NewMobile Service Technician FleetPrideMobile Service TechnicianAgawam, MassachusettsThe Mobile Technician is expected to have mastered all applications of Preventative Maintenance and to perform basic and advanced adjustments, repairs and component replacements with limited supervision on trucks and trailers. Exposure to Inside/Outside Conditions, Extreme Temperatures (average of 100 Degrees F), Humid Conditions, Chemical Hazards, Vibration, Equipment Noise, Work in enclosed and confined spaces.
Anesthesia Technician II- Per Diem Lowell General HospitalAnesthesia Technician II- Per DiemBoston, MA$21.53–$26.91 / hourIn addition, this role focuses on performing the following Anesthesia related duties: Provides anesthesia for patients undergoing surgical, obstetric, diagnostic, or therapeutic procedures while monitoring the patient's condition and supporting vital organ functions. Assists anesthesiologists and or nursing staff with direct patient care duties including but not limited to assisting with patient transfers, preparation of patient equipment, intubations, and regional anesthesia and placement of invasive monitors.
Central Sterile technician Lahey Hospital and Medical CenterCentral Sterile technicianMilton, MA$25–$33.65 / hourActual compensation is determined based on several factors, that may include seniority, education, training, relevant experience, relevant certifications, geography of work location, job responsibilities, or other applicable factors permissible by law. QUALIFICATIONS: Min Education: High School Diploma (or equivalent GED) and graduate of a CSPD training program required unless grandfathered due to sufficient current CSPD work experience.
Trailer/SRI Repair Technician U-Haul International IncTrailer/SRI Repair TechnicianBoston, MA$18–$20 / hourThe states in which U-Haul will decline to hire nicotine users are: Alabama, Alaska, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Iowa, Kansas, Maryland, Massachusetts, Michigan, Nebraska, Pennsylvania, Texas, Utah, Vermont, Virginia, and Washington. Physical Demands: The work requires some physical exertion, such as long periods both indoors and outdoors while remaining stationary, traversing spaces, repositioning to reach and use tools, and moving a minimum of 50 lbs.
Per diem Central Sterile technician Lahey Hospital and Medical CenterPer diem Central Sterile technicianMilton, MA$25–$33.65 / hourActual compensation is determined based on several factors, that may include seniority, education, training, relevant experience, relevant certifications, geography of work location, job responsibilities, or other applicable factors permissible by law. QUALIFICATIONS: Min Education: High School Diploma (or equivalent GED) and graduate of a CSPD training program required unless grandfathered due to sufficient current CSPD work experience.
Pest Control Technician (Manchester) GreenixPest Control Technician (Manchester)Framingham, MassachusettsAssist in sales activities - ensure customers have the most complete Pest Control and Animal Management services. Job Description: At Greenix, we are committed to protecting and nurturing the communities we serve and live in, focused on one customer, one employee and one solution at a time.
Floor Technician SBM ManagementFloor TechnicianNorth Adams, MA$16–$17 / hourCertificates, Licenses, Registrations: May be required to have a valid driver's license Complete all safety and task training certification May be required to be forklift certified. For information about SBM's benefits, please visit SBM's website at: www.sbmmanagement.com/careers Careers - SBM.
GMP Technician, Life Science SBM ManagementGMP Technician, Life ScienceLexington, MAFully train in area job functions for specific shift assignment and area classification including walls, floors, windows, wipe-downs, maintenance issue reporting, and shut-down cleaning. For information about SBM's benefits, please visit SBM's website at: www.sbmmanagement.com/careers Careers - SBM.
NewMaintenance Technician LightForce Orthodontics IncMaintenance TechnicianWilmington, MAThis position provides the opportunity to build expertise in production equipment, troubleshooting techniques, and maintenance best practices while working closely with Production, Engineering, and other cross-functional teams. Through continuous learning and hands-on experience, this role contributes to the reliability and continuous improvement of manufacturing operations while supporting LightForce''s mission, values, and commitment to operational excellence.
General Utility Sanitation Technician Frito-Lay IncGeneral Utility Sanitation TechnicianRandolph, MAHere is a list of some of the more frequent tasks you can expect to perform during a typical workday as a Sanitation Technician: Cleaning the equipment and lines necessary for manufacturing products. Here is a list of some of the more frequent tasks you can expect to perform during a typical workday as a General Utility: Supporting production by stacking and feeding bread into the equipment.
Field Service Technician Matthews International CorpField Service TechnicianMARegularly/Occasionally exposed to wet and/or humid conditions, moving mechanical parts, fumes or airborne particles, extreme cold & heat, risk of electrical shock, and toxic or caustic chemicals. Matthews Memorialization is a leader in the memorialization industry, committed to supporting customer business growth and helping families transition from grieving to remembrance.
GMP Technician SBM ManagementGMP TechnicianFramingham, MA$21–$22 / hourFully train in area job functions for specific shift assignment and area classification including walls, floors, windows, wipe-downs, maintenance issue reporting, and shut-down cleaning. For information about SBM's benefits, please visit SBM's website at: www.sbmmanagement.com/careers Careers - SBM.
Electrical In-House Service / Repair Technician Teledyne TechnologiesElectrical In-House Service / Repair TechnicianBillerica, MassachusettsOur products include advanced surveillance sensors, unmanned air and ground vehicles, sensing devices used to detect chemicals, biological agents, radiation and explosives, and a host of other solutions that help warfighters, first responders, and search-and-rescue teams do their jobs better. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research..
Safety System Technician Assistant University of Massachusetts Medical SchoolSafety System Technician AssistantWorcester, MassachusettsResponsibilities: Support installations, maintenance, troubleshooting and repairs building life-safety equipment and systems, including addressable networked fire alarm systems, suppression systems and central station monitoring equipment. Director or designee, the Assistant Safety System Technician supports installation, repair, operation, and testing or equipment used in supervised fire detection, notification and suppression systems throughout the University Campus.
Fire Alarm Safety Systems Technician University of Massachusetts Medical SchoolFire Alarm Safety Systems TechnicianWorcester, MassachusettsUnder the general supervision of the Maintenance Supervisor or designee, the Safety System Technician installs, repairs, operates, tests, and modifies equipment used in supervised fire detection, notification and suppression systems throughout the University and off-site facilities. Ability to perform physically arduous tasks; normal dexterity, visual acuity, ability to lift up to 50 lbs., ability to climb and work from ladders and scaffolding, and work in confined areas.
Building Maintenance Technician FirstService CorpBuilding Maintenance TechnicianBoston, MA$37–$40 / hourJob Overview: As a Maintenance Technician, the primary responsibilities are to perform a variety of work in the maintenance and repair of equipment and facilities of common area elements and buildings, condominium buildings and the recreation center including but not limited to carpentry, roofing/gutters, electrical, plumbing, masonry, painting tasks and snow removal. Work is performed in a variety of environmental conditions, with exposure to outdoor temperatures, weather variations, traffic and equipment noise, equipment vibrations, vehicle and/or chemical fumes, chemicals such as cleaning solvents and grease, machinery and their moving parts and dust.
Multi Pest Technician Braman Termite & Pest EliminationMulti Pest TechnicianAuburn, MAOur technicians complete a structured, on-the-job training program alongside experienced professionals and receive ongoing support to stay current with industry advancements. We also provide a full certification program, including guidance from a board-certified entomologist, to help you successfully complete state licensing requirements and build your career in the field.
Lab Technologist/Technician Microbiology South Shore Health Systems IncLab Technologist/Technician MicrobiologyWeymouth, MA$29.29–$39.42 / hourMicrobiologist with bench experience sufficient to independently perform, distinguish, and interpret: specimen and colony gram stains, normal flora versus pathogenic bacteria morphologies on routine and selective media, selection and isolation of pure colonies for identification and susceptibility testing from mixed plated growth for aerobes and anaerobes, able to associate various biochemical tests with their correct applications, normal and abnormal sensitivity patterns (automated mic, Kirby Bauer, and E-test), utilize CLSI antimicrobial guidelines for sensitivity results, troubleshoot extent of workup and additional antibiotic testing, ability to associate body site, disease state, and bacterial pathogen. In the event of an occurrence resulting in incorrect results reported on a patient, employee consistently follows the established policy on Correcting Results including the notification and documentation of corrective actions taken.
Production Technician Contractor Commonwealth Fusion Systems LLCProduction Technician ContractorSomerville, MA$30–$41 / hourThe production technician is an integral part of the CFS team performing and monitoring the manufacturing processes required to build and test superconducting magnets. Dedication to safety to mitigate industrial hazards that may include heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, and cryogenicss.
Electronics Test Technician - 2nd Shift RTX CorpElectronics Test Technician - 2nd ShiftMAMachine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic, vibration, and environmental test/measurement/diagnostic equipment, soldering, potting equipment, solvents, chemicals, fixtures, common hand tools, ladders, staging, hoists, gauges, power equipment, and other tools and equipment of the trade. Electronics Test Technician performs moderately complex testing, troubleshooting and acceptance of production, deliverable material on pre-production and development systems, infrared devices, lowest replaceable unit, circuit cards, subs, final assemblies and components.
Electronics Test Technician - 1st Shift RTX CorpElectronics Test Technician - 1st ShiftMAMachine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic, vibration, and environmental test/measurement/diagnostic equipment, soldering, potting equipment, solvents, chemicals, fixtures, common hand tools, ladders, staging, hoists, gauges, power equipment, and other tools and equipment of the trade. Electronics Test Technician performs moderately complex testing, troubleshooting and acceptance of production, deliverable material on pre-production and development systems, infrared devices, lowest replaceable unit, circuit cards, subs, final assemblies and components.
Electronics Test Technician - 3rd Shift RTX CorpElectronics Test Technician - 3rd ShiftMAMachine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic, vibration, and environmental test/measurement/diagnostic equipment, soldering, potting equipment, solvents, chemicals, fixtures, common hand tools, ladders, staging, hoists, gauges, power equipment, and other tools and equipment of the trade. Electronics Test Technician performs moderately complex testing, troubleshooting and acceptance of production, deliverable material on pre-production and development systems, infrared devices, lowest replaceable unit, circuit cards, subs, final assemblies and components.
Sterile Processing Technician South Shore Health Systems IncSterile Processing TechnicianWeymouth, MA$21.21–$28.55 / hourIf no replacement is available missing items are clearly noted on the count sheet and an "Incomplete" sticker listing missing items is attached to the outer wrap. a - Participates in continued learning and possess a willingness and ability to learn and utilize new technology and procedures that continue to develop in their role and throughout the organization.
Biohazard Remediation Technician CbBiohazard Remediation TechnicianBridgewater, MassachusettsIn this role, you will respond to emergency and scheduled calls to clean, disinfect, and restore environments contaminated by blood, bodily fluids, chemical substances, and other biohazardous materials. Transport and dispose of biohazardous waste in compliance with OSHA, EPA, and Massachusetts Department of Environmental Protection (MassDEP) regulations.
Production Technician Contractor Commonwealth Fusion SystemsProduction Technician ContractorSomerville, MA$30–$41 / hourJoin the power movement as a Production Technician Contractor The production technician is an integral part of the CFS team performing and monitoring the manufacturing processes required to build and test superconducting magnets. Dedication to safety to mitigate industrial hazards that may include heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, and cryogenicss.
Maintenance Technician Atria Senior Living - Woodbriar PlaceMaintenance TechnicianFalmouth, Massachusetts$25–$30 / hourFull timeResponsibilities: Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems. Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment.
Pest Technician - $1,500 Sign on Bonus TerminixPest Technician - $1,500 Sign on BonusWoburn, MassachusettsYou will be responsible for identifying and eliminating pests from residential properties by conducting thorough inspections, determining the type of pest infestation, applying appropriate treatments like pesticides and traps, and providing preventative measures to prevent future infestations, all while adhering to safety regulations and communicating with clients about pest control solutions. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue.
Sterile Processing Technician II Dana-Farber Cancer Institute IncSterile Processing Technician IIBOSTON, MA$56,900–$62,600 / yearDemonstrates knowledge of high-level disinfection of various equipment (maintains daily log, testing efficacy of disinfecting solution with each cycle, performs biological tests, test strips quality control checks, and completes log, as per department policies and procedures). Under the direction of the Supervisor, Sterile Processing Department (SPD), the Sterile Processing Technician is responsible for ensuring that all instruments and equipment are properly decontaminated, assembled, inspected, packaged, sterilized, stored, distributed, and tracked in a quality/timely manner throughout the institute.
CNC Field Service Technician The Robert E. MorrisCNC Field Service TechnicianLowell, MassachusettsThe CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers.
Maintenance Technician FirstService CorpMaintenance TechnicianBoston, MA$38–$42 / hourRequesting Information About the AEDT - NYC Local Law 144: Candidates who reside in New York City and are subject to NYC Local Law 144 may request information about the AEDT, including details on the type of data collected, the sources of such data, and our data retention policies. Ability to work in a variety of environmental conditions, including exposure to outdoor temperatures, weather variations, traffic and equipment noise, equipment vibrations, vehicle and chemical fumes, cleaning solvents, grease, machinery with moving parts, and dust.
Boiler Technician General Dynamics CorpBoiler TechnicianPittsfield, MAWhile performing the duties of this job, the employee is required to stand; walk; and stoop, kneel, crouch, or crawl; and climb stairs and ladders or to use hands to feel; reach with hands and arms; climb and balance; and talk and hear for 8 hours a day. While performing the duties of this job, the employee may be exposed to some variation in work area temperature, wet and/or humid conditions, moving mechanical parts high precarious places, fumes or airborne particles, and potentially toxic or caustic chemicals.
Food Safety and Quality Technician (Night Shift) Ocean Spray Cranberries IncFood Safety and Quality Technician (Night Shift)MATeam members, farmers, consumers and communities alike--we value what makes us unique and strive to connect our farms to families for a better life by living our values: Grower Mindset - We embrace our grower-owners innovative spirit and heritage through confidence, learning and focus on the future. Requires good mathematical ability to perform quality related calculations, good analytical skills, and effective interpersonal communication skills to work constructively in a team environment.
HVAC Technician Smith CollegeHVAC TechnicianNorthampton, MAInspect, test, lubricate, clean, adjust and replace parts (such as fan belts, bearings, couplings, etc.) and repair and adjust varied types of mechanical-electrical equipment (such as fans, motors, pumps, compressors, filters, engines, generators, refrigeration equipment and controls, etc.) on a regular schedule or as assigned. Must have a minimum of five years of field experience in the maintenance, servicing, installation, set-up, calibration, troubleshooting and repair of all HVAC/R equipment and controls and thoroughly understand the interaction of such equipment with all related HVAC systems.
Lab Technician 1 Pace Analytical ServicesLab Technician 1East Longmeadow, MassachusettsAbility to work in a lab or office setting, remain standing for long periods while conducting tests, work around strong smells, and wear personal protective equipment while handling samples (lab coat, safety glasses, gloves — all provided by Pace®). Since 1978, we’ve continued developing innovative practices that drive sustainability and empower our partners with accurate quality data at every critical moment and milestone.
NewFacilities Technician III, Mon-Fri, Days Entegris IncFacilities Technician III, Mon-Fri, DaysBillerica, MA$30–$35 / hourThese tasks include managing daily hazardous waste shipments, performing satellite waste inspections, and various other facilities efforts. Physical requirements include stooping, standing, walking, climbing stairs / ladders and ability to lift / carry heavy loads of 50 lbs.
NewScience Lab Technician 2026/2027 Burlington Public SchoolsScience Lab Technician 2026/2027Burlington, MAInspect returned and stored equipment, such as glassware, balances, hot plates, burner tubing, and microscopes and coordinate or complete repair work, routine maintenance, cleaning, and calibration of laboratory equipment as needed. Key Responsibilities: Lab Preparation: Accurately prepare, set up, and/or test materials, chemical solutions, equipment, and specimens for student labs and teacher demonstrations.
NewResearch Lab Technician II NEUROLOGY HV Mass General BrighamResearch Lab Technician II NEUROLOGY HVBoston, MassachusettsCarries out a broad range of technically advanced research activities and procedures; evaluates conclusions and has considerable latitude to modify or devise methods and techniques as necessary to achieve desired results; typically supervises technical and sometimes administrative elements of the research unit. The framework is comprised of ten competencies (half People-Focused, half Performance-Focused) and are defined by observable and measurable skills and behaviors that contribute to workplace effectiveness and career success.
Pest Control Technician Braman Termite & Pest EliminationPest Control TechnicianMAOur technicians complete a structured, on-the-job training program alongside experienced professionals and receive ongoing support to stay current with industry advancements. We also provide a full certification program, including guidance from a board-certified entomologist, to help you successfully complete state licensing requirements and build your career in the field.
Manufacturing Technician II 2nd shift, 2 pm to 10:30 pm, Mon-Fri. Entegris IncManufacturing Technician II 2nd shift, 2 pm to 10:30 pm, Mon-Fri.Bedford, MA$24–$26 / hourResponsibilities include operating automated robots to manufacture products, assembling parts according to established procedures, and running high vacuum tools and hydraulic presses. The ideal candidate will be willing to cross train and support additional work areas as needed to meet business demands.
Production Technician Contractor - Second Shift Commonwealth Fusion Systems LLCProduction Technician Contractor - Second ShiftSomerville, MA$30–$41 / hourThe production technician is an integral part of the CFS team performing and monitoring the manufacturing processes required to build and test superconducting magnets. Dedication to safety to mitigate industrial hazards that may include heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, and cryogenicss.
Sanitation Technician - 3rd Shift Dairy Farmers of America IncSanitation Technician - 3rd ShiftFranklin, MAPerform cleaning procedures required by the Master Sanitation Schedule (MSS) and other required duties to maintain assigned areas and equipment sanitary and clean. Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements.
Quality Control Technician PhilipsQuality Control TechnicianBedford, MA$27.46–$43.94 / hourYou're the right fit if: You have a minimum of 2+ years experience in FDA/ISO 13485 regulated Medical Device manufacturing quality environments, with a focus on production controls, supporting validations, administering calibration, quality records, incoming/in-process/final Inspection, using hand tools and optical inspection systems. The Quality Control Technician is responsible for supporting highly complex quality control tasks to address manufacturing abnormalities, and coordinates quality control protocols while ensuring adherence to Good Laboratory Practices (GLP) and Good Manufacturing Practices (GMP).
Production Technician Contractor - Second Shift Commonwealth Fusion SystemsProduction Technician Contractor - Second ShiftSomerville, MA$30–$41 / hourJoin the power movement as a Production Technician Contractor The production technician is an integral part of the CFS team performing and monitoring the manufacturing processes required to build and test superconducting magnets. Dedication to safety to mitigate industrial hazards that may include heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, and cryogenicss.
Entry Level Lab Technician 1 Pace Analytical ServicesEntry Level Lab Technician 1East Longmeadow, MassachusettsAbility to work in a lab or office setting, remain standing for long periods while conducting tests, work around strong smells, and wear personal protective equipment while handling samples (lab coat, safety glasses, gloves — all provided by Pace®). Join us as a Lab Technician in our Organic Prep department, where you'll put your love of science to work in the sample preparation department of our environmental testing laboratory.
Food Safety And Quality Technician (Night Shift) Ocean SprayFood Safety And Quality Technician (Night Shift)Middleboro, MATeam members, farmers, consumers and communities alike--we value what makes us unique and strive to connect our farms to families for a better life by living our values: Grower Mindset- We embrace our grower-owners innovative spirit and heritage through confidence, learning and focus on the future. Requires good mathematical ability to perform quality related calculations, good analytical skills, and effective interpersonal communication skills to work constructively in a team environment.
Engraving Plating Technician INTERPRINT GmbHEngraving Plating TechnicianPittsfield, MA$19–$20 / hourThe qualified Engraving Plating Technician will have the following skills and abilities: JOB RESPONSIBILITIES: To encompass the following but not limited to: ENGRAVES CYLINDERS - By Engraving the line resolution and cell configuration specified using visual and microscopic evaluations of the cylinder surface and engraving; finishing the cylinders and chroming the cylinders after engraving; polishing and inspecting the cylinder surface. ENSURES OPERATION OF EQUIPMENT - Daily inspecting of the laser, finishstar, extraction system and chillers, zinc dissolving tank; carrying out all services required by the OEM including changing filters, laser lamps, cleaning the extraction chamber etc.
Quality Technician Bio-Techne CorpQuality TechnicianMA$23.20–$31.90 / hourIn addition to universal responsibilities, Quality Technician will have Devens site specific responsibilities including but not limited to: Performs facility monitoring tasks including: o Daily monitoring of temperature-controlled areas using calibrated devices. Why Join Bio-Techne: We offer competitive insurance benefits starting on day one: medical, dental, vision, life, short-term disability, long-term disability, pet, and legal and ID shield.
CUSTODIAN ICE TECHNICIAN Facilities Management & Planning Custodial Services Boston UniversityCUSTODIAN ICE TECHNICIAN Facilities Management & Planning Custodial ServicesBOSTON, MACUSTODIAN ICE TECHNICIAN Facilities Management & Planning Custodial Services Category: Charles River Campus --> Trades Job Location: BOSTON, MA, United States Tracking Code: 26500119690214 Posted Date: 22/02/26 Salary Grade: Grade 00 Expected Hiring Range Minimum: $29.00 Expected Hiring Range Maximum: $38.00 The salary of the finalist selected for this role will be set based on a variety of factors including but not limited to departmental budgets, qualifications, experience, education, licenses, specialty training, and internal pay comparison. Position Type: Full-Time/Regular Perform and assist in the organization of custodial services and ice maintenance at the Harry Agganis Arena and Fitness & Recreation Center at Boston University.
Lab Technician I, Analytics & Metrology Entegris IncLab Technician I, Analytics & MetrologyFranklin, MA$20.19–$26.44 / hourThe Laboratory Technician performs chemical testing, assists in problem solving and provides technical services to other Entegris functional groups and business units, and contributes to the design of research projects through setting up tests sample preparation and analysis with supervision. Job Description: The Role: Our site in Franklin, MA is seeking a Lab Technician to join our Analytical Services Lab in our AMC business unit.
Manufacturing Technician Entegris IncManufacturing TechnicianBillerica, MA$25–$29 / hourThe Role: The Manufacturing Technician position is responsible for operating and maintaining UPE Membrane equipment and operation of machines through various tasks such as Extrusion, Extraction, Annealing, Surface Modification, inspecting, trimming, and packaging membrane products. Finalizes all required paperwork thoroughly and in timely (i.e. Production Reports, Labels, Component Sheets, Rework Sheets, SAP Transactions etc.).