UNKNOWN

FEED

Twin Staffing is seeking an Electrical Designer (EPLAN) for a long-term contract-to-hire position at our industrial automation integrator client in Greater Detroit area. This role requires someone with true design expertise who can develop complete automation system hardware solutions from concept through implementation.

Twin Staffing

Hardware Design Engineer

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Blue Origin’s Enterprise Engineering Flight Systems group is seeking an experienced Senior Electrical Engineer to design and develop critical systems for the New Glenn, Lunar Transportation, In Space Systems, and Advanced Concepts Engineering business units at Blue Origin.

Blue Origin

Sr. Electrical Engineer - Navigation

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

Avionics Test Engineer III

Advanced Engineering Lab (AEL) is an engineering group at HATCI that focuses on advanced technology research and development applied to current/future production vehicles and future mobility. 2-3 years of experience in xEV high voltage battery or system development in a production-intent environment ideally including: Experience in designing and improving optimal battery cooling systems/structures.

Hyundai America Technical Center, Inc.

Battery Engineering Design - Design Engineer I/II

ADAPTED_NOW

Primary areas of responsibility include document and record control, internal audit administration, corrective-action workflow governance, management-review preparation, process metrics and objectives, risk and opportunity records, training records, and QMS software administration. Demonstrated experience applying aerospace and defense requirements, including AS9100, AS9145, AS9103, FAR/DFARS quality clauses, ITAR/EAR controls, customer-specific quality requirements, and Government or customer recordkeeping obligations as applicable.

Kratos Defense

QMS Manager

Pereless

YEAR

Sr Avionics Hardware Engineer

ea_via_bold

JOB SUMMARY: The PLM Engineer serves as the technical leader and subject matter expert for PLM, Digital Thread, Product Data Governance, and Engineering Systems transformation initiatives. Strong knowledge of Product Lifecycle Management, Product Data Management, Change Management, Requirements Management, and Engineering processes.

Denso Corp

PLM Engineer 4

Atomic Layer Deposition Engineer II

Supply Chain Program Manager III

HOUR

Requirements: Bachelor’s Degree in Mechanical Engineering/ Mechanical Engineering Technolog (8+ years of applicable experience in lieu of degree). Provide direct line/ maintenance engineering support for the Engines Assembly platform, as well as Axles Assembly processes as needed.

ICONMA&nbsp;is a global information consulting management firm providing Professional Staffing Services and Project-Based Solutions for organizations in a broad range of industries.
<ul class="ic_list">
<li>Corporate Headquarters in Troy, Michigan; 20+ locations worldwide.</li>
<li>Certified Woman-Owned Business Enterprise (WBE); certified by Women&rsquo;s Business Enterprise National Council, National Women Business Owners Corporation (NWBOC); and California Public Utilities Commission (CPUC).</li>
<li>Founded in 2000</li>
<li>2000+ Employees</li>
</ul>
The company was founded on the principle that success is derived from delivering high quality service and resources in the most responsive, flexible, and innovative way. ICONMA invests in people and resources with a single goal: To provide our customers with the highest quality service in the most responsive manner. Through its network of offices, ICONMA provides the resources to help clients maintain their competitive advantage.

Iconma

Mechanical Engineer III

Iconma Staffing

Excellent Verbal and Written Communication Skills, Positive Problem-Solving Attitude, Proficiency in MS Office Suite, Internet Skills, Strong Organization and Planning Abilities, Keen Attention to Detail, Teamwork, Reliability, Accuracy, Problem Solving Aptitude, Flexibility, Professionalism, and Effective Reporting Skills. Partner with the Director of HR, Supply Chain Manager & Warehouse Manager to ensure quality expectations are implemented throughout warehouse production and sub-assembly operations.

Talent Search PRO

Quality and Materials Engineer - Automotive manufacturing (Cylinder liner exp.)

Design parts in order to comply with Corporate and Local requirements for parts validation, considering the WCR (Worldwide Customers Requirements), ES (Engineering Specifications) and SDS (Systems Design specifications) as well as the Manufacturing and Assembly requirements. The D&R Engineer will perform feasibility analyses using CAD tools, including draft angle analysis, undercut detection, minimum bend radius validation for sheet metal, and clearance checks to support manufacturing and machining requirements.

Ford Motor Co

Design & Release Engineer: Cockpit & Trim

CONTRACTOR

Additional responsibilities may include the following: FEDE BOM, Netcom Message List, ARXML, Device Transmittal, VSCS, ED&T and Mountain Charts, ESOW.Skills Required:Application Testing, Focus on Following: Develop and execute design verification plan (DVP) for TPMS (Tire Pressure Monitoring System) on test bench, HIL (Hardware In the Loop), and vehicle per program milestones requirements (DCV, PEC, FEC, etc).Focus on Following: Quality documentation development and reviews Ensure requirements such as FMVSS, ECE, and other regulatory or legal requirements are met including RF certification and homologation. Develop and execute design verification plan (DVP) for TPMS system on bench, HIL, and vehicle per program milestones requirements (DCV, PEC, FEC, etc).Track status in FEDE and JIRA for issues.

Optimal Inc.

Application Testing Engineer

Talent Acquisition

This role involves leading early development, system feasibility, and technical design activities in collaboration with various cross-functional engineering teams. The Design & Release Engineer is responsible for the design, development, validation, and release of automotive body and exterior systems and components.

Artech LLC

Design & Release Engineer

jobdiva

Lead CI/CD bench readiness for RADC benches: ensure hardware and software baselines are aligned with target configurations, flashing flows are automated and reliable, and benches are continuously available for automated regression and feature validation. Author and maintain technical documentation and training content (bench setup guides, test repositories, SDV2 execution planning notes, Xray repository structure) to scale data-recording validation across teams and programs.

General Motors Co

Senior Software Test Engineer - Retail Data

Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. As a Senior Engineer, you will: Develop product designs that meet customer requirements and performance specifications and achieve fit, form and functional requirements through periodic design reviews and direct consultation with senior technical management and other personnel.

Roush Enterprises Inc

Senior Engineer Design and Application Engineering

Acting as the key interface between the Chief Engineer organization, Product Release Center (PRC), Development Validation Center (DVC), manufacturing, suppliers, and component engineering teams, this role ensures all vehicle, subsystem, software, manufacturing, and supplier interfaces function as a cohesive and optimized system. The position is responsible for driving system architecture, interface management, vehicle integration, manufacturability, technical risk mitigation, validation planning, change management, prototype build readiness, quality initiatives, and cost optimization from concept through production launch and continuous improvement.

HireTalent

Design Systems Application Engineer

BIM Modeling & Documentation o Develop detailed 3D structural models in Autodesk Revit and Vertex BD by interpreting a wide range of inputs (including preliminary architectural sketches, cost parameters, and project requirements), while actively collaborating with diverse stakeholders such as architects, manufacturers, installers, business and finance teams, and clients. This role plays a critical part in bridging architectural BIM models and fabrication ready manufacturing outputs, leveraging Autodesk Revit and Vertex BD to deliver efficient, code compliant structural solutions and CVS files for roll form machines.

Sapsol Technologies Inc

CAD Design

The Senior Structural Engineer, with limited supervision from the Manager of Structural Engineering, will provide the technical, organizational and communication skills to produce well-designed and coordinated construction documents for structural systems. Since 1982, Ghafari Associates has taken a personal approach to highly technical projects in complex markets including: aviation, manufacturing, healthcare, retail, hospitality, K-12 and higher education.

Ghafari Associates

Senior Structural Engineer

This role serves as a critical link between manufacturing engineering, controls, equipment suppliers, operations, maintenance, quality, and IT/OT teams to ensure automated equipment is successfully integrated into ONE's manufacturing environment and achieves required safety, quality, throughput, reliability, and operational performance. The ideal candidate combines strong controls and automation expertise with practical manufacturing experience and is comfortable troubleshooting complex equipment directly on the production floor.

Data Manager Jobs in Andover, MA

Hardware Design Engineer Twin Staffing

Sr. Electrical Engineer - Navigation Blue Origin

Avionics Test Engineer III Blue Origin

Battery Engineering Design - Design Engineer I/II Hyundai America Technical Center, Inc.

QMS Manager Kratos Defense

Sr Avionics Hardware Engineer Blue Origin

PLM Engineer 4 Denso Corp

Atomic Layer Deposition Engineer II Blue Origin

Supply Chain Program Manager III Blue Origin

Mechanical Engineer III Iconma

Quality and Materials Engineer - Automotive manufacturing (Cylinder liner exp.) Talent Search PRO

Design & Release Engineer: Cockpit & Trim Ford Motor Co

Application Testing Engineer Optimal Inc.

Design & Release Engineer Artech LLC

Senior Software Test Engineer - Retail Data General Motors Co

Senior Engineer Design and Application Engineering Roush Enterprises Inc

Design Systems Application Engineer HireTalent

CAD Design Sapsol Technologies Inc

Senior Structural Engineer Ghafari Associates

Automation Integration Engineer Our Next Energy

Similar Job Searches

See More Jobs

Stand out to leading employers.