FULL_TIME

FEED

UNKNOWN

Bachelor's degree in Science, Technology, Engineering, Mathematics (STEM), or a related technical discipline with 8+ years of relevant professional experience , or an advanced degree in a related field with 5+ years of relevant experience . This opportunity is ideal for a highly skilled software engineer who enjoys hands-on development, solving complex technical challenges, and leading software solutions that directly support sophisticated electronic systems.

Legion Technical Solutions LLC

Software Test Equipment Engineer 3

Working with a cross-discipline team, the candidate must have experience developing, testing, and integrating software for edge or embedded devices and/or subsystems (like telecom, medical, IoT, automotive, or robotics) where hardware operation, time critical function, functional reliability, mission assurance, and safety might be major concerns. Our Senior Principal Embedded Real-Time Software Developer/Integrator is a technical position that works in an Integrated Product Team (IPT) environment to architect, design, implement, test, debug, and deploy Software for Firmware (FPGA) and Hardware solutions that meet current and next generation autonomous avionics systems' needs.

RTX Corp

Sr Principal Real-time Software Engineer

The EAP Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Experience with analog electronics design, including at least one of the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.

Principal Motor Controls Design Engineer

Assignments may include guiding a team through several phases of hardware systems lifecycle such as designs and analysis; architecting new electronic systems; developing and documenting subsystem requirements and test plans; peer reviews of designs as a subject matter expert; presentations to peers, management, and government customers; and root-cause failure investigations. Qualifications We Value: Missile guidance electronics subsystems typically contain antennas, analog RF circuit cards, digital circuit cards, and configurable logic so the ideal candidate will have a background in designing and troubleshooting of one or more of these components.

Principal Subsystem Engineer

Working with a cross-discipline team, the candidate must have experience developing, testing, and integrating software for edge or embedded devices and/or subsystems (like telecom, medical, IoT, automotive, or robotics) where hardware operation, time critical function, functional reliability, mission assurance, and safety might be major concerns. Our Principal Embedded Real-Time Software Developer/Integrator is a technical position that works in an Integrated Product Team (IPT) environment to architect, design, implement, test, debug, and deploy Software for Firmware (FPGA) and Hardware solutions that meet current and next generation autonomous avionics systems' needs.

Principal Real-time Software Engineer

Motor Controls Engineer II

You'll work alongside talented software engineers, systems engineers, product owners, testers, and mission stakeholders to transform challenging operational requirements into responsive, intuitive, accessible, and technically sound experiences. Join Leidos on the Chinook Program, supporting an Intelligence Community customer, and help design and deliver modern user interfaces that enable mission users to interact with sophisticated systems and data more effectively.

YEAR

SAIC is a premier Fortune 500® technology integrator driving our nation's digital transformation. Our robust portfolio of offerings across the defense, space, civilian, and intelligence markets includes secure high-end solutions in engineering, IT modernization, and mission solutions. Using our expertise and understanding of existing and emerging technologies, we integrate the best components from our own portfolio and our partner ecosystem to deliver innovative, effective, and efficient solutions that are critical to achieving our customers' missions.

We are a team of 26,000 strong driven by mission, united purpose, and inspired by opportunity. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $7.1 billion. For more information, visit saic.com.

Leidos Holdings Inc

Senior UI/UX Engineer

This role bridges algorithm design and hardware, developing the embedded navigation filter, guidance logic, and autopilot control laws on the flight computer, along with the SIL and HIL infrastructure required to verify GNC performance end-to-end from algorithm through silicon. Tiberius Aerospace Inc. participates in E-Verify and will provide the federal government with your I-9 Form information to confirm that you are authorized to work in the U.S. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information.

Tiberius Aerospace

GNC Embedded Engineer

ea_via_bold

SYSTEM DESIGN: Experience performing analog, digital, and/or RF designs at subsystem or system levelExperience with commonly used electrical engineering design and analysis tools including but not limited to: Creo Schematic, Mentor Capital, Altium, DX DesignerSOFTWARE/COMM: Basic or introductory knowledge of common software languages (C/C++/C#) to a level of reading/following code for EEs. You Must Have• Requires a Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five (5) years of prior relevant experience OR an Advanced degree and three (3) years of relevant experience Required:Experience with factory/laboratory test instrumentation, electronics (Ex.

Associates Systems

Electrical Engineer - Test Systems Design (LabView)

HOUR

Responsibilities to Anticipate: Design and deliver production quality FPGA releases from initial proof of concept up to production Architect FPGA based systems to determine parts, interfaces, and Concept of Operations (CONOPS) Translate system level requirements into FPGA requirements Design and code in VHDL for reliability and maintainability Verify designs utilizing self-checking techniques with directed and constrained random tests, while tracking functional and code coverage Help drive projects and execute to program schedules on time and budget Create complete documentation including requirements, verification plan, and user's guides. Designers work with circuit card designers and systems engineers to develop requirements, architect new parts, collaborative modeling of algorithms, partition and perform code development, simulation, and place and route.

Donatech Corporation

Software Engineer

jobdiva

While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. REQUIRED EXPERIENCE: Typically requires a Bachelor's Degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 8 years prior relevant experience, or an Advanced degree in a related field and minimum 5 years experience.

<h2>About TCM</h2>
If you would like to…
<ul>
<li>Develop your skills</li>
<li>Improve your earnings potential</li>
<li>Gain greater control over your career</li>
</ul>
 The Computer Merchant, Ltd. (TCM) has provided Information Technology Solutions and enterprise staffing services to Fortune 1000, mid to small sized corporations, as well as Federal, state, and local governments for over 30 years. At The Computer Merchant (TCM), we are committed to your professional and financial success. We'll evaluate your background, experience and qualifications, and then recommend contract jobs that are the best match for your goals. Fast Facts & Recognition:
<ul>
<li>41 year track record of success deploying over 63,000 consultants and core employees in critical positions for Fortune 1000 companies</li>
<li>Access to over 11 million unique consultants nationwide</li>
<li>Centralized and dedicated client delivery team</li>
<li>Supplier Diversity Certification as a Veteran Business Enterprise</li>
</ul>

The Computer Merchant, Ltd

System development can include algorithm design, data analysis, hardware control, computational optimization, RF system modeling, field testing, error budget analysis, operational performance analysis, writing efficient software, testing with real data, and providing applications to front-line customer facilities. RRC personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M, and experience the direct mission feedback from the customer and seeing your project provide real-world contributions that make a significant difference.

Rincon Research Corp

DSP Engineer 1

Working collaboratively across multidisciplinary teams, you will apply rigorous engineering processes to solve complex hardware challenges, engineer high-reliability circuit card assemblies (CCAs), and advance solutions from design through lab integration. Experience or coursework with one or more of the following: RF, Microwave, Analog, Digital Electronics, Mixed Signal, Circuit Design or Analysis, Power Electronics, VHDL, FPGA, Electrical Components, Digital Signal Processing, or PCB design.

Electrical Engineer II – Hardware Engineering

Electrical Engineer I – Hardware Engineering

Rincon Research Corporation (RRC) seeks a talented, tenacious, results driven individual to work in a multi-disciplinary R&D environment with likeminded motivated electrical engineers, mathematicians, and computer scientists who are collectively responsible for creating custom geolocation and digital communications systems in support of national security defense. Core responsibilities include designing real-time cloud processing solutions, implementing advanced signal processing and geolocation algorithms with efficient software, testing with real data, and providing applications to front-line customer facilities.

Sr. Software Engineer

Review and approve engineering design documents such as vendor drawings, test procedures, acceptance test procedures, qualification reports and certification documents. You possess basic knowledge in the pneumatics field and interfacing technical disciplines such as system installation, avionics, power plant and others.

Kaleidoscope Animations (Inactive)

Air Systems/Pneumatics Engineer

This role supports the FPGA lifecycle from requirements and architecture through VHDL coding, simulation, place-and-route, integration, debug, and production release support. Support FPGA designs involving RF/EO DSP, controls, data links, embedded processing, processor interfaces, and gigabit serial interfaces.

Principal FPGA Engineer (DOD cleared)

Additional Desired Skills/Competencies: The ideal Firmware Engineer candidate will have demonstrated proficiency in the following areas: Communication protocols such as I2C, SPI, and UART and wireless protocols such as Bluetooth and TCP/IP. At Mesa Labs we're passionate about protecting the vulnerable by enabling scientific breakthroughs, ensuring product integrity, increasing patient and worker safety, and improving quality of life around the world.

Mesa Laboratories Inc

Firmware Engineer

Designs are implemented using VHDL for the following applications: gigabit serial interfaces, Radio Frequency (RF) and Electro Optical (EO) DSP, controls, data links, embedded processing and processor interfaces. Designers work with circuit card designers and systems engineers to develop requirements, architect new parts, collaborative modeling of algorithms, code development, simulation, and place and route.

Butler America Aerospace LLC

FPGA Engineer - P3

Core responsibilities include designing real-time cloud processing solutions, implementing advanced signal processing and geolocation algorithms with efficient software, testing with real data, and providing applications to front-line customer facilities. RRC personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M, and experience the direct mission feedback from the customer and seeing your project provide real-world contributions that make a significant difference.

Assistant Store Manager Jobs in Mississippi

Software Test Equipment Engineer 3 Legion Technical Solutions LLC

Sr Principal Real-time Software Engineer RTX Corp

Principal Motor Controls Design Engineer RTX Corp

Principal Subsystem Engineer RTX Corp

Principal Real-time Software Engineer RTX Corp

Motor Controls Engineer II RTX Corp

Senior UI/UX Engineer Leidos Holdings Inc

GNC Embedded Engineer Tiberius Aerospace

Electrical Engineer - Test Systems Design (LabView) Associates Systems

Software Engineer Donatech Corporation

Software Engineer The Computer Merchant, Ltd

DSP Engineer 1 Rincon Research Corp

Electrical Engineer II – Hardware Engineering RTX

Electrical Engineer I – Hardware Engineering RTX

Sr. Software Engineer Rincon Research Corp

Air Systems/Pneumatics Engineer Kaleidoscope Animations (Inactive)

Principal FPGA Engineer (DOD cleared) Associates Systems

Firmware Engineer Mesa Laboratories Inc

FPGA Engineer - P3 Butler America Aerospace LLC

Jr. Software Engineer Rincon Research Corp

Similar Job Searches

Stand out to leading employers.