UNKNOWN

FEED

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI)American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT).Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. NICET Level II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, GeneralistICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding.

Terracon Consultants Inc

Engineering Technician II

AdventHealth is a place where you can thrive professionally, and grow spiritually, by Extending the Healing Ministry of Christ. Key Responsibilities: The Engineering Technician demonstrates willingness to perform any required task to support medical center operations.

HOUR

AdventHealth

Engineering Technician

FULL_TIME

Associate’s Degree in Electronics Engineering Technology, Electronics Engineering, Mechanical Engineering Technology, or another substantially similar field OR electronics related Military training OR completion of a minimum of 80 hours towards a BS degree in Electronics Technology, Mechanical Engineering Technology, or substantially related field OR current ISCET certification or related certification OR an equivalent combination of education and relevant experience. Thoroughly document work in an organized manner, work collaboratively/professionally in a team environment with other Garmin associates to achieve goals including sharing ideas and information freely and positively, and identifies/resolves problems of basic scope using proper engineering tools and techniques.

Garmin International, Inc.

Component Engineering Technician

[AW]-iCims

Contractors working 30 or more hours per week can enroll in benefits through the employer of record: Medical: four plan options, including two major medical plans with individual deductibles of $1,000 or $4,000 and 80/20 in-network cost sharing, plus two lower-cost plans with flat-fee office visits. The civil design team delivers civil site development for its projects: grading and drainage, erosion control, roadways, fencing and underground utilities.

Bluedot BPO Solutions

Associate Engineering Technician, Civil (Advanced Power Generation)

Contractors working 30 or more hours per week can enroll in benefits through the employer of record: Medical: four plan options, including two major medical plans with individual deductibles of $1,000 or $4,000 and 80/20 in-network cost sharing, plus two lower-cost plans with flat-fee office visits. Black & Veatch's Virtual Design & Data Solutions (VDDS) group delivers civil site development for its projects: grading and drainage, erosion control, roadways, fencing and underground utilities.

Staff Engineering Technician, Civil Solar

Contractors working 30 or more hours per week can enroll in benefits through the employer of record: Medical: four plan options, including two major medical plans with individual deductibles of $1,000 or $4,000 and 80/20 in-network cost sharing, plus two lower-cost plans with flat-fee office visits. This lead technician supports Grid Solutions projects (substation and overhead transmission line), creating and modifying site plans, grading designs and utility layouts, and may supervise a team of technicians.

Senior Engineering Technician, Civil Substation

Senior Engineering Technician, Civil (Advanced Power Generation)

Prepare surfaces and paint various structures and equipment (e.g., walls, floors, doors, restroom facilities, etc.) to preserve wood and metal parts from corrosion and maintain a safe, comfortable working environment using various painting equipment and related tools (e.g., sprayers, rollers, brushes, thinners, etc.). Perform minor electrical maintenance to include but not be limited to replacement or repair of fixtures (e.g., wall switches and outlets, incandescent and fluorescent bulbs and tubes, ballast, sockets, fuses, minor appliances, cords, etc.) using appropriate hand, power, and specialty tools.

<p>Chenega Corporation is a premier Government and Commercial services provider to the security, healthcare, IT, environmental, military operations, construction, and tourism industries. Our integral business practices are rooted in the Alaska native culture of our shareholders. We are known for our exceptional employees, our fiscal strength, our creativity and innovation, and for providing excellent cost and performance value to our customers and business partners. Chenega returns all its profit to its native shareholders</p>

Chenega Corporation

Maintenance Engineering Technician

This opportunity is a moderately supervised position at a proficient level in a team environment, where primary responsibilities include preparing drawings with CADD, assisting with other aspects of plan preparation, such as gathering information, processing survey data, and creating exhibits for use in meetings. While the primary focus will be on local and statewide highway transportation projects, the candidate will have the opportunity to support other disciplines and projects through our Central States Offices and firmwide transportation practice.

HNTB Corp

Senior CAD Technician (Transportation Engineering)

Surplus or displaced employees eligible for CTAP, RPL, or ICTAP priority must provide: proof of eligibility (RIF separation notice, notice of proposed removal for declining a transfer of function or directed reassignment to another commuting area, notice of disability annuity termination), SF-50 documenting separation (as applicable), current performance appraisal with rating of at least "Fully Successful" or equivalent, and your most recent SF-50 noting position, grade level, and duty location with your application per 5 CFR 330. For this position, specialized experience is experience managing repairs, maintenance, and construction contracts requiring technical engineering judgement and expertise; interpreting and reviewing facility designs, specifications, or drawings; composing or reviewing contracts for projects; and developing cost estimates for a variety of multiple-use construction, repair, and service projects.

YEAR

U.S. Department of Agriculture

Associate’s Degree in Electronics Technology, Electronics Engineering, Mechanical Engineering Technology, or a substantially similar field OR electronics related Military training OR completion of a minimum of 80 hours towards a BS degree in Electronics Technology, Mechanical Engineering Technology, or substantially related field OR current ISCET certification or related certification AND a minimum of 1 year relevant experience in addition to any one of the above education options OR an equivalent combination of education and relevant experience. Must demonstrate the ability to safely and competently operate basic and advanced lab equipment and tools including PCB milling machines, oscilloscopes, EMC analyzers, etc.

Engineering Technician 2

Job Description: Replaces and repairs patient room equipment such as light bulbs, televisions, thermostats, telephones, curtain tracks, doors, door closers, corner guards, wall base, floor coverings, and ceiling tiles. It's about belonging to a community that believes in the wholeness of each person, and serves to uplift others in body, mind and spirit.

Engineering Technician 2nd Shift

We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Oversee and direct all new manufacturing engineers, technicians, production specialists, and manufacturing planner employee training to align with and develop into seasoned, knowledgeable employees for the team.

<p>Whether you're a customer, supplier, current or potential employee, or a community member, Spirit AeroSystems has something to offer you. We are the world's largest supplier of commercial airplane assemblies and components. We offer a diverse line of products and services for aerospace design, build, support and spares/repair needs. With manufacturing and business office facilities on three continents, our capabilities are technologically world-class in both proficiency and capacity.Our mission is to provide our customers with high-quality, cost-competitive products and services in the following areas:
    Fuselages
    Under-wing components
    Composites
    Wings
    Spares/repairs</p>

Spirit AeroSystems Holdings Inc

Manufacturing Engineering Manager

Working closely with the Project Manager in charge of the project, the position may identify and develop the scope of work, meet customer expectations, assist in pricing contracts, perform engineering services, oversee project quality, identify resources and manage them relative to a specific project, and meet project deadlines and profitability goals. Collaborates with a project manager with project planning and provides technical guidance on the development of the project scope, concepts and strategies to be used, task organization, estimates of effort, fee structure and amount, risk management, the identification of other required resources, and schedules necessary to complete the project.

Bartlett & West Inc

Lead Project Engineer (Traffic Engineering)

This individual will install, maintain, troubleshoot, and support a variety of industrial packaging equipment while working closely with customers, sales professionals, technical teams, and manufacturing partners. The organization continues to expand its product offerings and production capabilities, providing innovative packaging and automation solutions to customers across the region.

Professions Inc

Field Service Engineer/Technician

Crelate

Guided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions. With employees across multiple offices in the Midwest, Southwest, Rocky Mountain, and Western regions in the United States, we bring people together to practice their craft, create value, and accomplish great things.

Wilson & Company

Civil Engineering Project Manager

ea_via_bold

In this role, you will be responsible for leading and directing a team of Electrical Engineers and Technicians that support and maintain electronic components, products, and systems while enhancing existing designs, improving production techniques, improving test procedures, and focusing on project execution. Work with the Manufacturing, Customer Repair, Quality Assurance, and Product Support teams to identify opportunities for design changes that improve factory capacity, product reliability, and customer experience.

Team Leader Product Support Engineering

Budget & Financial Oversight Assist in preparing, presenting, and administering the annual Department budget; participates in forecasting future division needs, including but not limited to equipment, cost estimates for future expansion of major programs, vehicle replacements, and engineering projects. Manages and coordinates all projects and services of the Inspection and Design divisions, including all public street, storm drainage, bridge, and miscellaneous public projects; engineering studies and reports; and maintenance of all public plans, maps, and plats.

Engineering Technician Jobs in Kansas

Engineering Technician II Terracon Consultants Inc

Engineering Technician AdventHealth

Component Engineering Technician Garmin International, Inc.

Associate Engineering Technician, Civil (Advanced Power Generation) Bluedot BPO Solutions

Staff Engineering Technician, Civil Solar Bluedot BPO Solutions

Senior Engineering Technician, Civil Substation Bluedot BPO Solutions

Senior Engineering Technician, Civil (Advanced Power Generation) Bluedot BPO Solutions

Maintenance Engineering Technician Chenega Corporation

Senior CAD Technician (Transportation Engineering) HNTB Corp

Engineering Technician U.S. Department of Agriculture

Engineering Technician 2 Garmin International, Inc.

Engineering Technician 2nd Shift AdventHealth

Manufacturing Engineering Manager Spirit AeroSystems Holdings Inc

Lead Project Engineer (Traffic Engineering) Bartlett & West Inc

Field Service Engineer/Technician Professions Inc

Civil Engineering Project Manager Wilson & Company

Team Leader Product Support Engineering Garmin International, Inc.

Fleet Technician I City of Leawood, KS

Facility Technician II City of Leawood, KS

Fleet Technician II City of Leawood, KS

Similar Job Searches

Stand out to leading employers.