where performance and reliability are critical. Schematic literacy: Ability to read, interpret, and accurately follow complex schematics, wiring diagrams, and engineering layout blueprints.

Raptor Scientific LLC

Electrical Assembler

ESSENTIAL DUTIES AND RESPONSIBILITIES: Maintains, diagnoses, and repairs a variety of major appliances and related equipment in kitchens such as walk-in coolers, walk-in freezers, ice makers, ovens, food mixers, salad cutters, food carriers, compactors, electric ranges, dish-washers, scales, steamers, food fryers, steam kettles, steam tables, food warmers, softeners, and various other parts and components as necessary. Work outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, inclement weather, insects, dust, toxic chemicals and fumes, noise, vibration, and electrical hazards; work around gas lines; work around machinery with moving parts; may work in tight or enclosed spaces; may work alone; may work irregular hours.

Kitchen Equipment Repair Technician

Responsibilities: Repair & Maintenance: Perform board replacements, connector checks, wiring harness repairs, and assembly rework on electronic and low-voltage electrical systems. This position focuses on board-level and modular repairs without component soldering, emphasizing replacement, assembly rework, connector validation, and firmware updates.

Sol-Ark, LLC

Repair Technician

HiringThing

Diagnose and correct maintenance issues on Statement and Invoices Equipment, Mail Inserters, Cut Sheet Printers and Laser Printers. Additionally, you'll need to ensure the completion of your assigned maintenance work orders and regularly check the progress of your work throughout the facility.

<p>Fiserv (NASDAQ: FISV) is the leading global provider of information management and electronic commerce systems for the financial services industry.  Fiserv provides integrated technology and services that create value for our clients. Ranked No. 1 on the FinTech 100 international listing of top technology providers to the financial services industry for 6 of the last 7 years, Fiserv drives innovation that transforms experiences for more than 16,000 clients worldwide including banks, credit unions and thrifts, billers, mortgage lenders and leasing companies, brokerage and investment firms and other business clients.To learn more, visit us <a href="http://www.fiserv.com" target="_blank">www.fiserv.com</a>.</p>

Fiserv Inc

Maintenance Technician

HOUR

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://peaktechnical.com/privacy-policy/ and https://peaktechnical.com/ca-residents-privacy-rights/ . Basic computer proficiency, including data entry and navigating computer applications (e.g., MS Office and OLP system).

PEAK Technical Services Inc.

Technician A

jobdiva

OTHER

Mainboard Repair & Troubleshooting : Oversee the diagnostics, repair, and testing of mainboards for various types of electronics (e.g., computers, servers, mobile devices). The manager will also be involved in troubleshooting complex issues, managing workflows, and coordinating with other departments to ensure timely and cost-effective solutions.

Roth Staffing Companies

Electrical Mainboard Repair Manager

Broadbean

The Electronics Technician - ILI Systems & Equipment owns the full lifecycle of PIPECARE Western Hemisphere's electronics assets - bench-level preparation, testing, calibration, repair, and reliability support across the region's inspection technologies (Caliper, MFL, UTWM/UTCD, and EMAT), the tracking and locating equipment that supports every mobilization (AGM units, toolmounted transmitters, and pig locators) - together with management of the electronics store, tool inventory, consumables, and the component requisitioning that ties it all together. About PIPECARE Group: PIPECARE Group offers comprehensive In-Line Inspection Services to identify and size pipeline threats, Utilizing advanced technologies such as Magnetic Flux Leakage, Transverse Field Inspection, Ultrasound, and specialized tools, PIPECARE ensures precise detection and assessment of various pipeline anomalies.

PIPECARE Group

Electronics Technician - ILI Systems & Equipment. Houston-Based.

The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. For our government customers, AFO sustains mission readiness and ensures quality of life by maintaining high value assets and operations at peak performance and successfully manages these operations through accurately forecasting, managing, and aggressively controlling costs.

Akima, LLC

Electronics Technician Maintenance III (III Corps Small Arms)

[AW]-iCims

Qualifications: Required (Basic) Qualifications: Associates degree in Electronics from an accredited institution with at least 5 years of experience in engineering or similar experience or a Bachelor's degree in Electrical Engineering, Computer Engineering/Science, or a Technical discipline with two years of engineering experience. Eaton's Electrical division is currently seeking an Electrical Engineering Technician to join our team in Austin, TX to provide technical support for engineering teams in the development of new Eaton products and accessories!

YEAR

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit <a href="http://www.eaton.com/Eaton/index.htm" target="_blank">Eaton.com.</a>

Eaton Corporation

Electrical Engineering Technician

The Harness Manufacturing Engineer is responsible for developing, optimizing, and supporting the production of electrical harnesses and cable assemblies for Low Earth Orbit (LEO) satellite platforms. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected.

Inventory Specialist Jobs in Utah

PLP/SiP Maintenance Technician (Starlink) SpaceX

Supervisor, IT Network Infrastructure - 1St Shift Space Exploration Technologies

HVAC Technician II St. Mary's University

Production Test Technician (Starlink) SpaceX

Repair Technician (Mining Data Center - Rockdale TX) Bitdeer

SMT Process Engineering Technician Sanmina Corp

Cable Assembly Technician Teledyne Technologies

Instrumentation & Controls Technician, Water Treatment (Starlink) Space Exploration Technologies

Process Engineering Technician Sanmina Corp

Avionics Production Technician - Afternoons Firefly Aerospace

Electrical Assembler Raptor Scientific LLC

Kitchen Equipment Repair Technician St. Mary's University

Repair Technician Sol-Ark, LLC

Maintenance Technician Fiserv Inc

Technician A PEAK Technical Services Inc.

Electrical Mainboard Repair Manager Roth Staffing Companies

Electronics Technician - ILI Systems & Equipment. Houston-Based. PIPECARE Group

Electronics Technician Maintenance III (III Corps Small Arms) Akima, LLC

Electrical Engineering Technician Eaton Corporation

Harness Manufacturing Engineer - LEO Satellite Applications AST Space Mobile

Similar Job Searches

Stand out to leading employers.