NewMaterials/Metallurgical Engineer Williams InternationalMaterials/Metallurgical EngineerOgden, UTWilliams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates. The qualified candidate will have primary responsibility for working in a lean manufacturing cell implementing new gas turbine engines component part designs and developing process improvements for existing designs.
Construction Engineer I (Temp-to-Hire) SOLV Energy LLCConstruction Engineer I (Temp-to-Hire)UTRemote$29.78–$37.23 / hourThis role contributes to (1) Warranty Analysis, by gathering data and supporting engineering review of potential design or installation issues; (2) Emerging Technologies Implementation, by assisting with GPS-enabled pile driving, drone-based survey workflows, and new construction tools; (3) Construction Engineering Support During Operations, by coordinating RFIs, design updates, and field engineering clarifications; and (4) Pile Load Testing Support During Initial Design, by assisting with planning, scheduling, documentation, and engineering communication for pre-construction pile testing programs. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting.
Engineer Electrical - 16709 Northrop Grumman CorpEngineer Electrical - 16709Roy, UT$79,300–$118,900 / yearBasic Qualifications: Principal Electrical Engineer: Bachelor's degree in Science, Technology, Engineering, and Mathematics (STEM) with 5 years of experience; or Master's degree with 3 years of experience; or PhD with 0 years of experience. The candidate must be proficient in system‑level test execution, working with classified data and classified network hardware, and comfortable collaborating with other engineers to meet rigorous nuclear surety requirements.
Sr / Principal Mechanical Engineer - 17045 Northrop Grumman CorpSr / Principal Mechanical Engineer - 17045Roy, UT$89,400–$134,200 / yearThe qualified candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines to engineer design solutions to challenging problems through the development of Interface Control Models (ICM). Basic Qualifications: Principal Engineer: Bachelor's degree in Science, Technology, Engineering, and Mathematics (STEM) with 5 years of experience; or Master's degree with 3 years of experience; or PhD with 1 year of experience.
["Sentinel Principal Structural Engineer","Sentinel Principal Structural Engineer"] Northrop Grumman["Sentinel Principal Structural Engineer","Sentinel Principal Structural Engineer"]Roy$98,400–$147,600 / yearAnalyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.
Mechanical Engineer II WavetronixMechanical Engineer IISpringville, UTThat commitment extends beyond the work itself — our Springville campus is designed to help people make a living together, with on-site restaurants, thoughtfully designed gardens and gathering spaces, learning programs, and festivals and events that welcome families throughout the year. Design Focus : E lectronic enclosures, mounting systems, thermal management (heat sinks, airflow, heating elements, simulation), and environmental protection (IP-rated sealing, gasketing, weatherproofing).
NewSentinel - Staff Systems Engineer (AFT) - 18490* Northrop Grumman CorpSentinel - Staff Systems Engineer (AFT) - 18490*Roy, UT$152,900–$229,300 / yearMust have an active U.S. Government DoD Top Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
NewSentinel Mechanical Engineer / Principal Mechanical Engineer -16924* Northrop Grumman CorpSentinel Mechanical Engineer / Principal Mechanical Engineer -16924*Roy, UT$72,100–$108,100 / yearThe above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions. Principal Mechanical Engineer (level 3)Bachelor's degree in Mechanical Engineering or related STEM field and 5 years of relevant experience; or Master''s degree with 3 years of relevant experience.
NewSentinel - Mechanical Engineering Manager 2 - 18902 Northrop Grumman CorpSentinel - Mechanical Engineering Manager 2 - 18902Roy, UT$126,600–$189,800 / yearAs an Engineering Manager supporting the SDS Launch Systems (LS) Support Equipment team, you will be responsible for leading a team of engineers developing complex test stations and ancillary Support Equipment items, coordinating with suppliers, reviewing designs, and collaborating with other NG Integrated Product Teams (IPTs) to ensure adherence to, and implementation of requirements as well as ensuring the designed Support Equipment items are delivered successfully. Northrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities and associated infrastructure.
NewPrincipal Mechanical Engineer / Sr. Principal Mechanical Engineer 16935 Northrop Grumman CorpPrincipal Mechanical Engineer / Sr. Principal Mechanical Engineer 16935Roy, UT$89,400–$134,200 / yearMust have an active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Electrical Systems Engineer Power Innovations International IncElectrical Systems EngineerAmerican Fork, UTPower Innovations International, part of the LiteOn Group, is seeking a Systems Engineer to lead the design and integration of next-generation energy solutions, including EV charging systems, bidirectional V2H/V2X technologies, and microgrid power-conversion products. As a Systems Engineer, you will own complete systems-level electrical designs, develop and validate prototypes, support manufacturing, and ensure products meet safety, performance, and certification requirements.
["Principal Mechanical Engineer (18524*)","Principal Mechanical Engineer (18524*)"] Northrop Grumman["Principal Mechanical Engineer (18524*)","Principal Mechanical Engineer (18524*)"]Roy$89,400–$134,200 / yearThe above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. We operate in a fast-paced, mission-driven environment where innovative concepts are matured quickly into credible, testable solutions that address our nation's most demanding strategic deterrence needs.
["Sentinel Senior Director of Programs - SEIT","Sentinel Senior Director of Programs - SEIT"] Northrop Grumman["Sentinel Senior Director of Programs - SEIT","Sentinel Senior Director of Programs - SEIT"]Roy$230,000–$345,000 / yearIn this role, the selected candidate will be expected to perform and provide oversight and support in the following areas: · Initiate a collaborative environment with other systems engineering organizations both within CS and across the Sentinel program to ensure successful development of CDRLs and overall systems engineering execution. As the C&L SEIT Senior Director reporting to the Command Systems vice president, you will be responsible for providing execution leadership for the planning and performance of systems engineering activities across the geographically dispersed Command Systems segment.
Electrical Engineer / Principal Electrical Engineer - 7266-1 Northrop Grumman CorpElectrical Engineer / Principal Electrical Engineer - 7266-1Roy, UT$79,300–$118,900 / yearNorthrop Grumman Strategic Deterrent Systems division is seeking a Electrical Engineer / Principal Electrical Engineer for the Air Vehicle Equipment (AVE) Integration and Test (I&T) Lab Design and Integration (D&I) team. Principal Electrical Engineer: Bachelor's degree in a STEM field (Science, Technology, Engineering, Mathematics) with 5 years or experience; or Master''s degree with 3 years of experience; PhD with 1 years of experience.
Principal Mechanical Engineer (18524*) Northrop Grumman CorpPrincipal Mechanical Engineer (18524*)Roy, UT$89,400–$134,200 / yearNorthrop Grumman's Defense Systems is looking for a Principal Mechanical Engineer, located in Roy, UT to work a restricted effort as part of the flight systems futures operating unit. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Principal/Sr. Principal Electrical Engineer - (16892) Northrop Grumman CorpPrincipal/Sr. Principal Electrical Engineer - (16892)Roy, UT$98,400–$147,600 / year4+ years of experience with one or more of the following: requirements management/analysis/allocations including the use of DOORS or equivalent; Model-Based Systems Engineering (MBE/MBSE) practices, languages and/or tools such as Cameo, Rhapsody or MagicDRAW; interface development experience; architecture development experience; Verification including verification method determination, RVAM development. Basic Qualifications: Principal Engineer Electrical: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university and 5 years of experience, or 2 years of experience with a Master's degree, or 0 years of experience with a PhD.
Sentinel - Staff Infrastructure Lead Engineer - Mechanical (19310) Northrop Grumman CorpSentinel - Staff Infrastructure Lead Engineer - Mechanical (19310)Roy, UT$139,000–$208,600 / yearThe Staff Mechanical Lead Engineer reports to the Director of Infrastructure and is responsible for ensuring robust, timely, and well-coordinated technical products within the Infrastructure scope of work; identifying, actioning, and measuring technical process improvements and optimization; and working with other technical leaders across the Sentinel program to represent Infrastructure work products and dependencies. Cross-Element Coordination: Working closely with technical leadership and contributors across the program to identify impacts on INF work scope resulting from external changes or impacts on external stakeholders resulting from INF artifacts.
Sr. Principal Propulsion Engineer - 4 Northrop Grumman CorpSr. Principal Propulsion Engineer - 4UT$122,800–$184,200 / yearThis position will lead a technical team of analysts and design engineers responsible for loaded motor design, structural and ballistic analysis, and production support on primarily Promontory‑based solid rocket motor programs. This role will require strong understanding of the loaded motor design and analysis process as well as strong communication skills to coordinate work with program leadership, and personally contribute to the loaded motor engineering discipline.
Sentinel - Principal/Sr. Principal Mechanical Engineer (18982) Northrop Grumman CorpSentinel - Principal/Sr. Principal Mechanical Engineer (18982)Clearfield, UT$89,400–$134,200 / yearExcellent communication and people skills required to work with key stakeholders within other engineering disciplines, including but not limited to system engineering and electrical engineering for capturing all engineering requirements needed for the design and to achieve program objectives in a timely manner. Northrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities and associated infrastructure.
Sentinel - Staff Engineer Systems RIA AVE Technical Lead - 18837 Northrop Grumman CorpSentinel - Staff Engineer Systems RIA AVE Technical Lead - 18837Roy, UT$152,900–$229,300 / yearNorthrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities, and associated infrastructure. What you will get to do: The selected engineer will be a Systems Engineering SME and responsible for driving technical rigor into work products for the Requirements, Interfaces, and Architecture (RIA) teams for the Aerospace Vehicle Equipment (AVE) Segment.
Sentinel - Principal/Sr. Principal Mechanical Engineer (16951) Northrop Grumman CorpSentinel - Principal/Sr. Principal Mechanical Engineer (16951)Roy, UT$89,400–$134,200 / yearThe qualified candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines to engineer design solutions to challenging problems through the development of Product Definition Packages (PDP). Requires a bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with 5 years of related experience; or a master's degree with 3 years of related experience (Sr.
Sentinel - Sr. Manager MSE - Launch Systems Production Operations Northrop Grumman CorpSentinel - Sr. Manager MSE - Launch Systems Production OperationsRoy, UT$166,700–$250,100 / yearProvide leadership to cross functional teams (MEs, IEs, OPMs, Tooling, Quality, Field Support, GSC, etc.) to design, develop, and implement complex manufacturing systems for Sentinel: Integrate processes, equipment, digital manufacturing technologies, and factory information systems. What You Will Get To Do: As a Manufacturing Systems Engineering Manager 3 supporting the Sentinel Launch Infrastructure OU in Roy, UT, you will lead cross functional manufacturing systems strategy and execution at the Integrated Product Team (IPT) level, assigned to your respective IPT lead.
Sentinel Command Systems Node Integration Manager 3 - 18150 Northrop Grumman CorpSentinel Command Systems Node Integration Manager 3 - 18150Roy, UT$166,700–$289,600 / yearEffectively leading the Node Integration organization, ensuring that the team has the skills, resources, role clarity, tools, processes and other ingredients necessary to ensure successful execution; partnering as required with Functional Homeroom and operating unit leadership as necessary to address areas of concern. What You'll Get To Do: Ownership of program execution plan and technical baseline of all systems engineering work products related to Nodes, including diagnostics and communication of any areas of concern in ability to meet the baselines.
Tool Planner 2/3 Northrop Grumman CorpTool Planner 2/3UT$65,500–$98,300 / yearThe above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions. As a Tool Planner, you will be responsible for responsible for the concept, design, fabrication drawings, inspection requirements, procurement requirements, verification requirements and fabrication support for tooling and equipment for Aerospace applications.
Flight Systems Futures Sr Principal Mechanical Engineer (Top Secret Clearance) 19017 Northrop Grumman CorpFlight Systems Futures Sr Principal Mechanical Engineer (Top Secret Clearance) 19017Roy, UT$111,700–$167,500 / yearThe above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions. The Flight Systems Futures operating unit within Strategic Deterrent Systems is seeking highly motivated talent to join a team at the forefront of next-generation hypersonic capabilities.
Sentinel - Mechanical Engineer / Principal Mechanical Engineer (17010) Northrop Grumman CorpSentinel - Mechanical Engineer / Principal Mechanical Engineer (17010)Roy, UT$72,100–$108,100 / yearNorthrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities and associated infrastructure. Must have an active U.S. Government DoD Secret security clearance at time of application, current and within scope (awarded or renewed in the last 6 years), with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need.
Sentinel Mission Equipment Complex (MEC) - Zone Lead Manager 3 - 18963 Northrop Grumman CorpSentinel Mission Equipment Complex (MEC) - Zone Lead Manager 3 - 18963Roy, UT$166,700–$250,100 / yearCost & Schedule Management (CAM) - Develop and maintain the Earned Value Management System (EVMS) baseline for the MEC zone work scope; track cost, schedule, and performance; drive corrective actions to maintain cost and schedule objectives across the MEC product teams. What You'll Get To Do: The Mission Equipment Complex (MEC) IPT is seeking a senior leader to own the end-to-end design, integration, and release of the MEC zone, spanning four product teams: MEC Structures, Launch Support (LS) Power, LS Environmental Control System (ECS), and Delay/Denial.
Sentinel - Mechanical Engineer level 2/3 ( *16920) Northrop Grumman CorpSentinel - Mechanical Engineer level 2/3 ( *16920)Roy, UT$72,100–$108,100 / yearRequires a bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with 2 years of related experience; or a master's degree with 1 year of related experience (Principal level requires 5 years with a bachelor''s; or 3 years with a master''s). The qualified candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines to engineer design solutions to challenging problems through the development of Product Definition Packages (PDP).
Mechanical Engineering Manager 2 - 17081 Northrop Grumman CorpMechanical Engineering Manager 2 - 17081Roy, UT$126,600–$189,800 / yearMust have an active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) disciplines from an accredited university and 8 years of related experience, or a Master's Degree in a related discipline and 6 years of relevant experience.
Sentinel - Principal/Sr Principal Mechanical Engineer (17104) Northrop Grumman CorpSentinel - Principal/Sr Principal Mechanical Engineer (17104)Roy, UT$89,400–$134,200 / yearNorthrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities and associated infrastructure. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Sentinel Senior Director of Programs - SEIT Northrop Grumman CorpSentinel Senior Director of Programs - SEITRoy, UT$230,000–$345,000 / yearIn this role, the selected candidate will be expected to perform and provide oversight and support in the following areas: Initiate a collaborative environment with other systems engineering organizations both within CS and across the Sentinel program to ensure successful development of CDRLs and overall systems engineering execution. As the C&L SEIT Senior Director reporting to the Command Systems vice president, you will be responsible for providing execution leadership for the planning and performance of systems engineering activities across the geographically dispersed Command Systems segment.
Electrical/Principal Electrical Engineer - 16883 Northrop Grumman CorpElectrical/Principal Electrical Engineer - 16883Roy, UT$79,300–$118,900 / yearPrincipal Electrical Engineer: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university and 5 years of experience, or 2 years of experience with a Master's degree, or 0 years of experience with a PhD. May perform research, trade studies, evaluation, and systems integration in electrical or electro-mechanical systems, cables, connectors, power systems, test equipment, and more.
Sentinel - Principal / Sr. Principal Mechanical Engineer (17007) Northrop Grumman CorpSentinel - Principal / Sr. Principal Mechanical Engineer (17007)Roy, UT$89,400–$134,200 / yearNorthrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities and associated infrastructure. Work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines to engineer design solutions to challenging problems through the development of Interface Control Models (ICM).
Sentinel - Mechanical Engineer level 2/3 (18981) Northrop Grumman CorpSentinel - Mechanical Engineer level 2/3 (18981)Clearfield, UT$72,100–$108,100 / yearRequires a bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with 2 years of related experience; or a master''s degree with 1 year of related experience (Principal level requires 5 years with a bachelor''s; or 3 years with a master''s). Excellent communication and people skills required to work with key stakeholders within other engineering disciplines, including but not limited to system engineering and electrical engineering for capturing all engineering requirements needed for the design and to achieve program objectives in a timely manner.
Principal/ Sr. Principal Electrical - (16879 & 16896) Northrop Grumman CorpPrincipal/ Sr. Principal Electrical - (16879 & 16896)Roy, UT$98,400–$147,600 / yearBasic Qualifications: Principal Engineer Electrical: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university and 5 years of experience, or 2 years of experience with a Master's degree, or 0 years of experience with a PhD. Principal Engineer Electrical: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university and 9 years of experience, or 7 years of experience with a Master's degree, or 4 years of experience with a PhD.
NewSentinel Systems Engineering Manager 3 - Electromagnetic Environmental Effects E3 8575-1 Northrop Grumman CorpSentinel Systems Engineering Manager 3 - Electromagnetic Environmental Effects E3 8575-1Roy, UT$166,700–$276,500 / yearPreferred candidate will be a proven leader; a problem solver; possess a strong work ethic; and have excellent communications and interpersonal skills required to work closely with teammates, stakeholders and both internal and external customers. Northrop Grumman Defense Systems is seeking a Systems Engineering Manager 3 - Electromagnetic Environmental Effects E3 to oversee the Electromagnetic Environmental Effects (E3) team within the SET Specialty Engineering directorate.
Senior Drainage Engineer Parsons CorpSenior Drainage EngineerSandy, UTIn this role, you'll lead drainage and stormwater design on high-impact transportation projects, mentor junior engineers, and collaborate with a multidisciplinary team that is shaping the future of mobility, safety, and resilience in our communities. Parsons is looking for an amazingly talented Senior Drainage Engineer to join our team growing team in Salt Lake City and lead critical infrastructure design projects in Utah and across the nation.
Manufacturing Operations Manager Flynn CompaniesManufacturing Operations ManagerSalt Lake City, UT$120,000–$140,000 / yearFlynn Group of Companies is the leading trade contractor in North America that works on virtually every aspect of a building's outer layer, including Roofing, Glazing, Waterproofing, and Architectural Metals. Managing and oversee all key departments within manufacturing group, included but not limited to quality, glazing operation, ACM operation, sheet metal operations, logistics and maintenance.
Structural Project Engineer BHB EngineersStructural Project EngineerSt. George, UTOur Ideal Candidate As the ideal candidate you will take professional pride in providing top notch structural engineering solutions for the commercial, industrial, healthcare, multi-family residential and higher education sectors. You will work with a variety of materials allowing you to quickly gain experience and knowledge to produce quality work in a supportive and fun team environment.
PremierOne CAD Application Specialist Motorola Solutions IncPremierOne CAD Application SpecialistUT$75,000–$85,000 / yearStakeholder Communication: Present analysis results and project updates to stakeholders, developing clear and informative presentations that support effective decision-making and facilitate project buy-in from customer leadership. Project Management Support: Partner with Project Managers and Program Directors throughout the project lifecycle, from inception to conclusion, to ensure timely delivery of software solutions while adhering to scope and budget constraints.
Full Time - Sales Specialist - Appliances - Day Lowe's Home CentersFull Time - Sales Specialist - Appliances - DayRiverdale, UtahBased in Mooresville, N.C., Lowe's supports the communities it serves through programs focused on creating safe, affordable housing, improving community spaces, helping to develop the next generation of skilled trade experts and providing disaster relief to communities in need. Serve as a point of contact for customers and vendors within your department, providing project estimates, scheduling installer visits, processing and tracking customer orders/installations, and following up to ensure project completion.
Full Time - Sales Specialist - Millwork - Day Lowe's Companies IncFull Time - Sales Specialist - Millwork - DaySalt Lake City, UTBased in Mooresville, N.C., Lowe's supports the communities it serves through programs focused on creating safe, affordable housing, improving community spaces, helping to develop the next generation of skilled trade experts and providing disaster relief to communities in need. Serve as a point of contact for customers and vendors within your department, providing project estimates, scheduling installer visits, processing and tracking customer orders/installations, and following up to ensure project completion.
Public Safety Software Application Specialist (Flex, CommandCentral, PremierOne) Motorola Solutions IncPublic Safety Software Application Specialist (Flex, CommandCentral, PremierOne)UTRemote$75,000–$85,000 / yearStakeholder Communication: Present analysis results and project updates to stakeholders, developing clear and informative presentations that support effective decision-making and facilitate project buy-in from customer leadership. Project Management Support: Partner with Project Managers and Program Directors throughout the project lifecycle, from inception to conclusion, to ensure timely delivery of software solutions while adhering to scope and budget constraints.
Presales Engineer - West Motorola Solutions IncPresales Engineer - WestUT$85,000–$110,000 / yearResponsibilities: Working closely with the Sales Team to deliver customer-driven, world-class, leading-edge, end-to-end solutions that rise to the challenges of first responder, government, utility, transportation, and enterprise customers across the country. Provide engineering services for Customers, including commissioning and testing Motorola equipment in accordance with technical requirements, documentation and contract obligations, system presentation for the internal/external customers.
NewCAD+CNC Technician at Boot Solutions Boot SolutionsCAD+CNC Technician at Boot SolutionsSalt Lake City, UT$22–$23 / hourFull timeThis role involves modifying scan data in CAD software, refining digital models, preparing files for CNC production, maintaining organized digital production records, and coordinating workflow with our warehouse team. This position offers the opportunity to develop specialized skills in CAD design, CNC manufacturing, digital file management, and custom ski boot production while helping shape an innovative approach to remote bootfitting.
Senior Mechanical Engineer, HVAC & Utilities External Dennis Group JobsSenior Mechanical Engineer, HVAC & UtilitiesSalt Lake City, UtahOur mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Dennis Group’s Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities.
Mechanical Engineer, Mid-Level (HVAC & Utilities) External Dennis Group JobsMechanical Engineer, Mid-Level (HVAC & Utilities)Salt Lake City, UtahOur mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Dennis Group’s Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities.
NewQuality Analyst KIHOMACQuality AnalystLayton, UT$90,000–$115,000 / yearDevelop quality assurance plans as part of the business development process by analyzing drawings and specifications, outlining tasks and identifying potential deficiencies, conducting risk analyses (DFMEA/PFMEA), and generally providing the quality perspective from the proposal phase to post award. Validate quality processes by establishing product specifications and quality attributes, documenting evidence, determining operational and performance qualifications, writing and updating plans, procedures, processes which support high quality and efficiency in the producing of a service or product.
NewManufacturing/Composites Engineer Advanced Composites IncManufacturing/Composites EngineerSalt Lake City, UTExperience with CAD software (Solidworks preferred) Ability to work in an individual and team environment Computer fluency in Word, Excel, Outlook, Solidworks Experience with basic hand and measurement tools Engineering design project experience Professional written and verbal communication skills Personal commitment to safety Ability and desire to learn new skills. The ideal candidate would have the necessary communication and technical skills to review product drawings with customers to discuss current and new projects as well as coordinate program priorities, review and assist in implementation of process documentation, review and approve customer purchase orders, and assist in developing new systems to track product.
Packaging Engineer PEAK Technical Services Inc.Packaging EngineerOgden, UT$90,000–$110,000 / yearQualifications: BS in Packaging Engineering strongly preferred; Mechanical/Industrial acceptable, 3-5 years of related experience, CAD & Packaging: SolidWorks/NX/CATIA; ArtiosCAD for corrugated/dunnage; read drawings, GD&T, basic tolerance stacks. Coordinate with internal teams (engineering, manufacturing, sales, finance, etc.) and our packaging vendors for new and existing projects to find opportunities to reduce cost and improve performance, efficiencies, and safety.